#
c9517783 |
|
16-Aug-2023 |
Matt Roper <matthew.d.roper@intel.com> |
drm/i915/dg2: Drop Wa_16011777198 Wa_16011777198 only applies to pre-production steppings of DG2, which we're no longer supporting. Remove the workaround and override_gucrc handling, which is no longer needed. Since this was the final use of IS_DG2_GRAPHICS_STEP, that macro can also be removed now. v2: - Include the promised removal of override_gucrc handling. Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230816214824.548575-2-matthew.d.roper@intel.com
|
#
55f9720d |
|
25-Apr-2023 |
Vinay Belgaumkar <vinay.belgaumkar@intel.com> |
drm/i915/guc/slpc: Provide sysfs for efficient freq SLPC enables use of efficient freq at init by default. It is possible for GuC to request frequencies that are higher than the 'software' max if user has set it lower than the efficient level. Scenarios/tests that require strict fixing of freq below the efficient level will need to disable it through this interface. v2: Keep just one interface to toggle sysfs. With this, user will be completely responsible for toggling efficient frequency if need be. There will be no implicit disabling when user sets min < RP1 (Ashutosh) v3: Remove unused label, review comments (Ashutosh) v4: Toggle efficient freq usage in SLPC selftest and checkpatch fixes v5: Review comments (Andi) and add a separate patch for selftest updates Fixes: 95ccf312a1e4 ("drm/i915/guc/slpc: Allow SLPC to use efficient frequency") Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230426003942.1924347-1-vinay.belgaumkar@intel.com
|
#
01e74274 |
|
26-Oct-2022 |
Vinay Belgaumkar <vinay.belgaumkar@intel.com> |
drm/i915/guc: Support OA when Wa_16011777198 is enabled On DG2, a w/a resets RCS/CCS before it goes into RC6. This breaks OA since OA does not expect engine resets during its use. Fix it by disabling RC6. v2: (Ashutosh) - Bring back slpc_unset_param helper - Update commit msg - Use with_intel_runtime_pm helper for set/unset v3: (Ashutosh) - Just use intel_uc_uses_guc_rc Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026222102.5526-15-umesh.nerlige.ramappa@intel.com
|
#
37d52e44 |
|
24-Oct-2022 |
Vinay Belgaumkar <vinay.belgaumkar@intel.com> |
drm/i915/slpc: Use platform limits for min/max frequency GuC will set the min/max frequencies to theoretical max on ATS-M. This will break kernel ABI, so limit min/max frequency to RP0(platform max) instead. Also modify the SLPC selftest to update the min frequency when we have a server part so that we can iterate between platform min and max. v2: Check softlimits instead of platform limits (Riana) v3: More review comments (Ashutosh) v4: No need to use saved_min_freq and other comments (Ashutosh) Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/7030 Acked-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Riana Tauro <riana.tauro@intel.com> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221024225453.4856-1-vinay.belgaumkar@intel.com
|
#
26be7cd8 |
|
25-May-2022 |
Ashutosh Dixit <ashutosh.dixit@intel.com> |
drm/i915/gt: Add media freq factor to per-gt sysfs Expose new sysfs to program and retrieve media freq factor. Factor values of 0 (dynamic), 0.5 and 1.0 are supported via a u8.8 fixed point representation (corresponding to integer values of 0, 128 and 256 respectively). Media freq factor is converted to media_ratio_mode for GuC. It is programmed into GuC using H2G SLPC interface. It is retrieved from GuC through a register read. A cached media_ratio_mode is maintained to preserve set values across GuC resets. This patch adds the following sysfs files to gt/gtN sysfs: * media_freq_factor * media_freq_factor.scale v2: Minor wording change in drm_warn (Tvrtko) Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7ad7578335d8af9cba047b4bcf33d1887453d2e1.1653484574.git.ashutosh.dixit@intel.com
|
#
1448d5c4 |
|
01-Nov-2021 |
Vinay Belgaumkar <vinay.belgaumkar@intel.com> |
drm/i915/guc/slpc: Update boost sysfs hooks for SLPC Add a helper to sort through the SLPC/RPS paths of get/set methods. Boost frequency will be modified as long as it is within the constraints of RP0 and if it is different from the existing one. We will set min freq to boost only if there is at least one active waiter. v2: Add num_boosts to guc_slpc_info and changes for worker function v3: Review comments (Ashutosh) Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211102012608.8609-4-vinay.belgaumkar@intel.com
