drm/i915/uncore: add intel_uncore_regs() helper

Add a helper for accessing uncore->regs instead of doing it
directly. This will help display code reuse with the xe driver.

Cc: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230627095128.208071-1-jani.nikula@intel.com

drm/i915: add a dedicated workqueue inside drm_i915_private

In order to avoid flush_scheduled_work() usage, add a dedicated
workqueue in the drm_i915_private structure. In this way, we don't
need to use the system queue anymore.

This change is mostly mechanical and based on Tetsuo's original
patch[1].

v6 by Jani:
- Also create unordered_wq for mock device

Link: https://patchwork.freedesktop.org/series/114608/ [1]
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c816ebe17ef08d363981942a096a586a7658a65e.1686231190.git.jani.nikula@intel.com

drm/i915/pxp: Add MTL hw-plumbing enabling for KCR operation

Add MTL hw-plumbing enabling for KCR operation under PXP
which includes:

1. Updating 'pick-gt' to get the media tile for
KCR interrupt handling
2. Adding MTL's KCR registers for PXP operation
(init, status-checking, etc.).

While doing #2, lets create a separate registers header file for PXP
to be consistent with other i915 global subsystems.

Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-3-alan.previn.teres.alexis@intel.com

drm/i915/gsc: add support for GSC proxy interrupt

The GSC notifies us of a proxy request via the HECI2 interrupt. The
interrupt must be enabled both in the HECI layer and in our usual gt irq
programming; for the latter, the interrupt is enabled via the same enable
register as the GSC CS, but it does have its own mask register. When the
interrupt is received, we also need to de-assert it in both layers.

The handling of the proxy request is deferred to the same worker that we
use for GSC load. New flags have been added to distinguish between the
init case and the proxy interrupt.

v2: Make sure not to set the reset bit when enabling/disabling the GSC
interrupts, fix defines (Alan)

v3: rebase on proxy status register check

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230502163854.317653-5-daniele.ceraolospurio@intel.com

drm/i915: use explicit includes for i915_reg.h and i915_irq.h

A lot of places include i915_reg.h implicitly via i915_irq.h, which gets
included implicitly via intel_display_trace.h. Remove the includes from
the headers, and include i915_reg.h and i915_irq.h explicitly where
needed.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230419094243.366821-1-jani.nikula@intel.com

drm/i915/gt: Start adding module oriented dmesg output

When trying to analyse bug reports from CI, customers, etc. it can be
difficult to work out exactly what is happening on which GT in a
multi-GT system. So add GT oriented debug/error message wrappers. If
used instead of the drm_ equivalents, you get the same output but with
a GT# prefix on it.

v2: Go back to using lower case names (combined review feedback).
Convert intel_gt.c as a first step.
v3: Add gt_err_ratelimited() as well, undo one conversation that might
not have a GT pointer in some scenarios (review feedback from Michal W).
Split definitions into separate header (review feedback from Jani).
Convert all intel_gt*.c files.
v4: Re-order some macro definitions (Andi S), update (c) date (Tvrtko)

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230111200429.2139084-2-John.C.Harrison@Intel.com

drm/i915/pxp: Promote pxp subsystem to top-level of i915

Starting with MTL, there will be two GT-tiles, a render and media
tile. PXP as a service for supporting workloads with protected
contexts and protected buffers can be subscribed by process
workloads on any tile. However, depending on the platform,
only one of the tiles is used for control events pertaining to PXP
operation (such as creating the arbitration session and session
tear-down).

PXP as a global feature is accessible via batch buffer instructions
on any engine/tile and the coherency across tiles is handled implicitly
by the HW. In fact, for the foreseeable future, we are expecting this
single-control-tile for the PXP subsystem.

In MTL, it's the standalone media tile (not the root tile) because
it contains the VDBOX and KCR engine (among the assets PXP relies on
for those events).

Looking at the current code design, each tile is represented by the
intel_gt structure while the intel_pxp structure currently hangs off the
intel_gt structure.

