drm/mediatek: Fix iommu fault by swapping FBs after updating plane state

According to the comment in drm_atomic_helper_async_commit(),
we should make sure FBs have been swapped, so that cleanups in the
new_state performs a cleanup in the old FB.

So we should move swapping FBs after calling mtk_plane_update_new_state(),
to avoid using the old FB which could be freed.

Fixes: 1a64a7aff8da ("drm/mediatek: Fix cursor plane no update")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20230809125722.24112-2-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Fix coverity issue with unintentional integer overflow

1. Instead of multiplying 2 variable of different types. Change to
assign a value of one variable and then multiply the other variable.

2. Add a int variable for multiplier calculation instead of calculating
different types multiplier with dma_addr_t variable directly.

Fixes: 1a64a7aff8da ("drm/mediatek: Fix cursor plane no update")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230907091425.9526-1-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Fix dereference before null check

Null-checking state suggests that it may be null, but it has already
been dereferenced on drm_atomic_get_new_plane_state(state, plane).

The parameter state will never be NULL currently, so just remove the
state is NULL flow in this function.

Fixes: 5ddb0bd4ddc3 ("drm/atomic: Pass the full state to planes async atomic check and update")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230714094908.13087-5-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Refactor pixel format logic

Add an DDP component interface for querying pixel format support
and move list of supported pixel formats into DDP components
instead of mtk_drm_plane.c

Tested by running Chrome on an MT8195.

Signed-off-by: Justin Green <greenjustin@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20230309210416.1167020-2-greenjustin@chromium.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Add AFBC support to Mediatek DRM driver

Tested on MT8195 and confirmed both correct video output and improved DRAM
bandwidth performance.

Signed-off-by: Justin Green <greenjustin@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20221116193335.36320-1-greenjustin@google.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/atomic-helper: Remove _HELPER_ infix from DRM_PLANE_HELPER_NO_SCALING

Rename DRM_PLANE_HELPER_NO_SCALING to DRM_PLANE_NO_SCALING. The constant
is not really a helper, but rather a characteristic of the plane itself.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-4-tzimmermann@suse.de

drm/atomic-helper: Move DRM_PLANE_HELPER_NO_SCALING to atomic helpers

The macro DRM_PLANE_HELPER_NO_SCALING is only useful with the interfaces
in drm_atomic_helper.h, but defined in drm_plane_helper.h. So half of
DRM includes the latter header file for using this macro. Move the macro
and remove the include statements.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-3-tzimmermann@suse.de

drm/mediatek: Add mediatek-drm plane color encoding info

Add plane color encoding information for color space conversion.
It's a preparation for adding support for mt8195 ovl_adaptor mdp_rdma
csc control.

Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220620091930.27797-10-nancy.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm: Drop drm_blend.h from drm_crtc.h

drm_crtc.h has no need for drm_blend.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_blend.h.

Quite a few placs do currently depend on drm_blend.h without
actually including it directly. All of those need to be fixed
up.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613200317.11305-4-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>

drm: Drop drm_framebuffer.h from drm_crtc.h

drm_crtc.h has no need for drm_frambuffer.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_framebuffer.h.

Quite a few placs do currently depend on drm_framebuffer.h without
actually including it directly. All of those need to be fixed
up.

v2: Fix up msm some more
v2: Deal with ingenic and shmobile as well

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614095449.29311-1-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>

drm/mediatek: mtk_drm_plane: Use kmalloc in mtk_plane_duplicate_state

There is no need to zero out the newly allocated memory because we are
duplicating all members of struct mtk_plane_state: switch to kmalloc
to save some overhead.

Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220118133759.112458-1-angelogioacchino.delregno@collabora.com/
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Set the default value of rotation to DRM_MODE_ROTATE_0

At the reset hook, call __drm_atomic_helper_plane_reset which is
called at the initialization of the plane and sets the default value of
rotation on all planes to DRM_MODE_ROTATE_0 which is equal to 1.

Tested on Jacuzzi (MTK).
Resolves IGT@kms_properties@plane-properties-{legacy,atomic}

Signed-off-by: Mark Yacoub <markyacoub@chromium.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/<driver>: drm_gem_plane_helper_prepare_fb is now the default

No need to set it explicitly.

Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Philippe Cornu <philippe.cornu@foss.st.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Yannick Fertre <yannick.fertre@foss.st.com>
Cc: Philippe Cornu <philippe.cornu@foss.st.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Jyri Sarha <jyri.sarha@iki.fi>
Cc: Tomi Valkeinen <tomba@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-sunxi@lists.linux.dev
Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-9-daniel.vetter@ffwll.ch

drm/mediatek: Fix cursor plane no update

The cursor plane should use the current plane state in atomic_async_update
because it would not be the new plane state in the global atomic state
since _swap_state happened when those hook are run.

