drm/i915: don't make assumptions about intel_wakeref_t type

intel_wakeref_t is supposed to be a mostly opaque cookie to its
users. It should only be checked for being non-zero and set to
zero. Debug logging its actual value is meaningless. Switch to just
debug logging whether the async_put_wakeref is non-zero.

The issue dates back to much earlier than
commit b49e894c3fd8 ("drm/i915: Replace custom intel runtime_pm tracker
with ref_tracker library"), but this is the one that brought about a
build failure due to the printf format.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20240102111222.2db11208@canb.auug.org.au
Fixes: b49e894c3fd8 ("drm/i915: Replace custom intel runtime_pm tracker with ref_tracker library")
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240104164600.783371-1-jani.nikula@intel.com

drm/i915: don't make assumptions about intel_wakeref_t type

intel_wakeref_t is supposed to be a mostly opaque cookie to its
users. It should only be checked for being non-zero and set to
zero. Debug logging its actual value is meaningless. Switch to just
debug logging whether the async_put_wakeref is non-zero.

The issue dates back to much earlier than
commit b49e894c3fd8 ("drm/i915: Replace custom intel runtime_pm tracker
with ref_tracker library"), but this is the one that brought about a
build failure due to the printf format.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20240102111222.2db11208@canb.auug.org.au
Fixes: b49e894c3fd8 ("drm/i915: Replace custom intel runtime_pm tracker with ref_tracker library")
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240104164600.783371-1-jani.nikula@intel.com

drm/i915: don't make assumptions about intel_wakeref_t type

intel_wakeref_t is supposed to be a mostly opaque cookie to its
users. It should only be checked for being non-zero and set to
zero. Debug logging its actual value is meaningless. Switch to just
debug logging whether the async_put_wakeref is non-zero.

The issue dates back to much earlier than
commit b49e894c3fd8 ("drm/i915: Replace custom intel runtime_pm tracker
with ref_tracker library"), but this is the one that brought about a
build failure due to the printf format.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20240102111222.2db11208@canb.auug.org.au
Fixes: b49e894c3fd8 ("drm/i915: Replace custom intel runtime_pm tracker with ref_tracker library")
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240104164600.783371-1-jani.nikula@intel.com
(cherry picked from commit de06b42edc5bf05aefbb7e2f59475d6022ed57e1)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/display: Fix IP version of the WAs

WAs 14011508470, 14011503030 were applied on IP versions beyond which
they are applicable. Fixed the IP version checks for these workarounds.

Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231128102451.825242-1-balasubramani.vivekanandan@intel.com

drm/i915: Replace custom intel runtime_pm tracker with ref_tracker library

Beside reusing existing code, the main advantage of ref_tracker is
tracking per instance of wakeref. It allows also to catch double
put.
On the other side we lose information about the first acquire and
the last release, but the advantages outweigh it.

Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030-ref_tracker_i915-v1-1-006fe6b96421@intel.com

drm/i915/display: Move disable_power_well module parameter under display

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024124109.384973-13-jouni.hogander@intel.com

drm/i915/display: Move enable_dc module parameter under display

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024124109.384973-10-jouni.hogander@intel.com

drm/i915/xe2lpd: Add DC state support

Xe2_LPD supports DC5, DC6, and DC9 (DC3CO no longer exists). The
overall programming and requirements to enter DC states are similar to
those of Xe_LPD+ although AUX transactions do not require DC5/DC6 exit
as they did previously.

Bspec: 68851, 68857, 68886, 69115
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919192128.2045154-21-lucas.demarchi@intel.com

drm/i915: Remove runtime suspended boolean from intel_runtime_pm struct

It's not necessary to carry separate suspended status information in
intel_runtime_pm struct as this information is already in underlying device
structure. Remove it and use pm_runtime_suspended() to obtain suspended
status information when needed.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230913100430.3433969-1-jouni.hogander@intel.com

drm/i915/display: Remove unused POWER_DOMAIN_MODESET

That power domain became unused after commit 41b4c7fe72b6 ("drm/i915:
Disable DC states for all commits").

Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817175312.295559-1-gustavo.sousa@intel.com

drm/i915/display: Remove unused POWER_DOMAIN_MASK

That macro became unused with commit 323286c81245 ("drm/i915: Move the
power domain->well mappings to intel_display_power_map.c").

Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230815201344.298573-1-gustavo.sousa@intel.com

drm/i915/rkl: s/RKL/ROCKETLAKE for platform/subplatform defines

Follow consistent naming convention. Replace RKL with
ROCKETLAKE.Replace IS_RKL_GRAPHICS_STEP with
IS_ROCKETLAKE && IS_DISPLAY_STEP.

v2:
- s/RKL/rkl in the subject prefix(Anusha)

v3:
- Unrolled wrapper IS_RKL_DISPLAY_STEP.
- Replace IS_PLATFORM && IS_DISPLAY_STEP (Jani/Tvrtko)

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230801135344.3797924-8-dnyaneshwar.bhadane@intel.com

drm/i915: Add way to specify the power-off delay of a display power domain

Add support for specifying a delay different than the current 100 ms
default for powering off a display power domain. This is needed by the
next patch which delays re-enabling DC states during modesets to avoid
the off->on->off toggling overhead of the DC_off power well, but does
this using a < 100 ms delay for a better utilization of DC power saving
states.

Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616185104.2502003-3-imre.deak@intel.com

drm/i915: Re-init clock gating on coming out of PC8+

PC8+ clobbers a bunch of displays registers which need to
be restored by hand or else we lost a bunch of workarounds.
The important ones for us are at least CHICKEN_PAR2* and
CHICKEN_PIPESL*.

Curiously at least some CHICKEN_PAR1* registers
are preserved by the hardware/firmware. Unfortunately Bspec
doens't really specify what gets clobbered vs. preserved
so further reverse engieering might be warranted to figure
out the specifics.

Note that PCH_LP_PARTITION_LEVEL_DISABLE is also set by
lpt_init_clock_gating() so the rmw in hsw_disable_pc8()
is now redundant. Remove it.

TODO: I suspect most gt stuff doesn't need this and we should
finish moving all of them from init_clock_gating() to
a more appropriate place...

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230609141404.12729-2-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>

drm/i915/mtl: Add support for PM DEMAND

MTL introduces a new way to instruct the PUnit with
power and bandwidth requirements of DE. Add the functionality
to program the registers and handle waits using interrupts.
The current wait time for timeouts is programmed for 10 msecs to
factor in the worst case scenarios. Changes made to use REG_BIT
for a register that we touched(GEN8_DE_MISC_IER _MMIO).

Wa_14016740474 is added which applies to Xe_LPD+ display

v2: checkpatch warning fixes, simplify program pmdemand part

v3: update to dbufs and pipes values to pmdemand register(stan)
Removed the macro usage in update_pmdemand_values()

v4: move the pmdemand_pre_plane_update before cdclk update
pmdemand_needs_update included cdclk params comparisons
pmdemand_state NULL check (Gustavo)
pmdemand.o in sorted order in the makefile (Jani)
update pmdemand misc irq handler loop (Gustavo)
active phys bitmask and programming correction (Gustavo)

v5: simplify pmdemand_state structure
simplify methods to find active phys and max port clock
Timeout in case of previou pmdemand task pending (Gustavo)

v6: rebasing
updates to max_ddiclk calculations (Gustavo)
updates to active_phys count method (Gustavo)

v7: use two separate loop to iterate throug old and new
crtc states to calculate the active phys (Gustavo)

v8: use uniform function names (Gustavo)

v9: For phys change iterate through connectors (Imre)
Look for change in phys for pmdemand update (Gustavo, Imre)
Some more stlying changes (Imre)
Update pmdemand state during HW readout/sanitize (Imre)

v10: Fix CI checkpatch warnings

v11: use correct pmdemand object pointer during hw readout,
simplify the check for phys need update (Gustavo)

v12: Handle possible non serialize cases (Imre)
Initialise also pmdemand params HW readout (Imre)
Update active phys mask during sanitize calls (Imre)
Check TC/encoder changes to limit connector update (Imre)

v13: Check display version before accessing pmdemand functions

v14: Move is_serialized to intel_global_state.c
simplify update params and other stlying issues (Imre)

Bspec: 66451, 64636, 64602, 64603
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> #v4
Acked-by: Gustavo Sousa <gustavo.sousa@intel.com> #v11
Reviewed-by: Imre Deak <imre.deak@intel.com>
[RK: Fixed minor typo in one of the comments. s/qclck_gc/qclk_gv/]
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606201032.347449-1-vinod.govindapillai@intel.com

drm/i915: Remove i915_drm_suspend_mode

enum i915_drm_suspend_mode suspend_mode is only used in
intel_display_power, while we only care about whether we perform a
s2idle. Remove it and use a simple bool.

v2: Rebase

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> # v1
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230529105900.1942814-1-jani.nikula@intel.com

drm/i915: Convert INTEL_INFO()->display to a pointer

Rather than embeddeding the display's device info within the main device
info structure, just provide a pointer to the display-specific
structure. This is in preparation for moving the display device info
definitions into the display code itself and for eventually allowing the
pointer to be assigned at runtime on platforms that use GMD_ID for
device identification.

In the future, this will also eventually allow the same display device
info structures to be used outside the current i915 code (e.g., from the
Xe driver).

v2:
- Move introduction of DISPLAY_INFO() to this patch. (Andrzej)
v3:
- Also use DISPLAY_INFO() in intel_display_reg_defs.h. (Andrzej)
- Use "{}" instead of "{ 0 }" for empty struct init. (Jani)

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230523195609.73627-3-matthew.d.roper@intel.com

drm/i915/display: add i915 parameter to I915_STATE_WARN()

Add i915 parameter to I915_STATE_WARN() and use device based logging.

Done using cocci + hand edited where there was no i915 local variable
ready.

v2: avoid null deref in verify_connector_state()

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512181658.1735594-1-jani.nikula@intel.com

drm/i915: use explicit includes for i915_reg.h and i915_irq.h

A lot of places include i915_reg.h implicitly via i915_irq.h, which gets
included implicitly via intel_display_trace.h. Remove the includes from
the headers, and include i915_reg.h and i915_irq.h explicitly where
needed.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230419094243.366821-1-jani.nikula@intel.com

drm/i915/wm: split out SKL+ watermark regs to a separate file

Clean up i915_reg.h by splitting out SKL+ watermark regs to
display/skl_watermark_regs.h.

v2: Rebased

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> # v1
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331090949.2858951-1-jani.nikula@intel.com

drm/i915/display/intel_display_power: Fix incorrectly documented function __intel_display_power_put_async()

Fixes the following W=1 kernel build warning(s):

drivers/gpu/drm/i915/display/intel_display_power.c:712: warning: expecting prototype for intel_display_power_put_async(). Prototype was for __intel_display_power_put_async() instead

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Imre Deak <imre.deak@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-18-lee@kernel.org

drm/i915/pps: split out PPS regs to a separate file

Clean up i915_reg.h by splitting out PPS regs to
display/intel_pps_regs.h.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/80d66ee6d7e56153a0ab25640ac2dad239b1ef6e.1678973282.git.jani.nikula@intel.com

drm/i915: Make utility pin asserts more accurate

Only the PWM output mode of the utility pin is incompatible
with DC6/LCPLL disable. Check for that specifically.

References: https://gitlab.freedesktop.org/drm/intel/-/issues/6609
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230328164938.8193-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/display/mtl: Program latch to phy reset

Latch reset of phys during DC9 and when driver is unloaded to avoid
phy reset.

