drm/i915/dpio: move dpio_channel and dpio_phy enums to intel_dpio_phy.h

Reduce the size of intel_display.h by moving out the dpio_channel and
dpio_phy enums.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7c3ee7a6482540a0267f7b2974d22cab8188707a.1667383630.git.jani.nikula@intel.com

drm/i915/gvt: devirtualize ->{read,write}_gpa

Just call the VFIO functions directly instead of through the method
table.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-14-hch@lst.de
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915: Only include i915_reg.h from .c files

Several of our i915 header files, have been including i915_reg.h. This
means that any change to i915_reg.h will trigger a full rebuild of
pretty much every file of the driver, even those that don't have any
kind of register access. Let's delete the i915_reg.h include from all
headers and add an explicit include from the .c files that truly
need the register definitions; those that need a definition of
i915_reg_t for a function definition can get it from i915_reg_defs.h
instead.

We also remove two non-register #define's (VLV_DISPLAY_BASE and
GEN12_SFC_DONE_MAX) into i915_reg_defs.h to allow us to drop the
i915_reg.h include from a couple of headers.

There's probably a lot more header dependency optimization possible, but
the changes here roughly cut the number of files compiled after 'touch
i915_reg.h' in half --- a good first step.

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-7-matthew.d.roper@intel.com

drm/i915: Move GT registers to their own header file

This is a huge, chaotic mass of registers copied over as-is without any
real cleanup. We'll come back and organize these better, align on
consistent coding style, remove dead code, etc. in separate patches
later that will be easier to review.

v2:
- Add missing include in intel_pxp_irq.c
v3:
- Correct a few indentation errors (Lucas)
- Minor conflict resolution

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-6-matthew.d.roper@intel.com

drm/i915/gvt: Fix virtual display setup for BXT/APL

Program display related vregs to proper value at initialization, setup
virtual monitor and hotplug.

vGPU virtual display vregs inherit the value from pregs. The virtual DP
monitor is always setup on PORT_B for BXT/APL. However the host may
connect monitor on other PORT or without any monitor connected. Without
properly setup PIPE/DDI/PLL related vregs, guest driver may not setup
the virutal display as expected, and the guest desktop may not be
created.
Since only one virtual display is supported, enable PIPE_A only. And
enable transcoder/DDI/PLL based on which port is setup for BXT/APL.

V2:
Revise commit message.

V3:
set_edid should on PORT_B for BXT.
Inject hpd event for BXT.

V4:
Temporarily disable vfio edid on BXT/APL until issue fixed.

V5:
Rebase to use new HPD define GEN8_DE_PORT_HOTPLUG for BXT.
Put vfio edid disabling on BXT/APL to a separate patch.

Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20201109073922.757759-1-colin.xu@intel.com

drm/i915/gvt: Init vreg GUC_STATUS to GS_MIA_IN_RESET

Although GVT doesn't support guest GuC, MIA core is still expected
to be GS_MIA_IN_RESET after uc HW reset.

Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200819010900.54598-1-colin.xu@intel.com

drm/i915/gvt: Wean gvt off using dev_priv

Teach gvt to use intel_gt directly as it currently assumes direct HW
access.

[Zhenyu: rebase, fix compiling]

Cc: Ding Zhuocheng <zhuocheng.ding@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200304032307.2983-3-zhenyuw@linux.intel.com

drm/i915/gvt: Make WARN* drm specific where vgpu ptr is available

Drm specific drm_WARN* calls include device information in the
backtrace, so we know what device the warnings originate from.

Covert all the calls of WARN* with device specific drm_WARN*
variants in functions where drm_device struct pointer is readily
available.

The conversion was done automatically with below coccinelle semantic
patch. checkpatch errors/warnings are fixed manually.

