drm/mgag200: Fix gamma lut not initialized for G200ER, G200EV, G200SE

When mgag200 switched from simple KMS to regular atomic helpers,
the initialization of the gamma settings was lost.
This leads to a black screen, if the bios/uefi doesn't use the same
pixel color depth.
This has been fixed with commit ad81e23426a6 ("drm/mgag200: Fix gamma
lut not initialized.") for most G200, but G200ER, G200EV, G200SE use
their own version of crtc_helper_atomic_enable() and need to be fixed
too.

Fixes: 1baf9127c482 ("drm/mgag200: Replace simple-KMS with regular atomic helpers")
Cc: <stable@vger.kernel.org> #v6.1+
Reported-by: Roger Sewell <roger.sewell@cantab.net>
Suggested-by: Roger Sewell <roger.sewell@cantab.net>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231214163849.359691-1-jfalempe@redhat.com

drm/mgag200: Implement struct drm_plane_helper_funcs.atomic_enable

Enable the primary plane for mgag200 hardware via atomic_enable.
Atomic helpers invoke this callback only when the plane becomes
active.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209154107.30680-5-tzimmermann@suse.de

drm/fb-helper: Remove unnecessary include statements

Remove include statements for <drm/drm_fb_helper.h> where it is not
required (i.e., most of them). In a few places include other header
files that are required by the source code.

v3:
* fix amdgpu include statements
* fix rockchip include statements

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-23-tzimmermann@suse.de

drm/mgag200: Remove type field from struct mga_device

Each model's specific code is located in a separate file. The type
field in struct mga_device is no unused. Remove it.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-15-tzimmermann@suse.de

drm/mgag200: Move CRTC atomic_enable to model-specific code

The CRTC atomic_enable helper contains per-model branches for
G200ER, G200EV and G200SE devices. Implement a dedicated helper
for each of them and remove the branches from the shared helper.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-14-tzimmermann@suse.de

drm/mgag200: Move mode-config to model-specific code

Move the mode-config code into model-specific code and call the
plane/CRTC helpers as needed. This will help with providing per-
model implementations of individual helpers.

Duplication of the pipeline init function is accepted. Some macros
simplify this for shared helpers.

v3:
* clean up style

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-13-tzimmermann@suse.de

drm/mgag200: Provide per-device callbacks for PIXPLLC

Move the PIXPLLC code into per-model source files and wire it up
with per-model callbacks. No functional changes.

The PIXPLLC pixel-clock is part of the CRTC, but really separate
hardware that varies with each model of the G200. Move the PIXPLLC
code for each model into the per-model source file and call it from
CRTC helpers via device functions.

This allows to remove struct mgag200_pll and the related code. The
new callbacks behave like the CRTC's atomic_check and atomic_enable
functions.

v3:
* clean up style

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-12-tzimmermann@suse.de

drm/mgag200: Provide per-device callbacks for BMC synchronization

Move the BMC-related code into its own file and wire it up with device
callbacks.

While programming a new display mode, G200EW3 and G200WB have to de-
synchronize with the BMC. Synchronization is done via VIDRST pins
and controlled via VRSTEN and HRSTEN bits. Move the BMC code behind
a serviceable interface and call it from the CRTC's enable and
disable functions.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-11-tzimmermann@suse.de

drm/mgag200: Add per-device callbacks

While currently empty, the device callbacks will allow mgag200's
modesetting code to interact with the BMC and PIXPLLC.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-10-tzimmermann@suse.de

drm/mgag200: Replace simple-KMS with regular atomic helpers

Drop simple-KMS in favor of regular atomic helpers. Makes the code
more modular and hence better to adapt to per-model requirements.

The simple-KMS helpers provide few extra features, so the patch is
mostly about open-coding what simple-KMS does. The simple-KMS helpers
do mix up plane and CRTC state. Changing to regular atomic helpers
requires to split some of the simple-pipe functions into per-plane
and per-CRTC code

No functional changes.

v3:
* always run drm_atomic_helper_check_plane_state()
* clean up style

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-8-tzimmermann@suse.de

drm/mgag200: Store primary plane's color format in CRTC state

Store the primary plane's color format in the CRTC state and use
it for programming the CRTC's gamma LUTs.

Gamma tables (i.e., color management) are provided by the CRTC, but
depend in the primary plane's color format. Store the format in the
CRTC state and use it. This has not been an issue with simple-KMS
helpers, which mix-up plane and CRTC state to some extent. For using
regular atomic helpers, it's necessary to distinguish between the two.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-6-tzimmermann@suse.de

drm/mgag200: Move DAC-register setup into model-specific code

Provide an init function for each model's DAC registers. Remove
the shared helper.

