drm/i915/dmc: Also disable HRR event on TGL/ADLS main DMC

Unlike later platforms TGL/ADLS has the half refresh rate (HRR) event
on the main DMC (as opposed to the pipe DMC). Since we're disabling
that event on all later platforms already let's do the same on
TGL/ADLS as well.

There is supposedly a bit somewhere (DMC_CHICKEN on TGL) to make
the handler not do anything, but we don't currently have code
to frob it. Though that bit should be off by default, the ADL+
experience has shown us that trusting any of this isn't a good
idea. So seems safer to just disable all event handlers we know
that we don't need.

Also the TGL/ADLS DMC firmware is apparently using the wrong event
(undelayed vblank) here anyway. It should be using the delayed
vblank event instead (like ADL+ firmware does), but they didn't
release a firmware fix for this and instead just hacked around
this in the Windows driver code :/

v2: Also disable the event on ADLS (Imre)

Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213150807.21331-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915: Enable a PIPEDMC whenever its corresponding pipe is enabled

Make sure that PIPEDMCs are enabled whenever the corresponding pipe is
enabled.

This is required at least by the latest ADLP v2.18 firmware, which adds
a new handler enabled by default and running whenever the pipe is
enabled at the vertical referesh rate.

Bspec: 50344, 67620

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102183324.862279-1-imre.deak@intel.com

drm/i915/d12+: Disable DMC handlers during loading/disabling the firmware

Disable the DMC event handlers before loading the firmware and after
uninitializing the display, to make sure the firmware is inactive. This
matches the Bspec "Sequences for Display C5 and C6" page for GEN12+.

Add a TODO comment for doing the same on pre-GEN12 platforms.

v2:
- Add a macro for the number of event handlers.
- Disable the event handlers only on GEN12+.
- s/dev_priv/i915/ in docbook comment.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20220728081440.1676857-1-imre.deak@intel.com

drm/i915/d12+: Disable DMC firmware flip queue handlers

Based on a bspec update the DMC firmware's flip queue handling events
need to be disabled before enabling DC5/6. i915 doesn't use the flip
queue feature atm, so disable it already after loading the firmware.
This removes some overhead of the event handler which runs at a 1 kHz
frequency.

Bspec: 49193, 72486, 72487

v2:
- Fix the DMC pipe A register offsets for GEN12.
- Disable the events on DG2 only on pipe A..D .
v3: (Lucas)
- Add TODO: to clarify the disabling sequence on all D13+
- s/intel_dmc_has_fw_payload/has_dmc_id_fw/
- s/simple_flipq/flipq/
- s/_GEN12,_GEN13/TGL_,ADLP_/
- s/MAINDMC/DMC/
v4:
- Only disable flip queues on TGL/DG2, as on other platforms the
corresponding event handlers don't exist.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> # v1
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220521130808.637449-1-imre.deak@intel.com

drm/i915/dmc: Add MMIO range restrictions

Bspec has added some steps that check forDMC MMIO range before
programming them

v2: Fix for CI
v3: move register defines to .h (Anusha)
- Check MMIO restrictions per pipe
- Add MMIO restricton for v1 dmc header as well (Lucas)
v4: s/_PICK/_PICK_EVEN and use it only for Pipe DMC scenario.
- clean up sanity check logic.(Lucas)
- Add MMIO range for RKL as well.(Anusha)
v5: Use DISPLAY_VER instead of per platform check (Lucas)

BSpec: 49193

Cc: stable@vger.kernel.org
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511000847.1068302-1-anusha.srivatsa@intel.com

drm/i915/dmc: split out dmc registers to a separate file

Clean up the massive i915_reg.h a bit with this isolated set of
registers.

v2: Remove stale comment (Lucas)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220330113417.220964-3-jani.nikula@intel.com