Specification ask us to program it closer to the step that enables
DC9 in DC_STATE_EN but doing this way allow us to sanitize the phy
latch during driver load.

BSpec: 49197
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230301201053.928709-6-radhakrishna.sripada@intel.com

drm/i915/power: move dc state members to struct i915_power_domains

There's only one reference to the struct intel_dmc members dc_state,
target_dc_state, and allowed_dc_mask within intel_dmc.c, begging the
question why they are under struct intel_dmc to begin with.

Moreover, the only references to i915->display.dmc outside of
intel_dmc.c are to these members.

They don't belong. Move them from struct intel_dmc to struct
i915_power_domains, which seems like a more suitable place.

Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230301122944.1298929-1-jani.nikula@intel.com

drm/i915/display/power: use intel_de_rmw if possible

The helper makes the code more compact and readable.

Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230217111836.864959-1-andrzej.hajda@intel.com

drm/i915/dg1: Drop support for pre-production steppings

Several post-DG1 platforms have been brought up now, so we're well past
the point where we usually drop the workarounds that are only applicable
to internal/pre-production hardware.

Production DG1 hardware always has a B0 stepping for both display and
GT.

Bspec: 44463
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127224313.4042331-3-matthew.d.roper@intel.com

drm/i915/tgl: Drop support for pre-production steppings

Several post-TGL platforms have been brought up now, so we're well past
the point where we usually drop the workarounds that are only applicable
to internal/pre-production hardware.

Production TGL hardware always has display stepping C0 or later and GT
stepping B0 or later (this is true for both the original TGL and the U/Y
subplatform).

Bspec 44455
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127224313.4042331-2-matthew.d.roper@intel.com

drm/i915/power: switch to intel_de_* register accessors in display code

Avoid direct uncore use in display code.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/21ea52a7c4fd400c256316143e3a2c9106c554d9.1670433372.git.jani.nikula@intel.com

drm/i915/tgl+: Enable display DC power states on all eDP ports

Starting with TGL eDP is supported on ports B+ (besides port A), so make
sure DC states are not blocked on any such ports. For this add an
AUX_IO_<port> power domain for each port with eDP support. These domains
similarly to AUX_IO_A enable only the AUX_IO_<port> power well for an
enabled port, whereas the existing AUX_<port> domains enable both the
AUX_IO_<port> and the DC_OFF power wells as required by DP AUX transfers.

v2: (Ville)
- Split the change using AUX vs. AUX_IO on port A to a separate patch.
- Select AUX_IO vs. AUX based on crtc_state->has_psr instead of
is_edp().
v3:
- Rebased on checking intel_encoder_can_psr() instead of crtc->has_psr.
v4:
- Fix warn in intel_display_power_aux_io_domain(). (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-6-imre.deak@intel.com

drm/i915: Move the POWER_DOMAIN_AUX_IO_A definition to its logical place

Move the definition of the AUX_IO_A power domain, requiring only the
corresponding AUX_IO_A power well to be enabled, before all the
AUX_<port> power domains, which require both the AUX_IO_<port> and the
DC_OFF power wells to be enabled.

No functional change.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-4-imre.deak@intel.com

drm/i915: Fix warn in intel_display_power_*_domain() functions

The intel_display_power_*_domain() functions should always warn if a
default domain is returned as a fallback, fix this up. Spotted by Ville.

Fixes: 979e1b32e0e2 ("drm/i915: Sanitize the port -> DDI/AUX power domain mapping for each platform")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-2-imre.deak@intel.com

drm/i915/display: remove drm_device aliases

drm_device pointers are unwelcome.

Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006204844.2831303-1-andrzej.hajda@intel.com

drm/i915: Fix warn in intel_display_power_*_domain() functions

The intel_display_power_*_domain() functions should always warn if a
default domain is returned as a fallback, fix this up. Spotted by Ville.

Fixes: 979e1b32e0e2 ("drm/i915: Sanitize the port -> DDI/AUX power domain mapping for each platform")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-2-imre.deak@intel.com
(cherry picked from commit 10b85f0e1d922210ae857afed6d012ec32c4b6cb)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Extract skl_watermark.c

Pull all the skl+ watermark code (and the dbuf/sagv/ipc code
since it's all sort of intertwined and I'm too lazy to think
of a finer grained split right now) into its own file from the
catch-all intel_pm.c.

Also sneak in the s/dev_priv/i915/ rename while at it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908191646.20239-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: move dbuf under display sub-struct

Move display dbuf related members under drm_i915_private display
sub-struct.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3363a516c12bd8bfb240131e9eb9fc3a0f3057a3.1661779055.git.jani.nikula@intel.com

drm/i915: move and group power related members under display.power

Move display power related members under drm_i915_private display
sub-struct.

Arguably chv_phy_control and chv_phy_assert could be placed in a phy
substruct, but they are only used in the power code.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/57bfa82f6fe85a775f80c398b2a7dff77b9452b0.1661779055.git.jani.nikula@intel.com

drm/i915: move and group cdclk under display.cdclk

Move display cdclk related members under drm_i915_private display
sub-struct.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7df23655be5dc70fb1a2b43ce41e1682e40395d8.1661779055.git.jani.nikula@intel.com

drm/i915: move dmc to display.dmc

Move display dmc related members under drm_i915_private display
sub-struct.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7cb91222e099b96b82c74b5f086d50c43459d61b.1661346845.git.jani.nikula@intel.com

drm/i915/display/mtl: Extend MBUS programming

Display version 14 also supports MBUS joining just like ADL-P
and also it does not need MBUS initialization, so extending ADL-P
code paths to display version 14 and higher.

Bspec: 49213

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220818234202.451742-20-radhakrishna.sripada@intel.com

drm/i915/mtl: Add support for MTL in Display Init sequences

The initialization sequence for Meteorlake reuses the sequence for
icelake for most parts. Some changes viz. reset PICA handshake
are added.

Bspec: 49189

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220818234202.451742-10-radhakrishna.sripada@intel.com

drm/i915/backlight: split out backlight registers to a separate file

Declutter i915_reg.h by splitting backlight registers to a separate
file. Also include the utility pin definitions, even though they are
used for non-backlight things too.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220815094838.3511723-1-jani.nikula@intel.com

drm/i915/xelpd: Fix unclaimed accesses while loading PIPEDMC-C/D

At the moment on DG2 at least loading the DMC firmware's PIPEDMC C and D
programs leads to sporadic unclaimed register accesses while programming
the initial state as described by the firmware's "MMIO init" table. This
will also lead to later unclaimed accesses for unrelated transcoder/pipe
registers backed by the pipe C and D display power wells.

Disabling the PIPEDMC clock gating during initialization - similarly to
Wa_16015201720 fixed this problem in my tests. While pipe A an B
requires the clock gating to be disabled all the time pipe C and D
requires this only while accessing the PIPEDMC registers.

Bspec: 49193
References: https://gitlab.freedesktop.org/drm/intel/-/issues/6526
References: https://gitlab.freedesktop.org/drm/intel/-/issues/6308
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808103054.3586074-1-imre.deak@intel.com

drm/i915/dg2: Add support for DC5 state

With the latest DMC in place, enabling DC5 on DG2.

Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728183641.55692-1-anusha.srivatsa@intel.com

drm/i915/d13: Add Wa_16015201720 disabling clock gating for PIPEDMC-A/B

Add a workaround making sure that PIPEDMC-A/B is enabled when the
firmware needs these on D13 platforms to save/restore the registers
backed by the PW_1 and PW_A power wells.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220727164523.1621361-2-imre.deak@intel.com

drm/i915/d12+: Disable DMC handlers during loading/disabling the firmware

Disable the DMC event handlers before loading the firmware and after
uninitializing the display, to make sure the firmware is inactive. This
matches the Bspec "Sequences for Display C5 and C6" page for GEN12+.

Add a TODO comment for doing the same on pre-GEN12 platforms.

v2:
- Add a macro for the number of event handlers.
- Disable the event handlers only on GEN12+.
- s/dev_priv/i915/ in docbook comment.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20220728081440.1676857-1-imre.deak@intel.com

lib/bitmap: change type of bitmap_weight to unsigned long

bitmap_weight() doesn't return negative values, so change it's type
to unsigned long. It may help compiler to generate better code and
catch bugs.

Signed-off-by: Yury Norov <yury.norov@gmail.com>

drm/i915: Nuke PCH_JSP

JSP is based on ICP and we don't really need to differentiate
between the two. So let's just delcare JSP to be ICP.

The only slight change here is for Wa_14011294188 which we
used to apply for JSP but now we'll only apply to MCC. This
should be fine since the issue being dealt with was introduced
in TGP and inherited into MCC. JSP being derived from ICP
should not need this workaround.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630150600.24611-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Move dbuf details to INTEL_INFO->display

DBUF is a display thing, so move it into the display
portion of the device info.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220623130900.26078-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/pcode: Extend pcode functions for multiple gt's

Each gt contains an independent instance of pcode. Extend pcode functions
to interface with pcode on different gt's. To avoid creating dependency of
display functionality on intel_gt, pcode function interfaces are exposed in
terms of uncore rather than intel_gt. Callers have been converted to pass
in the appropritate (i915 or intel_gt) uncore to the pcode functions.

v2: Expose pcode functions in terms of uncore rather than gt (Jani/Rodrigo)
v3: Retain previous function names to eliminate needless #defines (Rodrigo)
v4: Move out i915_pcode_init() to a separate patch (Tvrtko)
Remove duplicated drm_err/drm_dbg from intel_pcode_init() (Tvrtko)

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519085732.1276255-2-tvrtko.ursulin@linux.intel.com
[tursulin: fixup merge conflict]

drm/i915: Fix 'mixing different enum types' warnings in intel_display_power.c

Fix the following sparse warnings:

drivers/gpu/drm/i915/display/intel_display_power.c:2431:34: warning: mixing different enum types:
drivers/gpu/drm/i915/display/intel_display_power.c:2431:34: unsigned int enum intel_display_power_domain
drivers/gpu/drm/i915/display/intel_display_power.c:2431:34: int enum port
drivers/gpu/drm/i915/display/intel_display_power.c:2442:37: warning: mixing different enum types:
drivers/gpu/drm/i915/display/intel_display_power.c:2442:37: unsigned int enum intel_display_power_domain
drivers/gpu/drm/i915/display/intel_display_power.c:2442:37: int enum port
drivers/gpu/drm/i915/display/intel_display_power.c:2468:43: warning: mixing different enum types:
drivers/gpu/drm/i915/display/intel_display_power.c:2468:43: unsigned int enum intel_display_power_domain
drivers/gpu/drm/i915/display/intel_display_power.c:2468:43: unsigned int enum aux_ch
drivers/gpu/drm/i915/display/intel_display_power.c:2479:35: warning: mixing different enum types:
drivers/gpu/drm/i915/display/intel_display_power.c:2479:35: unsigned int enum intel_display_power_domain
drivers/gpu/drm/i915/display/intel_display_power.c:2479:35: unsigned int enum aux_ch

Fixes: 979e1b32e0e2 ("drm/i915: Sanitize the port -> DDI/AUX power domain mapping for each platform")
Reported-by: Jani Nikula <jani.nikula@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510114957.406070-1-imre.deak@intel.com

drm/i915/dmc: Load DMC on DG2

Add Support for DC states on Dg2.

v2: Add dc9 as the max supported DC states and disable DC5.
v3: set max_dc to 0. (Imre)

