drm/mediatek: Fix a null pointer crash in mtk_drm_crtc_finish_page_flip

It's possible that mtk_crtc->event is NULL in
mtk_drm_crtc_finish_page_flip().

pending_needs_vblank value is set by mtk_crtc->event, but in
mtk_drm_crtc_atomic_flush(), it's is not guarded by the same
lock in mtk_drm_finish_page_flip(), thus a race condition happens.

Consider the following case:

CPU1 CPU2
step 1:
mtk_drm_crtc_atomic_begin()
mtk_crtc->event is not null,
step 1:
mtk_drm_crtc_atomic_flush:
mtk_drm_crtc_update_config(
!!mtk_crtc->event)
step 2:
mtk_crtc_ddp_irq ->
mtk_drm_finish_page_flip:
lock
mtk_crtc->event set to null,
pending_needs_vblank set to false
unlock
pending_needs_vblank set to true,

step 2:
mtk_crtc_ddp_irq ->
mtk_drm_finish_page_flip called again,
pending_needs_vblank is still true
//null pointer

Instead of guarding the entire mtk_drm_crtc_atomic_flush(), it's more
efficient to just check if mtk_crtc->event is null before use.

Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240223212404.3709690-1-hsinyi@chromium.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Filter modes according to hardware capability

We found a stability issue on MT8188 when connecting an external monitor
in 2560x1440@144Hz mode. Checked with the designer, there is a function
called "prefetch" which is working during VBP (triggered by VSYNC).
If the duration of VBP is too short, the throughput requirement could
increase more than 3 times and lead to stability issues.

The mode settings that VDOSYS supports are mainly affected by clock
rate and throughput, display driver should filter these settings
according to the SoC's limitation to avoid unstable conditions.

Since currently the mode filter is only available on MT8195 and MT8188
and they share the same compatible name, the reference number (8250)
is hard coded instead of in the driver data.

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.corp-partner.google.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240220093711.20546-2-shawn.sung@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Power on/off devices with function pointers

Different from OVL, OVL adaptor is a pseudo device so we didn't
define it in the device tree, consequently, pm_runtime_resume_and_get()
called by .atomic_enable() powers on no device. For this reason, we
implement a function to power on the RDMAs in OVL adaptor, and the
system will make sure the IOMMUs are powered on as well because of the
device link (iommus) in the RDMA nodes in DTS.

This patch separates power and clock management process, it would be
easier to maintain and add extensions.

Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231214055847.4936-15-shawn.sung@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Fix access violation in mtk_drm_crtc_dma_dev_get

Add error handling to check NULL input in
mtk_drm_crtc_dma_dev_get function.

While display path is not configured correctly, none of crtc is
established. So the caller of mtk_drm_crtc_dma_dev_get may pass
input parameter *crtc as NULL, Which may cause coredump when
we try to get the container of NULL pointer.

Fixes: cb1d6bcca542 ("drm/mediatek: Add dma dev get function")
Signed-off-by: Stuart Lee <stuart.lee@mediatek.com>
Cc: stable@vger.kernel.org
Reviewed-by: AngeloGioacchino DEl Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231110012914.14884-2-stuart.lee@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Add spinlock for setting vblank event in atomic_begin

Add spinlock protection to avoid race condition on vblank event
between mtk_drm_crtc_atomic_begin() and mtk_drm_finish_page_flip().

Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Tested-by: Fei Shao <fshao@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230920090658.31181-1-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: gamma: Support SoC specific LUT size

Newer SoCs support a bigger Gamma LUT table: wire up a callback
to retrieve the correct LUT size for each different Gamma IP.

Co-developed-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
[Angelo: Rewritten commit message/description + porting]
Reviewed-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231012095736.100784-4-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Fix iommu fault during crtc enabling

The difference between drm_atomic_helper_commit_tail() and
drm_atomic_helper_commit_tail_rpm() is
drm_atomic_helper_commit_tail() will commit plane first and
then enable crtc, drm_atomic_helper_commit_tail_rpm() will
enable crtc first and then commit plane.

Before mediatek-drm enables crtc, the power and clk required
by OVL have not been turned on, so the commit plane cannot be
committed before crtc is enabled. That means OVL layer should
not be enabled before crtc is enabled.
Therefore, the atomic_commit_tail of mediatek-drm is hooked with
drm_atomic_helper_commit_tail_rpm().

Another reason is that the plane_state of drm_atomic_state is not
synchronized with the plane_state stored in mtk_crtc during crtc enablng,
so just set all planes to disabled.

Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20230809125722.24112-3-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Add connector dynamic selection capability

Add dynamic select available connector flow in mtk_drm_crtc_create()
and mtk_drm_crtc_atomic_enable().

In mtk_drm_crtc_create(), if there is a connector routes array in drm
driver data, all components definded in the connector routes array will
be checked and their encoder_index will be set.

In mtk_drm_crtc_atomic_enable(), crtc will check its encoder_index to
identify which componet in the connector routes array should append.

Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Signed-off-by: Nancy Lin <nancy.lin@mediatek.com>
Signed-off-by: Nathan Lu <nathan.lu@mediatek.com>
Tested-by: Fei Shao <fshao@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231004024013.18956-6-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Remove freeing not dynamic allocated memory

Fixing the coverity issue of:
mtk_drm_cmdq_pkt_destroy frees address of mtk_crtc->cmdq_handle

So remove the free function.

Fixes: 7627122fd1c0 ("drm/mediatek: Add cmdq_handle in mtk_crtc")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230714094908.13087-2-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Acked-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714174545.4056287-1-robh@kernel.org

drm/mediatek: Add drm ovl_adaptor sub driver for MT8195

Add drm ovl_adaptor sub driver. Bring up ovl_adaptor sub driver if
the component exists in the path.

Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20230321121859.2355-7-nancy.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support

MT8195 have two mmsys. Modify drm for MT8195 multi-mmsys support.
The two mmsys (vdosys0 and vdosys1) will bring up two drm drivers,
only one drm driver register as the drm device.
Each drm driver binds its own component. The last bind drm driver
allocates and registers the drm device to drm core.
Each crtc path is created with the corresponding drm driver data.

Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20230321121859.2355-6-nancy.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Add dma dev get function

This is a preparation for adding support for the ovl_adaptor sub driver
Ovl_adaptor is a DRM sub driver, which doesn't have dma dev. Add
dma_dev_get function for getting representative dma dev in ovl_adaptor.

Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioachino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20230321121859.2355-5-nancy.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Refactor pixel format logic

Add an DDP component interface for querying pixel format support
and move list of supported pixel formats into DDP components
instead of mtk_drm_plane.c

Tested by running Chrome on an MT8195.