Fix cursor plane issue by below modification:
1. Remove plane_helper_funcs->atomic_update(plane, state) in
mtk_drm_crtc_async_update.
2. Add mtk_drm_update_new_state in to mtk_plane_atomic_async_update to
update the cursor plane by current plane state hook and update
others plane by the new_state.

Fixes: 37418bf14c13 ("drm: Use state helper instead of the plane state pointer")
Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm: Use state helper instead of the plane state pointer

Many drivers reference the plane->state pointer in order to get the
current plane state in their atomic_update or atomic_disable hooks,
which would be the new plane state in the global atomic state since
_swap_state happened when those hooks are run.

Use the drm_atomic_get_new_plane_state helper to get that state to make it
more obvious.

This was made using the coccinelle script below:

@ plane_atomic_func @
identifier helpers;
identifier func;
@@

(
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_disable = func,
...,
};
|
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_update = func,
...,
};
)

@ adds_new_state @
identifier plane_atomic_func.func;
identifier plane, state;
identifier new_state;
@@

func(struct drm_plane *plane, struct drm_atomic_state *state)
{
...
- struct drm_plane_state *new_state = plane->state;
+ struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane);
...
}

@ include depends on adds_new_state @
@@

#include <drm/drm_atomic.h>

@ no_include depends on !include && adds_new_state @
@@

+ #include <drm/drm_atomic.h>
#include <drm/...>

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20210219120032.260676-1-maxime@cerno.tech

drm/atomic: Pass the full state to planes atomic disable and update

The current atomic helpers have either their object state being passed as
an argument or the full atomic state.

The former is the pattern that was done at first, before switching to the
latter for new hooks or when it was needed.

Let's convert the remaining helpers to provide a consistent interface,
this time with the planes atomic_update and atomic_disable.

The conversion was done using the coccinelle script below, built tested on
all the drivers.

@@
identifier plane, plane_state;
symbol state;
@@

struct drm_plane_helper_funcs {
...
void (*atomic_update)(struct drm_plane *plane,
- struct drm_plane_state *plane_state);
+ struct drm_atomic_state *state);
...
}

@@
identifier plane, plane_state;
symbol state;
@@

struct drm_plane_helper_funcs {
...
void (*atomic_disable)(struct drm_plane *plane,
- struct drm_plane_state *plane_state);
+ struct drm_atomic_state *state);
...
}

@ plane_atomic_func @
identifier helpers;
identifier func;
@@

(
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_update = func,
...,
};
|
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_disable = func,
...,
};
)

@@
struct drm_plane_helper_funcs *FUNCS;
identifier f;
identifier crtc_state;
identifier plane, plane_state, state;
expression e;
@@

f(struct drm_crtc_state *crtc_state)
{
...
struct drm_atomic_state *state = e;
<+...
(
- FUNCS->atomic_disable(plane, plane_state)
+ FUNCS->atomic_disable(plane, state)
|
- FUNCS->atomic_update(plane, plane_state)
+ FUNCS->atomic_update(plane, state)
)
...+>
}

@@
identifier plane_atomic_func.func;
identifier plane;
symbol state;
@@

func(struct drm_plane *plane,
- struct drm_plane_state *state)
+ struct drm_plane_state *old_plane_state)
{
<...
- state
+ old_plane_state
...>
}

@ ignores_old_state @
identifier plane_atomic_func.func;
identifier plane, old_state;
@@

func(struct drm_plane *plane, struct drm_plane_state *old_state)
{
... when != old_state
}

@ adds_old_state depends on plane_atomic_func && !ignores_old_state @
identifier plane_atomic_func.func;
identifier plane, plane_state;
@@

func(struct drm_plane *plane, struct drm_plane_state *plane_state)
{
+ struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane);
...
}

@ depends on plane_atomic_func @
identifier plane_atomic_func.func;
identifier plane, plane_state;
@@

func(struct drm_plane *plane,
- struct drm_plane_state *plane_state
+ struct drm_atomic_state *state
)
{ ... }

@ include depends on adds_old_state @
@@

#include <drm/drm_atomic.h>

@ no_include depends on !include && adds_old_state @
@@

+ #include <drm/drm_atomic.h>
#include <drm/...>

@@
identifier plane_atomic_func.func;
identifier plane, state;
identifier plane_state;
@@

func(struct drm_plane *plane, struct drm_atomic_state *state) {
...
struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane);
<+...
- plane_state->state
+ state
...+>
}

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-9-maxime@cerno.tech

drm: Rename plane->state variables in atomic update and disable

Some drivers are storing the plane->state pointer in atomic_update and
atomic_disable in a variable simply called state, while the state passed
as an argument is called old_state.