Cc: Imre Deak <imre.deak@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>(v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504202213.740200-2-anusha.srivatsa@intel.com

drm/i915: Fix 'mixing different enum types' warnings in intel_display_power.c

Fix the following sparse warnings:

drivers/gpu/drm/i915/display/intel_display_power.c:2431:34: warning: mixing different enum types:
drivers/gpu/drm/i915/display/intel_display_power.c:2431:34: unsigned int enum intel_display_power_domain
drivers/gpu/drm/i915/display/intel_display_power.c:2431:34: int enum port
drivers/gpu/drm/i915/display/intel_display_power.c:2442:37: warning: mixing different enum types:
drivers/gpu/drm/i915/display/intel_display_power.c:2442:37: unsigned int enum intel_display_power_domain
drivers/gpu/drm/i915/display/intel_display_power.c:2442:37: int enum port
drivers/gpu/drm/i915/display/intel_display_power.c:2468:43: warning: mixing different enum types:
drivers/gpu/drm/i915/display/intel_display_power.c:2468:43: unsigned int enum intel_display_power_domain
drivers/gpu/drm/i915/display/intel_display_power.c:2468:43: unsigned int enum aux_ch
drivers/gpu/drm/i915/display/intel_display_power.c:2479:35: warning: mixing different enum types:
drivers/gpu/drm/i915/display/intel_display_power.c:2479:35: unsigned int enum intel_display_power_domain
drivers/gpu/drm/i915/display/intel_display_power.c:2479:35: unsigned int enum aux_ch

Fixes: 979e1b32e0e2 ("drm/i915: Sanitize the port -> DDI/AUX power domain mapping for each platform")
Reported-by: Jani Nikula <jani.nikula@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510114957.406070-1-imre.deak@intel.com
(cherry picked from commit 7ecc3cc8a7b39f08eee9aea7b718187583342a70)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Remove the XELPD specific AUX and DDI power domains

The spec calls the XELPD_D/E ports just D/E, the platform prefix in the
domain names was only needed by the port->domain mapping relying on
matching enum values for the whole port/domain range (and the
corresponding aliasing between the platform specific domain enums).
Since a previous patch we can define the port->domain mapping explicitly
so do this by reusing the already existing D/E power domain names.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-18-imre.deak@intel.com

drm/i915: Remove the ICL specific TBT power domains

The spec calls the ICL TBT AUX power well instances TBT1-4 (similarly to
all later platforms), align the power domain names with the spec.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-16-imre.deak@intel.com

drm/i915: Remove the aliasing of power domain enum values

Aliasing the intel_display_power_domain enum values was required because
of the u64 power domain mask size limit. This makes the dmesg/debugfs
printouts of the domain names somewhat unclear, for instance domain
names for port D are shown on D12+ platforms where the corresponding
port is called TC1. Make this clearer by removing the aliasing which is
possible after a previous patch converting the mask to a bitmap.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-15-imre.deak@intel.com

drm/i915: Sanitize the port -> DDI/AUX power domain mapping for each platform

Atm the port -> DDI and AUX power domain mapping is specified by relying
on the aliasing of the platform specific intel_display_power_domain enum
values. For instance D12+ platforms refer to the 'D' port and power
domain instances, which doesn't match the bspec terminology, on these
platforms the corresponding port is TC1. To make it clear what
port/domain the code refers to add a mapping between them which matches
the bspec terms on different display versions.

This also allows for removing the aliasing in enum values in a follow-up
patch.

v2: Add the functions to intel_display_power.c, use
intel_display_power_ prefix.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-14-imre.deak@intel.com

drm/i915: Convert the u64 power well domains mask to a bitmap

To remove the aliasing of the power domain enum values in a follow-up
patch in this patchset (requiring a bigger mask) and allow for defining
additional power domains in the future (at least some upcoming TypeC
changes requires this) convert the u64 i915_power_well_desc::domains
mask to a bitmap.

For simplicity I changed the for_each_power_domain_well() macros to
accept one domain only instead of a mask, as there isn't any current
user passing multiple domains.

v2: Don't add a typedef for the bitmap struct. (Jani)

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-9-imre.deak@intel.com

drm/i915: Convert the power well descriptor domain mask to an array of domains

The next patch converts the i915_power_well_desc::domain mask from a u64
mask to a bitmap. I didn't find a reasonably simple way to initialize
bitmaps statically, so prepare for the next patch here by converting the
masks to an array of domain enums and initing the masks from these
arrays during module loading.

v2: Clarify list vs. array in the commit message. (Jani)

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-8-imre.deak@intel.com

drm/i915: Rename the power domain names to end with pipes/ports

Make all power domain names end with the pipe/port instance for
consistency.

No functional changes.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-6-imre.deak@intel.com

drm/i915: Move the power domain->well mappings to intel_display_power_map.c

Move the list of platform specific power domain -> power well
definitions to intel_display_power_map.c. While at it group the
platforms' power domain macros with the corresponding power well lists
and keep all the power domain lists in the same order (matching the enum
order).

No functional changes.

v2:
- s/intel_display_power_internal.h/intel_display_power_map.h/ (Jani)
- Simplify intel_cleanup_power_wells().
- Don't move intel_display_power_domain_str().
v3:
- Rename intel_init/cleanup_power_wells() to
intel_display_power_map_init/cleanup().
- Add documentation to intel_display_power_map_init/cleanup().

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-3-imre.deak@intel.com

drm/i915: Unexport the for_each_power_well() macros

The for_each_power_well() macros are only used in intel_display_power.c
and intel_display_power_well.c, so unexport them.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-2-imre.deak@intel.com

drm/i915: Move per-platform power well hooks to intel_display_power_well.c

Move the implementation of platform specific power well hooks to
intel_display_power_well.c, to reduce the clutter in
intel_display_power.c.

The locking of all the power domain/power well state is handled in the
power domain functions in intel_display_power.c using
i915_power_domains::lock. This patch also moves the
chy_phy_powergate_ch/lanes() functions to intel_display_power_well.c
which borrow the same lock to protect the DISPLAY_PHY_CONTROL register
state, which the HW uses both for toggling power wells and power gating
PHY lanes.

No functional change.

v2:
- Clarify in the commit log why CHV functions using the
i915_power_domains::lock were moved, while others locking the power
domain/well state were kept in intel_display_power.c . (Jouni)
- Move forward declaration of chv_phy_powergate_ch/lanes() to
intel_display_power_well.h .

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-1-imre.deak@intel.com

drm/i915/dmc: move assert_dmc_loaded() to intel_dmc.c

Start localizing DMC register and data access to intel_dmc.c.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4b96fe56c9c01bc671992dd6fe619638b157878f.1647870374.git.jani.nikula@intel.com

drm/i915/dmc: simplify intel_dmc_load_program() conditions

intel_dmc_load_program() is only ever called when
intel_dmc_has_payload() is true. Move the condition within
intel_dmc_load_program() to let it be called directly.

Also note that intel_dmc_has_payload() will always return false when
HAS_DMC() is false. Remove the redundant check.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c8ec46a44071f80b9c97617391b30e0c61ebc3e6.1647870374.git.jani.nikula@intel.com

drm/i915: Use str_enable_disable()

Remove the local enabledisable() implementation and adopt the
str_enable_disable() from linux/string_helpers.h.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225234631.3725943-2-lucas.demarchi@intel.com

drm/i915: Move intel_display_power_well_is_enabled() to intel_display_power_well.c

Move intel_display_power_well_is_enabled() to intel_power_well.c, as a step
towards making the low-level power well internals (i915_power_well_ops/desc
structs) hidden.

Eventually the call to this function and in general accessing power
wells directly from elsewhere in the driver should be replaced by the
use of power domains.

No functional change.

Suggested-by: Jani Nikula <jani.nikula@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222165137.1004194-9-imre.deak@intel.com

drm/i915: Add functions to get a power well's state/name/domains/mask/refcount

Add functions to get a power well's actual- and cached-enabled state,
name, domain mask and refcount, as a step towards making the low-level
power well internals (i915_power_well_ops/desc structs) hidden.

No functional change.

Suggested-by: Jani Nikula <jani.nikula@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222165137.1004194-8-imre.deak@intel.com

drm/i915: Add function to call a power well's sync_hw() hook

Add a function to call a power well's sync_hw() hook, instead of
open-coding the same, as a step towards making the low-level
power well internals (i915_power_well_ops/desc structs) hidden.

The cached-enable state should be always up-to-date, so update it
whenever sync_hw() is called.

No functional change.

Suggested-by: Jani Nikula <jani.nikula@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222165137.1004194-7-imre.deak@intel.com

drm/i915: Move power well get/put/enable/disable functions to a new file

Move the power well get/put/enable/disable hooks to the new
intel_display_power_well.c file. The motivation is to reduce the clutter
in intel_display_power.c, keeping the functionality related to power
domains in that file and moving the low-level power well functionality
to intel_display_power_well.c.

No functional change.

Suggested-by: Jani Nikula <jani.nikula@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222165137.1004194-6-imre.deak@intel.com

drm/i915: Move i915_power_well_regs struct into i915_power_well_ops

Move the i915_power_well_regs struct into i915_power_well_ops. Most of
the power wells use the same ops/regs combination, so this saves some
space and also simplifies the platform power domain->power well
definitions.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222165137.1004194-5-imre.deak@intel.com

drm/i915: Remove redundant state verification during TypeC AUX power well disabling

Commit d5ce34da31456a
("drm/i915: Add state verification for the TypeC port mode")
added a verification to the TypeC AUX power well enable()/disable()
hooks to check if the TypeC port related to this power well is properly
locked. If the disabling happens asynchronously the verification is
skipped, since in this case the port is unlocked. The detection of
asnychronous disabling doesn't work as intended though, since the power
well's reference count is always 0 when its disable() hook is called
(and since there won't be any domain reference held for this power well
either, the verification is always skipped); remove the verification
from the disable() hook for now. In the power well's enable() hook the
power well's reference will be always >0 and there won't be any
asynchronous disabling pending for it, so we can drop the async refcount
check from there.

No functional change.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222165137.1004194-4-imre.deak@intel.com

drm/i915: Sanitize open-coded power well enable()/disable() calls

Instead of open-coding the call of the power wells' enable()/disable()
hooks use the corresponding helper functions. This will also ensure that
the power well's cached-enable state is always up-to-date. Luckily the
lack of this updating hasn't been a problem, since the state either
didn't change (in intel_display_power_set_target_dc_state()), or got
updated subsequently (for vlv_cmnlane_wa(), in the following
intel_power_domains_sync_hw()).

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222165137.1004194-3-imre.deak@intel.com

drm/i915: Fix the VDSC_PW2 power domain enum value

The POWER_DOMAIN_TRANSCODER() macro depends on the
POWER_DOMAIN_TRANSCODER_A/B .. DSI_A/C enum values to be consecutive,
move POWER_DOMAIN_TRANSCODER_VDSC_PW2 after these to ensure this. The
wrong order didn't cause a problem, since the DSI_A/C domains are in
always-on power wells on all relevant platforms. The same power well
ends up being enabled/disabled when the VDSC_PW2 domain is selected
incorrectly.

While at it add a code comment about enum values that need to stay
consecutive.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222165137.1004194-2-imre.deak@intel.com

drm/i915: Move MCHBAR registers to their own header

Registers that exist within the MCH BAR and are mirrored into the GPU's
MMIO space are a good candidate to separate out into their own header.