Signed-off-by: Justin Green <greenjustin@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20230309210416.1167020-2-greenjustin@chromium.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: mtk_drm_crtc: Add checks for devm_kcalloc

As the devm_kcalloc may return NULL, the return value needs to be checked
to avoid NULL poineter dereference.

Fixes: 31c5558dae05 ("drm/mediatek: Refactor plane init")
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20221205095115.2905090-1-ruanjinjie@huawei.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm: Remove unnecessary include statements of drm_plane_helper.h

Remove the include statement for drm_plane_helper.h from all the files
that don't need it. Althogh the header file is almost empty, many drivers
include it somewhere.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-5-tzimmermann@suse.de

drm/mediatek: Add vblank register/unregister callback functions

We encountered a kernel panic issue that callback data will be NULL when
it's using in ovl irq handler. There is a timing issue between
mtk_disp_ovl_irq_handler() and mtk_ovl_disable_vblank().

To resolve this issue, we use the flow to register/unregister vblank cb:
- Register callback function and callback data when crtc creates.
- Unregister callback function and callback data when crtc destroies.

With this solution, we can assure callback data will not be NULL when
vblank is disable.

Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220321072320.15019-1-rex-bc.chen@mediatek.com/
Fixes: 9b0704988b15 ("drm/mediatek: Register vblank callback function")
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: mtk_drm_crtc: Use kmalloc in mtk_drm_crtc_duplicate_state

Optimize mtk_drm_crtc_duplicate_state() by switching from kzalloc() to
kmalloc(): the only variable of this struct that gets checked in other
functions is `pending_config`, but if that's set to false, then all of
the remaining variables will only ever be set, but not read - so, also
set `pending_config` to false.
This saves us some small overhead.

Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220118133759.112458-2-angelogioacchino.delregno@collabora.com/
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Add wait_for_event for crtc disable by cmdq

mtk_drm_crtc_atomic_disable will send an async cmd to cmdq driver,
so it may not finish when cmdq_suspend is called sometimes.

Add wait_for_event after sending async disable plane cmd to make
sure the lastest cmd is done before cmdq_suspend.

Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20211202064039.20797-2-jason-jh.lin@mediatek.com/

media: drm/mediatek: Get rid of mtk_smi_larb_get/put

MediaTek IOMMU has already added the device_link between the consumer
and smi-larb device. If the drm device calls the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.

CC: CK Hu <ck.hu@mediatek.com>
CC: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: drm/mediatek: Add pm runtime support for ovl and rdma

Prepare for smi cleaning up "mediatek,larb".

Display use the dispsys device to call pm_rumtime_get_sync before.
This patch add pm_runtime_xx with ovl and rdma device whose nodes has
"iommus" property, then display could help pm_runtime_get for smi via
ovl or rdma device.

(Yong: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync)

CC: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

drm/mediatek: Clear pending flag when cmdq packet is done

In cmdq mode, packet may be flushed before it is executed, so
the pending flag should be cleared after cmdq packet is done.

Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Add mbox_free_channel in mtk_drm_crtc_destroy

Add mbox_free_channel in mtk_drm_crtc_destroy.

Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Add cmdq_handle in mtk_crtc

One mtk_crtc need just one cmdq_handle, so add one cmdq_handle
in mtk_crtc to prevent frequently allocation and free of
cmdq_handle.

Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>

drm/mediatek: Detect CMDQ execution timeout

CMDQ is used to update display register in vblank period, so
it should be execute in next 2 vblank. One vblank interrupt
before send message (occasionally) and one vblank interrupt
after cmdq done. If it fail to execute in next 3 vblank,
tiemout happen.

Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>

drm/mediatek: Remove the pointer of struct cmdq_client

In mailbox rx_callback, it pass struct mbox_client to callback
function, but it could not map back to mtk_drm_crtc instance
because struct cmdq_client use a pointer to struct mbox_client:

struct cmdq_client {
struct mbox_client client;
struct mbox_chan *chan;
};

struct mtk_drm_crtc {
/* client instance data */
struct cmdq_client *cmdq_client;
};

so remove the pointer of struct cmdq_client and let mtk_drm_crtc
instance define cmdq_client as:

struct mtk_drm_crtc {
/* client instance data */
struct cmdq_client cmdq_client;
};

and in rx_callback function, use struct mbox_client to get
struct mtk_drm_crtc.

Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>

drm/mediatek: Use mailbox rx_callback instead of cmdq_task_cb

rx_callback is a standard mailbox callback mechanism and could cover the
function of proprietary cmdq_task_cb, so use the standard one instead of
the proprietary one.

Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>

Revert "drm/mediatek: Use mailbox rx_callback instead of cmdq_task_cb"

This reverts commit c1ec54b7b5af25c779192253f5a9f05e95cb43d7.

Commit c1ec54b7b5af
("drm/mediatek: Use mailbox rx_callback instead of cmdq_task_cb")
would cause numerous mtk cmdq mailbox driver warning:

WARNING: CPU: 0 PID: 0 at drivers/mailbox/mtk-cmdq-mailbox.c:198
cmdq_task_exec_done+0xb8/0xe0

So revert that patch.

Reported-by: Enric Balletbo Serra <eballetbo@gmail.com>
Tested-by: Enric Balletbo Serra <eballetbo@gmail.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

Revert "drm/mediatek: Remove struct cmdq_client"

This reverts commit f4be17cd5b14dd73545b0e014a63ebe9ab5ef837.

Commit c1ec54b7b5af
("drm/mediatek: Use mailbox rx_callback instead of cmdq_task_cb")
would cause numerous mtk cmdq mailbox driver warning:

WARNING: CPU: 0 PID: 0 at drivers/mailbox/mtk-cmdq-mailbox.c:198
cmdq_task_exec_done+0xb8/0xe0

So revert that patch and all the patches depend on that patch.

Reported-by: Enric Balletbo Serra <eballetbo@gmail.com>
Tested-by: Enric Balletbo Serra <eballetbo@gmail.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

Revert "drm/mediatek: Detect CMDQ execution timeout"

This reverts commit 8cdcb365342402fdeb664479b0a04e9debef8efb.

Commit c1ec54b7b5af
("drm/mediatek: Use mailbox rx_callback instead of cmdq_task_cb")
would cause numerous mtk cmdq mailbox driver warning:

WARNING: CPU: 0 PID: 0 at drivers/mailbox/mtk-cmdq-mailbox.c:198
cmdq_task_exec_done+0xb8/0xe0

So revert that patch and all the patches depend on that patch.

Reported-by: Enric Balletbo Serra <eballetbo@gmail.com>
Tested-by: Enric Balletbo Serra <eballetbo@gmail.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

Revert "drm/mediatek: Add cmdq_handle in mtk_crtc"

This reverts commit bc9241be73d9b2b3bcb7033598521fd669639848.