The code for initializing the DAC registers consisted of a large
table of default value, plus many exceptions for the various G200
models. Providing a per-model implementation makes if more readable.
At some point, some of the initialization should probably move into
the modesetting code.

v2:
* don't duplicate DAC values unnecessarily (Sam, Jocelyn)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-3-tzimmermann@suse.de

drm/mgag200: Store positions of I2C data and clock bits in device info

The bits for accessing I2C data and clock channels varies among
models. Store them in the device-info structure for consumption
by the DDC code.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-11-tzimmermann@suse.de

drm/mgag200: Store vidrst flag in device info

Set new vidrst flag in device info for models that synchronize with
external sources (i.e., BMCs). In modesetting, set the corresponding
bits from the device-info flag.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-10-tzimmermann@suse.de

drm/mgag200: Store maximum resolution and memory bandwidth in device info

The maximum resolution and memory bandwidth are model-specific limits.
Both are used during display-mode validation. Store the values in struct
mgag200_device_info and simplify the validation code.

v2:
* 'bandwith' -> 'bandwidth' in commit message

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-9-tzimmermann@suse.de

drm/mgag200: Store HW_BUG_NO_STARTADD flag in device info

Flag devices with broken handling of the startadd field in
struct mgag200_device_info, instead of PCI driver data. This
reduces the driver data to a simple type constant.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-8-tzimmermann@suse.de

drm/mgag200: Add struct mgag200_device_info

While currently empty, struct mgag200_device_info, will provide static,
constant information on each device model.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-7-tzimmermann@suse.de

drm/mgag200: Implement new init logic

Rework mgag200_regs_init() and mgag200_mm_init() into device preinit
and init functions. The preinit function, mgag200_device_preinit(),
requests and maps a device's I/O and video memory. The init function,
mgag200_device_init() initializes the state of struct mga_device.
Splitting the initialization between the two functions is necessary
to perform per-model operations between the two calls, such as reading
the unique revision ID on G200SEs.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-6-tzimmermann@suse.de

drm/mgag200: Call mgag200_device_probe_vram() from per-model init

Call mgag200_device_probe_vram() from each model's initializer. The
G200EW3 uses a special helper with additional instructions.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-5-tzimmermann@suse.de

drm/mgag200: Move PCI-option setup into model-specific code

Split the PCI code into a single call for each model. G200 and G200SE
each contain a dedicated helper with additional instructions. Noteably,
the G200ER has no code for PCI setup.

In a later patch, the magic numbers should be replaced by descriptive
constants.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-4-tzimmermann@suse.de

drm/mgag200: Initialize each model in separate function

Add a separate initializer function for each model. Add separate
devic structures for G200 and G200SE, which require additional
information.

Also move G200's and G200SE's helpers for reading the BIOS and
version id into model-specific code.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-3-tzimmermann@suse.de

drm/mgag200: Remove struct mga_connector

struct mga_connector has outlived its purpose. Inline the rsp init
helper into the mode-config code and remove the data structure. No
functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220516134343.6085-6-tzimmermann@suse.de

drm/mgag200: Switch I2C code to managed cleanup

Store the I2C state within struct mga_device and switch I2C to
managed release. Simplifies the related code and lets us remove
mga_connector_destroy().

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220516134343.6085-5-tzimmermann@suse.de

drm/mgag200: Protect concurrent access to I/O registers with lock

Add a mutex lock to protect concurrent access to I/O registers
against each other. This happens between invocation of commit-
tail functions and get-mode operations. Both with use the CRTC
index registers MGA1064_GEN_IO_DATA and MGA1064_GEN_IO_CTL.
Concurrent access can lead to failed mode-setting operations.

v2:
* fix typo in commit description (Jocelyn)
* add comment to explain rmmio_lock

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220502142514.2174-4-tzimmermann@suse.de

drm/mgag200: Use managed interfaces for framebuffer write combining

Replace arch_phys_wc_add() and arch_io_reserve_memtype_wc() with
the rsp managed functions. Allows for removing the cleanup code
for memory management

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916181601.9146-5-tzimmermann@suse.de

drm/mgag200: Compute PLL values during atomic check

PLL setup can fail if the display mode's clock is not supported by
any PLL configuration. Compute the PLL values during atomic check, so
that atomic commits can fail at the appropriate time. If successful,
use the values in the atomic-update phase.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-14-tzimmermann@suse.de

drm/mgag200: Introduce custom CRTC state

Inherit from struct drm_crtc_state by embeding it and providing the
rsp callbacks for simple-kms helpers. No functional changes.