For reference, the mirror of the MCH BAR starts at the following
locations in the graphics MMIO space (the end of the MCHBAR range
differs slightly on each platform):

* Pre-gen6: 0x10000
* Gen6-Gen11 + RKL: 0x140000

v2:
- Create separate patch to swtich a few register definitions to be
relative to the MCHBAR mirror base.
- Drop upper bound of MCHBAR mirror from commit message; there are too
many different combinations between various platforms to list out,
and the documentation is spotty for the older pre-gen6 platforms
anyway.

Bspec: 134, 51771
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220215061342.2055952-2-matthew.d.roper@intel.com

drm/i915: Disable unused power wells left enabled by BIOS

Make sure all unused power wells left enabled by BIOS get disabled
during driver loading and system resume.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5028
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202104249.2680843-1-imre.deak@intel.com

drm/i915/cdclk: update intel_dump_cdclk_config() logging

Gather some intel_dump_cdclk_config() changes together to avoid extra
churn: Rename to intel_cdclk_dump_config() to following naming
conventions. Pass in i915. Use i915 for struct drm_device based
logging. Switch to KMS drm debug class.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/80469a83a74912ad69c4518d9cc68f07d65e9aaf.1642769982.git.jani.nikula@intel.com

drm/i915/pcode: rename sandybridge_pcode_* to snb_pcode_*

Prefer acronym-based naming to be in line with the rest of the driver.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220112111740.1208374-1-jani.nikula@intel.com

drm/i915: Move combo PHY registers to their own header

These registers are only needed in a couple files and on specific
platforms; let's keep them separate from the general register pool.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111051600.3429104-10-matthew.d.roper@intel.com

drm/i915: Move pipe/transcoder/abox masks under intel_device_info.display

Collect the dipslay related mask under the display sub-structure
in intel_device_info.

Note that there is a slight change in behaviour in that we zero
out .display entirely when !HAS_DISPLAY (aka. pipe_mask==0), so
now we also zero out the other masks (although cpu_transocder_mask
should already be zero of pipe_mask is zero). abox_mask is
only used by the display core init when HAS_DISPLAY is true, so
the actual behaviour of the system shouldn't change despite the
zeroing of these masks.

There is a lot more display stuff directly in device info that
could be moved over. Maybe someone else will be inspired to do it...

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211210122726.12577-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: move structs from intel_display_power.h to .c

Anything internal to the implementation should be hidden away. Move the
intel_display_power structs to the .c file.

Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211116171434.20516-4-jani.nikula@intel.com

drm/i915/debugfs: move debug printing to intel_display_power.c

The debugfs should have no special privileges to look into the
implementation guts. Move the actual debug printing of power domains to
intel_display_power.c.

Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211116171434.20516-3-jani.nikula@intel.com

drm/i915/dsi/xelpd: Disable DC states in Video mode

MIPI DSI transcoder cannot be in video mode to support any of the
display C states.

Bspec: 49195 (For DC*co DSI transcoders cannot be in video mode)
Bspec: 49193 (Hardware does not support DC5 or DC6 with MIPI DSI enabled)
Bspec: 49188 (desc of DSI_DCSTATE_CTL talks about cmd mode PM control

v2: Align to the power domain ordering (Jani)
Add bspec references (Imre)

Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019151435.20477-4-vandita.kulkarni@intel.com

drm/i915: make array states static const

Don't populate the read-only array states on the stack but instead it
static. Also makes the object code smaller.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210915112702.12783-1-colin.king@canonical.com

drm/i915/adlp: Implement workaround 16013190616

New workaround added to specification, requiring bit 15 of
GEN8_CHICKEN_DCPR_1 to be programed before power well 1 is enabled.

BSpec: 54369
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211028230449.115832-1-jose.souza@intel.com

drm/i915/display: Rename POWER_DOMAIN_DPLL_DC_OFF to POWER_DOMAIN_DC_OFF

This power domain to disable DC states will be used in places outside
of DPLL, so making the name more generic.

Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Caz Yokoyama <caz.yokoyama@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020003558.222198-1-jose.souza@intel.com

drm/i915: Move PCH refclock stuff into its own file

Move the PCH refclk stuff (including all the LPT/WPT
iCLKIP/CLKOUT_DP things) to its own file.

We also suck in the mPHY programming from intel_fdi.c
since we're the only caller.

Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015071625.593-2-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>

drm/i915: split out intel_pcode.[ch] to separate file

The snb+ pcode mailbox code is not sideband, so split it out to a
separate file. As can be seen from the #include changes, very few places
use both sideband and pcode.

Code movement only.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/185deb18eb739e5ae019e27834b9997dcc1347bc.1634207064.git.jani.nikula@intel.com

drm/i915: split out vlv sideband to a separate file

The VLV/CHV sideband code is pretty distinct from the rest of the
sideband code. Split it out to new vlv_sideband.[ch].

Pure code movement with relevant #include changes, and a tiny checkpatch
fix on top.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/755ebbbaf01fc6d306b763b6ef60f45e671ba290.1634119597.git.jani.nikula@intel.com

drm/i915/dpll: move dpll modeset asserts to intel_dpll.c

Keep the functionality and the assert code together.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0229659fb8af6c91c774408c6f7bb8c4ff8735e3.1632992608.git.jani.nikula@intel.com

drm/i915/tc: Add/use helpers to retrieve TypeC port properties

Instead of directly accessing the TypeC port internal struct members,
add/use helpers to retrieve the corresponding properties.

No functional change.

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921002313.1132357-6-imre.deak@intel.com

drm/i915: add wrappers around cdclk vtable funcs.

This adds wrappers around all the vtable callers so they are in
one place.

Suggested by Jani.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c3dd7aaad039e76acde9dda7211468907aa657c0.1632869550.git.jani.nikula@intel.com

drm/i915: Tweaked Wa_14010685332 for all PCHs

dispcnlunit1_cp_xosc_clkreq clock observed to be active on TGL-H platform
despite Wa_14010685332 original sequence,
thus blocks entry to deeper s0ix state.

The Tweaked Wa_14010685332 sequence fixes this issue, therefore use tweaked
Wa_14010685332 sequence for every PCH since PCH_CNP.

v2:
- removed RKL from comment and simplified condition. [Rodrigo]

Fixes: b896898c7369 ("drm/i915: Tweaked Wa_14010685332 for PCHs used on gen11 platforms")
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210810113112.31739-2-anshuman.gupta@intel.com

drm/i915/dg1: Adjust the AUDIO power domain

DG1 and XE_PLD platforms has Audio MMIO/VERBS lies in PG0 power
well. Adjusting the power domain accordingly to
POWER_DOMAIN_AUDIO_MMIO for audio detection and
POWER_DOMAIN_AUDIO_PLAYBACK for audio playback.

While doing this it requires to use POWER_DOMAIN_AUDIO_MMIO
power domain instead of POWER_DOMAIN_AUDIO in crtc power domain mask
and POWER_DOMAIN_AUDIO_PLAYBACK with intel_display_power_{get, put}
to enable/disable display audio codec power.

It will save the power in use cases when DP/HDMI connectors
configured with PIPE_A without any audio playback.

v1: Changes since RFC
- changed power domain names. [Imre]
- Removed TC{3,6}, AUX_USBC{3,6} and TBT from DG1
power well and PW_3 power domains. [Imre]
- Fixed the order of powe wells , power domains and its
registration. [Imre]

v2:
- Not allowe DC states when AUDIO_MMIO domain enabled. [Imre]

v3:
- Squashes the commits of series to avoid build failure.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
[Fix typo in commit message and in AUDIO_PLAYBACK domain name]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729121858.16897-2-anshuman.gupta@intel.com

drm/i915/display: remove explicit CNL handling from intel_display_power.c

The only real platform with DISPLAY_VER == 10 is GLK. We don't need to
handle CNL explicitly in intel_display_power.c.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728215946.1573015-14-lucas.demarchi@intel.com

drm/i915/dg2: Wait for SNPS PHY calibration during display init

Initialization of the PHY is handled by the hardware/firmware, but the
driver should wait up to 25ms for the PHY to report that its calibration
has completed.

Bspec: 49189
Bspec: 50107
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723174239.1551352-28-matthew.d.roper@intel.com

drm/i915/dg2: Don't program BW_BUDDY registers

Although the BW_BUDDY registers still exist, they are not used for
anything on DG2. This change is expected to hold true for future dgpu's
too.

Bspec: 49218
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-17-matthew.d.roper@intel.com

drm/i915/dg2: Don't wait for AUX power well enable ACKs

On DG2 we're supposed to just wait 600us after programming the well
before moving on; there won't be an ack from the hardware.

Bspec: 49296
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-14-matthew.d.roper@intel.com

drm/i915: Make display workaround upper bounds exclusive

Workarounds are documented in the bspec with an exclusive upper bound
(i.e., a "fixed" stepping that no longer needs the workaround). This
makes our driver's use of an inclusive upper bound for stepping ranges
confusing; the differing notation between code and bspec makes it very
easy for mistakes to creep in.

Let's switch the upper bound of our IS_{GT,DISP}_STEP macros over to use
an exclusive upper bound like the bspec does. This also has the benefit
of helping make sure workarounds are properly handled for new minor
steppings that show up (e.g., an A1 between the A0 and B0 we already
knew about) --- if the new intermediate stepping pulls in hardware fixes
early, there will be an update to the workaround definition which lets
us know we need to change our code. If the new stepping does not pull a
hardware fix earlier, then the new stepping will already be captured
properly by the "[begin, fix)" range in the code.

We'll probably need to be extra vigilant in code review of new
workarounds for the near future to make sure developers notice the new
semantics of workaround bounds. But we just migrated a bunch of our
platforms from the IS_REVID bounds over to IS_{GT,DISP}_STEP, so people
are already adjusting to the new macros and now is a good time to make
this change too.

[mattrope: Split out display changes to apply through intel-next tree]
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717051426.4120328-8-matthew.d.roper@intel.com

drm/i915/rkl: Wa_1409767108 also applies to RKL

Bspec: 53273
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717051426.4120328-6-matthew.d.roper@intel.com

drm/i915/dg1: Use revid->stepping tables

Switch DG1 to use a revid->stepping table as we're trying to do on all
platforms going forward.

This removes the last use of IS_REVID() and REVID_FOREVER, so remove
those now-unused macros as well to prevent their accidental use on
future platforms.

v2:
- Use COMMON_STEP() macro in table. (Anusha)

Bspec: 44463
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-11-matthew.d.roper@intel.com

drm/i915/display/xelpd: Extend Wa_14011508470

This workaround is also applicable to xelpd display so extending it.

Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713003854.143197-6-jose.souza@intel.com

drm/i915: Limit Wa_22010178259 to affected platforms

This workaround is not needed for platforms with display 13.

Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713003854.143197-5-jose.souza@intel.com

drm/i915/xelpd: Pipe A DMC plugging

This patch adds Pipe A plumbing to the already
existing parsing and loading functions which is
taken care of in the prep patches. Adding MAX_DMC_FW
to keep track for both Main and Pipe A DMC while loading
the respective blobs.

Also adding present field in dmc_info.
s/find_dmc_fw_offset/csr_set_dmc_fw_offset. While at it add
fw_info_matches_stepping() helper. CSR_PROGRAM() should now
take the starting address of the particular blob (Main or Pipe)
and not hardcode it.

v2: Add dmc_offset and start_mmioaddr fields for dmc_info struct.

v3: Add a missing corner cases of stepping-substepping combination in
fw_info_matches_stepping() helper.

v4: Add macro for start_mmioaddr for V1 package. Simplify code
in dmc_set_fw_offset (Lucas)

Cc: Souza, Jose <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210621191415.29823-3-anusha.srivatsa@intel.com

drm/i915: Tweaked Wa_14010685332 for all PCHs

dispcnlunit1_cp_xosc_clkreq clock observed to be active on TGL-H platform
despite Wa_14010685332 original sequence,
thus blocks entry to deeper s0ix state.

