drm/i915/selftests: Fix dependency of some timeouts on HZ

Third argument of i915_request_wait() accepts a timeout value in jiffies.
Most users pass either a simple HZ based expression, or a result of
msecs_to_jiffies(), or MAX_SCHEDULE_TIMEOUT, or a very small number not
exceeding 4 if applicable as that value. However, there is one user --
intel_selftest_wait_for_rq() -- that passes a WAIT_FOR_RESET_TIME symbol,
defined as a large constant value that most probably represents a desired
timeout in ms. While that usage results in the intended value of timeout
on usual x86_64 kernel configurations, it is not portable across different
architectures and custom kernel configs.

Rename the symbol to clearly indicate intended units and convert it to
jiffies before use.

Fixes: 3a4bfa091c46 ("drm/i915/selftest: Fix workarounds selftest for GuC submission")
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Rahul Kumar Singh <rahul.kumar.singh@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222113347.648945-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 6ee3f54b880c91ab2e244eb4ffd4bfed37832b25)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/selftest: fix intel_selftest_modify_policy argument types

The definition of intel_selftest_modify_policy() does not match the
declaration, as gcc-13 points out:

drivers/gpu/drm/i915/selftests/intel_scheduler_helpers.c:29:5: error: conflicting types for 'intel_selftest_modify_policy' due to enum/integer mismatch; have 'int(struct intel_engine_cs *, struct intel_selftest_saved_policy *, u32)' {aka 'int(struct intel_engine_cs *, struct intel_selftest_saved_policy *, unsigned int)'} [-Werror=enum-int-mismatch]
29 | int intel_selftest_modify_policy(struct intel_engine_cs *engine,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/gpu/drm/i915/selftests/intel_scheduler_helpers.c:11:
drivers/gpu/drm/i915/selftests/intel_scheduler_helpers.h:28:5: note: previous declaration of 'intel_selftest_modify_policy' with type 'int(struct intel_engine_cs *, struct intel_selftest_saved_policy *, enum selftest_scheduler_modify)'
28 | int intel_selftest_modify_policy(struct intel_engine_cs *engine,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~

Change the type in the definition to match.

Fixes: 617e87c05c72 ("drm/i915/selftest: Fix hangcheck self test for GuC submission")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117163743.1003219-1-arnd@kernel.org

drm/i915/selftest: fix intel_selftest_modify_policy argument types

The definition of intel_selftest_modify_policy() does not match the
declaration, as gcc-13 points out:

drivers/gpu/drm/i915/selftests/intel_scheduler_helpers.c:29:5: error: conflicting types for 'intel_selftest_modify_policy' due to enum/integer mismatch; have 'int(struct intel_engine_cs *, struct intel_selftest_saved_policy *, u32)' {aka 'int(struct intel_engine_cs *, struct intel_selftest_saved_policy *, unsigned int)'} [-Werror=enum-int-mismatch]
29 | int intel_selftest_modify_policy(struct intel_engine_cs *engine,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/gpu/drm/i915/selftests/intel_scheduler_helpers.c:11:
drivers/gpu/drm/i915/selftests/intel_scheduler_helpers.h:28:5: note: previous declaration of 'intel_selftest_modify_policy' with type 'int(struct intel_engine_cs *, struct intel_selftest_saved_policy *, enum selftest_scheduler_modify)'
28 | int intel_selftest_modify_policy(struct intel_engine_cs *engine,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~

Change the type in the definition to match.

Fixes: 617e87c05c72 ("drm/i915/selftest: Fix hangcheck self test for GuC submission")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117163743.1003219-1-arnd@kernel.org
(cherry picked from commit 8d7eb8ed3f83f248e01a4f548d9c500a950a2c2d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/selftests: Add initial GuC selftest for scrubbing lost G2H

While debugging an issue with full GT resets I went down a rabbit hole
thinking the scrubbing of lost G2H wasn't working correctly. This proved
to be incorrect as this was working just fine but this chase inspired me
to write a selftest to prove that this works. This simple selftest
injects errors dropping various G2H and then issues a full GT reset
proving that the scrubbing of these G2H doesn't blow up.

v2:
(Daniel Vetter)
- Use ifdef instead of macros for selftests
v3:
(Checkpatch)
- A space after 'switch' statement
v4:
(Daniele)
- A comment saying GT won't idle if G2H are lost

Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-12-matthew.brost@intel.com

drm/i915/selftest: Bump selftest timeouts for hangcheck

Some testing environments and some heavier tests are slower than
previous limits allowed for. For example, it can take multiple seconds
for the 'context has been reset' notification handler to reach the
'kill the requests' code in the 'active' version of the 'reset
engines' test. During which time the selftest gets bored, gives up
waiting and fails the test.

There is also an async thread that the selftest uses to pump work
through the hardware in parallel to the context that is marked for
reset. That also could get bored waiting for completions and kill the
test off.

Lastly, the flush at the of various test sections can also see
timeouts due to the large amount of work backed up. This is also true
of the live_hwsp_read test.

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-32-matthew.brost@intel.com

drm/i915/selftest: Fix hangcheck self test for GuC submission

When GuC submission is enabled, the GuC controls engine resets. Rather
than explicitly triggering a reset, the driver must submit a hanging
context to GuC and wait for the reset to occur.

Conversely, one of the tests specifically sends hanging batches to the
engines but wants them to sit around until a manual reset of the full
GT (including GuC itself). That means disabling GuC based engine
resets to prevent those from killing the hanging batch too soon. So,
add support to the scheduling policy helper for disabling resets as
well as making them quicker!

In GuC submission mode, the 'is engine idle' test basically turns into
'is engine PM wakelock held'. Independently, there is a heartbeat
disable helper function that the tests use. For unexplained reasons,
this acquires the engine wakelock before disabling the heartbeat and
only releases it when re-enabling the heartbeat. As one of the tests
tries to do a wait for idle in the middle of a heartbeat disabled
section, it is therefore guaranteed to always fail. Added a 'no_pm'
variant of the heartbeat helper that allows the engine to be asleep
while also having heartbeats disabled.

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-31-matthew.brost@intel.com

drm/i915/selftest: Fix workarounds selftest for GuC submission

When GuC submission is enabled, the GuC controls engine resets. Rather
than explicitly triggering a reset, the driver must submit a hanging
context to GuC and wait for the reset to occur.

Signed-off-by: Rahul Kumar Singh <rahul.kumar.singh@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-28-matthew.brost@intel.com