In order to ease subsequent reworks and to avoid confusing or
inconsistent names, let's rename those variables to new_state.

This was done using the following coccinelle script, plus some manual
changes for mtk and tegra.

@ plane_atomic_func @
identifier helpers;
identifier func;
@@

(
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_disable = func,
...,
};
|
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_update = func,
...,
};
)

@ moves_new_state_old_state @
identifier plane_atomic_func.func;
identifier plane;
symbol old_state;
symbol state;
@@

func(struct drm_plane *plane, struct drm_plane_state *old_state)
{
...
- struct drm_plane_state *state = plane->state;
+ struct drm_plane_state *new_state = plane->state;
...
}

@ depends on moves_new_state_old_state @
identifier plane_atomic_func.func;
identifier plane;
identifier old_state;
symbol state;
@@

func(struct drm_plane *plane, struct drm_plane_state *old_state)
{
<...
- state
+ new_state
...>
}

@ moves_new_state_oldstate @
identifier plane_atomic_func.func;
identifier plane;
symbol oldstate;
symbol state;
@@

func(struct drm_plane *plane, struct drm_plane_state *oldstate)
{
...
- struct drm_plane_state *state = plane->state;
+ struct drm_plane_state *newstate = plane->state;
...
}

@ depends on moves_new_state_oldstate @
identifier plane_atomic_func.func;
identifier plane;
identifier old_state;
symbol state;
@@

func(struct drm_plane *plane, struct drm_plane_state *old_state)
{
<...
- state
+ newstate
...>
}

@ moves_new_state_old_pstate @
identifier plane_atomic_func.func;
identifier plane;
symbol old_pstate;
symbol state;
@@

func(struct drm_plane *plane, struct drm_plane_state *old_pstate)
{
...
- struct drm_plane_state *state = plane->state;
+ struct drm_plane_state *new_pstate = plane->state;
...
}

@ depends on moves_new_state_old_pstate @
identifier plane_atomic_func.func;
identifier plane;
identifier old_pstate;
symbol state;
@@

func(struct drm_plane *plane, struct drm_plane_state *old_pstate)
{
<...
- state
+ new_pstate
...>
}

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-8-maxime@cerno.tech

drm: Store new plane state in a variable for atomic_update and disable

In order to store the new plane state in a subsequent helper, let's move
the plane->state dereferences into a variable.

This was done using the following coccinelle script, plus some hand
changes for vmwgfx:

@ plane_atomic_func @
identifier helpers;
identifier func;
@@

(
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_disable = func,
...,
};
|
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_update = func,
...,
};
)

@ has_new_state_old_state @
identifier plane_atomic_func.func;
identifier plane;
identifier new_state;
symbol old_state;
@@

func(struct drm_plane *plane, struct drm_plane_state *old_state)
{
...
struct drm_plane_state *new_state = plane->state;
...
}

@ depends on !has_new_state_old_state @
identifier plane_atomic_func.func;
identifier plane;
symbol old_state;
@@

func(struct drm_plane *plane, struct drm_plane_state *old_state)
{
+ struct drm_plane_state *new_state = plane->state;
<+...
- plane->state
+ new_state
...+>
}

@ has_new_state_state @
identifier plane_atomic_func.func;
identifier plane;
identifier new_state;
symbol state;
@@

func(struct drm_plane *plane, struct drm_plane_state *state)
{
...
struct drm_plane_state *new_state = plane->state;
...
}

@ depends on !has_new_state_state @
identifier plane_atomic_func.func;
identifier plane;
symbol state;
@@

func(struct drm_plane *plane, struct drm_plane_state *state)
{
+ struct drm_plane_state *new_plane_state = plane->state;
<+...
- plane->state
+ new_plane_state
...+>
}

@ has_new_state_old_s @
identifier plane_atomic_func.func;
identifier plane;
identifier new_state;
symbol old_s;
@@

func(struct drm_plane *plane, struct drm_plane_state *old_s)
{
...
struct drm_plane_state *new_state = plane->state;
...
}

@ depends on !has_new_state_old_s @
identifier plane_atomic_func.func;
identifier plane;
symbol old_s;
@@

func(struct drm_plane *plane, struct drm_plane_state *old_s)
{
+ struct drm_plane_state *new_s = plane->state;
<+...
- plane->state
+ new_s
...+>
}

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20210219120032.260676-1-maxime@cerno.tech

drm: Use the state pointer directly in planes atomic_check

Now that atomic_check takes the global atomic state as a parameter, we
don't need to go through the pointer in the plane state.