Keeping the intel_pxp structure within the intel_gt structure makes some
internal functionalities more straight forward but adds code complexity to
code readability and maintainibility to many external-to-pxp subsystems
which may need to pick the correct intel_gt structure. An example of this
would be the intel_pxp_is_active or intel_pxp_is_enabled functionality
which should be viewed as a global level inquiry, not a per-gt inquiry.

That said, this series promotes the intel_pxp structure into the
drm_i915_private structure making it a top-level subsystem and the PXP
subsystem will select the control gt internally and keep a pointer to
it for internal reference.

This promotion comes with two noteworthy changes:

1. Exported pxp functions that are called by external subsystems
(such as intel_pxp_enabled/active) will have to check implicitly
if i915->pxp is valid as that structure will not be allocated
for HW that doesn't support PXP.

2. Since GT is now considered a soft-dependency of PXP we are
ensuring that GT init happens before PXP init and vice versa
for fini. This causes a minor ordering change whereby we previously
called intel_pxp_suspend after intel_uc_suspend but now is before
i915_gem_suspend_late but the change is required for correct
dependency flows. Additionally, this re-order change doesn't
have any impact because at that point in either case, the top level
entry to i915 won't observe any PXP events (since the GPU was
quiesced during suspend_prepare). Also, any PXP event doesn't
really matter when we disable the PXP HW (global GT irqs are
already off anyway, so even if there was a bug that generated
spurious events we wouldn't see it and we would just clean it
up on resume which is okay since the default fallback action
for PXP would be to keep the sessions off at this suspend stage).

Changes from prior revs:
v11: - Reformat a comment (Tvrtko).
v10: - Change the code flow for intel_pxp_init to make it more
cleaner and readible with better comments explaining the
difference between full-PXP-feature vs the partial-teelink
inits depending on the platform. Additionally, only do
the pxp allocation when we are certain the subsystem is
needed. (Tvrtko).
v9: - Cosmetic cleanups in supported/enabled/active. (Daniele).
- Add comments for intel_pxp_init and pxp_get_ctrl_gt that
explain the functional flow for when PXP is not supported
but the backend-assets are needed for HuC authentication
(Daniele and Tvrtko).
- Fix two remaining functions that are accessible outside
PXP that need to be checking pxp ptrs before using them:
intel_pxp_irq_handler and intel_pxp_huc_load_and_auth
(Tvrtko and Daniele).
- User helper macro in pxp-debugfs (Tvrtko).
v8: - Remove pxp_to_gt macro (Daniele).
- Fix a bug in pxp_get_ctrl_gt for the case of MTL and we don't
support GSC-FW on it. (Daniele).
- Leave i915->pxp as NULL if we dont support PXP and in line
with that, do additional validity check on i915->pxp for
intel_pxp_is_supported/enabled/active (Daniele).
- Remove unncessary include header from intel_gt_debugfs.c
and check drm_minor i915->drm.primary (Daniele).
- Other cosmetics / minor issues / more comments on suspend
flow order change (Daniele).
v7: - Drop i915_dev_to_pxp and in intel_pxp_init use 'i915->pxp'
through out instead of local variable newpxp. (Rodrigo)
- In the case intel_pxp_fini is called during driver unload but
after i915 loading failed without pxp being allocated, check
i915->pxp before referencing it. (Alan)
v6: - Remove HAS_PXP macro and replace it with intel_pxp_is_supported
because : [1] introduction of 'ctrl_gt' means we correct this
for MTL's upcoming series now. [2] Also, this has little impact
globally as its only used by PXP-internal callers at the moment.
- Change intel_pxp_init/fini to take in i915 as its input to avoid
ptr-to-ptr in init/fini calls.(Jani).
- Remove the backpointer from pxp->i915 since we can use
pxp->ctrl_gt->i915 if we need it. (Rodrigo).
v5: - Switch from series to single patch (Rodrigo).
- change function name from pxp_get_kcr_owner_gt to
pxp_get_ctrl_gt.
- Fix CI BAT failure by removing redundant call to intel_pxp_fini
from driver-remove.
- NOTE: remaining open still persists on using ptr-to-ptr
and back-ptr.
v4: - Instead of maintaining intel_pxp as an intel_gt structure member
and creating a number of convoluted helpers that takes in i915 as
input and redirects to the correct intel_gt or takes any intel_gt
and internally replaces with the correct intel_gt, promote it to
be a top-level i915 structure.
v3: - Rename gt level helper functions to "intel_pxp_is_enabled/
supported/ active_on_gt" (Daniele)
- Upgrade _gt_supports_pxp to replace what was intel_gtpxp_is
supported as the new intel_pxp_is_supported_on_gt to check for
PXP feature support vs the tee support for huc authentication.
Fix pxp-debugfs-registration to use only the former to decide
support. (Daniele)
- Couple minor optimizations.
v2: - Avoid introduction of new device info or gt variables and use
existing checks / macros to differentiate the correct GT->PXP
control ownership (Daniele Ceraolo Spurio)
- Don't reuse the updated global-checkers for per-GT callers (such
as other files within PXP) to avoid unnecessary GT-reparsing,
expose a replacement helper like the prior ones. (Daniele).
v1: - Add one more patch to the series for the intel_pxp suspend/resume
for similar refactoring