The new state struct mgag200_crtc_state will hold PLL values for modeset
operations.

v2:
* move the simple-kms changes into a separate patch (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-13-tzimmermann@suse.de

drm/mgag200: Abstract pixel PLL via struct mgag200_pll

Move all PLL compute and update functions into mgag200_pll.c. No
functional changes to the rsp algorithms.

Introduce struct mgag200_pll and mgag200_pll_funcs. The data strutures
abstract the details of each revision's PLL. Perform calls to compute
and update functionality via function pointers. Init the PLL once as
part of the driver initialization.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-11-tzimmermann@suse.de

drm/mgag200: Split PLL setup into compute and update functions

The _set_plls() functions compute a pixel clock's PLL values
and program the hardware accordingly. This happens during atomic
commits.

For atomic modesetting, it's better to separate computation and
programming from each other. This will allow to compute the PLL
value during atomic checks and catch unsupported modes early.

Split the PLL setup into a compute and an update functions, and
call them one after the other. Computed PLL values are store in
struct mgag200_pll_values. There are four parameters for the PLL,
m, n, p and s. Every compute function stores a value for each
of these parameters, and the rsp update function makes the register
bits from them. The values stored by the compute function are
either plain values or register bits. An additional change is
required to always store plain values.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-5-tzimmermann@suse.de

drm/mgag200: Select clock in PLL update functions

Put the clock-selection code into each of the PLL-update functions to
make them select the correct pixel clock. Instead of copying the code,
introduce a new helper WREG_MISC_MASKED, which does masked writes into
<MISC>. Use it from each individual PLL update function.

The pixel clock for video output was not actually set before programming
the clock's values. It worked because the device had the correct clock
pre-set.

v2:
* don't duplicate <MISC> update code (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: db05f8d3dc87 ("drm/mgag200: Split MISC register update into PLL selection, SYNC and I/O")
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.9+
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-2-tzimmermann@suse.de

drm/mgag200: Constify LUT for programming bpp

Declare constant LUT for bpp programming as static const. Removes mutable
data from device structure.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702075642.27834-5-tzimmermann@suse.de

drm/mgag200: Extract device type and flags in mgag200_pci_probe()

The type and flags values are stored in the PCI ID list. Extract them
in the probe function. Makes the device initialization more readable.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702075642.27834-4-tzimmermann@suse.de

drm/mgag200: Add support for G200 desktop cards

This patch adds support for G200 desktop cards. We can reuse the whole
memory and modesetting code. A few PCI and DAC register values have to
be updated accordingly.

The most significant change is in the PLL setup. The driver parses the
device's BIOS to retrieve clock limits and reference clocks. With no BIOS
found, safe defaults are being used.

v2:
* copy BIOS ROM to system memory and access with regular
load/store; resolves potential HW limitations
* fix some stray whitespaces

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Co-developed-by: Egbert Eich <eich@suse.com>
Signed-off-by: Egbert Eich <eich@suse.com>
Co-developed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-9-tzimmermann@suse.de

drm/mgag200: Move G200SE's unique id into model-specific data

The unique revision id is only useful for G200SE devices. Store the
value in model-specific data within struct mga_device. While at it,
the patch also adds an init helper for the value.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-8-tzimmermann@suse.de

drm/mgag200: Initialize PCI registers early during device setup

So far, PCI option registers were initialized as part of modesetting,
which is late in the process. As these registers control fundamental
operation, they should be set early.

The patch moves the PCI option handling into device register setup,
before even the device MMIO memory is being mapped. No functional
changes made.

Moving the PCI code next to the device-register setup also allows to
remove the has_sdram field from struct mga_device. The state is now
local to the init helper.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-4-tzimmermann@suse.de

drm/mgag200: Don't write-protect CRTC 0-7 while in mga_crtc_prepare()

The prepare function write-protects several registers that it doesn't
even touch. Removed the related code.

The code for unprotecting registers also clears VINT interrupts. Both
is now done once during initialization.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707082411.6583-2-tzimmermann@suse.de

drm/mgag200: Embed instance of struct drm_device in struct mga_device

Following current best practice, the instance of struct drm_device is now
embedded in struct mga_device. The respective field has been renamed from
'dev' to 'base' to reflect the relationship. Conversion from DRM device is
done via upcast. Using dev_private is no longer possible.