This was done using the following coccinelle script:

@ plane_atomic_func @
identifier helpers;
identifier func;
@@

static struct drm_plane_helper_funcs helpers = {
...,
.atomic_check = func,
...,
};

@@
identifier plane_atomic_func.func;
identifier plane, state;
identifier plane_state;
@@

func(struct drm_plane *plane, struct drm_atomic_state *state) {
...
- struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane);
<... when != plane_state
- plane_state->state
+ state
...>
}

@@
identifier plane_atomic_func.func;
identifier plane, state;
identifier plane_state;
@@

func(struct drm_plane *plane, struct drm_atomic_state *state) {
...
struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane);
<...
- plane_state->state
+ state
...>
}

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-5-maxime@cerno.tech

drm/atomic: Pass the full state to planes atomic_check

The current atomic helpers have either their object state being passed as
an argument or the full atomic state.

The former is the pattern that was done at first, before switching to the
latter for new hooks or when it was needed.

Let's convert all the remaining helpers to provide a consistent
interface, starting with the planes atomic_check.

The conversion was done using the coccinelle script below plus some
manual changes for vmwgfx, built tested on all the drivers.

@@
identifier plane, plane_state;
symbol state;
@@

struct drm_plane_helper_funcs {
...
int (*atomic_check)(struct drm_plane *plane,
- struct drm_plane_state *plane_state);
+ struct drm_atomic_state *state);
...
}

@ plane_atomic_func @
identifier helpers;
identifier func;
@@

static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_check = func,
...,
};

@@
struct drm_plane_helper_funcs *FUNCS;
identifier f;
identifier dev;
identifier plane, plane_state, state;
@@

f(struct drm_device *dev, struct drm_atomic_state *state)
{
<+...
- FUNCS->atomic_check(plane, plane_state)
+ FUNCS->atomic_check(plane, state)
...+>
}

@ ignores_new_state @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@

func(struct drm_plane *plane, struct drm_plane_state *new_plane_state)
{
... when != new_plane_state
}

@ adds_new_state depends on plane_atomic_func && !ignores_new_state @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@

func(struct drm_plane *plane, struct drm_plane_state *new_plane_state)
{
+ struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane);
...
}

@ depends on plane_atomic_func @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@

func(struct drm_plane *plane,
- struct drm_plane_state *new_plane_state
+ struct drm_atomic_state *state
)
{ ... }

@ include depends on adds_new_state @
@@

#include <drm/drm_atomic.h>

@ no_include depends on !include && adds_new_state @
@@

+ #include <drm/drm_atomic.h>
#include <drm/...>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-4-maxime@cerno.tech

drm: Rename plane atomic_check state names

Most drivers call the argument to the plane atomic_check hook simply
state, which is going to conflict with the global atomic state in a
later rework. Let's rename it to new_plane_state (or new_state depending
on the convention used in the driver).

This was done using the coccinelle script below, and built tested:

@ plane_atomic_func @
identifier helpers;
identifier func;
@@

static const struct drm_plane_helper_funcs helpers = {
.atomic_check = func,
};

@ has_old_state @
identifier plane_atomic_func.func;
identifier plane;
expression e;
symbol old_state;
symbol state;
@@

func(struct drm_plane *plane, struct drm_plane_state *state)
{
...
struct drm_plane_state *old_state = e;
...
}

@ depends on has_old_state @
identifier plane_atomic_func.func;
identifier plane;
symbol old_state;
@@

func(struct drm_plane *plane,
- struct drm_plane_state *state
+ struct drm_plane_state *new_state
)
{
<+...
- state
+ new_state
...+>
}

@ has_state @
identifier plane_atomic_func.func;
identifier plane;
symbol state;
@@

func(struct drm_plane *plane, struct drm_plane_state *state)
{
...
}

@ depends on has_state @
identifier plane_atomic_func.func;
identifier plane;
symbol old_state;
@@

func(struct drm_plane *plane,
- struct drm_plane_state *state
+ struct drm_plane_state *new_plane_state
)
{
<+...
- state
+ new_plane_state
...+>
}

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-2-maxime@cerno.tech

drm/atomic: Pass the full state to planes async atomic check and update

The current atomic helpers have either their object state being passed as
an argument or the full atomic state.