Commit c1ec54b7b5af
("drm/mediatek: Use mailbox rx_callback instead of cmdq_task_cb")
would cause numerous mtk cmdq mailbox driver warning:

WARNING: CPU: 0 PID: 0 at drivers/mailbox/mtk-cmdq-mailbox.c:198
cmdq_task_exec_done+0xb8/0xe0

So revert that patch and all the patches depend on that patch.

Reported-by: Enric Balletbo Serra <eballetbo@gmail.com>
Tested-by: Enric Balletbo Serra <eballetbo@gmail.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

Revert "drm/mediatek: Clear pending flag when cmdq packet is done"

This reverts commit 9efb16c2fdd647d3888fd8dae84509f485cd554e.

Commit c1ec54b7b5af
("drm/mediatek: Use mailbox rx_callback instead of cmdq_task_cb")
would cause numerous mtk cmdq mailbox driver warning:

WARNING: CPU: 0 PID: 0 at drivers/mailbox/mtk-cmdq-mailbox.c:198
cmdq_task_exec_done+0xb8/0xe0

So revert that patch and all the patches depend on that patch.

Reported-by: Enric Balletbo Serra <eballetbo@gmail.com>
Tested-by: Enric Balletbo Serra <eballetbo@gmail.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Clear pending flag when cmdq packet is done

In cmdq mode, packet may be flushed before it is executed, so
the pending flag should be cleared after cmdq packet is done.

Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Add cmdq_handle in mtk_crtc

One mtk_crtc need just one cmdq_handle, so add one cmdq_handle
in mtk_crtc to prevent frequently allocation and free of
cmdq_handle.

Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Detect CMDQ execution timeout

CMDQ is used to update display register in vblank period, so
it should be execute in next vblank. If it fail to execute
in next 2 vblank, tiemout happen.

Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Remove struct cmdq_client

In mailbox rx_callback, it pass struct mbox_client to callback
function, but it could not map back to mtk_drm_crtc instance
because struct cmdq_client use a pointer to struct mbox_client:

struct cmdq_client {
struct mbox_client client;
struct mbox_chan *chan;
};

struct mtk_drm_crtc {
/* client instance data */
struct cmdq_client *cmdq_client;
};

so remove struct cmdq_client and let mtk_drm_crtc instance define
mbox_client as:

struct mtk_drm_crtc {
/* client instance data */
struct mbox_client cl;
};

and in rx_callback function, use struct mbox_client to get
struct mtk_drm_crtc.

Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Use mailbox rx_callback instead of cmdq_task_cb

rx_callback is a standard mailbox callback mechanism and could cover the
function of proprietary cmdq_task_cb, so use the standard one instead of
the proprietary one.

Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Test component initialization earlier in the function mtk_drm_crtc_create

The initialization is currently tested in a later stage in
the function for no reason.
In addition, the test '!comp' will never fail since comp is
set with the '&' operator. Instead, test if a comp was not
initialized by testing "!comp->dev".

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Fix cursor plane no update

The cursor plane should use the current plane state in atomic_async_update
because it would not be the new plane state in the global atomic state
since _swap_state happened when those hook are run.

Fix cursor plane issue by below modification:
1. Remove plane_helper_funcs->atomic_update(plane, state) in
mtk_drm_crtc_async_update.
2. Add mtk_drm_update_new_state in to mtk_plane_atomic_async_update to
update the cursor plane by current plane state hook and update
others plane by the new_state.

Fixes: 37418bf14c13 ("drm: Use state helper instead of the plane state pointer")
Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Fix PM reference leak in mtk_crtc_ddp_hw_init()

pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Li <wangli74@huawei.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: crtc: Make config-updating atomic

While updating config, the irq would occur and get the partial
config, so use variable config_updating to make updating atomic.

Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/atomic: Pass the full state to planes atomic disable and update

The current atomic helpers have either their object state being passed as
an argument or the full atomic state.

The former is the pattern that was done at first, before switching to the
latter for new hooks or when it was needed.

Let's convert the remaining helpers to provide a consistent interface,
this time with the planes atomic_update and atomic_disable.

The conversion was done using the coccinelle script below, built tested on
all the drivers.

@@
identifier plane, plane_state;
symbol state;
@@

struct drm_plane_helper_funcs {
...
void (*atomic_update)(struct drm_plane *plane,
- struct drm_plane_state *plane_state);
+ struct drm_atomic_state *state);
...
}

@@
identifier plane, plane_state;
symbol state;
@@

struct drm_plane_helper_funcs {
...
void (*atomic_disable)(struct drm_plane *plane,
- struct drm_plane_state *plane_state);
+ struct drm_atomic_state *state);
...
}

@ plane_atomic_func @
identifier helpers;
identifier func;
@@

(
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_update = func,
...,
};
|
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_disable = func,
...,
};
)

@@
struct drm_plane_helper_funcs *FUNCS;
identifier f;
identifier crtc_state;
identifier plane, plane_state, state;
expression e;
@@

f(struct drm_crtc_state *crtc_state)
{
...
struct drm_atomic_state *state = e;
<+...
(
- FUNCS->atomic_disable(plane, plane_state)
+ FUNCS->atomic_disable(plane, state)
|
- FUNCS->atomic_update(plane, plane_state)
+ FUNCS->atomic_update(plane, state)
)
...+>
}

@@
identifier plane_atomic_func.func;
identifier plane;
symbol state;
@@

func(struct drm_plane *plane,
- struct drm_plane_state *state)
+ struct drm_plane_state *old_plane_state)
{
<...
- state
+ old_plane_state
...>
}

@ ignores_old_state @
identifier plane_atomic_func.func;
identifier plane, old_state;
@@

func(struct drm_plane *plane, struct drm_plane_state *old_state)
{
... when != old_state
}

@ adds_old_state depends on plane_atomic_func && !ignores_old_state @
identifier plane_atomic_func.func;
identifier plane, plane_state;
@@

func(struct drm_plane *plane, struct drm_plane_state *plane_state)
{
+ struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane);
...
}

@ depends on plane_atomic_func @
identifier plane_atomic_func.func;
identifier plane, plane_state;
@@

func(struct drm_plane *plane,
- struct drm_plane_state *plane_state
+ struct drm_atomic_state *state
)
{ ... }

@ include depends on adds_old_state @
@@

#include <drm/drm_atomic.h>

@ no_include depends on !include && adds_old_state @
@@

+ #include <drm/drm_atomic.h>
#include <drm/...>

@@
identifier plane_atomic_func.func;
identifier plane, state;
identifier plane_state;
@@

func(struct drm_plane *plane, struct drm_atomic_state *state) {
...
struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane);
<+...
- plane_state->state
+ state
...+>
}

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-9-maxime@cerno.tech

soc / drm: mediatek: Move mtk mutex driver to soc folder

mtk mutex is used by DRM and MDP driver, and its function is SoC-specific,
so move it to soc folder.

Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>

drm/mediatek: Automatically search unclaimed mtk mutex in mtk_mutex_get()

Moving mutex resource management from client driver to mutex driver
could prevent client drivers negotiating for resource management.

Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Change disp/ddp term to mutex in mtk mutex driver

mtk mutex is used by both drm and mdp driver, so change disp/ddp term to
mutex to show that it's a common driver for drm and mdp.

Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Rename file mtk_drm_ddp to mtk_mutex

After mmsys routing function is moved out of mtk_drm_ddp.c, mtk_drm_ddp.c
has only mtk mutex function, so rename it to match the function in it.

Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Move mtk_ddp_comp_init() from sub driver to DRM driver

Some ddp component exist in both display path and other path, so
sub driver should not directly call DRM driver's function. Moving
mtk_ddp_comp_init() from sub driver to DRM driver to achieve this.

Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Register vblank callback function

Some ddp component exist in both display path and other path, so
sub driver should not directly call crtc function. crtc register
callback function to sub driver to prevent sub driver directly
call crtc function.

Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Move clk info from struct mtk_ddp_comp to sub driver private data

Some ddp component exist in both display path and other path, so data
belonged to sub driver should be moved into sub driver private data so it
could be used for multiple path. clk info is one of sub driver data, so
move it.

Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm: automatic legacy gamma support

To support legacy gamma ioctls the drivers need to set
drm_crtc_funcs.gamma_set either to a custom implementation or to
drm_atomic_helper_legacy_gamma_set. Most of the atomic drivers do the
latter.

We can simplify this by making the core handle it automatically.

Move the drm_atomic_helper_legacy_gamma_set() functionality into
drm_color_mgmt.c to make drm_mode_gamma_set_ioctl() use
drm_crtc_funcs.gamma_set if set or GAMMA_LUT property if not.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201211114237.213288-2-tomi.valkeinen@ti.com

soc / drm: mediatek: cmdq: Remove timeout handler in helper function

For each client driver, its timeout handler need to dump hardware register
or its state machine information, and their way to detect timeout are
also different, so remove timeout handler in helper function and
let client driver implement its own timeout handler.

Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20201102000438.29225-1-chunkuang.hu@kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

drm/mediatek/mtk_drm_crtc: Demote seriously out-of-date struct header

This needs someone with in-depth knowledge of the driver to complete.

Fixes the following W=1 kernel build warning(s):

drivers/gpu/drm/mediatek/mtk_drm_crtc.c:62: warning: Function parameter or member 'pending_needs_vblank' not described in 'mtk_drm_crtc'
drivers/gpu/drm/mediatek/mtk_drm_crtc.c:62: warning: Function parameter or member 'event' not described in 'mtk_drm_crtc'
drivers/gpu/drm/mediatek/mtk_drm_crtc.c:62: warning: Function parameter or member 'layer_nr' not described in 'mtk_drm_crtc'
drivers/gpu/drm/mediatek/mtk_drm_crtc.c:62: warning: Function parameter or member 'pending_async_planes' not described in 'mtk_drm_crtc'
drivers/gpu/drm/mediatek/mtk_drm_crtc.c:62: warning: Function parameter or member 'cmdq_client' not described in 'mtk_drm_crtc'
drivers/gpu/drm/mediatek/mtk_drm_crtc.c:62: warning: Function parameter or member 'cmdq_event' not described in 'mtk_drm_crtc'
drivers/gpu/drm/mediatek/mtk_drm_crtc.c:62: warning: Function parameter or member 'hw_lock' not described in 'mtk_drm_crtc'

Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-12-lee.jones@linaro.org

drm: Use state helper instead of CRTC state pointer

Many drivers reference the crtc->pointer in order to get the current CRTC
state in their atomic_begin or atomic_flush hooks, which would be the new
CRTC state in the global atomic state since _swap_state happened when those
hooks are run.

Use the drm_atomic_get_new_crtc_state helper to get that state to make it
more obvious.

This was made using the coccinelle script below:

@ crtc_atomic_func @
identifier helpers;
identifier func;
@@

(
static struct drm_crtc_helper_funcs helpers = {
...,
.atomic_begin = func,
...,
};
|
static struct drm_crtc_helper_funcs helpers = {
...,
.atomic_flush = func,
...,
};
)

@@
identifier crtc_atomic_func.func;
identifier crtc, state;
symbol crtc_state;
expression e;
@@

func(struct drm_crtc *crtc, struct drm_atomic_state *state) {
...
- struct tegra_dc_state *crtc_state = e;
+ struct tegra_dc_state *dc_state = e;
<+...
- crtc_state
+ dc_state
...+>
}

@@
identifier crtc_atomic_func.func;
identifier crtc, state;
symbol crtc_state;
expression e;
@@

func(struct drm_crtc *crtc, struct drm_atomic_state *state) {
...
- struct mtk_crtc_state *crtc_state = e;
+ struct mtk_crtc_state *mtk_crtc_state = e;
<+...
- crtc_state
+ mtk_crtc_state
...+>
}

@ replaces_new_state @
identifier crtc_atomic_func.func;
identifier crtc, state, crtc_state;
@@

func(struct drm_crtc *crtc, struct drm_atomic_state *state) {
...
- struct drm_crtc_state *crtc_state = crtc->state;
+ struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
...
}

@@
identifier crtc_atomic_func.func;
identifier crtc, state, crtc_state;
@@

func(struct drm_crtc *crtc, struct drm_atomic_state *state) {
struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
...
- crtc->state
+ crtc_state
...
}

@ adds_new_state @
identifier crtc_atomic_func.func;
identifier crtc, state;
@@

func(struct drm_crtc *crtc, struct drm_atomic_state *state) {
+ struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
...
- crtc->state
+ crtc_state
...
}

@ include depends on adds_new_state || replaces_new_state @
@@

#include <drm/drm_atomic.h>

@ no_include depends on !include && (adds_new_state || replaces_new_state) @
@@

+ #include <drm/drm_atomic.h>
#include <drm/...>

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "James (Qian) Wang" <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mihail Atanassov <mihail.atanassov@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105164518.392891-1-maxime@cerno.tech

drm/atomic: Pass the full state to CRTC atomic begin and flush

The current atomic helpers have either their object state being passed as
an argument or the full atomic state.

The former is the pattern that was done at first, before switching to the
latter for new hooks or when it was needed.

Let's start convert all the remaining helpers to provide a consistent
interface, starting with the CRTC's atomic_begin and atomic_flush.