The Tweaked Wa_14010685332 sequence fixes this issue, therefore use tweaked
Wa_14010685332 sequence for every PCH since PCH_CNP.

v2:
- removed RKL from comment and simplified condition. [Rodrigo]

Fixes: b896898c7369 ("drm/i915: Tweaked Wa_14010685332 for PCHs used on gen11 platforms")
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210810113112.31739-2-anshuman.gupta@intel.com
(cherry picked from commit 8b46cc6577f4bbef7e5909bb926da31d705f350f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/display: remove duplicated argument

Fix the following coccicheck warning:

./drivers/gpu/drm/i915/display/intel_display_power.c:3081:1-28:
duplicated argument to & or |

This commit fixes duplicate argument. It might be a typo.
But what I can do is to remove it now.

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210605032209.16111-1-wanjiabing@vivo.com

drm/i915/adlp: Fix AUX power well -> PHY mapping

On ADL_P the power well->PHY mapping doesn't follow the mapping on previous
platforms, fix this up.

While at it remove the redundant dev_priv param from
icl_tc_phy_aux_ch().

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526143729.2563672-3-imre.deak@intel.com

drm/i915: Fix incorrect assert about pending power domain async-put work

It's possible that an already dequeued put_async_work() will release the
reference (*) that was put asynchronously after the dequeue happened.
This leaves an async-put work pending, without any reference to release.
A subsequent async-put may trigger the

drm_WARN_ON(!queue_delayed_work(&power_domains->async_put_work));

warn due to async_put_work() still pending. To avoid the warn, cancel
the pending async_put_work() when releasing the reference at (*) above.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3421
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2289
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526143729.2563672-2-imre.deak@intel.com

drm/i915/dmc: Add intel_dmc_has_payload() helper

We check for dmc_payload being there at various points in the driver.
Replace it with the helper.

v2: rebased.
v3: Move intel_dmc to intel_dmc.h in another patch (Lucas)
v4: Remove headers not needed from intel_dmc.h

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526220256.4097-3-anusha.srivatsa@intel.com

drm/i915/adlp: Add missing TBT AUX -> PW#2 power domain dependencies

On ADL_P the TBT AUX power wells depend on the PW#2 power well, add the
corresponding power domain dependencies.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526203456.2733040-1-imre.deak@intel.com

drm/i915/adl_p: Handle TC cold

On ADL-P TC cold is exited and blocked when legacy aux is powered,
that is exacly the same of what ICL need for static TC ports.

TODO: When a TBT hub or monitor is connected it will cause TBT and
legacy aux to be powered at the same time, hopefully this will not
cause any issues but if it do, some rework will be needed.

v2:
- skip icl_tc_port_assert_ref_held() warn on, adl-p uses aux to
block TC cold

v3:
- Drop icl_tc_port_assert_ref_held() earlier return for adl_p, not
needed anymore
- Set timeout_expected when enabling aux power well as port could be
disconnected when tc_cold_block() is called

BSpec: 55480
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210524214805.259692-2-jose.souza@intel.com

drm/i915/adl_p: Don't config MBUS and DBUF during display initialization

Alderlake-P don't have programing sequences for MBUS or DBUF during
display initializaiton, instead it requires programing to those
registers during modeset because it to depend on the pipes left
enabled.

Bspec: 49213
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-7-lucas.demarchi@intel.com

drm/i915/dmc: s/intel_csr.c/intel_dmc.c and s/intel_csr.h/intel_dmc.h

Finally, rename the header and source file from csr to dmc.

v2: Add file rename in Documentation.
- Place headers in orders. (Jani)

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210518213444.11420-6-anusha.srivatsa@intel.com

drm/i915/dmc: Rename functions names having "csr"

No functional change.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210518213444.11420-5-anusha.srivatsa@intel.com

drm/i915/dmc: Rename macro names containing csr

Rename all occurences of CSR_* with DMC_*

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210518213444.11420-4-anusha.srivatsa@intel.com

drm/i915/dmc: s/intel_csr/intel_dmc

No functional change.

v2: Chchpatch fixes.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210518213444.11420-2-anusha.srivatsa@intel.com

drm/i915/xelpd: Add Wa_14011503030

Cc: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210512042144.2089071-6-matthew.d.roper@intel.com

drm/i915/xelpd: Add XE_LPD power wells

Aside from the hardware-managed PG0, XE_LPD has power wells 1-2 and
A-D. These power wells should be enabled/disabled according to the
following dependency tree (enable top to bottom, disable bottom to top):

PG0
|
--PG1--
/ \
PGA --PG2--
/ | \
PGB PGC PGD

PWR_WELL_CTL follows the general ICL/TGL design and places PG A-D in the
bits that would have been PG 6-9 under the old scheme.

PWR_WELL_CTL_{DDI,AUX}'s bit indexing for DDI's A-C and TC1 is the same
as TGL, but DDI-D is placed at index 7 (bits 14 & 15).

v2:
- Squash in LPSP status patch from Uma since it's also a
powerwell-specific change.

Bspec: 49233
Bspec: 49503
Bspec: 49504
Bspec: 49505
Bspec: 49296
Bspec: 50090
Bspec: 53920
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210512042144.2089071-4-matthew.d.roper@intel.com

drm/i915: Don't include intel_de.h from intel_display_types.h

Hoist the intel_de.h include from intel_display_types.h one
level up. I need this in order to untangle the include order
so that I can add tracepoints into intel_de.h.

This little cocci script did most of the work for me:
@find@
@@
(
intel_de_read(...)
|
intel_de_read_fw(...)
|
intel_de_write(...)
|
intel_de_write_fw(...)
)

@has_include@
@@
(
#include "intel_de.h"
|
#include "display/intel_de.h"
)

@depends on find && !has_include@
@@
+ #include "intel_de.h"
#include "intel_display_types.h"

@depends on find && !has_include@
@@
+ #include "display/intel_de.h"
#include "display/intel_display_types.h"

Cc: Cooper Chiou <cooper.chiou@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430143945.6776-1-ville.syrjala@linux.intel.com

drm/i915: Add enabledisable()

'enable ? "enable" : "disable"' is a fairly common pattern in
our debug prints. Let's introduce a helper for it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416171011.19012-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Polish for_each_dbuf_slice()

Now that we have the dbuf slice mask stored in the device info
let's use it for for_each_dbuf_slice_in_mask*().

With this we cal also rip out intel_dbuf_size() and
intel_dbuf_num_slices().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416171011.19012-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Use intel_de_rmw() for DBUF_POWER_REQUEST

Use intel_de_rmw() instead of hand rolling it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416171011.19012-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Store dbuf slice mask in device info

Let's just store the dbuf slice information as a bitmask
in the device info. Makes life a little easier later.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416171011.19012-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Collect dbuf device info into a sub-struct

Collect the related dbuf information into a struct.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416171011.19012-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/display: rename display version macros

While converting the rest of the driver to use GRAPHICS_VER() and
MEDIA_VER(), following what was done for display, some discussions went
back on what we did for display:

1) Why is the == comparison special that deserves a separate
macro instead of just getting the version and comparing directly
like is done for >, >=, <=?

2) IS_DISPLAY_RANGE() is weird in that it omits the "_VER" for
brevity. If we remove the current users of IS_DISPLAY_VER(), we
could actually repurpose it for a range check

With (1) there could be an advantage if we used gen_mask since multiple
conditionals be combined by the compiler in a single and instruction and
check the result. However a) INTEL_GEN() doesn't use the mask since it
would make the code bigger everywhere else and b) in the cases it made
sense, it also made sense to convert to the _RANGE() variant.

So here we repurpose IS_DISPLAY_VER() to work with a [ from, to ] range
like was the IS_DISPLAY_RANGE() and convert the current IS_DISPLAY_VER()
users to use == and != operators. Aside from the definition changes,
this was done by the following semantic patch:

@@ expression dev_priv, E1; @@
- !IS_DISPLAY_VER(dev_priv, E1)
+ DISPLAY_VER(dev_priv) != E1

@@ expression dev_priv, E1; @@
- IS_DISPLAY_VER(dev_priv, E1)
+ DISPLAY_VER(dev_priv) == E1

@@ expression dev_priv, from, until; @@
- IS_DISPLAY_RANGE(dev_priv, from, until)
+ IS_DISPLAY_VER(dev_priv, from, until)

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
[Jani: Minor conflict resolve while applying.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210413051002.92589-4-lucas.demarchi@intel.com

drm/i915/display: Eliminate IS_GEN9_{BC,LP}

Now that we've eliminated INTEL_GEN(), IS_GEN_RANGE(), etc. from the
display code, we should also kill off our use of the IS_GEN9_* macros
too. We'll do the conversion manually this time instead of using
Coccinelle since the most logical substitution can depend heavily on the
code context, and sometimes we can keep the code simpler if we make
additional adjustments such as swapping the order of if/else arms.

v2:
- Restore a lost negation in intel_pll_is_valid().

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210407203945.1432531-1-matthew.d.roper@intel.com
(cherry picked from commit 70bfb30743d5da73058b0a2271e9c127a84fb494)
[Jani: cherry picked to topic branch to reduce conflicts]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: skip display initialization when there is no display

Display features should not be initialized or de-initialized when there
is no display. Skip modeset initialization, output setup, plane, crtc,
encoder, connector registration, display cdclk and rawclk
initialization, display core initialization, etc.

Skip the functionality at as high level as possible, and remove any
redundant checks. If the functionality is conditional to *other* display
checks, do not add more. If the un-initialization has checks for
initialization, do not add more.

We explicitly do not care about any GMCH/VLV/CHV code paths, as they've
always had and will have display.

Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210408203150.237947-3-jose.souza@intel.com

drm/i915: Do not set any power wells when there is no display

Power wells are only part of display block and not necessary when
running a headless driver.

Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210408203150.237947-2-jose.souza@intel.com

drm/i915/display: Eliminate IS_GEN9_{BC,LP}

Now that we've eliminated INTEL_GEN(), IS_GEN_RANGE(), etc. from the
display code, we should also kill off our use of the IS_GEN9_* macros
too. We'll do the conversion manually this time instead of using
Coccinelle since the most logical substitution can depend heavily on the
code context, and sometimes we can keep the code simpler if we make
additional adjustments such as swapping the order of if/else arms.

v2:
- Restore a lost negation in intel_pll_is_valid().

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210407203945.1432531-1-matthew.d.roper@intel.com

drm/i915: rename DISP_STEPPING->DISPLAY_STEP and GT_STEPPING->GT_STEP

Matter of taste. STEP matches the enums.

Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cf2dccd1c9c7fdcf5de08ea10a9265292b45d8c7.1616764798.git.jani.nikula@intel.com

drm/i915/display: Simplify GLK display version tests

GLK has always been a bit of a special case since it reports INTEL_GEN()
as 9, but has version 10 display IP. Now we can properly represent the
display version as 10 and simplify the display generation tests
throughout the display code.