The former is the pattern that was done at first, before switching to the
latter for new hooks or when it was needed.

Let's start convert all the remaining helpers to provide a consistent
interface, starting with the planes atomic_async_check and
atomic_async_update.

The conversion was done using the coccinelle script below, built tested on
all the drivers.

@@
identifier plane, plane_state;
symbol state;
@@

struct drm_plane_helper_funcs {
...
int (*atomic_async_check)(struct drm_plane *plane,
- struct drm_plane_state *plane_state);
+ struct drm_atomic_state *state);
...
}

@@
identifier plane, plane_state;
symbol state;
@@
struct drm_plane_helper_funcs {
...
void (*atomic_async_update)(struct drm_plane *plane,
- struct drm_plane_state *plane_state);
+ struct drm_atomic_state *state);
...
}

@ plane_atomic_func @
identifier helpers;
identifier func;
@@

(
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_async_check = func,
...,
};
|
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_async_update = func,
...,
};
)

@@
struct drm_plane_helper_funcs *FUNCS;
identifier f;
identifier dev;
identifier plane, plane_state, state;
@@

f(struct drm_device *dev, struct drm_atomic_state *state)
{
<+...
- FUNCS->atomic_async_check(plane, plane_state)
+ FUNCS->atomic_async_check(plane, state)
...+>
}

@@
struct drm_plane_helper_funcs *FUNCS;
identifier f;
identifier dev;
identifier plane, plane_state, state;
@@

f(struct drm_device *dev, struct drm_atomic_state *state)
{
<+...
- FUNCS->atomic_async_update(plane, plane_state)
+ FUNCS->atomic_async_update(plane, state)
...+>
}

@@
identifier mtk_plane_atomic_async_update;
identifier plane;
symbol new_state, state;
expression e;
@@

void mtk_plane_atomic_async_update(struct drm_plane *plane, struct drm_plane_state *new_state)
{
...
- struct mtk_plane_state *state = e;
+ struct mtk_plane_state *new_plane_state = e;
<+...
- state
+ new_plane_state
...+>
}

@@
identifier plane_atomic_func.func;
identifier plane;
symbol state;
@@

func(struct drm_plane *plane,
- struct drm_plane_state *state)
+ struct drm_plane_state *new_plane_state)
{
<...
- state
+ new_plane_state
...>
}

@ ignores_new_state @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@

func(struct drm_plane *plane, struct drm_plane_state *new_plane_state)
{
... when != new_plane_state
}

@ adds_new_state depends on plane_atomic_func && !ignores_new_state @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@

func(struct drm_plane *plane, struct drm_plane_state *new_plane_state)
{
+ struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane);
...
}

@ depends on plane_atomic_func @
identifier plane_atomic_func.func;
identifier plane, plane_state;
@@

func(struct drm_plane *plane,
- struct drm_plane_state *plane_state
+ struct drm_atomic_state *state
)
{ ... }

@ include depends on adds_new_state @
@@

#include <drm/drm_atomic.h>

@ no_include depends on !include && adds_new_state @
@@

+ #include <drm/drm_atomic.h>
#include <drm/...>

@@
identifier plane_atomic_func.func;
identifier plane, state;
identifier plane_state;
@@

func(struct drm_plane *plane, struct drm_atomic_state *state) {
...
struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane);
<+...
- plane_state->state
+ state
...+>
}

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-1-maxime@cerno.tech

drm/gem: Move drm_gem_fb_prepare_fb() to GEM atomic helpers

The function drm_gem_fb_prepare_fb() is a helper for atomic modesetting,
but currently located next to framebuffer helpers. Move it to GEM atomic
helpers, rename it slightly and adopt the drivers. Same for the rsp
simple-pipe helper.

Compile-tested with x86-64, aarch64 and arm. The patch is fairly large,
but there are no functional changes.

v3:
* remove out-comented line in drm_gem_framebuffer_helper.h
(Maxime)
v2:
* rename to drm_gem_plane_helper_prepare_fb() (Daniel)
* add tutorial-style documentation

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210222141756.7864-1-tzimmermann@suse.de

drm/mediatek: Check plane visibility in atomic_update

Disable the plane if it's not visible. Otherwise mtk_ovl_layer_config()
would proceed with invalid plane and we may see vblank timeout.

Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Add fb swap in async_update

Besides x, y position, width and height,
fb also need updating in async update.

Fixes: 920fffcc8912 ("drm/mediatek: update cursors by using async atomic update")

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm/mediatek: Add plane check in async_check function

MTK do rotation checking and transferring in layer check function,
but we do not check that in atomic_check,
so add back in atomic_check function.