The conversion was done using the coccinelle script below, built tested on
all the drivers and actually tested on vc4.

virtual report

@@
struct drm_crtc_helper_funcs *FUNCS;
identifier old_crtc_state, old_state;
identifier crtc;
identifier f;
@@

f(struct drm_crtc_state *old_crtc_state)
{
...
struct drm_atomic_state *old_state = old_crtc_state->state;
<...
- FUNCS->atomic_begin(crtc, old_crtc_state);
+ FUNCS->atomic_begin(crtc, old_state);
...>
}

@@
struct drm_crtc_helper_funcs *FUNCS;
identifier old_crtc_state, old_state;
identifier crtc;
identifier f;
@@

f(struct drm_crtc_state *old_crtc_state)
{
...
struct drm_atomic_state *old_state = old_crtc_state->state;
<...
- FUNCS->atomic_flush(crtc, old_crtc_state);
+ FUNCS->atomic_flush(crtc, old_state);
...>
}

@@
struct drm_crtc_helper_funcs *FUNCS;
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
identifier dev, state;
identifier f;
@@

f(struct drm_device *dev, struct drm_atomic_state *state, ...)
{
<...
- FUNCS->atomic_begin(crtc, crtc_state);
+ FUNCS->atomic_begin(crtc, state);
...>
}

@@
struct drm_crtc_helper_funcs *FUNCS;
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
identifier dev, state;
identifier f;
@@

f(struct drm_device *dev, struct drm_atomic_state *state, ...)
{
<...
- FUNCS->atomic_flush(crtc, crtc_state);
+ FUNCS->atomic_flush(crtc, state);
...>
}

@@
identifier crtc, old_state;
@@

struct drm_crtc_helper_funcs {
...
- void (*atomic_begin)(struct drm_crtc *crtc, struct drm_crtc_state *old_state);
+ void (*atomic_begin)(struct drm_crtc *crtc, struct drm_atomic_state *state);
...
- void (*atomic_flush)(struct drm_crtc *crtc, struct drm_crtc_state *old_state);
+ void (*atomic_flush)(struct drm_crtc *crtc, struct drm_atomic_state *state);
...
}

@ crtc_atomic_func @
identifier helpers;
identifier func;
@@

(
static struct drm_crtc_helper_funcs helpers = {
...,
.atomic_begin = func,
...,
};
|
static struct drm_crtc_helper_funcs helpers = {
...,
.atomic_flush = func,
...,
};
)

@ ignores_old_state @
identifier crtc_atomic_func.func;
identifier crtc, old_state;
@@

void func(struct drm_crtc *crtc,
struct drm_crtc_state *old_state)
{
... when != old_state
}

@ adds_old_state depends on crtc_atomic_func && !ignores_old_state @
identifier crtc_atomic_func.func;
identifier crtc, old_state;
@@

void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state)
{
+ struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc);
...
}

@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
expression E;
type T;
@@

void func(...)
{
...
- T state = E;
+ T crtc_state = E;
<+...
- state
+ crtc_state
...+>

}

@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
type T;
@@

void func(...)
{
...
- T state;
+ T crtc_state;
<+...
- state
+ crtc_state
...+>

}

@@
identifier old_state;
identifier crtc;
@@

void vc4_hvs_atomic_flush(struct drm_crtc *crtc,
- struct drm_crtc_state *old_state
+ struct drm_atomic_state *state
)
{
+ struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc);
...
}

@@
identifier old_state;
identifier crtc;
@@

void vc4_hvs_atomic_flush(struct drm_crtc *crtc,
- struct drm_crtc_state *old_state
+ struct drm_atomic_state *state
);

@@
identifier old_state;
identifier crtc;
@@

void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc,
- struct drm_crtc_state *old_state
+ struct drm_atomic_state *state
)
{
...
}

@@
identifier old_state;
identifier crtc;
@@

void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc,
- struct drm_crtc_state *old_state
+ struct drm_atomic_state *state
);

@@
identifier old_state;
identifier crtc;
@@

void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc,
- struct drm_crtc_state *old_state
+ struct drm_atomic_state *state
)
{
...
}

@@
identifier old_state;
identifier crtc;
@@

void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc,
- struct drm_crtc_state *old_state
+ struct drm_atomic_state *state
);

@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
identifier old_state;
identifier crtc;
@@

void func(struct drm_crtc *crtc,
- struct drm_crtc_state *old_state
+ struct drm_atomic_state *state
)
{ ... }

@ include depends on adds_old_state @
@@

#include <drm/drm_atomic.h>

@ no_include depends on !include && adds_old_state @
@@

+ #include <drm/drm_atomic.h>
#include <drm/...>

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028123222.1732139-2-maxime@cerno.tech

drm/atomic: Pass the full state to CRTC atomic enable/disable

If the CRTC driver ever needs to access the full DRM state, it can't do so
at atomic_enable / atomic_disable time since drm_atomic_helper_swap_state
will have cleared the pointer from the struct drm_crtc_state to the struct
drm_atomic_state before calling those hooks.

In order to allow that, let's pass the full DRM state to atomic_enable and
atomic_disable. The conversion was done using the coccinelle script below,
built tested on all the drivers and actually tested on vc4.

virtual report

@@
struct drm_crtc_helper_funcs *FUNCS;
identifier dev, state;
identifier crtc, crtc_state;
@@

disable_outputs(struct drm_device *dev, struct drm_atomic_state *state)
{
<...
- FUNCS->atomic_disable(crtc, crtc_state);
+ FUNCS->atomic_disable(crtc, state);
...>
}

@@
struct drm_crtc_helper_funcs *FUNCS;
identifier dev, state;
identifier crtc, crtc_state;
@@

drm_atomic_helper_commit_modeset_enables(struct drm_device *dev, struct drm_atomic_state *state)
{
<...
- FUNCS->atomic_enable(crtc, crtc_state);
+ FUNCS->atomic_enable(crtc, state);
...>
}

@@
identifier crtc, old_state;
@@

struct drm_crtc_helper_funcs {
...
- void (*atomic_enable)(struct drm_crtc *crtc, struct drm_crtc_state *old_state);
+ void (*atomic_enable)(struct drm_crtc *crtc, struct drm_atomic_state *state);
...
- void (*atomic_disable)(struct drm_crtc *crtc, struct drm_crtc_state *old_state);
+ void (*atomic_disable)(struct drm_crtc *crtc, struct drm_atomic_state *state);
...
}

@ crtc_atomic_func @
identifier helpers;
identifier func;
@@

(
static struct drm_crtc_helper_funcs helpers = {
...,
.atomic_enable = func,
...,
};
|
static struct drm_crtc_helper_funcs helpers = {
...,
.atomic_disable = func,
...,
};
)