References: https://patchwork.freedesktop.org/patch/msgid/20221202011407.4068371-1-alan.previn.teres.alexis@intel.com
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221208180542.998148-1-alan.previn.teres.alexis@intel.com

drm/i915/guc: handle interrupts from media GuC

The render and media GuCs share the same interrupt enable register, so
we can no longer disable interrupts when we disable communication for
one of the GuCs as this would impact the other GuC. Instead, we keep the
interrupts always enabled in HW and use a variable in the GuC structure
to determine if we want to service the received interrupts or not.

v2: use MTL_ prefix for reg definition (Matt)

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108020600.3575467-7-daniele.ceraolospurio@intel.com

drm/i915: Partial abandonment of legacy DRM logging macros

Convert some usages of legacy DRM logging macros into versions which tell
us on which device have the events occurred.

v2:
* Don't have struct drm_device as local. (Jani, Ville)

v3:
* Store gt, not i915, in workaround list. (John)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221109104633.2579245-1-tvrtko.ursulin@linux.intel.com

drm/i915/mtl: add GSC CS interrupt support

The GSC CS re-uses the same interrupt bits that the GSC used in older
platforms. This means that we can now have an engine interrupt coming
out of OTHER_CLASS, so we need to handle that appropriately.

v2: clean up the if statement for the engine irq (Tvrtko)

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221102171047.2787951-4-daniele.ceraolospurio@intel.com

drm/i915/mtl: Hook up interrupts for standalone media

Top-level handling of standalone media interrupts will be processed as
part of the primary GT's interrupt handler (since primary and media GTs
share an MMIO space, unlike remote tile setups). When we get down to
the point of handling engine interrupts, we need to take care to lookup
VCS and VECS engines in the media GT rather than the primary.

There are also a couple of additional "other" instance bits that
correspond to the media GT's GuC and media GT's power management
interrupts; we need to direct those to the media GT instance as well.

Bspec: 45605
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906234934.3655440-15-matthew.d.roper@intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/mtl: Use primary GT's irq lock for media GT

When we hook up interrupts (in the next patch), interrupts for the media
GT are still processed as part of the primary GT's interrupt flow. As
such, we should share the same IRQ lock with the primary GT. Let's
convert gt->irq_lock into a pointer and just point the media GT's
instance at the same lock the primary GT is using.

v2:
- Point media's gt->irq_lock at the primary GT lock properly. (Daniele)
- Fix jump target for intel_root_gt_init_early errors. (Daniele)

Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906234934.3655440-14-matthew.d.roper@intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/pvc: Interrupt support for new copy engines

Add the interrupt handler support for new copy engines.

Bspec: 54030
Original-author: CQ Tang
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505213812.3979301-10-matthew.d.roper@intel.com

drm/i915/gsc: add gsc as a mei auxiliary device

GSC is a graphics system controller, it provides
a chassis controller for graphics discrete cards.

There are two MEI interfaces in GSC: HECI1 and HECI2.

