drm/i915/gvt: Make gvt_vgpu_err use pr_err

gvt_vgpu_err means something goes wrong. We need the error propagates to
kernel message by default.

Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Use dyndbg for gvt debug info

It's better enable/disable and classify gvt debug info dynamically.
This patch change it to dyndbg so can be dynamically enable/disable
each item. All gvt log can be enabled by,
$ echo 'file *gvt* +p' > /sys/kernel/debug/dynamic_debug/control

Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: replace the gvt_err with gvt_vgpu_err

gvt_err should be used only for the very few critical error message
during host i915 drvier initialization. This patch
1. removes the redundant gvt_err;
2. creates a new gvt_vgpu_err to show errors caused by vgpu;
3. replaces the most gvt_err with gvt_vgpu_err;
4. leaves very few gvt_err for dumping gvt error during host gvt
initialization.

v2. change name to gvt_vgpu_err and add vgpu id to the message. (Kevin)
add gpu id to gvt_vgpu_err. (Zhi)
v3. remove gpu id from gvt_vgpu_err caller. (Zhi)
v4. add vgpu check to the gvt_vgpu_err macro. (Zhiyuan)
v5. add comments for v3 and v4.
v6. split the big patch into two, with this patch only for checking
gvt_vgpu_err. (Zhenyu)
v7. rebase to staging branch
v8. rebase to fix branch

Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: vGPU command scanner

This patch introduces a command scanner to scan guest command buffers.

Signed-off-by: Yulei Zhang <yulei.zhang@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: vGPU context switch

As different VM may configure different render MMIOs when executing
workload, to schedule workloads between different VM, the render MMIOs
have to be switched.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: vGPU workload scheduler

This patch introduces the vGPU workload scheduler routines.

GVT workload scheduler is responsible for picking and executing GVT workload
from current scheduled vGPU. Before the workload is submitted to host i915,
the guest execlist context will be shadowed in the host GVT shadow context.
the instructions in guest ring buffer will be copied into GVT shadow ring
buffer. Then GVT-g workload scheduler will scan the instructions in guest
ring buffer and submit it to host i915.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: vGPU execlist virtualization

This patch introduces the vGPU execlist virtualization.

Under virtulization environment, HW execlist interface are fully emulated
including virtual CSB emulation, virtual execlist emulation. The framework
will emulate the virtual CSB according to the guest workload running status

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: vGPU display virtualization

This patch introduces the GVT-g display virtualization.

It consists a collection of display MMIO handlers, like power well register
handler, pipe register handler, plane register handler, which will emulate
all display MMIOs behavior to support virtual mode setting sequence for
guest.

Signed-off-by: Bing Niu <bing.niu@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: vGPU MMIO virtualization

This patch introduces the generic vGPU MMIO emulation intercept
framework. The MPT modules will request GVT-g core logic to
emulate MMIO read/write through IO emulation operations
callback when hypervisor trapped a guest GTTMMIO read/write.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: vGPU graphics memory virtualization

The vGPU graphics memory emulation framework is responsible for graphics
memory table virtualization. Under virtualization environment, a VM will
populate the page table entry with guest page frame number(GPFN/GFN), while
HW needs a page table filled with MFN(Machine frame number). The
relationship between GFN and MFN(Machine frame number) is managed by
hypervisor, while GEN HW doesn't have such knowledge to translate a GFN.

To solve this gap, shadow GGTT/PPGTT page table is introdcued.

For GGTT, the GFN inside the guest GGTT page table entry will be translated
into MFN and written into physical GTT MMIO registers when guest write
virtual GTT MMIO registers.

For PPGTT, a shadow PPGTT page table will be created and write-protected
translated from guest PPGTT page table. And the shadow page table root
pointers will be written into the shadow context after a guest workload
is shadowed.

vGPU graphics memory emulation framework consists:

- Per-GEN HW platform page table entry bits extract/de-extract routines.
- GTT MMIO register emulation handlers, which will call hypercall to do
GFN->MFN translation when guest write GTT MMIO register
- PPGTT shadow page table routines, e.g. shadow create/destroy/out-of-sync

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: vGPU interrupt virtualization.