@ ignores_old_state @
identifier crtc_atomic_func.func;
identifier crtc, old_state;
@@

void func(struct drm_crtc *crtc,
struct drm_crtc_state *old_state)
{
... when != old_state
}

@ adds_old_state depends on crtc_atomic_func && !ignores_old_state @
identifier crtc_atomic_func.func;
identifier crtc, old_state;
@@

void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state)
{
+ struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc);
...
}

@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
expression E;
type T;
@@

void func(...)
{
...
- T state = E;
+ T crtc_state = E;
<+...
- state
+ crtc_state
...+>

}

@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
type T;
@@

void func(...)
{
...
- T state;
+ T crtc_state;
<+...
- state
+ crtc_state
...+>

}

@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
identifier old_state;
identifier crtc;
@@

void func(struct drm_crtc *crtc,
- struct drm_crtc_state *old_state
+ struct drm_atomic_state *state
)
{ ... }

@ include depends on adds_old_state @
@@

#include <drm/drm_atomic.h>

@ no_include depends on !include && adds_old_state @
@@

+ #include <drm/drm_atomic.h>
#include <drm/...>

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/845aa10ef171fc0ea060495efef142a0c13f7870.1602161031.git-series.maxime@cerno.tech

drm/mediatek: reduce clear event

No need to clear event again since event always clear before wait.
This fix depend on patch:
"soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api"

Fixes: 2f965be7f9008 ("drm/mediatek: apply CMDQ control flow")
Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Reviewed-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/1594136714-11650-10-git-send-email-dennis-yc.hsieh@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api

Add clear parameter to let client decide if
event should be clear to 0 after GCE receive it.

Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/1594136714-11650-9-git-send-email-dennis-yc.hsieh@mediatek.com
[mb: fix commit message]
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

drm/mediatek: Use CPU when fail to get cmdq event

Even though cmdq client is created successfully, without the cmdq event,
cmdq could not work correctly, so use CPU when fail to get cmdq event.

Fixes: 60fa8c13ab1a ("drm/mediatek: Move gce event property to mutex device node")
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mtk: Use __drm_atomic_helper_crtc_reset

Now also comes with the added benefit of doing a drm_crtc_vblank_off(),
which means vblank state isn't ill-defined and fail-y at driver load
before the first modeset on each crtc.

Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200612160056.2082681-4-daniel.vetter@ffwll.ch

drm/mediatek: Remove debug messages for function calls

Equivalent information can be nowadays obtained using function tracer.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Fix device passed to cmdq

drm device is now probed from mmsys. We need to use mmsys device to get gce
nodes. Fix following errors:

[ 0.740068] mediatek-drm mediatek-drm.1.auto: error -2 can't parse gce-client-reg property (0)
[ 0.748721] mediatek-drm mediatek-drm.1.auto: error -2 can't parse gce-client-reg property (0)
...
[ 2.659645] mediatek-drm mediatek-drm.1.auto: failed to request channel
[ 2.666270] mediatek-drm mediatek-drm.1.auto: failed to request channel

Fixes: 667c769246b0 ("soc / drm: mediatek: Fix mediatek-drm device probing")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

soc: mediatek: cmdq: export finalize function

Export finalize function to client which helps append eoc and jump
command to pkt. Let client decide call finalize or not.

Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/1592749115-24158-9-git-send-email-dennis-yc.hsieh@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

drm: Nuke mode->vrefresh

Get rid of mode->vrefresh and just calculate it on demand. Saves
a bit of space and avoids the cached value getting out of sync
with reality.

Mostly done with cocci, with the following manual fixups:
- Remove the now empty loop in drm_helper_probe_single_connector_modes()
- Fix __MODE() macro in ch7006_mode.c
- Fix DRM_MODE_ARG() macro in drm_modes.h
- Remove leftover comment from samsung_s6d16d0_mode
- Drop the TODO

@@
@@
struct drm_display_mode {
...
- int vrefresh;
...
};

@@
identifier N;
expression E;
@@
struct drm_display_mode N = {
- .vrefresh = E
};

@@
identifier N;
expression E;
@@
struct drm_display_mode N[...] = {
...,
{
- .vrefresh = E
}
,...
};

@@
expression E;
@@
{
DRM_MODE(...),
- .vrefresh = E,
}

@@
identifier M, R;
@@
int drm_mode_vrefresh(const struct drm_display_mode *M)
{
...
- if (M->vrefresh > 0)
- R = M->vrefresh;
- else
if (...) {
...
}
...
}

@@
struct drm_display_mode *p;
expression E;
@@
(
- p->vrefresh = E;
|
- p->vrefresh
+ drm_mode_vrefresh(p)
)

@@
struct drm_display_mode s;
expression E;
@@
(
- s.vrefresh = E;
|
- s.vrefresh
+ drm_mode_vrefresh(&s)
)

@@
expression E;
@@
- drm_mode_vrefresh(E) ? drm_mode_vrefresh(E) : drm_mode_vrefresh(E)
+ drm_mode_vrefresh(E)

@find_substruct@
identifier X;
identifier S;
@@
struct X {
...
struct drm_display_mode S;
...
};

@@
identifier find_substruct.S;
expression E;
identifier I;
@@
{
.S = {
- .vrefresh = E
}
}

@@
identifier find_substruct.S;
identifier find_substruct.X;
expression E;
identifier I;
@@
struct X I[...] = {
...,
.S = {
- .vrefresh = E
}
,...
};

v2: Drop TODO
v3: Rebase
v4: Rebase

Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jerry Han <hanxu5@huaqin.corp-partner.google.com>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Stefan Mavrodiev <stefan@olimex.com>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: "Guido Günther" <agx@sigxcpu.org>
Cc: Purism Kernel Team <kernel@puri.sm>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: linux-amlogic@lists.infradead.org
Cc: nouveau@lists.freedesktop.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428171940.19552-4-ville.syrjala@linux.intel.com

soc / drm: mediatek: Move routing control to mmsys device

Provide a mtk_mmsys_ddp_connect() and mtk_mmsys_disconnect() functions to
replace mtk_ddp_add_comp_to_path() and mtk_ddp_remove_comp_from_path().
Those functions will allow DRM driver and others to control the data
path routing.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

drm/mediatek: Make sure previous message done or be aborted before send

Mediatek CMDQ driver removed atomic parameter and implementation
related to atomic. DRM driver need to make sure previous message
done or be aborted before we send next message.

If previous message is still waiting for event, it means the
setting hasn't been updated into display hardware register,
we can abort the message and send next message to update the
newest setting into display hardware.
If previous message already started, we have to wait it until
transmission has been completed.