The patch also open-codes drm_dev_alloc() and DRM device initialization
is now performed by a call to drm_device_init().

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-14-tzimmermann@suse.de

drm/mgag200: Move device init and cleanup to mgag200_drv.c

Moving the initializer and cleanup functions for device instances
to mgag200_drv.c prepares for the conversion to managed code. No
functional changes are made. Remove mgag200_main.c, which is now
empty.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-11-tzimmermann@suse.de

drm/mgag200: Switch to managed MM

The memory-management code now cleans up automatically as part of
device destruction.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-8-tzimmermann@suse.de

drm/mgag200: Rename mgag200_ttm.c to mgag200_mm.c

The mgag200 driver does not use TTM any longer. Rename the related file
to mgag200_mm.c (as in 'memory management').

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-5-tzimmermann@suse.de

drm/mgag200: Remove declaration of mgag200_mmap() from header file

Commit 94668ac796a5 ("drm/mgag200: Convert mgag200 driver to VRAM MM")
removed the implementation of mgag200_mmap(). Also remove the declaration.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: 94668ac796a5 ("drm/mgag200: Convert mgag200 driver to VRAM MM")
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Armijn Hemel <armijn@tjaldur.nl>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: <stable@vger.kernel.org> # v5.3+
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-2-tzimmermann@suse.de

drm/mgag200: Replace VRAM helpers with SHMEM helpers

The VRAM helpers managed the framebuffer memory for mgag200. This came
with several problems, as some MGA device require the scanout address
to be located at VRAM offset 0. It's incompatible with the page-flip
semantics of DRM's atomic modesettting. With atomic modesetting, old and
new framebuffers have to be located in VRAM at the same time. So at least
one of them has to reside at a non-0 offset.

This patch replaces VRAM helpers with SHMEM helpers. GEM SHMEM buffers
reside in system memory, and are shadow-copied into VRAM during page
flips. The shadow copy always starts at VRAM offset 0.

v2:
* revert dev->pdev changes

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-16-tzimmermann@suse.de

drm/mgag200: Use simple-display data structures

The MGA CRTC data structure struct mga_crtc contains unused additional
fields; so it can removed. The standard DRM CRTC and encoder structures
are embedded now in struct drm_simple_display_pipe. Done in preparation
of converting mgag200 to simple KMS helpers.

v3:
* remove now-unused define MGAG200FB_CONN_LIMIT
* remove unused define MATROX_DPMS_CLEARED

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-14-tzimmermann@suse.de

drm/mgag200: Remove out-commented suspend/resume helpers

The suspend/resume helpers are unused. Also remove associated state
from struct mga_device.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-13-tzimmermann@suse.de

drm/mgag200: Move TAGFIFO reset into separate function

The TAGFIFO state is now reset in mgag200_g200er_reset_tagfifo().

v2:
* define MGAREG_SEQ1_SCROFF

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-10-tzimmermann@suse.de

drm/mgag200: Clean up mga_set_start_address()

All register names and fields are now named according to the
MGA programming manuals. The function doesn't need the CRTC, so
callers pass in the device structure directly. The logging now
uses device-specific macros.

The original implementation busy-waited for the VSYNC flag to go
up, to synchronize the page flip with the display's vblank. This
code has been moved to mga_crtc_mode_set_base(). It's still present
in the non-atomic code paths, but won't be used in atomic commits.
With atomic, we should use interrupts to synchronize with vblanks.

v3:
* clarify commit message wrt. vblank busy-waiting
v2:
* use to_mga_device()
* use MiB instead of MB
* replace empty while loop with do-while, fixes checkpatch warning
* replace uint{8,32}_t with u{8,32}

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-3-tzimmermann@suse.de

drm/mgag200: Remove HW cursor

The HW cursor of Matrox G200 cards only supports a 16-color palette
format. Univeral planes require at least ARGB or a similar component-
based format, so remove the HW cursor.

Alternatively, the driver could dither a cursor image from ARGB to
16 colors. But this does not produce pleasent-looking results in
general, so it's useless for modern compositors.