Aside from manually adding the version to the glk_info structure, the
rest of this patch is generated with a Coccinelle semantic patch. Note
that we also need to switch any code that matches gen10 today but *not*
GLK to be CNL-specific:

@@ expression dev_priv; @@
- DISPLAY_VER(dev_priv) > 9
+ DISPLAY_VER(dev_priv) >= 10

@@ expression dev_priv, E; @@
(
- DISPLAY_VER(dev_priv) >= 10 && E
+ (DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv)) && E
|
- DISPLAY_VER(dev_priv) >= 10
+ DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv)
|
- IS_DISPLAY_RANGE(dev_priv, 10, E)
+ IS_DISPLAY_RANGE(dev_priv, 11, E) || IS_CANNONLAKE(dev_priv)
)

@@ expression dev_priv, E, E2; @@
(
- (IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv))
+ IS_DISPLAY_VER(dev_priv, 10)
|
- E || IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv)
+ E || IS_DISPLAY_VER(dev_priv, 10)
|
- (IS_GEMINILAKE(dev_priv) || IS_CANNONLAKE(dev_priv))
+ IS_DISPLAY_VER(dev_priv, 10)
|
- IS_GEMINILAKE(dev_priv) || E || IS_CANNONLAKE(dev_priv)
+ E || IS_DISPLAY_VER(dev_priv, 10)
|
- E || IS_GEMINILAKE(dev_priv) || E2 || IS_CANNONLAKE(dev_priv)
+ E || E2 || IS_DISPLAY_VER(dev_priv, 10)
|
- (IS_DISPLAY_VER(dev_priv, 10) || IS_GEMINILAKE(dev_priv))
+ IS_DISPLAY_VER(dev_priv, 10)
|
- (IS_GEMINILAKE(dev_priv) || IS_DISPLAY_VER(dev_priv, 10))
+ IS_DISPLAY_VER(dev_priv, 10)
)

@@ expression dev_priv; @@
- (IS_DISPLAY_VER(dev_priv, 9) && !IS_GEMINILAKE(dev_priv))
+ IS_DISPLAY_VER(dev_priv, 9)

@@ expression dev_priv; @@
(
- !(DISPLAY_VER(dev_priv) >= 11 || IS_DISPLAY_VER(dev_priv, 10))
+ DISPLAY_VER(dev_priv) < 10
|
- (DISPLAY_VER(dev_priv) >= 11 || IS_DISPLAY_VER(dev_priv, 10))
+ DISPLAY_VER(dev_priv) >= 10
)

@@ expression dev_priv, E; @@
- E || DISPLAY_VER(dev_priv) >= 11 || IS_DISPLAY_VER(dev_priv, 10)
+ E || DISPLAY_VER(dev_priv) >= 10

@@ expression dev_priv, E; @@
- (IS_DISPLAY_RANGE(dev_priv, 11, E) || IS_DISPLAY_VER(dev_priv, 10))
+ IS_DISPLAY_RANGE(dev_priv, 10, E)

@@ expression dev_priv; @@
(
- DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv) || IS_GEN9_LP(dev_priv)
+ DISPLAY_VER(dev_priv) >= 10 || IS_GEN9_LP(dev_priv)
|
- IS_GEN9_LP(dev_priv) || DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv)
+ IS_GEN9_LP(dev_priv) || DISPLAY_VER(dev_priv) >= 10
)

@@ expression dev_priv, E; @@
- !(DISPLAY_VER(dev_priv) >= E)
+ DISPLAY_VER(dev_priv) < E

v2:
- Convert gen10 conditions that don't include GLK into CNL conditions.
(Ville)

v3:
- Rework coccinelle rules so that "ver>=10" turns into "ver>=11||is_cnl." (Ville)

v3.1:
- Manually re-add the ".display.version = 10" to glk_info after
regenerating patch via Coccinelle.

v4:
- Also apply cocci rules to intel_pm.c and i915_irq.c! (CI)

Cc: Ville Syrjälä <ville.syrjala@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210322233840.4056851-1-matthew.d.roper@intel.com

drm/i915/display: Eliminate most usage of INTEL_GEN()

Use Coccinelle to convert most of the usage of INTEL_GEN() and IS_GEN()
in the display code to use DISPLAY_VER() comparisons instead. The
following semantic patch was used:

@@ expression dev_priv, E; @@
- INTEL_GEN(dev_priv) == E
+ IS_DISPLAY_VER(dev_priv, E)

@@ expression dev_priv; @@
- INTEL_GEN(dev_priv)
+ DISPLAY_VER(dev_priv)

@@ expression dev_priv; expression E; @@
- IS_GEN(dev_priv, E)
+ IS_DISPLAY_VER(dev_priv, E)

@@
expression dev_priv;
expression from, until;
@@
- IS_GEN_RANGE(dev_priv, from, until)
+ IS_DISPLAY_RANGE(dev_priv, from, until)

There are still some display-related uses of INTEL_GEN() in intel_pm.c
(watermark code) and i915_irq.c. Those will be updated separately.

v2:
- Use new IS_DISPLAY_RANGE and IS_DISPLAY_VER helpers. (Jani)

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-4-matthew.d.roper@intel.com

drm/i915/tgl+: Sanitize the DDI LANES/IO and AUX power domain names

In Bspec the TGL TypeC ports are TC1-6, the AUX power well request flags
are USBC1-6/TBT1-6, so for clarity use these names in the port power
domain names instead of the D-I terminology (which Bspec uses only for
the ICL TypeC ports).

A domain name should follow the <domain>_<pipe/transcoder/port/aux_ch>
format. Add the new aliases based on this, leaving a change to rename
all the rest accordingly for a follow-up.

No functional change.

v2: Add comment to commit log about unifying domain names. (Jose)

Cc: Souza Jose <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210222210400.940158-1-imre.deak@intel.com

drm/i915/display: Add DDR5 and LPDDR5 BW buddy page entries

Set the right BW buddy page mask for new memory types.

BSpec: 49218
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209174238.153278-1-jose.souza@intel.com

drm/i915/adl_s: Add display WAs for ADL-S

- Extend permanent driver WA Wa_1409767108, Wa_14010685332
and Wa_14011294188 to adl-s.
- Extend permanent driver WA Wa_1606054188 to adl-s.
- Add Wa_14011765242 for adl-s A0 stepping.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129182945.217078-8-aditya.swarup@intel.com

drm/i915/adl_s: Add power wells

TGL power wells can be re-used for ADL-S with the exception of the fake
power well for TC_COLD, just like DG-1.

BSpec: 53597
Bspec: 49231

Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129182945.217078-3-aditya.swarup@intel.com

drm/i915/tgl: Use TGL stepping info for applying WAs

TGL adds another level of indirection for applying WA based on stepping
information rather than PCI REVID. So change TGL_REVID enum into
stepping enum and use PCI REVID as index into revid to stepping table to
fetch correct display and GT stepping for application of WAs as
suggested by Matt Roper.

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119192931.1116500-1-lucas.demarchi@intel.com

drm/i915/pps: rename intel_power_sequencer_reset to intel_pps_reset_all

Follow the usual naming pattern for functions. "reset all" because it
iterates over all DP encoders. No functional changes.

Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b10013e2c976ca140b1ad62669e18a2e9f1e8c35.1610127741.git.jani.nikula@intel.com

drm/i915/pps: abstract panel power sequencer from intel_dp.c

In a long overdue refactoring, split out all panel sequencer code from
intel_dp.c to new intel_pps.[ch].

The first part is mostly just code movement as-is, without cleanups or
functional changes.

We need to add a vlv_get_dpll() helper to get at the vlv/chv dpll from
pps code.

v2: Rebase.

Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/14cc59d5734432ad976cd49ff8efce8fa413e5b2.1610127741.git.jani.nikula@intel.com

drm/i915: Make intel_display_power_put_unchecked() an internal-only function

All the display power domain references are wakeref tracked now, so we
can mark intel_display_power_put_unchecked() as an internal function
(for suppressing wakeref tracking in non-debug builds).

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130212200.2811939-10-imre.deak@intel.com

drm/i915: Track power reference taken to disable power well functionality

Add wakeref tracking for the display power domain reference taken to
keep the display power well functionality disabled.

v2: Add missing wakeref zeroing to intel_power_domains_driver_remove()

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201201161340.2879202-2-imre.deak@intel.com

drm/i915: Rename power_domains.wakeref to init_wakeref

Rename power_domains.wakeref to power_domains.init_wakeref to make the
use of this reference clearer. The next patch adds tracking for another
power reference user of the power_domains functionality.

While at it add a missing zero wakeref assert when setting the wakeref.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130212200.2811939-8-imre.deak@intel.com

drm/i915: Factor out helpers to get/put a set of tracked power domains

Factor out helper functions to get/put a set of power domains that are
tracked using their wakeref handles. The same is needed by the next
patch adding tracking for enabled CRTC power domains.

v2: s/uint64_t/u64/ (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201201161340.2879202-1-imre.deak@intel.com

drm/i915: Tweaked Wa_14010685332 for PCHs used on gen11 platforms

The WA specifies that we need to toggle a SDE chicken bit on and then
off as the final step in preparation for s0ix entry.

Bspec: 33450
Bspec: 8402

However, something is happening after we toggle the bit that causes
the WA to be invalidated. This makes dispcnlunit1_cp_xosc_clkreq
active being already in s0ix state i.e SLP_S0 counter incremented.
Tweaking the Wa_14010685332 by setting the bit on suspend and clearing
it on resume turns down the dispcnlunit1_cp_xosc_clkreq.
B.Spec has Documented this tweaked sequence of WA as an alternative.
Let keep this tweaked WA for Gen11 platforms and keep untweaked WA for
other platforms which never observed this issue.

v2 (MattR):
- Change the comment on the workaround to give PCH names rather than
platform names. Although the bspec is setup to list workarounds by
platform, the hardware team has confirmed that the actual issue being
worked around here is something that was introduced back in the
Cannon Lake PCH and carried forward to subsequent PCH's.
- Extend the untweaked version of the workaround to include PCH_CNP as
well. Note that since PCH_CNP is used to represent CMP, this will
apply on CML and some variants of RKL too.
- Cap the untweaked version of the workaround so that it won't apply to
"fake" PCH's (i.e., DG1). The issue we're working around really is
an issue in the PCH itself, not the South Display, so it shouldn't
apply when there isn't a real PCH.

v3:
- use intel_de_rmw(). [Rodrigo]

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201110121700.4338-1-anshuman.gupta@intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/display: Make get_allowed_dc_mask().max_dc set a chain of if and elses

Just following what we do in many other places, DG1 is a exception so
move it to the top instead of add it inside of INTEL_GEN(dev_priv) >= 12.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201111162408.98002-2-jose.souza@intel.com

drm/i915/display: Group DC9 mask set

DC9 has a separate HW flow from the rest of the DC states and it is
available in GEN9 LP platforms and on GEN11 and newer, so here
moving the assignment of the mask to a single conditional block to
simplifly code.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201111162408.98002-1-jose.souza@intel.com

drm/i915: Reorder hpd init vs. display resume

Currently we call .hpd_irq_setup() directly just before display
resume, and follow it with another call via intel_hpd_init()
just afterwards. Assuming the hpd pins are marked as enabled
during the open-coded call these two things do exactly the
same thing (ie. enable HPD interrupts). Which even makes sense
since we definitely need working HPD interrupts for MST sideband
during the display resume.

So let's nuke the open-coded call and move the intel_hpd_init()
call earlier. However we need to leave the poll_init_work stuff
behind after the display resume as that will trigger display
detection while we're resuming. We don't want that trampling over
the display resume process. To make this a bit more symmetric
we turn this into a intel_hpd_poll_{enable,disable}() pair.
So we end up with the following transformation:
intel_hpd_poll_init() -> intel_hpd_poll_enable()
lone intel_hpd_init() -> intel_hpd_init()+intel_hpd_poll_disable()
.hpd_irq_setup()+resume+intel_hpd_init() -> intel_hpd_init()+resume+intel_hpd_poll_disable()

If we really would like to prevent all *long* HPD processing during
display resume we'd need some kind of software mechanism to simply
ignore all long HPDs. Currently we appear to have that just for
fbdev via ifbdev->hpd_suspended. Since we aren't exploding left and
right all the time I guess that's mostly sufficient.