Both interfaces are on the BAR0 at offsets 0x00258000 and 0x00259000.
GSC is a GT Engine (class 4: instance 6). HECI1 interrupt is signaled
via bit 15 and HECI2 via bit 14 in the interrupt register.

This patch exports GSC as auxiliary device for mei driver to bind to
for HECI2 interface and prepares for HECI1 interface as
it will follow up soon.

CC: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220419193314.526966-2-daniele.ceraolospurio@intel.com

drm/i915/xehp: Add Compute CS IRQ handlers

Add execlists and GuC interrupts for compute CS into existing IRQ handlers.

All compute command streamers belong to the same compute class, so the
only change needed to enable their interrupts is to program their GT engine
interrupt mask registers.

CCS0 shares the register with CCS1, while CCS2 and CCS3 are in a new one.

BSpec: 50844, 54029, 54030, 53223, 53224.
Original-author: Michel Thierry
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-4-matthew.d.roper@intel.com

drm/i915: Move GT registers to their own header file

This is a huge, chaotic mass of registers copied over as-is without any
real cleanup. We'll come back and organize these better, align on
consistent coding style, remove dead code, etc. in separate patches
later that will be easier to review.

v2:
- Add missing include in intel_pxp_irq.c
v3:
- Correct a few indentation errors (Lucas)
- Minor conflict resolution

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-6-matthew.d.roper@intel.com

drm/i915/pxp: Implement PXP irq handler

The HW will generate a teardown interrupt when session termination is
required, which requires i915 to submit a terminating batch. Once the HW
is done with the termination it will generate another interrupt, at
which point it is safe to re-create the session.

Since the termination and re-creation flow is something we want to
trigger from the driver as well, use a common work function that can be
called both from the irq handler and from the driver set-up flows, which
has the addded benefit of allowing us to skip any extra locks because
the work itself serializes the operations.

v2: use struct completion instead of bool (Chris)
v3: drop locks, clean up functions and improve comments (Chris),
move to common work function.
v4: improve comments, simplify wait logic (Rodrigo)
v5: unconditionally set interrupts, rename state_attacked var (Rodrigo)
v10: remove inclusion of intel_gt_types.h from intel_pxp.h (Jani)

Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Huang, Sean Z <sean.z.huang@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924191452.1539378-10-alan.previn.teres.alexis@intel.com

drm/i915/xehp: Extra media engines - Part 2 (interrupts)

Xe_HP can have a lot of extra media engines. This patch adds the
interrupt handler support for them.

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723174239.1551352-4-matthew.d.roper@intel.com

drm/i915/gt: replace IS_GEN and friends with GRAPHICS_VER

This was done by the following semantic patch:

@@ expression i915; @@
- INTEL_GEN(i915)
+ GRAPHICS_VER(i915)

@@ expression i915; expression E; @@
- INTEL_GEN(i915) >= E
+ GRAPHICS_VER(i915) >= E

@@ expression dev_priv; expression E; @@
- !IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) != E

@@ expression dev_priv; expression E; @@
- IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) == E

@@
expression dev_priv;
expression from, until;
@@
- IS_GEN_RANGE(dev_priv, from, until)
+ IS_GRAPHICS_VER(dev_priv, from, until)

@def@
expression E;
identifier id =~ "^gen$";
@@
- id = GRAPHICS_VER(E)
+ ver = GRAPHICS_VER(E)

@@
identifier def.id;
@@
- id
+ ver

It also takes care of renaming the variable we assign to GRAPHICS_VER()
so to use "ver" rather than "gen".

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210605155356.4183026-2-lucas.demarchi@intel.com

drm/i915/guc: enable only the user interrupt when using GuC submission

In GuC submission mode the CS is owned by the GuC FW, so all CS status
interrupts are handled by it. We only need the user interrupt as that
signals request completion.

Since we're now starting the engines directly in GuC submission mode
when selected, we can stop switching back and forth between the
execlists and the GuC programming and select directly the correct
interrupt mask.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603051630.2635-4-matthew.brost@intel.com

drm/i915/gt: Move CS interrupt handler to the backend

The different submission backends each have their own preferred
behaviour and interrupt setup. Let each handle their own interrupts.