Without HW support, compositors will use software rendering.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-2-tzimmermann@suse.de

drm/mgag200: Embed connector instance in struct mga_device

Storing the connector instance in struct mga_device avoids some
dynamic memory allocation. On errors, the connector's initializer
function now destroys the i2c structure. Done in preparation of
converting mgag200 to simple-KMS helpers.

v2:
* improved commit message (Michael)
* fixed error message for mgag200_vga_connector_init() (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507090315.21274-7-tzimmermann@suse.de

drm/mgag200: Remove unused fields from struct mga_device

The fields mode_info, num_crtcs and mode in struct mga_device serve
no purpose. Remove them.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507090315.21274-6-tzimmermann@suse.de

drm/mgag200: Use managed mode-config initialization

Mode configuration is now cleanued up automatically. While at it,
move all mode-config code into mgag200_mode.c. Done in preparation
of switching mgag200 to simple-KMS helpers.

v2:
* improve commit message (Sam)
* rebased during cherry pick
* also move bpp_shift initialization

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507090315.21274-5-tzimmermann@suse.de

drm/mgag200: Convert struct drm_device to struct mga_device with helper

Mgag200 uses dev_private to look up struct mga_device for instances
of struct drm_device. Use of dev_private is deprecated, so hide it in
the helper function to_mga_device().

v2:
* make to_mga_device() a function (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507090315.21274-2-tzimmermann@suse.de

drm/mgag200: Use simple encoder

The mgag200 driver uses an empty implementation for its encoder. Replace
the code with the generic simple encoder.

v4:
* print error message with drm_err()
v3:
* init pre-allocated encoder with drm_simple_encoder_init()
v2:
* rebase onto new simple-encoder interface

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228081828.18463-4-tzimmermann@suse.de

drm/mgag200: Add workaround for HW that does not support 'startadd'

There's at least one system that does not interpret the value of
the device's 'startadd' field correctly, which leads to incorrectly
displayed scanout buffers. Always placing the active scanout buffer
at offset 0 works around the problem.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: John Donnelly <john.p.donnelly@oracle.com>
Tested-by: John Donnelly <john.p.donnelly@oracle.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 81da87f63a1e ("drm: Replace drm_gem_vram_push_to_system() with kunmap + unpin")
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: "Y.C. Chen" <yc_chen@aspeedtech.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "José Roberto de Souza" <jose.souza@intel.com>
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.3+
Link: https://gitlab.freedesktop.org/drm/misc/issues/7
Link: https://patchwork.freedesktop.org/patch/msgid/20191126101529.20356-4-tzimmermann@suse.de

drm/mgag200: Store flags from PCI driver data in device structure

The flags field in struct mga_device has been unused so far. We now
use it to store flag bits from the PCI driver.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 81da87f63a1e ("drm: Replace drm_gem_vram_push_to_system() with kunmap + unpin")
Cc: John Donnelly <john.p.donnelly@oracle.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: "Y.C. Chen" <yc_chen@aspeedtech.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "José Roberto de Souza" <jose.souza@intel.com>
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.3+
Link: https://patchwork.freedesktop.org/patch/msgid/20191126101529.20356-3-tzimmermann@suse.de

drm/mgag200: Extract device type from flags

Adds a conversion function that extracts the device type from the
PCI id-table flags. Allows for storing additional information in the
other flag bits.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 81da87f63a1e ("drm: Replace drm_gem_vram_push_to_system() with kunmap + unpin")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: John Donnelly <john.p.donnelly@oracle.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: "Y.C. Chen" <yc_chen@aspeedtech.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: "José Roberto de Souza" <jose.souza@intel.com>
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.3+
Link: https://patchwork.freedesktop.org/patch/msgid/20191126101529.20356-2-tzimmermann@suse.de

drm/mgag200: Allocate cursor BOs at high end of video memory

By putting cursor BOs at the high end of the video memory, we can avoid
memory fragmentation. Starting at the low end, contiguous video memory is
available for framebuffers.

The patch also simplifies the buffer swapping and aligns it with the
ast driver. If there are more drivers with similar requirements, the
code could be moved into a shared place.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927091301.10574-8-tzimmermann@suse.de

drm/mgag200: Reserve video memory for cursor plane

The double-buffered cursor image is currently stored in video memory
by creating two BOs and pinning them to VRAM. The exact location is
chosen by VRAM helpers. The pinned cursor BOs can conflict with
framebuffer BOs and prevent the primary plane from displaying its
framebuffer.

As a first step to solving this problem, we reserve dedicated space at
the high end of the video memory for the cursor images. As the amount
of video memory now differs from the amount of available framebuffer
memory, size tests are adapted accordingly.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927091301.10574-7-tzimmermann@suse.de

drm/mgag200: Add init and fini functions for cursor handling

Moving the cursor initialization and cleanup into separate functions
makes the overall code slightly more readable.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927091301.10574-3-tzimmermann@suse.de

drm/mgag200: Rename cursor functions to use mgag200_ prefix

Although the driver source code is fairly inconsistent wrt naming, the
prefix should be mgag200. Rename cursor functions accordingly.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927091301.10574-2-tzimmermann@suse.de

drm/vram: Move VRAM memory manager to GEM VRAM implementation

The separation between GEM VRAM objects and the memory manager is
artificial, as they are only used with each other. Copying both
implementations into the same file is a first step to simplifying
the code.