Fixes: 920fffcc8912 ("drm/mediatek: update cursors by using async atomic update")

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm/mediatek: update cursors by using async atomic update

Support to async updates of cursors by using the new atomic
interface for that.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm/mediatek: plane_state->fb iff plane_state->crtc

Checking both is one too much, so wrap a WARN_ON around it to stope
the copypasta.

Acked-by: CK Hu <ck.hu@mediatek.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20191213172612.1514842-5-daniel.vetter@ffwll.ch

drm/mediatek: don't open-code drm_gem_fb_create

Aside: There's a few other fb_create implementations which
simply check for valid buffer format (or an approximation thereof),
and then call drm_gem_fb_create. For atomic drivers at least we could
walk all planes and make sure the format/modifier combo is valid,
and remove even more code.

For non-atomic drivers that's not possible, since the format list for
the primary buffer might be garbage (and most likely it is).

Also delete mtk_drm_fb.[hc] since it would now only contain one
function.

Acked-by: CK Hu <ck.hu@mediatek.com>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191115092120.4445-4-daniel.vetter@ffwll.ch

drm/mediatek: Plumb supported rotation values from components to plane init

This patch adds the ability for components to expose supported rotations
which will be exposed to userspace via a plane rotation property.

No functional changes in this patch.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm/mediatek: Add plumbing for layer_check hook

This allows components to implement a .layer_check callback for their
layers which is called during atomic_check.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm/mediatek: Add RGB[A] variants to published plane formats

These formats are handled in the rdma code, but for some reason they're
not published as supported formats for the planes. So add them to the
list.

Cc: Nicolas Boichat <drinkcat@chromium.org>
Cc: Daniele Castagna <dcastagna@chromium.org>
Cc: Miguel Casas <mcasas@chromium.org>
Tested-by: Miguel Casas <mcasas@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm/mediatek: drop use of drmP.h

Drop use of the deprecated drmP.h header file.

While touching the include files divide them up in blocks
in the typical order:

\#include <linux/*>

\#include <video/*>

\#include <drm/*>

\#include ""

And sort the includes in the blocks
Add the necessary includes to fix build after removal of drmP.h

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-20-sam@ravnborg.org

drm/mediatek: Use drm_atomic_helper_wait_for_fences

If we use the gem fb helper as the prepare_fb hook, plus the
drm_prime.c import helpers now automatically setting obj->resv, we can
use the shared helpers to wait for fences instead of rolling our own.
Note that this relies on mtk setting drm_fb->obj, which is already
done in mtk_drm_framebuffer_init().

Aside: Probably can use the default commit_tail with this again, but I
didn't check for that.

Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190614203615.12639-45-daniel.vetter@ffwll.ch

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 655 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/mtk: Move GEM BO to drm_framebuffer

Since drm_framebuffer can now store GEM objects directly, place them
there rather than in our own subclass. As this makes the framebuffer
create_handle and destroy functions the same as the GEM framebuffer
helper, we can reuse those.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>

drm/mtk: Remove impossible internal error

We cannot create a framebuffer with no objects, so there's no point
testing for it.

v2: Remove the error entirely. (Sean, CK, Thierry)

Signed-off-by: Daniel Stone <daniels@collabora.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm/mtk: Move GEM BO to drm_framebuffer

Since drm_framebuffer can now store GEM objects directly, place them
there rather than in our own subclass. As this makes the framebuffer
create_handle and destroy functions the same as the GEM framebuffer
helper, we can reuse those.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180518134705.12533-2-daniels@collabora.com

drm/mtk: Remove impossible internal error

We cannot create a framebuffer with no objects, so there's no point
testing for it.

v2: Remove the error entirely. (Sean, CK, Thierry)

Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180518134705.12533-1-daniels@collabora.com

drm: Don't pass clip to drm_atomic_helper_check_plane_state()

Move the plane clip rectangle handling into
drm_atomic_helper_check_plane_state(). Drivers no longer
have to worry about such mundane details.

v2: Convert armada, rcar, and sun4i as well
v3: Resolve simple_kms_helper conflict

Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org> #msm
Link: https://patchwork.freedesktop.org/patch/msgid/20180123170857.13818-5-ville.syrjala@linux.intel.com
Acked-by: Liviu Dudau <liviu.dudau@arm.com> #hdlcd,malidp
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> #imx,mtk
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com> #vmwgfx
Acked-by: Neil Armstrong <narmstrong@baylibre.com> #meson
Acked-by: Shawn Guo <shawnguo@kernel.org> #zte

drm/mediatek: Use drm_mode_get_hv_timing() to populate plane clip rectangle

Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.