@@
identifier func, T;
@@
func(struct intel_vgpu *T,...) {
+struct drm_i915_private *i915 = T->gvt->dev_priv;
<+...
(
-WARN(
+drm_WARN(&i915->drm,
...)
|
-WARN_ON(
+drm_WARN_ON(&i915->drm,
...)
|
-WARN_ONCE(
+drm_WARN_ONCE(&i915->drm,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(&i915->drm,
...)
)
...+>

}

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200220165507.16823-9-pankaj.laxminarayan.bharadiya@intel.com

drm/i915/gvt: remove the unused sreg

code cleanup. sreg is not used now. remove it for code cleanness.

v3: remove unnecessary array_size in vreg's memory allocation (min he)
v2: do not allocate memory for sreg. (min he)

Reviewed-by: He, Min <min.he@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Init PHY related registers for BXT

Recent patch fixed the call trace
"ERROR Port B enabled but PHY powered down? (PHY_CTL 00000000)".
but introduced another similar call trace shown as:
"ERROR Port C enabled but PHY powered down? (PHY_CTL 00000200)".
The call trace will appear when host and guest enabled different ports,
i.e. host using PORT C or neither PORT is enabled, while guest is always
using PORT B as simulated by gvt. The issue is actually covered previously
before the commit and reverals now when the commit do the right thing.

On BXT, some PHY registers are initialized by vbios, before i915 loaded.
Later i915 will re-program some, or skip some based on the implementation.
The initialized mmio for guest i915 is done by gvt, based on the snapshot
taken from host. If host and guest have different PORT enabled, some
DPIO PHY mmios that gvt initialized for guest i915 will not match the
simualted monitor for guest, which leads to guest i915 print the calltrace
when it's trying to enable PHY and PORT.

The solution is to init these DPIO PHY registers to default value, then
guest i915 will program them to reasonable value based on the default
powerwell table and enabled PORT. Together with the old patch, all similar
call trace in guest kernel on BXT can be resolved.

v2: Move PHY register init to intel_vgpu_reset_mmio (Min)
v3: Do not delete empty line in issue fix patch. (zhenyu)

Fixes: c8ab5ac30ccc ("drm/i915/gvt: Make correct handling to vreg
BXT_PHY_CTL_FAMILY")
Reviewed-by: He, Min <min.he@intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Fix function comment doc errors

Caught by W=1 to fix left wrong function comment doc.

Reviewed-by: Hang Yuan <hang.yuan@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

treewide: Use array_size() in vzalloc()

The vzalloc() function has no 2-factor argument form, so multiplication
factors need to be wrapped in array_size(). This patch replaces cases of:

vzalloc(a * b)

with:
vzalloc(array_size(a, b))

as well as handling cases of:

vzalloc(a * b * c)

with:

vzalloc(array3_size(a, b, c))

This does, however, attempt to ignore constant size factors like:

vzalloc(4 * 1024)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
vzalloc(
- (sizeof(TYPE)) * E
+ sizeof(TYPE) * E
, ...)
|
vzalloc(
- (sizeof(THING)) * E
+ sizeof(THING) * E
, ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
vzalloc(
- sizeof(u8) * (COUNT)
+ COUNT
, ...)
|
vzalloc(
- sizeof(__u8) * (COUNT)
+ COUNT
, ...)
|
vzalloc(
- sizeof(char) * (COUNT)
+ COUNT
, ...)
|
vzalloc(
- sizeof(unsigned char) * (COUNT)
+ COUNT
, ...)
|
vzalloc(
- sizeof(u8) * COUNT
+ COUNT
, ...)
|
vzalloc(
- sizeof(__u8) * COUNT
+ COUNT
, ...)
|
vzalloc(
- sizeof(char) * COUNT
+ COUNT
, ...)
|
vzalloc(
- sizeof(unsigned char) * COUNT
+ COUNT
, ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
vzalloc(
- sizeof(TYPE) * (COUNT_ID)
+ array_size(COUNT_ID, sizeof(TYPE))
, ...)
|
vzalloc(
- sizeof(TYPE) * COUNT_ID
+ array_size(COUNT_ID, sizeof(TYPE))
, ...)
|
vzalloc(
- sizeof(TYPE) * (COUNT_CONST)
+ array_size(COUNT_CONST, sizeof(TYPE))
, ...)
|
vzalloc(
- sizeof(TYPE) * COUNT_CONST
+ array_size(COUNT_CONST, sizeof(TYPE))
, ...)
|
vzalloc(
- sizeof(THING) * (COUNT_ID)
+ array_size(COUNT_ID, sizeof(THING))
, ...)
|
vzalloc(
- sizeof(THING) * COUNT_ID
+ array_size(COUNT_ID, sizeof(THING))
, ...)
|
vzalloc(
- sizeof(THING) * (COUNT_CONST)
+ array_size(COUNT_CONST, sizeof(THING))
, ...)
|
vzalloc(
- sizeof(THING) * COUNT_CONST
+ array_size(COUNT_CONST, sizeof(THING))
, ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