For a bit of history on this, we first got a mechanism to block
hotplug processing during suspend in commit 15239099d7a7 ("drm/i915:
enable irqs earlier when resuming") on account of moving the irq enable
earlier. This then got removed in commit 50c3dc970a09 ("drm/fb-helper:
Fix hpd vs. initial config races") because the fdev initial config
got pushed to a later point. The second ad-hoc hpd_irq_setup() for
resume was added in commit 0e32b39ceed6 ("drm/i915: add DP 1.2 MST
support (v0.7)") to be able to do MST sideband during the resume.
And finally we got a partial resurrection of the hpd blocking
mechanism in commit e8a8fedd57fd ("drm/i915: Block fbdev HPD
processing during suspend"), but this time it only prevent fbdev
from handling hpd while resuming.

v2: Leave the poll_init_work behind
v3: Remove the extra intel_hpd_poll_disable() from display reset (Lyude)
Add the missing intel_hpd_poll_disable() to display init (Imre)

Cc: Lyude Paul <lyude@redhat.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201013181137.30560-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/i915/display: Program DBUF_CTL tracker state service

This sequence is not part of "Sequences to Initialize Display" but
as noted in the MBus page the DBUF_CTL.Tracker_state_service needs
to be set to 8.

BSpec: 49213
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201019173906.18892-1-jose.souza@intel.com

drm/i915/dg1: DG1 does not support DC6

DC6 is not supported on DG1, so change the allowed DC mask for DG1.
This is not yet on bspec, but it has been confirmed by HW engineers.

Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201014191937.1266226-9-lucas.demarchi@intel.com

drm/i915/dg1: Add initial DG1 workarounds

DG1 shares some workarounds with TGL and RKL and also has some
additional workarounds of its own.

v2: Correct location of Wa_1408615072 (JohnH).
v3: Apply WAs 1606700617, 18011464164 and 22010931296 to DG1 (José)
v4 (Anusha)
- Add Wa_22010271021
- s/Wa_14010096844/Wa_1409836686
v5:
- Extend Wa_14010919138 to all revs (Matt Atwood)
- Power gate media is global gen12 design. (Rodrigo)
- Rebase (Lucas)
v6: use REG_BIT() to fix checkpatch warning (Lucas)

BSpec: 53508

Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201014191937.1266226-8-lucas.demarchi@intel.com

drm/i915/dg1: Add DG1 power wells

TGL power wells can be re-used for DG1 with the exception of the fake
power well for TC_COLD.

v2: use logic to skip power wells while copying instead of duplicating
the definition of TGL power wells (Matt Roper)

Bspec: 49182

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201014191937.1266226-3-lucas.demarchi@intel.com

drm/i915/cnl: skip PW_DDI_F on certain skus

The skus guarded by IS_CNL_WITH_PORT_F() have port F and thus they need
those power wells. The others don't have those. Up to now we were
just overriding the number of power wells on !IS_CNL_WITH_PORT_F(),
relying on those power wells to be the last ones. Now that we have logic
in place to skip power wells by id, use it instead.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201014191937.1266226-2-lucas.demarchi@intel.com

drm/i915/display: allow to skip certain power wells

This allows us to skip power wells on a platform allowing it to re-use
the table from another one instead of having to create a new table from
scratch that is basically a copy with a few removals.

Cc: Imre Deak <imre.deak@intel.com>
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
[ Adapt ignore logic to be based on pw id rather than adding a new
field, as suggested by Imre ]
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201014191937.1266226-1-lucas.demarchi@intel.com

drm/i915/tgl: Fix stepping WA matching

TGL made stepping a litte mess, workarounds refer to the stepping of
the IP(GT or Display) not of the GPU stepping so it would already
require the same solution as used in commit 96c5a15f9f39
("drm/i915/kbl: Fix revision ID checks").
But to make things even more messy it have a different IP stepping
mapping between SKUs and the same stepping revision of GT do not match
the same HW between TGL U/Y and regular TGL.

So it was required to have 2 different macros to check GT WAs while
for Display we are able to use just one macro that uses the right
revids table.

All TGL workarounds checked and updated accordingly.

v2:
- removed TODO to check if WA 14010919138 applies to regular TGL.
- fixed display stepping in regular TGL (Anusha)

BSpec: 52890
BSpec: 55378
BSpec: 44455
Reviewed-by: Anusha Srivatsa <anusha.srivtsa@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Penne Lee <penne.y.lee@intel.com>
Cc: Guangyao Bai <guangyao.bai@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200827233943.400946-1-jose.souza@intel.com

drm/i915/tgl: Make sure TC-cold is blocked before enabling TC AUX power wells

The dependency between power wells is determined by the ordering of the
power well list: when enabling the power wells for a domain, this
happens walking the power well list forward, while disabling them
happens in the reverse direction. Accordingly a power well on the list
must follow any other power well it depends on.

Since the TC AUX power wells depend on TC-cold being blocked, move the
TC-cold off power well before all AUX power wells.

Fixes: 3c02934b24e3 ("drm/i915/tc/tgl: Implement TC cold sequences")
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720232952.16228-1-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit b302a2e68807604af2a5015816c1d117747989b6)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Update bw_buddy pagemask table

A recent bspec update removed the LPDDR4 single channel entry from the
buddy register table, but added a new four-channel entry.

Workaround 1409767108 hasn't been updated with any guidance for four
channel configurations, so we leave that alternate table unchanged for
now.

Bspec 49218
Fixes: 3fa01d642fa7 ("drm/i915/tgl: Program BW_BUDDY registers during display init")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612204734.3674650-1-matthew.d.roper@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit ecb40d0826fda213ebb58d49e7d5b4752480e130)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/tgl: Fix TC-cold block/unblock sequence

The command register is the PCODE MBOX low register not the high one as
described by the spec. This left the system with the TC-cold power state
being blocked all the time. Fix things by using the correct register.

Also to make sure we retry a request for at least 600usec, when the
PCODE MBOX command itself succeeded, but the TC-cold block command
failed, sleep for 1msec unconditionally after any fail.

The change was tested with JTAG register read of the HW/FW's actual
TC-cold state, which reported the expected states after this change.

Tested-by: Nivedita Swaminathan <nivedita.swaminathan@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200805150056.24248-1-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/tgl: Make sure TC-cold is blocked before enabling TC AUX power wells

The dependency between power wells is determined by the ordering of the
power well list: when enabling the power wells for a domain, this
happens walking the power well list forward, while disabling them
happens in the reverse direction. Accordingly a power well on the list
must follow any other power well it depends on.

Since the TC AUX power wells depend on TC-cold being blocked, move the
TC-cold off power well before all AUX power wells.

Fixes: 3c02934b24e3 ("drm/i915/tc/tgl: Implement TC cold sequences")
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720232952.16228-1-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Update bw_buddy pagemask table

A recent bspec update removed the LPDDR4 single channel entry from the
buddy register table, but added a new four-channel entry.

Workaround 1409767108 hasn't been updated with any guidance for four
channel configurations, so we leave that alternate table unchanged for
now.

Bspec 49218
Fixes: 3fa01d642fa7 ("drm/i915/tgl: Program BW_BUDDY registers during display init")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612204734.3674650-1-matthew.d.roper@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Implement WA 14011294188

Although the WA description targets the platforms it is a workaround
for the affected PCHs, that is why it is being checked.

v2: excluding DG1 fake PCH from WA

BSpec: 52890
BSpec: 53273
BSpec: 52888
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727164729.28836-1-jose.souza@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/display: prefer dig_port to reference intel_digital_port

We have a mix of dport, intel_dport, intel_dig_port and dig_port to
reference a intel_digital_port struct. Numbers are around

5 intel_dport
36 dport
479 intel_dig_port
352 dig_port

Since we already removed the intel_ prefix from most of our other
structs, do the same here and prefer dig_port.

v2: rename everything in i915, not just a few display sources and
reword commit message (from Matt Roper)

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701045054.23357-1-lucas.demarchi@intel.com

drm/i915/gen12: implement Wa_14011508470

Update code to reflect recent bspec changes

Bspec: 52890
Bspec: 53508

Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200624215723.2316-1-matthew.s.atwood@intel.com

drm/i915/params: switch to device specific parameters

Start using device specific parameters instead of module parameters for
most things. The module parameters become the immutable initial values
for i915 parameters. The device specific parameters in i915->params
start life as a copy of i915_modparams. Any later changes are only
reflected in the debugfs.

The stragglers are:

* i915.force_probe and i915.modeset. Needed before dev_priv is
available. This is fine because the parameters are read-only and never
modified.

* i915.verbose_state_checks. Passing dev_priv to I915_STATE_WARN and
I915_STATE_WARN_ON would result in massive and ugly churn. This is
handled by not exposing the parameter via debugfs, and leaving the
parameter writable in sysfs. This may be fixed up in follow-up work.

* i915.inject_probe_failure. Only makes sense in terms of the module,
not the device. This is handled by not exposing the parameter via
debugfs.

v2: Fix uc i915 lookup code (Michał Winiarski)

Cc: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com>
Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200618150402.14022-1-jani.nikula@intel.com

drm/i915/rkl: RKL uses ABOX0 for pixel transfers

Rocket Lake uses the same 'abox0' mechanism to handle pixel data
transfers from memory that gen11 platforms used, rather than the
abox1/abox2 interfaces used by TGL/DG1. For the most part this is a
hardware implementation detail that's transparent to driver software,
but we do have to program a couple of tuning registers (MBUS_ABOX_CTL
and BW_BUDDY registers) according to which ABOX instances are used by a
platform. Let's track the platform's ABOX usage in the device info
structure and use that to determine which instances of these registers
to program.

As an exception to this rule is that even though TGL/DG1 use ABOX1+ABOX2
for data transfers, we're still directed to program the ABOX_CTL
register for ABOX0; so we'll handle that as a special case.

v2:
- Store the mask of platform-specific abox registers in the device
info structure.
- Add a TLB_REQ_TIMER() helper macro. (Aditya)

v3:
- Squash ABOX and BW_BUDDY patches together and use a single mask for
both of them, plus a special-case for programming the ABOX0 instance
on all gen12. (Ville)

Bspec: 50096
Bspec: 49218
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200606025740.3308880-2-matthew.d.roper@intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915/rkl: Add power well support

RKL power wells are similar to TGL power wells, but have some important
differences:

* PG1 now has pipe A's VDSC (rather than sticking it in PG2)
* PG2 no longer exists
* DDI-C (aka TC-1) moves from PG1 -> PG3
* PG5 no longer exists due to the lack of a fourth pipe

Also note that what we refer to as 'DDI-C' and 'DDI-D' need to actually
be programmed as TC-1 and TC-2 even though this platform doesn't have TC
outputs.

Bspec: 49234
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504225227.464666-9-matthew.d.roper@intel.com

drm/i915/display/display_power: Prefer drm_WARN_ON over WARN_ON

struct drm_device specific drm_WARN* macros include device information
in the backtrace, so we know what device the warnings originate from.

Prefer drm_WARN_ON over WARN_ON at places where struct i915_power_domains
struct is available.