This patch only moves code without functional changes.

v3:
* update to use dev->vma_offset_manager
v2:
* update for debugfs support
* typos in commit message

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911110910.30698-2-tzimmermann@suse.de

drm/mgag200: Replace struct mga_fbdev with generic framebuffer emulation

This patch replaces mgag200's framebuffer console with DRM's generic
implememtation. All respective code is being removed from the driver.

The console is set up with a shadow buffer. The actual buffer object is
not permanently pinned in video ram, but just another buffer object that
the driver moves in and out of vram as necessary. The driver's function
mga_crtc_do_set_base() used to contain special handling for the framebuffer
console. With the new generic framebuffer, the driver does not need this
code an longer.

For consistency, this patch also changes the preferred framebuffer depth.
The original code used 24 bpp by default and 32 bpp for the framebuffer. As
24 bpp is not well supported by userspace anyway, setting 32 bpp as default
makes sense.

v2:
* rely on fbdev helpers error messages
* document changes to preferred depth
* dirty function no longer required

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/315832/

drm/mgag200: drop use of drmP.h

Drop use of the deprecated drmP.h header file.
Replace with necessary include files to fix build.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20190623103542.30697-5-sam@ravnborg.org

drm/mgag200: Replace struct mga_framebuffer with GEM framebuffer helpers

The mgag200 driver's struct mga_framebuffer is a buffer object with GEM
interface. There are already GEM framebuffer helpers that implement the
same functionality. Convert mgag200 to these.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190627080909.30471-1-tzimmermann@suse.de

drm/mgag200: Rewrite cursor handling

The cursor handling in mgag200 is complicated to understand. It touches a
number of different BOs, but doesn't really use all of them.

Rewriting the cursor update reduces the amount of cursor state. There are
two BOs for double-buffered HW updates. The source BO updates the one that
is currently not displayed and then switches buffers. Explicit BO locking
has been removed from the code. BOs are simply pinned and unpinned in video
RAM.

v2:
* pin cursor BOs to current location

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-8-tzimmermann@suse.de

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 377

Based on 1 normalized pattern(s):

this file is subject to the terms and conditions of the gnu general
public license version 2 see the file copying in the main directory
of this archive for more details

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 9 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531081036.888539456@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/mgag200: Replace mapping code with drm_gem_vram_{kmap/kunmap}()

The mgag200 driver establishes several memory mappings for frame buffers
and cursors. This patch converts the driver to use the equivalent
drm_gem_vram_kmap() functions. It removes the dependencies on TTM
and cleans up the code.

v4:
* cleanups from checkpatch.pl

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20190508082630.15116-17-tzimmermann@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/mgag200: Convert mgag200 driver to VRAM MM

The data structure |struct drm_vram_mm| and its helpers replace mgag200's
TTM-based memory manager. It's the same implementation; except for the type
names.

v4:
* don't select DRM_TTM or DRM_VRAM_MM_HELPER
v3:
* use drm_gem_vram_mm_funcs
* convert driver to drm_device-based instance
v2:
* implement mgag200_mmap() with drm_vram_mm_mmap()

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20190508082630.15116-16-tzimmermann@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/mgag200: Convert mgag200 driver to |struct drm_gem_vram_object|

The data structure |struct drm_gem_vram_object| and its helpers replace
|struct mgag200_bo|. It's the same implementation; except for the type
names.

v4:
* cleanups from checkpatch.pl
* select config option DRM_VRAM_HELPER

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20190508082630.15116-15-tzimmermann@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/mga200g: Use drm_fb_helper_fill_info

Only changes the name of the fb from "mgadrmfb" to "mga200drmfb".

v2: Rebase

v3: Note the name change (Noralf)

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Junwei Zhang <Jerry.Zhang@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326132008.11781-12-daniel.vetter@ffwll.ch

drm/ttm: Define a single DRM_FILE_PAGE_OFFSET constant

Most TTM drivers define the constant DRM_FILE_PAGE_OFFSET of the same
value. The only exception is vboxvideo, which is being converted to the
new offset by this patch. Unifying the constants in a single place
simplifies the driver code.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: initialize globals during device init (v2)

Make sure that the global BO state is always correctly initialized.