vzalloc(
- SIZE * COUNT
+ array_size(COUNT, SIZE)
, ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
vzalloc(
- sizeof(TYPE) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
vzalloc(
- sizeof(TYPE) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
vzalloc(
- sizeof(TYPE) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
vzalloc(
- sizeof(TYPE) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
vzalloc(
- sizeof(THING) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
vzalloc(
- sizeof(THING) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
vzalloc(
- sizeof(THING) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
vzalloc(
- sizeof(THING) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
vzalloc(
- sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
vzalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
vzalloc(
- sizeof(THING1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
vzalloc(
- sizeof(THING1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
vzalloc(
- sizeof(TYPE1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
|
vzalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
vzalloc(
- (COUNT) * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
vzalloc(
- COUNT * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
vzalloc(
- COUNT * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
vzalloc(
- (COUNT) * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
vzalloc(
- COUNT * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
vzalloc(
- (COUNT) * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
vzalloc(
- (COUNT) * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
vzalloc(
- COUNT * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
)

// Any remaining multi-factor products, first at least 3-factor products
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
vzalloc(C1 * C2 * C3, ...)
|
vzalloc(
- E1 * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
)

// And then all remaining 2 factors products when they're not all constants.
@@
expression E1, E2;
constant C1, C2;
@@

(
vzalloc(C1 * C2, ...)
|
vzalloc(
- E1 * E2
+ array_size(E1, E2)
, ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>

drm/i915/gvt: Use vgpu_lock to protect per vgpu access

The patch set splits out 2 small locks from the original big gvt lock:
- vgpu_lock protects per-vGPU data and logic, especially the vGPU
trap emulation path.
- sched_lock protects gvt scheudler structure, context schedule logic
and vGPU's schedule data.

Use vgpu_lock to replace the gvt big lock. By doing this, the
mmio read/write trap path, vgpu virtual event emulation and other
vgpu related process, would be protected under per vgpu_lock.

v9:
- Change commit author since the patches are improved a lot compared
with original version.
Original author: Pei Zhang <pei.zhang@intel.com>
- Rebase to latest gvt-staging.
v8:
- Correct coding and comment style.
- Rebase to latest gvt-staging.
v7:
- Remove gtt_lock since already proteced by gvt_lock and vgpu_lock.
- Fix a typo in intel_gvt_deactivate_vgpu, unlock the wrong lock.
v6:
- Rebase to latest gvt-staging.
v5:
- Rebase to latest gvt-staging.
- intel_vgpu_page_track_handler should use vgpu_lock.
v4:
- Rebase to latest gvt-staging.
- Protect vgpu->active access with vgpu_lock.
- Do not wait gpu idle in vgpu_lock.
v3: update to latest code base
v2: add gvt->lock in function gvt_check_vblank_emulation

Performance comparison on Kabylake platform.
- Configuration:
Host: Ubuntu 16.04.
Guest 1 & 2: Ubuntu 16.04.