No functional changes as the code already uses crtc_state->mode
to populate the clip, which is also what drm_mode_get_hv_timing()
uses.

Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123190502.28449-8-ville.syrjala@linux.intel.com
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Thierry Reding <treding@nvidia.com>

drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c

drm_plane_helper_check_update() isn't a transitional helper, so let's
rename it to drm_atomic_helper_check_plane_state() and move it into
drm_atomic_helper.c.

v2: Fix the WARNs about plane_state->crtc matching crtc_state->crtc

Cc: Daniel Vetter <daniel@ffwll.ch>
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101201619.6175-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: Check crtc_state->enable rather than crtc->enabled in drm_plane_helper_check_state()

drm_plane_helper_check_state() is supposed to do things the atomic way,
so it should not be inspecting crtc->enabled. Rather we should be
looking at crtc_state->enable.

We have a slight complication due to drm_plane_helper_check_update()
reusing drm_plane_helper_check_state() for non-atomic drivers. Thus
we'll have to pass the crtc_state in manally and construct a fake
crtc_state in drm_plane_helper_check_update().

v2: Fix the WARNs about plane_state->crtc matching crtc_state->crtc

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101201558.6059-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: Plumb modifiers through plane init

This is the plumbing for supporting fb modifiers on planes. Modifiers
have already been introduced to some extent, but this series will extend
this to allow querying modifiers per plane. Based on this, the client to
enable optimal modifications for framebuffers.

This patch simply allows the DRM drivers to initialize their list of
supported modifiers upon initializing the plane.

v2: A minor addition from Daniel

v3:
* Updated commit message
* s/INVALID/DRM_FORMAT_MOD_INVALID (Liviu)
* Remove some excess newlines (Liviu)
* Update comment for > 64 modifiers (Liviu)

v4: Minor comment adjustments (Liviu)

v5: Some new platforms added due to rebase

v6: Add some missed plane inits (or maybe they're new - who knows at
this point) (Daniel)

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Daniel Stone <daniels@collabora.com> (v2)
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>

drm/mediatek: Support UYVY and YUYV format for overlay

MT8173 overlay can support UYVY and YUYV format,
we add the format in DRM driver.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm: Nuke fb->pixel_format

Replace uses of fb->pixel_format with fb->format->format.
Less duplicated information is a good thing.

Note that coccinelle failed to eliminate the
"/* fourcc format */" comment from drm_framebuffer.h, so I had
to do that part manually.

@@
struct drm_framebuffer *FB;
expression E;
@@
drm_helper_mode_fill_fb_struct(...) {
...
- FB->pixel_format = E;
...
}

@@
struct drm_framebuffer *FB;
expression E;
@@
i9xx_get_initial_plane_config(...) {
...
- FB->pixel_format = E;
...
}

@@
struct drm_framebuffer *FB;
expression E;
@@
ironlake_get_initial_plane_config(...) {
...
- FB->pixel_format = E;
...
}

@@
struct drm_framebuffer *FB;
expression E;
@@
skylake_get_initial_plane_config(...) {
...
- FB->pixel_format = E;
...
}

@@
struct drm_framebuffer *a;
struct drm_framebuffer b;
@@
(
- a->pixel_format
+ a->format->format
|
- b.pixel_format
+ b.format->format
)

@@
struct drm_plane_state *a;
struct drm_plane_state b;
@@
(
- a->fb->pixel_format
+ a->fb->format->format
|
- b.fb->pixel_format
+ b.fb->format->format
)

@@
struct drm_crtc *CRTC;
@@
(
- CRTC->primary->fb->pixel_format
+ CRTC->primary->fb->format->format
|
- CRTC->primary->state->fb->pixel_format
+ CRTC->primary->state->fb->format->format
)

@@
struct drm_mode_set *set;
@@
(
- set->fb->pixel_format
+ set->fb->format->format
|
- set->crtc->primary->fb->pixel_format
+ set->crtc->primary->fb->format->format
)

@@
@@
struct drm_framebuffer {
...
- uint32_t pixel_format;
...
};

v2: Fix commit message (Laurent)
Rebase due to earlier removal of many fb->pixel_format uses,
including the 'fb->format = drm_format_info(fb->format->format);'
snafu
v3: Adjusted the semantic patch a bit and regenerated due to code
changes

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481751175-18463-1-git-send-email-ville.syrjala@linux.intel.com

drm: Replace drm_format_plane_cpp() with fb->format->cpp[]

Replace drm_format_plane_cpp(fb->pixel_format) with just
fb->format->cpp[]. Avoids the expensive format info lookup.

