drm/i915/selftests: Increasing the sleep time for live_rc6_manual

Sometimes gt_pm live_rc6_manual selftest fails due to no power being
measured for the rc6 disabled period. Therefore increasing the rc6 disable
period from 250ms to 1000ms to rule out such sporadic failure.

v3:
- More descriptive and improved commit message (Anshuman)

Signed-off-by: Anirban Sk <sk.anirban@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212050738.1162198-1-sk.anirban@intel.com

drm/i915: use direct alias for i915 in requests

i915_request contains direct alias to i915, there is no point to go via
rq->engine->i915.

v2: added missing rq.i915 initialization in measure_breadcrumb_dw.

Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230720113002.1541572-1-andrzej.hajda@intel.com

drm/i915/gt: Use RC6 residency types as arguments to residency functions

Previously RC6 residency functions directly accepted RC6 residency register
MMIO offsets (there are four RC6 residency registers). This worked but
required an assumption on the residency register layout so was not future
proof.

Therefore change RC6 residency functions to accept RC6 residency types
instead of register MMIO offsets. The knowledge of register offsets as well
as ID to offset mapping is now maintained solely in intel_rc6 and can be
tailored for different platforms and different register layouts as need
arises.

v2: Address review comments by Jani N
- Change residency functions to accept RC6 residency types instead of
register ID's
- s/intel_rc6_print_rc5_res/intel_rc6_print_residency/
- Remove "const enum" in function arguments
- Naming: intel_rc6_* for enum
- Use INTEL_RC6_RES_MAX and other minor changes
v3: Don't include intel_rc6_types.h in intel_rc6.h (Jani)

Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Reported-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221114123348.3474216-5-badal.nilawar@intel.com

drm/i915/gt: replace IS_GEN and friends with GRAPHICS_VER

This was done by the following semantic patch:

@@ expression i915; @@
- INTEL_GEN(i915)
+ GRAPHICS_VER(i915)

@@ expression i915; expression E; @@
- INTEL_GEN(i915) >= E
+ GRAPHICS_VER(i915) >= E

@@ expression dev_priv; expression E; @@
- !IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) != E

@@ expression dev_priv; expression E; @@
- IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) == E

@@
expression dev_priv;
expression from, until;
@@
- IS_GEN_RANGE(dev_priv, from, until)
+ IS_GRAPHICS_VER(dev_priv, from, until)

@def@
expression E;
identifier id =~ "^gen$";
@@
- id = GRAPHICS_VER(E)
+ ver = GRAPHICS_VER(E)

@@
identifier def.id;
@@
- id
+ ver

It also takes care of renaming the variable we assign to GRAPHICS_VER()
so to use "ver" rather than "gen".

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210605155356.4183026-2-lucas.demarchi@intel.com

drm/i915/selftests: Only query RAPL for integrated power measurements

RAPL provides an on-package power measurements which does not encompass
discrete graphics, so let's avoid using the igfx masurements when testing
dgfx. Later we will abstract the simple librapl interface over hwmon so
that we can verify basic power consumption scenarios.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210412090526.30547-3-matthew.auld@intel.com

drm/i915/gt: SPDX cleanup

Clean up the SPDX licence declarations to comply with checkpatch.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122192913.4518-1-chris@chris-wilson.co.uk
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915/gt: Move gen8 CS emitters into gen8_engine_cs.h

Reduce the pollution of intel_engine.h by moving gen8_emit_pipe_control
and friends to gen8_engine_cs.h

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201216135452.6063-1-chris@chris-wilson.co.uk

drm/i915: Print caller when tainting for CI

We can add taint from multiple places, printing the caller allows us to
have a better overview of what exactly caused us to do the tainting.

v2: Tweak format and print the device (Chris)
v3: Move things around (Chris)

Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Petri Latvala <petri.latvala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200706144107.204821-2-michal@hardline.pl

drm/i915: Drop i915_request.i915 backpointer

We infrequently use the direct i915 backpointer from the i915_request,
so do we really need to waste the space in the struct for it? 8 bytes
from the most frequently allocated struct vs an 3 bytes and pointer
chasing in using rq->engine->i915?