glmark2 score comparison:
- Configuration:
Host: glxgears.
Guests: glmark2.
+--------------------------------+-----------------+
| Setup | glmark2 score |
+--------------------------------+-----------------+
| unified lock, iommu=on | 58~62 (avg. 60) |
+--------------------------------+-----------------+
| unified lock, iommu=igfx_off | 57~61 (avg. 59) |
+--------------------------------+-----------------+
| per-logic lock, iommu=on | 60~68 (avg. 64) |
+--------------------------------+-----------------+
| per-logic lock, iommu=igfx_off | 61~67 (avg. 64) |
+--------------------------------+-----------------+

lock_stat comparison:
- Configuration:
Stop lock stat immediately after boot up.
Boot 2 VM Guests.
Run glmark2 in guests.
Start perf lock_stat for 20 seconds and stop again.
- Legend: c - contentions; w - waittime-avg
+------------+-----------------+-----------+---------------+------------+
| | gvt_lock |sched_lock | vgpu_lock | gtt_lock |
+ lock type; +-----------------+-----------+---------------+------------+
| iommu set | c | w | c | w | c | w | c | w |
+------------+-------+---------+----+------+------+--------+-----+------+
| unified; | 20697 | 839 |N/A | N/A | N/A | N/A | N/A | N/A |
| on | | | | | | | | |
+------------+-------+---------+----+------+------+--------+-----+------+
| unified; | 21838 | 658.15 |N/A | N/A | N/A | N/A | N/A | N/A |
| igfx_off | | | | | | | | |
+------------+-------+---------+----+------+------+--------+-----+------+
| per-logic; | 1553 | 1599.96 |9458|429.97| 5846 | 274.33 | 0 | 0.00 |
| on | | | | | | | | |
+------------+-------+---------+----+------+------+--------+-----+------+
| per-logic; | 1911 | 1678.32 |8335|445.16| 5451 | 244.80 | 0 | 0.00 |
| igfx_off | | | | | | | | |
+------------+-------+---------+----+------+------+--------+-----+------+

Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Remove disable_warn_untrack and print untracked mmio with debug level

The disable_warn_untrack never prevent gvt from printing untracked
mmio errors. We were disturbed by this error storm and the fix is
just adding them to the list with no essential new change.

This message is only useful for enabling new platform during
developing process. So lower the message level to debug and then
remove disable_warn_untrack.

Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Rename ggtt related functions to be more specific

Accurate names help to avoid confusing so improve readability.

Signed-off-by: Changbin Du <changbin.du@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Rework shadow graphic memory management code

This is a big one and the GVT shadow graphic memory management code is
heavily refined. The new code is more straightforward with less code.

The struct intel_vgpu_mm is restructured to be clearly defined, use
accurate names and some of the original fields are removed which are
really redundant.

Now we only manage ppgtt mm object with mm->ppgtt_mm.lru_list. No need
to mix ppgtt and ggtt together, since one vGPU only has one ggtt object.

v4: Don't invoke ppgtt_free_all_shadow_page before intel_vgpu_destroy_all_ppgtt_mm.
v3: Add GVT_RING_CTX_NR_PDPS to avoid confusing about the PDPs.
v2: Split some changes into small standalone patches.

Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Fix aperture read/write emulation when enable x-no-mmap=on

When add 'x-no-mmap=on' for vfio-pci option, aperture access in guest
is emulated. But the vgpu_aperture_rw() function take wrong offset when
do memcpy, since vgpu->gm.aperture_va is not the base of entire aperture.
This mistake cause GPU command in guest get lost and so the seqno is not
updated in engine HWSP.

This patch fix this, and it also move the emulation code to kvmgt.
Because only vfio need to emulate it. Put aperture rw to MMIO emulation
path breaks assumptions in xengt.

v2: Remove PAGE_ALIGN for size (zhenyu)

Fixes: f090a00df9ec ("drm/i915/gvt: Add emulation for BAR2 (aperture) with normal file RW approach")
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/gvt: move write protect handler out of mmio emulation function

It's a bit confusing that page write protect handler is live in
mmio emulation handler. This moves it to stand alone gvt ops.

Also remove unnecessary check of write protected page access
in mmio read handler and cleanup handling of failsafe case.

v2: rebase

Reviewed-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: cleanup usage for typed mmio reg vs. offset

We had previous hack that tried to accept either i915_reg_t or offset
value to access vGPU virtual/shadow regs which broke that purpose to
be type safe in context. This one trys to explicitly separate the usage
of typed mmio reg with real offset.