@@
struct drm_framebuffer *a;
struct drm_framebuffer b;
expression E;
@@
(
- drm_format_plane_cpp(a->pixel_format, E)
+ a->format->cpp[E]
|
- drm_format_plane_cpp(b.pixel_format, E)
+ b.format->cpp[E]
)

@@
struct drm_plane_state *a;
struct drm_plane_state b;
expression E;
@@
(
- drm_format_plane_cpp(a->fb->pixel_format, E)
+ a->fb->format->cpp[E]
|
- drm_format_plane_cpp(b.fb->pixel_format, E)
+ b.fb->format->cpp[E]
)

@@
struct drm_framebuffer *a;
identifier T;
expression E;
@@
T = a->pixel_format
<+...
- drm_format_plane_cpp(T, E)
+ a->format->cpp[E]
...+>

@@
struct drm_framebuffer b;
identifier T;
expression E;
@@
T = b.pixel_format
<+...
- drm_format_plane_cpp(T, E)
+ b.format->cpp[E]
...+>

v2: Rerun spatch due to code changes

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481751057-18123-1-git-send-email-ville.syrjala@linux.intel.com

drm/mediatek: plane: Use FB's format's cpp to compute x offset

Use the framebuffer's format to compute its cpp, and use it when
calculating the address shift value.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1470279597-60453-7-git-send-email-bibby.hsieh@mediatek.com

drm/mediatek: plane: Merge mtk_plane_enable into mtk_plane_atomic_update

The mtk_plane_enable is just called once by mtk_plane_atomic_update.
So, merge mtk_plane_enable into mtk_plane_atomic_update.

While we are here, also clean up the function a bit by using an fb local
variables.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1470279597-60453-6-git-send-email-bibby.hsieh@mediatek.com

drm/mediatek: Use drm_atomic destroy_state helpers

Use the core destroy_state helpers to destroy core state to ensure we don't
leak if/when more fields get added later.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1470279597-60453-5-git-send-email-bibby.hsieh@mediatek.com

drm/mediatek: Remove mtk_drm_plane

Now that mtk_drm_plane just contains its base struct drm_plane, we can
just remove it and use struct drm_plane everywhere.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1470279597-60453-4-git-send-email-bibby.hsieh@mediatek.com

drm/mediatek: plane: Remove plane zpos/index

It is not actually useful to a mtk plane to know its zpos/index, so just
remove this field.

This let's completely remove struct mtk_drm_plane in a follow up patch.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1470279597-60453-3-git-send-email-bibby.hsieh@mediatek.com

drm/mediatek: Use drm_plane_helper_check_state()

Replace the use of drm_plane_helper_check_update() with
drm_plane_helper_check_state() since we have a plane state.

This also eliminates the double clipping the driver was doing
in both check and commit phases). And it should fix src coordinate
addr adjustement. Previously the driver was expecting negative dst
coordinates after clipping, which is not going happen, so any clipping
induced addr adjustment simply didn't happen. Neither did the driver
respect any user configured src coordinates, so panning and such would
have been totally broken. It should be all good now.

Cc: CK Hu <ck.hu@mediatek.com>
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Tested-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1469549224-1860-9-git-send-email-ville.syrjala@linux.intel.com

drm: Deal with rotation in drm_plane_helper_check_update()

drm_plane_helper_check_update() needs to account for the plane rotation
for correct clipping/scaling calculations. Do so.

There was an earlier attempt [1] to add this into
intel_check_primary_plane() but I requested that it'd be put into the
helper instead. An updated patch never materialized AFAICS, so I went
ahead and cooked one up myself.

v2: Deal with new drm_plane_helper_check_update() callers

[1] https://patchwork.freedesktop.org/patch/65177/
Cc: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466172790-10025-1-git-send-email-ville.syrjala@linux.intel.com

drm: Drop plane argument from __drm_atomic_helper_plane_destroy_state

It's unused, and really this helper should only look at the state
structure and nothing else.

v2: Fix commit message (Laurent).

v3: Rebase onto mtk driver merge.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1462804451-15318-2-git-send-email-daniel.vetter@ffwll.ch

drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.

This patch adds an initial DRM driver for the Mediatek MT8173 DISP
subsystem. It currently supports two fixed output streams from the
OVL0/OVL1 sources to the DSI0/DPI0 sinks, respectively.

Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: YT Shen <yt.shen@mediatek.com>
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Mao Huang <littlecvr@chromium.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>