This becomes more useful later as we to extract the use of auxiliary
state in the interrupt handler that is backend specific.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210521183215.65451-4-matthew.brost@intel.com

drm/i915/gt: SPDX cleanup

Clean up the SPDX licence declarations to comply with checkpatch.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122192913.4518-1-chris@chris-wilson.co.uk
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915/gt: Move move context layout registers and offsets to lrc_reg.h

Cleanup intel_lrc.h by moving some of the residual common register
definitions into intel_lrc_reg.h, prior to rebranding and splitting off
the submission backends.

v2: keep the SCHEDULE enum in the old file, since it is specific to the
gvt usage of the execlists submission backend (John)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> #v2
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201209233618.4287-1-chris@chris-wilson.co.uk

drm/i915/gt: Distinguish the virtual breadcrumbs from the irq breadcrumbs

On the virtual engines, we only use the intel_breadcrumbs for tracking
signaling of stale breadcrumbs from the irq_workers. They do not have
any associated interrupt handling, active requests are passed to a
physical engine and associated breadcrumb interrupt handler. This causes
issues for us as we need to ensure that we do not actually try and
enable interrupts and the powermanagement required for them on the
virtual engine, as they will never be disabled. Instead, let's
specify the physical engine used for interrupt handler on a particular
breadcrumb.

v2: Drop b->irq_armed = true mocking for no interrupt HW

Fixes: 4fe6abb8f513 ("drm/i915/gt: Ignore irq enabling on the virtual engines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731154834.8378-4-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/gt: Be defensive in the face of false CS events

If the HW throws a curve ball and reports either en event before it is
possible, or just a completely impossible event, we have to grin and
bear it. The first few events, we will likely not notice as we would be
expecting some event, but as soon as we stop expecting an event and yet
they still keep coming, then we enter into undefined state territory.
In which case, bail out, stop processing the events, and reset the
engine and our set of queued requests to recover.

The sporadic hangs and warnings will continue to plague CI, but at least
system stability should not be compromised.

v2: Commentary and force the reset-on-error.
v3: Customised user facing message for forced resets from internal errors.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2045
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200710133125.30194-1-chris@chris-wilson.co.uk

drm/i915: Use the gt in HAS_ENGINE

A follow up patch will move the engine mask under the gt structure,
so get ready for that.

v2: switch the remaining gvt case using dev_priv->gt to gvt->gt (Chris)

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708003952.21831-3-daniele.ceraolospurio@intel.com

drm/i915/gt: Yield the timeslice if caught waiting on a user semaphore

If we find ourselves waiting on a MI_SEMAPHORE_WAIT, either within the
user batch or in our own preamble, the engine raises a
GT_WAIT_ON_SEMAPHORE interrupt. We can unmask that interrupt and so
respond to a semaphore wait by yielding the timeslice, if we have
another context to yield to!

The only real complication is that the interrupt is only generated for
the start of the semaphore wait, and is asynchronous to our
process_csb() -- that is, we may not have registered the timeslice before
we see the interrupt. To ensure we don't miss a potential semaphore
blocking forward progress (e.g. selftests/live_timeslice_preempt) we mark
the interrupt and apply it to the next timeslice regardless of whether it
was active at the time.

v2: We use semaphores in preempt-to-busy, within the timeslicing
implementation itself! Ergo, when we do insert a preemption due to an
expired timeslice, the new context may start with the missed semaphore
flagged by the retired context and be yielded, ad infinitum. To avoid
this, read the context id at the time of the semaphore interrupt and
only yield if that context is still active.

Fixes: 8ee36e048c98 ("drm/i915/execlists: Minimalistic timeslicing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200407130811.17321-1-chris@chris-wilson.co.uk
(cherry picked from commit c4e8ba7390346a77ffe33ec3f210bc62e0b6c8c6)
(cherry picked from commit cd60e4ac4738a6921592c4f7baf87f9a3499f0e2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/gt: Yield the timeslice if caught waiting on a user semaphore

If we find ourselves waiting on a MI_SEMAPHORE_WAIT, either within the
user batch or in our own preamble, the engine raises a
GT_WAIT_ON_SEMAPHORE interrupt. We can unmask that interrupt and so
respond to a semaphore wait by yielding the timeslice, if we have
another context to yield to!

