drm/i915/perf: Pass i915 object to perf revision helper

In some cases, perf revision may rely on specific steppings of a
platform. To determine the platform, pass i915 object to the perf
revision helper.

Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-11-umesh.nerlige.ramappa@intel.com

drm/i915/perf: Fail modprobe if i915_perf_init fails on OOM

i915_perf_init can fail due to OOM. Fail driver init if i915_perf_init
fails.

v2: (Jani)
- Reorder patch in the series

Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-6-umesh.nerlige.ramappa@intel.com

drm/i915/perf: Apply Wa_18013179988

OA reports in the OA buffer contain an OA timestamp field that helps
user calculate delta between 2 OA reports. The calculation relies on the
CS timestamp frequency to convert the timestamp value to nanoseconds.
The CS timestamp frequency is a function of the CTC_SHIFT value in
RPM_CONFIG0.

In DG2, OA unit assumes that the CTC_SHIFT is 3, instead of using the
actual value from RPM_CONFIG0. At the user level, this results in an
error in calculating delta between 2 OA reports since the OA timestamp
is not shifted in the same manner as CS timestamp. Also the periodicity
of the reports is different from what the user configured because of
mismatch in the CS and OA frequencies.

The issue also affects MI_REPORT_PERF_COUNT command.

To resolve this, return actual OA timestamp frequency to the user in
i915_getparam_ioctl, so that user can calculate the right OA exponent as
well as interpret the reports correctly.

MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18893

v2:
- Use REG_FIELD_GET (Ashutosh)
- Update commit msg

Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026222102.5526-13-umesh.nerlige.ramappa@intel.com

drm/i915: Use a table for i915_init/exit (v2)

If the driver was not fully loaded, we may still have globals lying
around. If we don't tear those down in i915_exit(), we'll leak a bunch
of memory slabs. This can happen two ways: use_kms = false and if we've
run mock selftests. In either case, we have an early exit from
i915_init which happens after i915_globals_init() and we need to clean
up those globals.

The mock selftests case is especially sticky. The load isn't entirely
a no-op. We actually do quite a bit inside those selftests including
allocating a bunch of mock objects and running tests on them. Once all
those tests are complete, we exit early from i915_init(). Perviously,
i915_init() would return a non-zero error code on failure and a zero
error code on success. In the success case, we would get to i915_exit()
and check i915_pci_driver.driver.owner to detect if i915_init exited early
and do nothing. In the failure case, we would fail i915_init() but
there would be no opportunity to clean up globals.

The most annoying part is that you don't actually notice the failure as
part of the self-tests since leaking a bit of memory, while bad, doesn't
result in anything observable from userspace. Instead, the next time we
load the driver (usually for next IGT test), i915_globals_init() gets
invoked again, we go to allocate a bunch of new memory slabs, those
implicitly create debugfs entries, and debugfs warns that we're trying
to create directories and files that already exist. Since this all
happens as part of the next driver load, it shows up in the dmesg-warn
of whatever IGT test ran after the mock selftests.

While the obvious thing to do here might be to call i915_globals_exit()
after selftests, that's not actually safe. The dma-buf selftests call
i915_gem_prime_export which creates a file. We call dma_buf_put() on
the resulting dmabuf which calls fput() on the file. However, fput()
isn't immediate and gets flushed right before syscall returns. This
means that all the fput()s from the selftests don't happen until right
before the module load syscall used to fire off the selftests returns
which is after i915_init(). If we call i915_globals_exit() in
i915_init() after selftests, we end up freeing slabs out from under
objects which won't get released until fput() is flushed at the end of
the module load syscall.

The solution here is to let i915_init() return success early and detect
the early success in i915_exit() and only tear down globals and nothing
else. This way the module loads successfully, regardless of the success
or failure of the tests. Because we've not enumerated any PCI devices,
no device nodes are created and it's entirely useless from userspace.
The only thing the module does at that point is hold on to a bit of
memory until we unload it and i915_exit() is called. Importantly, this
means that everything from our selftests has the ability to properly
flush out between i915_init() and i915_exit() because there is at least
one syscall boundary in between.

In order to handle all the delicate init/exit cases, we convert the
whole thing to a table of init/exit pairs and track the init status in
the new init_progress global. This allows us to ensure that i915_exit()
always tears down exactly the things that i915_init() successfully
initialized. We also allow early-exit of i915_init() without failure by
an init function returning > 0. This is useful for nomodeset, and
selftests. For the mock selftests, we convert them to always return 1
so we get the desired behavior of the driver always succeeding to load
the driver and then properly tearing down the partially loaded driver.

v2 (Tvrtko Ursulin):
- Guard init_funcs[i].exit with GEM_BUG_ON(i >= ARRAY_SIZE(init_funcs))
v2 (Daniel Vetter):
- Update the docstring for i915.mock_selftests

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721152358.2893314-4-jason@jlekstrand.net

drm/i915/perf: Register sysctl path globally

We do not require to register the sysctl paths per instance,
so making registration global.

v2: make sysctl path register and unregister function driver
specific (Tvrtko and Lucas).

Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213155152.69182-1-venkata.s.dhanalakota@intel.com

drm/i915/perf: introduce a versioning of the i915-perf uapi

Reporting this version will help application figure out what level of
the support the running kernel provides.

v2: Add i915_perf_ioctl_version() (Chris)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191014201404.22468-1-chris@chris-wilson.co.uk

drm/i915/perf: allow for CS OA configs to be created lazily

Here we introduce a mechanism by which the execbuf part of the i915
driver will be able to request that a batch buffer containing the
programming for a particular OA config be created.

We'll execute these OA configuration buffers right before executing a
set of userspace commands so that a particular user batchbuffer be
executed with a given OA configuration.

This mechanism essentially allows the userspace driver to go through
several OA configuration without having to open/close the i915/perf
stream.

v2: No need for locking on object OA config object creation (Chris)
Flush cpu mapping of OA config (Chris)

v3: Properly deal with the perf_metric lock (Chris/Lionel)

v4: Fix oa config unref/put when not found (Lionel)

v5: Allocate BOs for configurations on the stream instead of globally
(Lionel)

v6: Fix 64bit division (Chris)

v7: Store allocated config BOs into the stream (Lionel)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191012072308.30312-1-chris@chris-wilson.co.uk

drm/i915/perf: move perf types to their own header

Following a pattern used throughout the driver.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190909093116.7747-7-lionel.g.landwerlin@intel.com

drm/i915/selftests: Verify the LRC register layout between init and HW

Before we submit the first context to HW, we need to construct a valid
image of the register state. This layout is defined by the HW and should
match the layout generated by HW when it saves the context image.
Asserting that this should be equivalent should help avoid any undefined
behaviour and verify that we haven't missed anything important!

Of course, having insisted that the initial register state within the
LRC should match that returned by HW, we need to ensure that it does.

v2: Drop the RELATIVE_MMIO flag from gen11, we ignore it for
constructing the lrc image.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190924145950.3011-1-chris@chris-wilson.co.uk

drm/i915: extract i915_perf.h from i915_drv.h

It used to be handy that we only had a couple of headers, but over time
i915_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d7826e365695f691a3ac69a69ff6f2bbdb62700d.1565271681.git.jani.nikula@intel.com