Old vgpu_vreg(offset) helper is used only for offset now with new
vgpu_vreg_t(reg) is used for i915_reg_t only. Convert left usage
of that to new helper.

Also fixed left KASAN warning issues caused by previous hack.

v2: rebase, fixup against recent mmio switch change

Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: refine function emulate_mmio_read/write

These 2 functions are coded by multiple person in multiple patches. The
'return' and 'goto err' are mix-used in same place, which cause the
function looks disorder. Unify to use only 'goto' so that the gvt lock
is acquired in one place and released in one place.

Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Factor intel_vgpu_page_track

As the data structure of "intel_vgpu_guest_page" will become much heavier
in future, it's better to factor out the guest memory page track mechnisim
as early as possible.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Add emulation for BAR2 (aperture) with normal file RW approach

For vfio-pci, if the region support MMAP then it should support both
mmap and normal file access. The user-space is free to choose which is
being used. For qemu, we just need add 'x-no-mmap=on' for vfio-pci
option.

Currently GVTg only support MMAP for BAR2. So GVTg will not work when
user turn on x-no-mmap option.

This patch added file style access for BAR2, aka the GPU aperture. We
map the entire aperture partition of active vGPU to kernel space when
guest driver try to enable PCI Memory Space. Then we redirect the file
RW operation from kvmgt to this mapped area.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=1458032
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Refine virtual reset function

during the emulation of virtual reset:
1. only reset the engine related mmio ending with MMIO
offset Master_IRQ, not include display stuff.

2. fences are not required to set default
value as well to prevent screen flicking.

this will fix the issue of Guest screen hang while running
Force tdr in Linux guest.

v2:
- only reset the engine related mmio. (Zhenyu & Zhiyuan)
v3:
- IMR/Ring mode registers are not save/restored. (Changbin)
v4:
- redefine the MMIO reset offset for easy understanding. (Zhenyu)
- pvinfo can be reset. (Zhenyu)
v5:
- add more comments for mmio reset. (Zhenyu)

Cc: Changbin Du <changbin.du@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Lv zhiyuan <zhiyuan.lv@intel.com>
Cc: Zhang Yulei <yulei.zhang@intel.com>
Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Optimize MMIO register handling for some large MMIO blocks

Some of traced MMIO registers are a large continuous section. These
stuffed the MMIO lookup hash table and so waste lots of memory and
get much lower lookup performance.

Here we picked out these sections by special handling. These sections
include:
o Display pipe registers, total 768.
o The PVINFO page, total 1024.
o MCHBAR_MIRROR, total 65536.
o CSR_MMIO, total 3072.

So we removed 70,400 items from the hash table, and speed up guest
boot time by ~500ms.

v2:
o add a local function find_mmio_block().
o fix comments.

Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: add RING_INSTDONE and SC_INSTDONE mmio handler in GVT-g

kernel hangcheck needs to check RING_INSTDONE and SC_INSTDONE registers'
state to know if hardware is still running. In GVT-g environment, we need
to emulate these registers changing for all the guests although they are
not render owner. Here we return the physical state for all the guests,
then if INSTDONE is changing guest can know hardware is still running
although its workload is pending.

Read INSTDONE isn't one correct way to know if guest trigger gfx reset,
especially with Linux guest, it will read ACTH first, then check INSTDONE
and SUBSLICE registers to check if hardware is still running, at last
trigger gfx reset when it finds all the registers is frozen. In Windows
guest, read INSTDONE usually happens when OS detect TDR.

With the difference between Windows and Linux guest, "disable_warn_untrack"
may let debug log run into wrong state(Linux guest trigger hangcheck
with no ACTHD changed, then check INSTDONE), but actually there is no TDR
happened.