The only real complication is that the interrupt is only generated for
the start of the semaphore wait, and is asynchronous to our
process_csb() -- that is, we may not have registered the timeslice before
we see the interrupt. To ensure we don't miss a potential semaphore
blocking forward progress (e.g. selftests/live_timeslice_preempt) we mark
the interrupt and apply it to the next timeslice regardless of whether it
was active at the time.

v2: We use semaphores in preempt-to-busy, within the timeslicing
implementation itself! Ergo, when we do insert a preemption due to an
expired timeslice, the new context may start with the missed semaphore
flagged by the retired context and be yielded, ad infinitum. To avoid
this, read the context id at the time of the semaphore interrupt and
only yield if that context is still active.

Fixes: 8ee36e048c98 ("drm/i915/execlists: Minimalistic timeslicing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200407130811.17321-1-chris@chris-wilson.co.uk

drm/i915/gt: Hook up CS_MASTER_ERROR_INTERRUPT

Now that we have offline error capture and can reset an engine from
inside an atomic context while also preserving the GPU state for
post-mortem analysis, it is time to handle error interrupts thrown by
the command parser.

This provides a much, much faster mechanism for us to detect known
problems than using heartbeats/hangchecks, and also provides a mechanism
for when those are disabled. However, it is limited to problems the HW
can detect in the CS and so not a complete solution for detecting lockups.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128204318.4182039-2-chris@chris-wilson.co.uk

drm/i915/gt: Tidy repetition in declaring gen8+ interrupts

We use the same interrupt mask for each engine, so define it once in a
local and reuse.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200127231540.3302516-3-chris@chris-wilson.co.uk

drm/i915/gt: Reorganise gen8+ interrupt handler

We always use a deferred bottom-half (either tasklet or irq_work) for
processing the response to an interrupt which means we can recombine the
GT irq ack+handler into one. This simplicity is important in later
patches as we will need to handle and then ack multiple interrupt levels
before acking the GT and master interrupts.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200127231540.3302516-2-chris@chris-wilson.co.uk

drm/i915/gt: Remove direct invocation of breadcrumb signaling

Only signal the breadcrumbs from inside the irq_work, simplifying our
interface and calling conventions. The micro-optimisation here is that
by always using the irq_work interface, we know we are always inside an
irq-off critical section for the breadcrumb signaling and can ellide
save/restore of the irq flags.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217095642.3124521-7-chris@chris-wilson.co.uk

drm/i915/gt: Defer breadcrumb processing to after the irq handler

The design of our interrupt handlers is that we ack the receipt of the
interrupt first, inside the critical section where the master interrupt
control is off and other cpus cannot start processing the next
interrupt; and then process the interrupt events afterwards. However,
Icelake introduced a whole new set of banked GT_IIR that are inherently
serialised and slow to retrieve the IIR and must be processed within the
critical section. We can still push our breadcrumbs out of this critical
section by using our irq_worker. On bdw+, this should not make too much
of a difference as we only slightly defer the breadcrumbs, but on icl+
this should make a big difference to our throughput of interrupts from
concurrently executing engines.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127115813.3345823-1-chris@chris-wilson.co.uk

drm/i915: Extract GT render power state management

i915_irq.c is large. One reason for this is that has a large chunk of
the GT render power management stashed away in it. Extract that logic
out of i915_irq.c and intel_pm.c and put it under one roof.

Based on a patch by Chris Wilson.

Signed-off-by: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191024211642.7688-1-chris@chris-wilson.co.uk

drm/i915: Extract general GT interrupt handlers

i915_irq.c is large. It serves as the central dispatch and handler for
all of our device interrupts. Lets break it up by pulling out the GT
interrupt handlers.

Based on a patch by Chris Wilson.

Signed-off-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190811210633.18417-1-chris@chris-wilson.co.uk