|
#
493043fe |
|
01-Nov-2021 |
Vinay Belgaumkar <vinay.belgaumkar@intel.com> |
drm/i915/guc/slpc: Add waitboost functionality for SLPC Add helper in RPS code for handling SLPC and non-SLPC paths. When boost is requested in the SLPC path, we can ask GuC to ramp up the frequency req by setting the minimum frequency to boost freq. Reset freq back to the min softlimit when there are no more waiters. v2: Schedule a worker thread which can boost freq from within an interrupt context as well. v3: No need to check against requested freq before scheduling boost work (Ashutosh) Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211102012608.8609-3-vinay.belgaumkar@intel.com
|
#
292e4fb0 |
|
01-Nov-2021 |
Vinay Belgaumkar <vinay.belgaumkar@intel.com> |
drm/i915/guc/slpc: Define and initialize boost frequency Define helpers and struct members required to record boost info. Boost frequency is initialized to RP0 at SLPC init. Also define num_waiters which can track the pending boost requests. Boost will be done by scheduling a worker thread. This will avoid the need to make H2G calls inside an interrupt context. Initialize the worker function during SLPC init as well. Had to move intel_guc_slpc_init a few lines below to accommodate this. v2: Add a workqueue to handle waitboost v3: Code review comments (Ashutosh) Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211102012608.8609-2-vinay.belgaumkar@intel.com
|
#
899a0fd7 |
|
30-Jul-2021 |
Vinay Belgaumkar <vinay.belgaumkar@intel.com> |
drm/i915/guc/slpc: Enable ARAT timer interrupt This interrupt is enabled during RPS initialization, and now needs to be done by SLPC code. It allows ARAT timer expiry interrupts to get forwarded to GuC. v2: Fix comment (Matthew Brost) v3: checkpatch() Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-11-vinay.belgaumkar@intel.com
|
#
f1928ac2 |
|
30-Jul-2021 |
Vinay Belgaumkar <vinay.belgaumkar@intel.com> |
drm/i915/guc/slpc: Add debugfs for SLPC info This prints out relevant SLPC info from the SLPC shared structure. We will send a H2G message which forces SLPC to update the shared data structure with latest information before reading it. v2: Address review comments (Michal W) v3: Remove unnecessary tasks from slpc_info (Michal W) v4: Rename function to intel_guc_slpc_print_info() (Michal W) v5: checkpatch() Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-10-vinay.belgaumkar@intel.com
|
#
c279bec1 |
|
30-Jul-2021 |
Vinay Belgaumkar <vinay.belgaumkar@intel.com> |
drm/i915/guc/slpc: Add get max/min freq hooks Add helpers to read the min/max frequency being used by SLPC. This is done by send a H2G command which forces SLPC to update the shared data struct which can then be read. These helpers will be used in a sysfs patch later on. v2: Address review comments (Michal W) v3: Return err in case of query failure (Michal W) v4: Move decode_min/max_freq to this patch Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-9-vinay.belgaumkar@intel.com
|
#
d41f6f82 |
|
30-Jul-2021 |
Vinay Belgaumkar <vinay.belgaumkar@intel.com> |
drm/i915/guc/slpc: Add methods to set min/max frequency Add param set h2g helpers to set the min and max frequencies for use by SLPC. v2: Address review comments (Michal W) v3: Check for positive error code (Michal W) v4: Print generic error in set_param (Michal W) Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-8-vinay.belgaumkar@intel.com
|
#
dff0fc49 |
|
30-Jul-2021 |
Vinay Belgaumkar <vinay.belgaumkar@intel.com> |
drm/i915/guc/slpc: Initial definitions for SLPC Add macros to check for SLPC support. This feature is currently supported for Gen12+ and enabled whenever GuC submission is enabled/selected. Include templates for SLPC init/fini and enable. v2: Move SLPC helper functions to intel_guc_slpc.c/.h. Define basic template for SLPC structure in intel_guc_slpc_types.h. Fix copyright (Michal W) v3: Review comments (Michal W) v4: Include supported/selected inside slpc struct (Michal W) Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-2-vinay.belgaumkar@intel.com
|