So we flush mbox client before we send new message to controller
driver.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm/mediatek: Move gce event property to mutex device node

According mtk hardware design, stream_done0 and stream_done1 are
generated by mutex, so we move gce event property to mutex device mode.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm/mediatek: Ensure the cursor plane is on top of other overlays

Currently the cursor is placed on the first overlay plane, which means
it will be at the bottom of the stack when the hw does the compositing
with anything other than primary plane. Since mtk doesn't support plane
zpos, change the cursor location to the top-most plane.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm/mediatek: Find the cursor plane instead of hard coding it

The cursor and primary planes were hard coded.
Now search for them for passing to drm_crtc_init_with_planes

Signed-off-by: Evan Benn <evanbenn@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm/mediatek: Add ctm property support

Add ctm property support

Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm/mediatek: Add gamma property according to hardware capability

If there is no gamma function in the crtc
display path, don't add gamma property
for crtc

Fixes: 2f3f4dda747c ("drm/mediatek: Add gamma correction.")
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm/mediatek: apply CMDQ control flow

In some Mediatek SoC, there is no "shadow"
registers for performaing an atomic video mode
set or page flip at vblank/vsync.

The CMDQ (Commend Queue) is used to help
update all relevant display controller registers
with critical time limation.

Signed-off-by: YT Shen <yt.shen@mediatek.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm/mediatek: support CMDQ interface in ddp component

The CMDQ (Command Queue) in some Mediatek SoC is used
to help update all relevant display controller registers
with critical time limation.
This patch add cmdq interface in ddp_comp interface,
let all ddp_comp interface can support cpu/cmdq function
at the same time.

Signed-off-by: YT Shen <yt.shen@mediatek.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm/mediatek: disable all the planes in atomic_disable

Under shadow register case, we do not disable all the plane before
disable all the hardwares. Fix it.

Fixes: 9dc84e98a31f ("drm/mediatek: add shadow register support")

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm/mediatek: update cursors by using async atomic update

Support to async updates of cursors by using the new atomic
interface for that.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm/mediatek: handle events when enabling/disabling crtc

The driver currently handles vblank events only when updating planes on
an already enabled CRTC. The atomic update API however allows requesting
an event when enabling or disabling a CRTC. This currently leads to
event objects being leaked in the kernel and to events not being sent
out. Fix it.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm/mediatek: Fix can't get component for external display plane.

The original logic is ok for primary display, but will not find out
component for external display.

For example, plane->index is 6 for external display, but there are only
2 layer nr in external display, and this condition will never happen:
if (plane->index < (count + mtk_ddp_comp_layer_nr(comp)))

Fix this by using the offset of the plane to mtk_crtc->planes as index,
instead of plane->index.

Fixes: d6b53f68356f ("drm/mediatek: Add helper to get component for a plane")
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm/mediatek: Check return value of mtk_drm_ddp_comp_for_plane.

The mtk_drm_ddp_comp_for_plane can return NULL, but the usage doesn't
check for it. Add check for it.

Fixes: d6b53f68356f ("drm/mediatek: Add helper to get component for a plane")
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm/mediatek: Fix can't get component for external display plane.

The original logic is ok for primary display, but will not find out
component for external display.

For example, plane->index is 6 for external display, but there are only
2 layer nr in external display, and this condition will never happen:
if (plane->index < (count + mtk_ddp_comp_layer_nr(comp)))

Fix this by using the offset of the plane to mtk_crtc->planes as index,
instead of plane->index.

Fixes: d6b53f68356f ("drm/mediatek: Add helper to get component for a plane")
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm/mediatek: Check return value of mtk_drm_ddp_comp_for_plane.

The mtk_drm_ddp_comp_for_plane can return NULL, but the usage doesn't
check for it. Add check for it.

Fixes: d6b53f68356f ("drm/mediatek: Add helper to get component for a plane")
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm/mediatek: Plumb supported rotation values from components to plane init

This patch adds the ability for components to expose supported rotations
which will be exposed to userspace via a plane rotation property.

No functional changes in this patch.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm/mediatek: Add plumbing for layer_check hook

This allows components to implement a .layer_check callback for their
layers which is called during atomic_check.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm/mediatek: Add helper to get component for a plane

Instead of hard-coding which components have planes, add a helper
function to walk the components and map a plane index to a component
layer.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm/mediatek: Refactor plane init

Add a couple of functions which enumerate the number of planes for a
component and initialize the planes for a component.

No functional changes in this patch, but it will allow us to selectively
support rotation if the component supports it.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm/mediatek: add ovl0/ovl_2l0 usecase

This patch add ovl0/ovl_2l0 usecase
in ovl->ovl_2l0 direct link usecase:
1. the crtc support layer number will 4+2
2. ovl_2l0 background color input select ovl0 when crtc init
and disable it when crtc finish
3. config ovl_2l0 layer, if crtc config layer number is
bigger than ovl0 support layers(max is 4)

Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm/mediatek: drop use of drmP.h

Drop use of the deprecated drmP.h header file.

While touching the include files divide them up in blocks
in the typical order:

\#include <linux/*>

\#include <video/*>

\#include <drm/*>

\#include ""

And sort the includes in the blocks
Add the necessary includes to fix build after removal of drmP.h

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-20-sam@ravnborg.org

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 655 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/mediatek: adjust ddp clock control flow

display hardware clock will not unprepare when
crtc is disable, until crtc is destroyed.
with this patch, hard clock will disable and unprepare
at the same time.

Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm: Split out drm_probe_helper.h

Having the probe helper stuff (which pretty much everyone needs) in
the drm_crtc_helper.h file (which atomic drivers should never need) is
confusing. Split them out.

To make sure I actually achieved the goal here I went through all
drivers. And indeed, all atomic drivers are now free of
drm_crtc_helper.h includes.

v2: Make it compile. There was so much compile fail on arm drivers
that I figured I'll better not include any of the acks on v1.

v3: Massive rebase because i915 has lost a lot of drmP.h includes, but
not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h
there was still one, which this patch largely removes. Which means
rolling out lots more includes all over.

This will also conflict with ongoing drmP.h cleanup by others I
expect.

v3: Rebase on top of atomic bochs.

v4: Review from Laurent for bridge/rcar/omap/shmob/core bits:
- (re)move some of the added includes, use the better include files in
other places (all suggested from Laurent adopted unchanged).
- sort alphabetically

v5: Actually try to sort them, and while at it, sort all the ones I
touch.

v6: Rebase onto i915 changes.

v7: Rebase once more.

Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: virtualization@lists.linux-foundation.org
Cc: etnaviv@lists.freedesktop.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-tegra@vger.kernel.org
Cc: xen-devel@lists.xen.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch

treewide: Replace more open-coded allocation size multiplications

As done treewide earlier, this catches several more open-coded
allocation size calculations that were added to the kernel during the
merge window. This performs the following mechanical transformations
using Coccinelle:

kvmalloc(a * b, ...) -> kvmalloc_array(a, b, ...)
kvzalloc(a * b, ...) -> kvcalloc(a, b, ...)
devm_kzalloc(..., a * b, ...) -> devm_kcalloc(..., a, b, ...)

Signed-off-by: Kees Cook <keescook@chromium.org>

drm/mediatek: update some variable name from ovl to comp

This patch update some variable name from ovl to comp

Because RDMA would be first HW in ddp, the naming ovl
should be change to comp.

Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm/mediatek: use layer_nr function to get layer number to init plane

This patch use layer_nr function to get layer number to init plane

When plane init in crtc create,
it use the number of OVL layer to init plane.
That's OVL can read 4 memory address.

For mt2712 third ddp, it use RDMA to read memory.
RDMA can read 1 memory address, so it just init one plane.

For compatibility, this patch use mtk_ddp_comp_layer_nr function
to get layer number from their HW component in ddp for plane init.

Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm/mediatek: add third ddp path

This patch create third crtc by third ddp path

Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm: Convert to using %pOF instead of full_name

Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Chen Feng <puck.chen@hisilicon.com>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Carlo Caione <carlo@caione.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Partially-Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
[seanpaul changed subject prefix and fixed conflict in stm/ltdc.c]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: Convert atomic drivers from CRTC .disable() to .atomic_disable()

The CRTC .disable() helper operation is deprecated for atomic drivers,
the new .atomic_disable() helper operation being preferred. Convert all
atomic drivers to .atomic_disable() to avoid cargo-cult use of
.disable() in new drivers.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # for sun4i
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> # for mediatek
Acked-by: Alexey Brodkin <abrodkin@synopsys.com> # for arcpgu
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # for atmel-hlcdc
Tested-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Vincent Abriou <vincent.abriou@st.com> # for sti
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> # for vmwgfx
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170630093646.7928-3-laurent.pinchart+renesas@ideasonboard.com

drm: Add old state pointer to CRTC .enable() helper function

The old state is useful for drivers that need to perform operations at
enable time that depend on the transition between the old and new
states.

While at it, rename the operation to .atomic_enable() to be consistent
with .atomic_disable(), as the .enable() operation is used by atomic
helpers only.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # for sun4i
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> # for imx-drm and mediatek
Acked-by: Alexey Brodkin <abrodkin@synopsys.com> # for arcpgu
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # for atmel-hlcdc
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> # for hdlcd and mali-dp
Acked-by: Stefan Agner <stefan@agner.ch> # for fsl-dcu
Tested-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Vincent Abriou <vincent.abriou@st.com> # for sti
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> # for vmwgfx
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170630093646.7928-2-laurent.pinchart+renesas@ideasonboard.com

drm/mediatek: check for memory allocation failure

If 'devm_kmalloc_array' returns NULL, we should return -ENOMEM as already
done a few lines above instead of deferencing a NULL pointer a few lines
below.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

drm/mediatek: use drm_for_each_connector_iter()

Drop legacy drm_for_each_connector() in favor of the race-free
drm_for_each_connector_iter().

Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511191049.28944-5-gustavo@padovan.org

drm/mediatek: add shadow register support

We need to acquire mutex before using the resources,
and need to release it after finished.
So we don't need to write registers in the blanking period.

Signed-off-by: YT Shen <yt.shen@mediatek.com>
Acked-by: CK Hu <ck.hu@mediatek.com>

drm: mediatek: use vblank hooks in struct drm_crtc_funcs

The vblank hooks in struct drm_driver are deprecated and only meant for
legacy drivers. For modern drivers with DRIVER_MODESET flag, the hooks
in struct drm_crtc_funcs should be used instead.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-14-git-send-email-shawnguo@kernel.org

drm: mediatek: use crtc helper drm_crtc_from_index()

Use drm_crtc_from_index() to find drm_crtc for given index, so that we
do not need to maintain a pointer array in struct mtk_drm_private.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1483961145-18453-4-git-send-email-shawnguo@kernel.org

drm/mediatek: set mt8173 dithering function

Some panels only accept bpc (bit per color) 6-bit.
But, the default bpc in mt8173 display data path is 8-bit.
If we didn't enable dithering function to convert bpc,
display cannot show the smooth grayscale image.

In mt8173, the dithering function in OD (OverDrive) and
GAMMA module, we have to config them with
connector->display_mode.bpc when CRTC initial.

1. Clear the default value at *_DITHER_5 and *_DITHER_7 register.
2. Calculate the LSB_ERR_SHIFT bits and ADD_LSHIFT bits two values.
i.e. Input bpc of OD is 10 bits, we assume the bpc of panel is 6-bit,
so, we need to set 4-bit to LSB_ERR_SHIFT and ADD_LSHIFT bits respectively.
3. Then, set the OD or GAMMA to dithering mode depends on path-1 or path-2.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

drm/mediatek: Add gamma correction.

Add gamma set function to correct brightness values.
It applies arbitrary mapping curve to compensate the
incorrect transfer function of the panel.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

drm/mediatek: Use drm_atomic destroy_state helpers

Use the core destroy_state helpers to destroy core state to ensure we don't
leak if/when more fields get added later.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1470279597-60453-5-git-send-email-bibby.hsieh@mediatek.com

drm/mediatek: Remove mtk_drm_plane

Now that mtk_drm_plane just contains its base struct drm_plane, we can
just remove it and use struct drm_plane everywhere.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1470279597-60453-4-git-send-email-bibby.hsieh@mediatek.com

drm/mediatek: plane: Remove plane zpos/index

It is not actually useful to a mtk plane to know its zpos/index, so just
remove this field.

This let's completely remove struct mtk_drm_plane in a follow up patch.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1470279597-60453-3-git-send-email-bibby.hsieh@mediatek.com

drm: Drop crtc argument from __drm_atomic_helper_crtc_destroy_state

It's unused, and really this helper should only look at the state
structure and nothing else.

v2: Rebase on top of rockchip changes

v3: Drop unrelated hunk, spotted by Laurent.

v4: Rebase onto mtk driver merge.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Mark Yao <mark.yao@rock-chips.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1462804451-15318-1-git-send-email-daniel.vetter@ffwll.ch

drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.

This patch adds an initial DRM driver for the Mediatek MT8173 DISP
subsystem. It currently supports two fixed output streams from the
OVL0/OVL1 sources to the DSI0/DPI0 sinks, respectively.

Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: YT Shen <yt.shen@mediatek.com>
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Mao Huang <littlecvr@chromium.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>