The new policy is always WARN with untrack MMIO r/w. Bad effect is many
noisy untrack mmio warning logs exist when real TDR happen. Even so you can
control the log output or not by setting the debug mask bit.

v2: remove log in instdone_mmio_read

Suggested-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: replace the gvt_err with gvt_vgpu_err

gvt_err should be used only for the very few critical error message
during host i915 drvier initialization. This patch
1. removes the redundant gvt_err;
2. creates a new gvt_vgpu_err to show errors caused by vgpu;
3. replaces the most gvt_err with gvt_vgpu_err;
4. leaves very few gvt_err for dumping gvt error during host gvt
initialization.

v2. change name to gvt_vgpu_err and add vgpu id to the message. (Kevin)
add gpu id to gvt_vgpu_err. (Zhi)
v3. remove gpu id from gvt_vgpu_err caller. (Zhi)
v4. add vgpu check to the gvt_vgpu_err macro. (Zhiyuan)
v5. add comments for v3 and v4.
v6. split the big patch into two, with this patch only for checking
gvt_vgpu_err. (Zhenyu)
v7. rebase to staging branch
v8. rebase to fix branch

Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: decrease priority of output msg for untracked mmio

When untracked mmio is visited, too many log info will be printed out,
it may confuse the user, but most of the time, it is not the urgent case,
so use gvt_dbg_mmio() instead.

Signed-off-by: Zhao, Xinda <xinda.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: handle fence reg access during GPU reset

Lots of reduntant log info will be printed out during GPU reset,
including accessing untracked mmio register and fence register,
variable disable_warn_untrack is added previously to handle the
situation, but the accessing of fence register is ignored in the
previously patch, so add it back.

Besides, set the variable disable_warn_untrack to the defalut value
after GPU reset is finished.

Signed-off-by: Zhao, Xinda <xinda.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: introduced failsafe mode into vgpu

New failsafe mode is introduced, when we detect guest not supporting
GVT-g.
In failsafe mode, we will ignore all the MMIO and cfg space read/write
from guest.

This patch can fix the issue that when guest kernel or graphics driver
version is too low, there will be a lot of kernel traces in host.

V5: rebased onto latest gvt-staging
V4: changed coding style by Zhenyu and Ping's advice
V3: modified coding style and error messages according to Zhenyu's comment
V2: 1) implemented MMIO/GTT/WP pages read/write logic; 2) used a unified
function to enter failsafe mode

Signed-off-by: Min He <min.he@intel.com>
Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: introduce intel_vgpu_reset_mmio() to reset mmio space

This patch introduces a new function intel_vgpu_reset_mmio() to
reset vGPU MMIO space (virtual registers of the vGPU). The default
values are loaded as firmware during gvt inititiation.

Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: move mmio init/clean function to mmio.c

Move the mmio space inititation function setup_vgpu_mmio()
and cleanup function clean_vgpu_mmio() in vgpu.c to dedicated
source file mmio.c, and rename them as intel_vgpu_init_mmio()
and intel_vgpu_clean_mmio() respectively.

Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: print correct value for untracked mmio

In function intel_vgpu_emulate_mmio_read, the untracked mmio register is
dumped through kernel log, but the register value is not correct. This
patch fixes this issue.

V2: fix the fromat warning from checkpatch.pl.

Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: refactor intel_gvt_io_emulation_ops to be intel_gvt_ops

There are currently 4 methods in intel_gvt_io_emulation_ops
to emulate CFG/MMIO reading/writing for intel vGPU. A possibly
better scope is: add 3 more methods for vgpu create/destroy/reset
respectively, and rename the ops to 'intel_gvt_ops', then pass
it to the MPT module (say the future kvmgt) to use: they are
all methods for external usage.

Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: clean up intel_gvt.h as interface for i915 core

i915 core should only call functions and structures exposed through
intel_gvt.h. Remove internal gvt.h and i915_pvinfo.h.

Change for internal intel_gvt structure as private handler which
not requires to expose gvt internal structure for i915 core.

v2: Fix per Chris's comment
- carefully handle dev_priv->gvt assignment
- add necessary bracket for macro helper
- forward declartion struct intel_gvt
- keep free operation within same file handling alloc

v3: fix use after free and remove intel_gvt.initialized

v4: change to_gvt() to an inline

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: vGPU MMIO virtualization

This patch introduces the generic vGPU MMIO emulation intercept
framework. The MPT modules will request GVT-g core logic to
emulate MMIO read/write through IO emulation operations
callback when hypervisor trapped a guest GTTMMIO read/write.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>