drm/mgag200: Provide per-device callbacks for PIXPLLC

Move the PIXPLLC code into per-model source files and wire it up
with per-model callbacks. No functional changes.

The PIXPLLC pixel-clock is part of the CRTC, but really separate
hardware that varies with each model of the G200. Move the PIXPLLC
code for each model into the per-model source file and call it from
CRTC helpers via device functions.

This allows to remove struct mgag200_pll and the related code. The
new callbacks behave like the CRTC's atomic_check and atomic_enable
functions.

v3:
* clean up style

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-12-tzimmermann@suse.de

drm/mgag200: Provide per-device callbacks for BMC synchronization

Move the BMC-related code into its own file and wire it up with device
callbacks.

While programming a new display mode, G200EW3 and G200WB have to de-
synchronize with the BMC. Synchronization is done via VIDRST pins
and controlled via VRSTEN and HRSTEN bits. Move the BMC code behind
a serviceable interface and call it from the CRTC's enable and
disable functions.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-11-tzimmermann@suse.de

drm/mgag200: Implement new init logic

Rework mgag200_regs_init() and mgag200_mm_init() into device preinit
and init functions. The preinit function, mgag200_device_preinit(),
requests and maps a device's I/O and video memory. The init function,
mgag200_device_init() initializes the state of struct mga_device.
Splitting the initialization between the two functions is necessary
to perform per-model operations between the two calls, such as reading
the unique revision ID on G200SEs.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-6-tzimmermann@suse.de

drm/mgag200: Initialize each model in separate function

Add a separate initializer function for each model. Add separate
devic structures for G200 and G200SE, which require additional
information.

Also move G200's and G200SE's helpers for reading the BIOS and
version id into model-specific code.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-3-tzimmermann@suse.de

drm/mgag200: Abstract pixel PLL via struct mgag200_pll

Move all PLL compute and update functions into mgag200_pll.c. No
functional changes to the rsp algorithms.

Introduce struct mgag200_pll and mgag200_pll_funcs. The data strutures
abstract the details of each revision's PLL. Perform calls to compute
and update functionality via function pointers. Init the PLL once as
part of the driver initialization.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-11-tzimmermann@suse.de

drm/mgag200: Move device init and cleanup to mgag200_drv.c

Moving the initializer and cleanup functions for device instances
to mgag200_drv.c prepares for the conversion to managed code. No
functional changes are made. Remove mgag200_main.c, which is now
empty.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-11-tzimmermann@suse.de

drm/mgag200: Rename mgag200_ttm.c to mgag200_mm.c

The mgag200 driver does not use TTM any longer. Rename the related file
to mgag200_mm.c (as in 'memory management').

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-5-tzimmermann@suse.de

drm/mgag200: Remove HW cursor

The HW cursor of Matrox G200 cards only supports a 16-color palette
format. Univeral planes require at least ARGB or a similar component-
based format, so remove the HW cursor.

Alternatively, the driver could dither a cursor image from ARGB to
16 colors. But this does not produce pleasent-looking results in
general, so it's useless for modern compositors.

Without HW support, compositors will use software rendering.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-2-tzimmermann@suse.de

drm/mgag200: Replace struct mga_fbdev with generic framebuffer emulation

This patch replaces mgag200's framebuffer console with DRM's generic
implememtation. All respective code is being removed from the driver.

The console is set up with a shadow buffer. The actual buffer object is
not permanently pinned in video ram, but just another buffer object that
the driver moves in and out of vram as necessary. The driver's function
mga_crtc_do_set_base() used to contain special handling for the framebuffer
console. With the new generic framebuffer, the driver does not need this
code an longer.

For consistency, this patch also changes the preferred framebuffer depth.
The original code used 24 bpp by default and 32 bpp for the framebuffer. As
24 bpp is not well supported by userspace anyway, setting 32 bpp as default
makes sense.

v2:
* rely on fbdev helpers error messages
* document changes to preferred depth
* dirty function no longer required

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/315832/

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/mgag200: fix include notation and remove -Iinclude/drm flag

Include <drm/*.h> instead of relative path from include/drm, then
remove the -Iinclude/drm compiler flag.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1493009447-31524-10-git-send-email-yamada.masahiro@socionext.com

drm/mgag200: Hardware cursor support

G200 cards support, at best, 16 colour palleted images for the cursor
so we do a conversion in the cursor_set function, and reject cursors
with more than 16 colours, or cursors with partial transparency. Xorg
falls back gracefully to software cursors in this case.

We can't disable/enable the cursor hardware without causing momentary
corruption around the cursor. Instead, once the cursor is on we leave
it on, and simulate turning the cursor off by moving it
offscreen. This works well.

Since we can't disable -> update -> enable the cursors, we double
buffer cursor icons, then just move the base address that points to
the old cursor, to the new. This also works well, but uses an extra
page of memory.

The cursor buffers are lazily-allocated on first cursor_set. This is
to make sure they don't take priority over any framebuffers in case of
limited memory.

Here is a representation of how the bitmap for the cursor is mapped in G200 memory :

Each line of color cursor use 6 Slices of 8 bytes. Slices 0 to 3
are used for the 4bpp bitmap, slice 4 for XOR mask and slice 5 for
AND mask. Each line has the following format:

// Byte 0 Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7
//
// S0: P00-01 P02-03 P04-05 P06-07 P08-09 P10-11 P12-13 P14-15
// S1: P16-17 P18-19 P20-21 P22-23 P24-25 P26-27 P28-29 P30-31
// S2: P32-33 P34-35 P36-37 P38-39 P40-41 P42-43 P44-45 P46-47
// S3: P48-49 P50-51 P52-53 P54-55 P56-57 P58-59 P60-61 P62-63
// S4: X63-56 X55-48 X47-40 X39-32 X31-24 X23-16 X15-08 X07-00
// S5: A63-56 A55-48 A47-40 A39-32 A31-24 A23-16 A15-08 A07-00
//
// S0 to S5 = Slices 0 to 5
// P00 to P63 = Bitmap - pixels 0 to 63
// X00 to X63 = always 0 - pixels 0 to 63
// A00 to A63 = transparent markers - pixels 0 to 63
// 1 means colour, 0 means transparent

Signed-off-by: Christopher Harvey <charvey@matrox.com>
Signed-off-by: Mathieu Larouche <mathieu.larouche@matrox.com>
Acked-by: Julia Lemire <jlemire@matrox.com>
Tested-by: Julia Lemire <jlemire@matrox.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>

mgag200: initial g200se driver (v2)

This is a driver for the G200 server engines chips,
it doesn't driver any of the Matrix G series desktop cards.

It will bind to G200 SE A,B, G200EV, G200WB, G200EH and G200ER cards.

Its based on previous work done my Matthew Garrett but remodelled
to follow the same style and flow as the AST server driver. It also
works along the same lines as the AST server driver wrt memory management.

There is no userspace driver planned, xf86-video-modesetting should be used.
It also appears these GPUs have no ARGB hw cursors.

v2: add missing tagfifo reset + G200 SE memory bw setup pieces.

Signed-off-by: Dave Airlie <airlied@redhat.com>