drm/i915: Add helper function for getting number of VDSC engines

Currently we are using dsc_split and bigjoiner variables for determining
amount of VDSC instances, however that might change in future, if we happen
to have more of those.
So lets pack all that logic into single function for convenience, so that
at least this isn't hardcoded throughout the whole VDSC code.

v2: - s/u8/int/ (Jani Nikula)

Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230704131758.14024-2-stanislav.lisovskiy@intel.com

drm/i915: Change bigjoiner state tracking to use the pipe bitmask

Get rid of the inflexible bigjoiner_linked_crtc pointer thing
and just track things as a bitmask of pipes instead. We can
also nuke the bigjoiner_slave boolean as the role of the pipe
can be determined from its position in the bitmask.

It might be possible to nuke the bigjoiner boolean as well
if we make encoder.compute_config() do the bitmask assignment
directly for the master pipe. But for now I left that alone so
that encoer.compute_config() will just flag the state as needing
bigjoiner, and the intel_atomic_check_bigjoiner() is still
responsible for determining the bitmask. But that may have to change
as the encoder may be in the best position to determine how
exactly we should populate the bitmask.

Most places that just looked at the single bigjoiner_linked_crtc
now iterate over the whole bitmask, eliminating the singular
slave pipe assumption.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203183823.22890-11-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

drm/i915: Split PPS write from DSC enable

The PPS SDP is fed into the transcoder whereas the DSC
block is (or at least can be) per pipe. Let's split these
into two distinct operations in an effort to untagle the
bigjoiner mess where we have two pipes feeding a single
transcoder.

Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211022103304.24164-7-ville.syrjala@linux.intel.com

drm/i915: Adjust intel_dsc_power_domain() calling convention

Pass the crtc+cpu_transcoder rather than the crtc state to
intel_dsc_power_domain(). This should allow us to reuse it
during readout as well.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210913144440.23008-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/dsc: abstract helpers to get bigjoiner primary/secondary crtc

Add a single point of truth for figuring out the primary/secondary crtc
for bigjoiner instead of duplicating the magic pipe +/- 1 in multiple
places.

Also fix the pipe validity checks to properly take non-contiguous pipes
into account. The current checks may theoretically overflow
i915->pipe_to_crtc_mapping[pipe], albeit with a warning, due to fused
off pipes, as INTEL_NUM_PIPES() returns the actual number of pipes on
the platform, and the check is for INTEL_NUM_PIPES() == pipe + 1.

Prefer primary/secondary terminology going forward.

v2:
- Improved abstractions for pipe validity etc.

Fixes: 8a029c113b17 ("drm/i915/dp: Modify VDSC helpers to configure DSC for Bigjoiner slave")
Fixes: d961eb20adb6 ("drm/i915/bigjoiner: atomic commit changes for uncompressed joiner")
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Manasi Navare <manasi.dl.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610090528.20511-1-jani.nikula@intel.com

drm/i915/dsc: abstract helpers to get bigjoiner primary/secondary crtc

Add a single point of truth for figuring out the primary/secondary crtc
for bigjoiner instead of duplicating the magic pipe +/- 1 in multiple
places.

Also fix the pipe validity checks to properly take non-contiguous pipes
into account. The current checks may theoretically overflow
i915->pipe_to_crtc_mapping[pipe], albeit with a warning, due to fused
off pipes, as INTEL_NUM_PIPES() returns the actual number of pipes on
the platform, and the check is for INTEL_NUM_PIPES() == pipe + 1.

Prefer primary/secondary terminology going forward.

v2:
- Improved abstractions for pipe validity etc.

Fixes: 8a029c113b17 ("drm/i915/dp: Modify VDSC helpers to configure DSC for Bigjoiner slave")
Fixes: d961eb20adb6 ("drm/i915/bigjoiner: atomic commit changes for uncompressed joiner")
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Manasi Navare <manasi.dl.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610090528.20511-1-jani.nikula@intel.com
(cherry picked from commit 17203224f0536cf223dc5789028d04a768d96ec3)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/bigjoiner: atomic commit changes for uncompressed joiner

Respective bit for master or slave to be set for uncompressed
bigjoiner in dss_ctl1 register.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514153711.2359617-16-matthew.d.roper@intel.com

drm/i915/dp: Modify VDSC helpers to configure DSC for Bigjoiner slave

Make vdsc work when no output is enabled. The big joiner needs VDSC
on the slave, so enable it and set the appropriate bits.
So remove encoder usage from dsc functions.

Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-5-manasi.d.navare@intel.com

drm/i915/dsc: add basic hardware state readout support

Add basic hardware state readout for DSC, and check the most relevant
details in the state checker.

v2:
- check for DSC power before reading its state
- check if source supports DSC at all

As a side effect, this should also get the power domains for the enabled
DSC on takeover, and subsequently disable DSC if it's not needed.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3fb018cf9bd9a4c275aab389b6ec0f2a4e938bb9.1575974743.git.jani.nikula@intel.com

drm/i915/dsc: make DSC source support helper generic

Move intel_dp_source_supports_dsc() from intel_dp.c as
intel_dsc_source_support() in intel_vdsc.c. The DSC source support is
more about DSC than about DP, and will be needed for DP independent
code.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6c9f646090913290fb00efd46a4332421bf95930.1575974743.git.jani.nikula@intel.com

drm/i915/dsc: split out encoder specific parts from DSC compute params

Split out the DP specific parts, making it easier to add DSI specific
configuration. Also move the encoder specific parts towards the end, to
allow overriding generic configuration if needed. This also improves
clarity by making it clear the encoder independent configuration does
not depend on the encoder specific parts.

v2: Rebase

Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191104141439.26312-3-jani.nikula@intel.com

drm/i915: move modesetting output/encoder code under display/

Add a new subdirectory for display code, and start off by moving
modesetting output/encoder code. Judging by the include changes, this is
a surprisingly clean operation.

v2:
- move intel_sdvo_regs.h too
- use tabs for Makefile file lists and sort them

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613084416.6794-2-jani.nikula@intel.com