This allows removing all the device code to initialize it.

v2: fix up vbox (Alex)

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: use a static ttm_mem_global instance

As the name says we only need one global instance of ttm_mem_global.

Drop all the driver initialization and just use a single exported
instance which is initialized during BO global initialization.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm: mgag200: remove dead code and pointless local lut storage

The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-11-peda@axentia.se

drm/mgag200: Added support for the new device G200eH3

- Added the new device ID
- Added new pll algorithm

Signed-off-by: Mathieu Larouche <mathieu.larouche@matrox.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: Change the return type of the unload hook to void

The integer returned by the unload hook is ignored by the drm core, so
let's make it void.

This patch was created using the following Coccinelle semantic script
(except for the declaration and comment in drm_drv.h):

Compile-tested only.

// <smpl>
@ get_name @
struct drm_driver drv;
identifier fn;
@@
drv.unload = fn;

@ replace_type @
identifier get_name.fn;
@@
- int
+ void
fn (...)
{
...
}

@ remove_return_param @
identifier get_name.fn;
@@
void fn (...)
{
<...
if (...)
return
- ...
;
...>
}

@ drop_final_return @
identifier get_name.fn;
@@
void fn (...)
{
...

- return 0;
}
// </smpl>

Suggested-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Acked-by: Christian König <christian.koenig@amd.com>.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170106175731.29196-1-krisman@collabora.co.uk

drm: Don't include <drm/drm_encoder.h> in <drm/drm_crtc.h>

<drm/drm_crtc.h> used to define most of the in-kernel KMS API. It has
now been split into separate files for each object type, but still
includes most other KMS headers to avoid breaking driver compilation.

As a step towards fixing that problem, remove the inclusion of
<drm/drm_encoder.h> from <drm/drm_crtc.h> and include it instead where
appropriate. Also remove the forward declarations of the drm_encoder and
drm_encoder_helper_funcs structures from <drm/drm_crtc.h> as they're not
needed in the header.

<drm/drm_encoder.h> now has to include <drm/drm_mode.h> and contain a
forward declaration of struct drm_encoder in order to allow including it
as the first header in a compilation unit.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sinclair Yeh <syeh@vmware.com> # For vmwgfx
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-2-git-send-email-laurent.pinchart+renesas@ideasonboard.com

drm/ttm: remove use_ticket parameter from ttm_bo_reserve

Not used any more.

Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm: Pass the user drm_mode_fb_cmd2 as const to .fb_create()

Drivers shouldn't clobber the passed in addfb ioctl parameters.
i915 was doing just that. To prevent it from happening again,
pass the struct around as const, starting all the way from
internal_framebuffer_create().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/mgag200: Add support for a new G200eW3 chipset

- Added support for the new deviceID for G200eW3
- Added PLL algorithm for the G200eW3
- Added some initialization code for G200eW3

Signed-off-by: Mathieu Larouche <mathieu.larouche@matrox.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: Extract <drm/drm_gem.h>

v2: Don't forget git add, noticed by David.

Cc: David Herrmann <dh.herrmann@gmail.com>

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Acked-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: Move legacy buffer structures to <drm/drm_legacy.h>

A few odd cases:
- mgag200 someho had a totally unused drm_dma_handle_t. Remove it.
- i915 still uses the legacy pci dma alloc api, so grows an include.

Everything else fairly standard.

v2: Include "drm_legacy.h" in drm.ko source files for consistency.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/ttm: move fpfn and lpfn into each placement v2

This allows us to more fine grained specify where to place the buffer object.

v2: rebased on drm-next, add bochs changes as well

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: Fix a few sparse warnings

The final parameter to ttm_bo_reserve() is a pointer, therefore callers
should use NULL instead of 0.

Fixes a bunch of sparse warnings of this type:

warning: Using plain integer as NULL pointer

Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: kill ->gem_init_object() and friends

All drivers embed gem-objects into their own buffer objects. There is no
reason to keep drm_gem_object_alloc(), gem->driver_private and
->gem_init_object() anymore.

New drivers are highly encouraged to do the same. There is no benefit in
allocating gem-objects separately.

Cc: Dave Airlie <airlied@gmail.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Ben Skeggs <skeggsb@gmail.com>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/gem: create drm_gem_dumb_destroy

All the gem based kms drivers really want the same function to
destroy a dumb framebuffer backing storage object.

So give it to them and roll it out in all drivers.

This still leaves the option open for kms drivers which don't use GEM
for backing storage, but it does decently simplify matters for gem
drivers.

Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Cc: Ben Skeggs <skeggsb@gmail.com>
Reviwed-by: Rob Clark <robdclark@gmail.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/mgag200: inline reservations

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/mgag200: Added resolution and bandwidth limits for various G200e products.

At the larger resolutions, the g200e series sometimes struggles with
maintaining a proper output. Problems like flickering or black bands appearing
on screen can occur. In order to avoid this, limitations regarding resolutions
and bandwidth have been added for the different variations of the g200e series.
This code was ported from the old xorg mga driver.

Signed-off-by: Julia Lemire <jlemire@matrox.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/mgag200: Hardware cursor support

G200 cards support, at best, 16 colour palleted images for the cursor
so we do a conversion in the cursor_set function, and reject cursors
with more than 16 colours, or cursors with partial transparency. Xorg
falls back gracefully to software cursors in this case.

We can't disable/enable the cursor hardware without causing momentary
corruption around the cursor. Instead, once the cursor is on we leave
it on, and simulate turning the cursor off by moving it
offscreen. This works well.

Since we can't disable -> update -> enable the cursors, we double
buffer cursor icons, then just move the base address that points to
the old cursor, to the new. This also works well, but uses an extra
page of memory.

The cursor buffers are lazily-allocated on first cursor_set. This is
to make sure they don't take priority over any framebuffers in case of
limited memory.

Here is a representation of how the bitmap for the cursor is mapped in G200 memory :

Each line of color cursor use 6 Slices of 8 bytes. Slices 0 to 3
are used for the 4bpp bitmap, slice 4 for XOR mask and slice 5 for
AND mask. Each line has the following format:

// Byte 0 Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7
//
// S0: P00-01 P02-03 P04-05 P06-07 P08-09 P10-11 P12-13 P14-15
// S1: P16-17 P18-19 P20-21 P22-23 P24-25 P26-27 P28-29 P30-31
// S2: P32-33 P34-35 P36-37 P38-39 P40-41 P42-43 P44-45 P46-47
// S3: P48-49 P50-51 P52-53 P54-55 P56-57 P58-59 P60-61 P62-63
// S4: X63-56 X55-48 X47-40 X39-32 X31-24 X23-16 X15-08 X07-00
// S5: A63-56 A55-48 A47-40 A39-32 A31-24 A23-16 A15-08 A07-00
//
// S0 to S5 = Slices 0 to 5
// P00 to P63 = Bitmap - pixels 0 to 63
// X00 to X63 = always 0 - pixels 0 to 63
// A00 to A63 = transparent markers - pixels 0 to 63
// 1 means colour, 0 means transparent

Signed-off-by: Christopher Harvey <charvey@matrox.com>
Signed-off-by: Mathieu Larouche <mathieu.larouche@matrox.com>
Acked-by: Julia Lemire <jlemire@matrox.com>
Tested-by: Julia Lemire <jlemire@matrox.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>

drm/mgag200: deal with bo reserve fail in dirty update path

On F19 testing, it was noticed we get a lot of errors in dmesg
about being unable to reserve the buffer when plymouth starts,
this is due to the buffer being in the process of migrating,
so it makes sense we can't reserve it.

In order to deal with it, this adds delayed updates for the dirty
updates, when the bo is unreservable, in the normal console case
this shouldn't ever happen, its just when plymouth or X is
pushing the console bo to system memory.

Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: Misc comment cleanup

Signed-off-by: Christopher Harvey <charvey@matrox.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/mgag200: 'fbdev_list' in 'struct mga_fbdev' is not used

Signed-off-by: Christopher Harvey <charvey@matrox.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

UAPI: (Scripted) Convert #include "..." to #include <path/...> in drivers/gpu/

Convert #include "..." to #include <path/...> in drivers/gpu/.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>

drm/mgag200: remove unused validate_sequence

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

mgag200: initial g200se driver (v2)

This is a driver for the G200 server engines chips,
it doesn't driver any of the Matrix G series desktop cards.

It will bind to G200 SE A,B, G200EV, G200WB, G200EH and G200ER cards.

Its based on previous work done my Matthew Garrett but remodelled
to follow the same style and flow as the AST server driver. It also
works along the same lines as the AST server driver wrt memory management.

There is no userspace driver planned, xf86-video-modesetting should be used.
It also appears these GPUs have no ARGB hw cursors.

v2: add missing tagfifo reset + G200 SE memory bw setup pieces.

Signed-off-by: Dave Airlie <airlied@redhat.com>