This patch introduces vGPU interrupt emulation framework.

The vGPU intrerrupt emulation framework is an event-based interrupt
emulation framework. It's responsible for emulating GEN hardware interrupts
during emulating other HW behaviour.

It consists several components:

- Descriptions of interrupt register bit
- Upper level <-> lower level interrupt mapping
- GEN HW IER/IMR/IIR register emulation routines
- Event-based interrupt propagation interface

When a GVT-g component wants to inject an interrupt to a VM during a
emulation, first it should specify the event needs to be emulated and the
framework will deal with the rest of emulation:

- Generating related virtual IIR bit according to virtual IER and IMRs,
- Generate related virtual upper level virtual IIR bit accodring to the
per-platform interrupt mapping
- Injecting a MSI to VM

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: vGPU HW resource management

This patch introduces the GVT-g vGPU HW resource management. Under
GVT-g virtualizaion environment, each vGPU requires portions HW
resources, including aperture, hidden GM space, and fence registers.

When creating a vGPU, GVT-g will request these HW resources from host,
and return them to host after a vGPU is destroyed.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915: gvt: Introduce the basic architecture of GVT-g

This patch introduces the very basic framework of GVT-g device model,
includes basic prototypes, definitions, initialization.

v12:
- Call intel_gvt_init() in driver early initialization stage. (Chris)

v8:
- Remove the GVT idr and mutex in intel_gvt_host. (Joonas)

v7:
- Refine the URL link in Kconfig. (Joonas)
- Refine the introduction of GVT-g host support in Kconfig. (Joonas)
- Remove the macro GVT_ALIGN(), use round_down() instead. (Joonas)
- Make "struct intel_gvt" a data member in struct drm_i915_private.(Joonas)
- Remove {alloc, free}_gvt_device()
- Rename intel_gvt_{create, destroy}_gvt_device()
- Expost intel_gvt_init_host()
- Remove the dummy "struct intel_gvt" declaration in intel_gvt.h (Joonas)

v6:
- Refine introduction in Kconfig. (Chris)
- The exposed API functions will take struct intel_gvt * instead of
void *. (Chris/Tvrtko)
- Remove most memebers of strct intel_gvt_device_info. Will add them
in the device model patches.(Chris)
- Remove gvt_info() and gvt_err() in debug.h. (Chris)
- Move GVT kernel parameter into i915_params. (Chris)
- Remove include/drm/i915_gvt.h, as GVT-g will be built within i915.
- Remove the redundant struct i915_gvt *, as the functions in i915
will directly take struct intel_gvt *.
- Add more comments for reviewer.

v5:
Take Tvrtko's comments:
- Fix the misspelled words in Kconfig
- Let functions take drm_i915_private * instead of struct drm_device *
- Remove redundant prints/local varible initialization

v3:
Take Joonas' comments:
- Change file name i915_gvt.* to intel_gvt.*
- Move GVT kernel parameter into intel_gvt.c
- Remove redundant debug macros
- Change error handling style
- Add introductions for some stub functions
- Introduce drm/i915_gvt.h.

Take Kevin's comments:
- Move GVT-g host/guest check into intel_vgt_balloon in i915_gem_gtt.c

v2:
- Introduce i915_gvt.c.
It's necessary to introduce the stubs between i915 driver and GVT-g host,
as GVT-g components is configurable in kernel config. When disabled, the
stubs here do nothing.

Take Joonas' comments:
- Replace boolean return value with int.
- Replace customized info/warn/debug macros with DRM macros.
- Document all non-static functions like i915.
- Remove empty and unused functions.
- Replace magic number with marcos.
- Set GVT-g in kernel config to "n" by default.

Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466078825-6662-5-git-send-email-zhi.a.wang@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>