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200602220953.21178-1-chris@chris-wilson.co.uk

drm/i915/selftests: Move gpu energy measurement into its own little lib

Move the handy utility to measure the GPU energy consumption using RAPL
msr into a common lib so that it can be reused easily.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417152018.13079-1-chris@chris-wilson.co.uk

drm/i915/gt: Select the deepest available parking mode for rc6

On Ivybridge, we can go lower than rc6 to rc6p. And this is required for
Ivybridge to hit the same minimum power consumption as rc6 on other
platforms, so make it so.

v2: Update selftest to include all rc6 residency counters

Note that Andi did mention that we should be converting the magic
numbers into opaque magic macros, so if they ever get reused (unlikely
given only Ivybridge used the extra modes) we'll need to pay back the
technical debt.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1518
Fixes: 730eaeb52426 ("drm/i915/gt: Manual rc6 entry upon parking")
Testcase: igt/i915_pm_rc6_residency/rc6-idle
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324134232.8773-1-chris@chris-wilson.co.uk
(cherry picked from commit 13c5a577b342d80ea06b7300ce69420a2d0928ca)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/selftests: Measure the energy consumed while in RC6

Measure and compare the energy consumed, as reported by the rapl MSR,
by the GPU while in RC0 and RC6 states. Throw an error if RC6 does not
at least halve the energy consumption of RC0, as this more than likely
means we failed to enter RC0 correctly.

If we can't measure the energy draw with the MSR, then it will report 0
for both measurements. Since the measurement works on all gen6+, this seems
worth flagging as an error.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200325101502.12591-1-chris@chris-wilson.co.uk

drm/i915/gt: Select the deepest available parking mode for rc6

On Ivybridge, we can go lower than rc6 to rc6p. And this is required for
Ivybridge to hit the same minimum power consumption as rc6 on other
platforms, so make it so.

v2: Update selftest to include all rc6 residency counters

Note that Andi did mention that we should be converting the magic
numbers into opaque magic macros, so if they ever get reused (unlikely
given only Ivybridge used the extra modes) we'll need to pay back the
technical debt.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1518
Fixes: 730eaeb52426 ("drm/i915/gt: Manual rc6 entry upon parking")
Testcase: igt/i915_pm_rc6_residency/rc6-idle
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324134232.8773-1-chris@chris-wilson.co.uk

drm/i915/selftests: Show the RC6 residency on parking failure

Include the current RC6 residency counter in the error message, so that
if we fail to park and manually enter RC6 we can see if the counter has
a particularly suspect value (such as 0).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123145755.1420622-1-chris@chris-wilson.co.uk

drm/i915: Remove i915->kernel_context

Allocate only an internal intel_context for the kernel_context, forgoing
a global GEM context for internal use as we only require a separate
address space (for our own protection).

Now having weaned GT from requiring ce->gem_context, we can stop
referencing it entirely. This also means we no longer have to create random
and unnecessary GEM contexts for internal use.

GEM contexts are now entirely for tracking GEM clients, and intel_context
the execution environment on the GPU.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191221160324.1073045-1-chris@chris-wilson.co.uk

drm/i915/gt: Manual rc6 entry upon parking

Now that we rapidly park the GT when the GPU idles, we often find
ourselves idling faster than the RC6 promotion timer. Thus if we tell
the GPU to enter RC6 manually as we park, we can do so quicker (by
around 50ms, half an EI on average) and marginally increase our
powersaving across all execlists platforms.

v2: Now with a selftest to check we can enter RC6 manually

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127095657.3209854-1-chris@chris-wilson.co.uk

drm/i915/selftests: Exercise rc6 w/a handling

Reading from CTX_INFO upsets rc6, requiring us to detect and prevent
possible rc6 context corruption. Poke at the bear!

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Tested-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191119154723.3311814-1-chris@chris-wilson.co.uk