Conversion is done with below sementic patch:

@@
identifier func, T;
@@
func(struct i915_power_domains *T,...) {
+ struct drm_i915_private *i915 = container_of(T, struct drm_i915_private, power_domains);
<+...
-WARN_ON(
+drm_WARN_ON(&i915->drm,
...)
...+>

}

changes since v1:
- Fix commit subject (Jani)

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504181600.18503-2-pankaj.laxminarayan.bharadiya@intel.com

drm/i915: Introduce proper dbuf state

Add a global state to track the dbuf slices. Gets rid of all the nasty
coupling between state->modeset and dbuf recomputation. Also we can now
totally nuke state->active_pipe_changes.

dev_priv->wm.distrust_bios_wm still remains, but that too will get
nuked soon.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225171125.28885-9-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915: Unify the low level dbuf code

The low level dbuf slice code is rather inconsitent with its
functiona naming and organization. Make it more consistent.

Also share the enable/disable functions between all platforms
since the same code works just fine for all of them.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225171125.28885-8-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915: Polish some dbuf debugs

Polish some of the dbuf code to give more meaningful debug
messages and whatnot. Also we can switch over to the per-device
debugs/warns at the same time.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225171125.28885-7-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915/icl: Fix timeout handling during TypeC AUX power well enabling

Fix the check for when an AUX power well enabling timeout is expected on
a legacy TypeC port.

Fixes: 89e01caac641 ("drm/i915: Use single set of AUX powerwell ops for gen11+")
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422123440.19522-1-imre.deak@intel.com

drm/i915: drop a bunch of superfluous inlines

Remove a number of inlines from .c files, and let the compiler decide
what's best. There's more to do, but need to start somewhere, and need
to start setting the example.

Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420140438.14672-2-jani.nikula@intel.com

drm/i915: Use single set of AUX powerwell ops for gen11+

AUX power wells sometimes need additional handling besides just
programming the specific power well registers:
* Type-C PHY's also require additional Type-C register programming
* ICL combo PHY's require additional workarounds
* TGL & EHL combo PHY's can be treated like any other power well

Today we have dedicated aux ops for the ICL combo PHY and Type-C cases.
This works fine, but means that when a new platform shows up with
identical general power well handling, but different types of PHYs on
its outputs, we have to define an entire new power well table for that
platform and can't just re-use the table from the earlier platform -- as
an example, see ehl_power_wells[], which is a subset of
icl_power_wells[], *except* that we need to specify different AUX ops
for the third display.

If we instead create a single set of top-level aux ops that will check
the PHY type and then dispatch to the appropriate handlers, we can get
more reuse out of our power well definitions. This allows us to
immediately eliminate ehl_power_wells[] and simply reuse the ICL table;
if future platforms follow the same general power well assignments as
either ICL or TGL, we'll be able to re-use those tables in the same way.

Note that I've only changed ICL+ platforms over to using the new icl_aux
ops; at this point it's unlikely that we'll have any new platforms that
re-use gen9 or earlier power well configurations.

v2:
- ICL_AUX_PW_TO_PHY() won't return the proper PHY for TBT AUX power
wells. But we know those wells will only used on Type-C outputs
anyway, so we can just check is is_tc_tbt flag in the condition.
(Jose).

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415233435.3064257-2-matthew.d.roper@intel.com

drm/i915/tgl: TBT AUX should use TC power well ops

As on ICL, we want to use the Type-C aux handlers for the TBT aux wells
to ensure the DP_AUX_CH_CTL_TBT_IO flag is set properly.

Fixes: 656409bbaf87 ("drm/i915/tgl: Add power well support")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415233435.3064257-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit 3cbdb97564a39020262e62b655e788b63cf426cb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Add ICL PG3 PW ID for EHL

Gen11 onwards PG3 contains functions for pipe B,
external displays, and VGA. Add missing ICL_DISP_PW_3
for ehl_power_wells.

Cc: Animesh Manna <animesh.manna@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1737
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417172835.15461-1-anshuman.gupta@intel.com

drm/i915/tc: Do not warn when aux power well of static TC ports timeout

This is a expected timeout of static TC ports not conneceted, so
not throwing warnings that would taint CI.

v3:
- moved checks to tc_phy_aux_timeout_expected()

v4:
- moved and add comments to tc_phy_aux_timeout_expected()

v5:
- only checking tc_legacy_port for TC ports

Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-8-jose.souza@intel.com

drm/i915/tc/tgl: Implement TC cold sequences

TC ports can enter in TCCOLD to save power and is required to request
to PCODE to exit this state before use or read to TC registers.

For TGL there is a new MBOX command to do that with a parameter to ask
PCODE to exit and block TCCOLD entry or unblock TCCOLD entry.

So adding a new power domain to reuse the refcount and only allow
TC cold when all TC ports are not in use.

v2:
- fixed missing case in intel_display_power_domain_str()
- moved tgl_tc_cold_request to intel_display_power.c
- renamed TGL_TC_COLD_OFF to TGL_TC_COLD_OFF_POWER_DOMAINS
- added all TC and TBT aux power domains to
TGL_TC_COLD_OFF_POWER_DOMAINS

v3:
- added one msec sleep when PCODE returns -EAGAIN
- added timeout of 5msec to not loop forever if
sandybridge_pcode_write_timeout() keeps returning -EAGAIN

v4:
- Made failure to block or unblock TC cold a error
- removed 5msec timeout, instead giving PCODE 1msec by up 3 times to
recover from the internal error

v5:
- only sleeping 1msec when ret is -EAGAIN

BSpec: 49294
Cc: Imre Deak <imre.deak@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-6-jose.souza@intel.com

drm/i915/tc: Skip ref held check for TC legacy aux power wells

As part of ICL TC cold exit sequences we need to request aux power
well before lock the access to TC ports, so skiping the
intel_tc_port_ref_held() check for TC legacy ports.

Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-5-jose.souza@intel.com

drm/i915/tc/icl: Implement TC cold sequences

This is required for legacy/static TC ports as IOM is not aware of
the connection and will not trigger the TC cold exit.

Just request PCODE to exit TCCOLD is not enough as it could enter
again before driver makes use of the port, to prevent it BSpec states
that aux powerwell should be held.

So here embedding the TC cold exit sequence into ICL aux enable,
it will enable aux and then request TC cold to exit.

The TC cold block(exit and aux hold) and unblock was added to some
exported TC functions for the others and to access PHY registers,
callers should enable and keep aux powerwell enabled during access.

Also adding TC cold check and warnig in tc_port_load_fia_params() as
at this point of the driver initialization we can't request power
wells, if we get this warning we will need to figure out how to handle
it.

v2:
- moved ICL TC cold exit function to intel_display_power
- using dig_port->tc_legacy_port to only execute sequences for legacy
ports, hopefully VBTs will have this right
- fixed check to call _hsw_power_well_continue_enable()
- calling _hsw_power_well_continue_enable() unconditionally in
icl_tc_phy_aux_power_well_enable(), if needed we will surpress timeout
warnings of TC legacy ports
- only blocking TC cold around fia access

v3:
- added timeout of 5msec to not loop forever if
sandybridge_pcode_write_timeout() keeps returning -EAGAIN
returning -EAGAIN in in icl_tc_cold_exit()
- removed leftover tc_cold_wakeref
- added one msec sleep when PCODE returns -EAGAIN

v4:
- removed 5msec timeout, instead giving 1msec to whoever is using
PCODE to finish it up to 3 times
- added a comment about turn TC cold exit failure as a error in future

BSpec: 21750
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1296
Cc: Imre Deak <imre.deak@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-4-jose.souza@intel.com

drm/i915/display: Split hsw_power_well_enable() into two

This is a preparation for ICL TC cold exit sequences.

v2:
- renamed new functions to hsw_power_well_enable_prepare()/complete()

Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-3-jose.souza@intel.com

drm/i915/display: Move out code to return the digital_port of the aux ch

Moving the code to return the digital port of the aux channel also
removing the intel_phy_is_tc() to make it generic.
digital_port will be needed in icl_tc_phy_aux_power_well_enable()
so adding it as a parameter to icl_tc_port_assert_ref_held().

While at at removing the duplicated call to icl_tc_phy_aux_ch() in
icl_tc_port_assert_ref_held().

v2:
- fixed build when DRM_I915_DEBUG_RUNTIME_PM is not set
- moved to before hsw_wait_for_power_well_enable() as it will be
needed by hsw_wait_for_power_well_enable() in a future patch

v4:
- fixed action of if (!dig_port), continue instead of return

Cc: You-Sheng Yang <vicamo@gmail.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-1-jose.souza@intel.com

drm/i915: Power well id for ICL PG3

Gen11 onwards PG3 is contains functions for pipe B,
external displays, and VGA. It make sense to add
a power well id with name ICL_DISP_PW_3 rather then
TGL_DISP_PW_3, Also PG3 power well id requires to
know if lpsp is enabled.

Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415170555.15531-2-anshuman.gupta@intel.com

drm/i915/tgl: TBT AUX should use TC power well ops

As on ICL, we want to use the Type-C aux handlers for the TBT aux wells
to ensure the DP_AUX_CH_CTL_TBT_IO flag is set properly.

Fixes: 656409bbaf87 ("drm/i915/tgl: Add power well support")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415233435.3064257-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915/tgl: Extend Wa_1409767108:tgl to B0 stepping

Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414211118.2787489-2-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915/display_power: use struct drm_device based logging

Convert all the DRM_* logging macros to the struct drm_device based
macros to provide device specific logging.

No functional changes.

Generated using the following semantic patch, originally written by
Wambui Karuga <wambui.karugax@gmail.com>, with manual fixups on top:

@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

Cc: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/25e56d1b7df3b1e91024eb969fb839fdcbdcb35e.1584714939.git.jani.nikula@intel.com

drm/i915/tgl: Add Wa_22010178259:tgl

We need to explicitly set the TLB Request Timer initial value in the
BW_BUDDY registers to 0x8 rather than relying on the hardware default.

v2: Apply missing REG_FIELD_PREP to ensure 0x8 is placed in the correct
bits during the rmw. (Jose)

Bspec: 52890
Bspec: 50044
Fixes: 3fa01d642fa7 ("drm/i915/tgl: Program BW_BUDDY registers during display init")
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200219215655.2923650-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit 87e04f75928bb5d357ef7df4eedc1a7e2761a833)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228004320.127142-2-matthew.d.roper@intel.com

drm/i915: Program MBUS with rmw during initialization

It wasn't terribly clear from the bspec's wording, but after discussion
with the hardware folks, it turns out that we need to preserve the
pre-existing contents of the MBUS ABOX control register when
initializing a few specific bits.

Bspec: 49213
Bspec: 50096
Fixes: 4cb4585e5a7f ("drm/i915/icl: initialize MBus during display init")
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200204011032.582737-1-matthew.d.roper@intel.com
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
(cherry picked from commit 837b63e6087838d0f1e612d448405419199d8033)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228004320.127142-1-matthew.d.roper@intel.com

drm/i915/tgl: Allow DC5/DC6 entry while PG2 is active

On gen12, we no longer need to disable DC5/DC6 when when PG2 is in use
(which translates to cases where we're using VDSC on pipe A).

Bspec: 49193
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200220231843.3127468-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915/display/power: Make WARN* drm specific where drm_priv ptr is available

drm specific WARN* calls include device information in the
backtrace, so we know what device the warnings originate from.

Covert all the calls of WARN* with device specific drm_WARN*
variants in functions where drm_i915_private struct pointer is
readily available.

The conversion was done automatically with below coccinelle semantic
patch. checkpatch errors/warnings are fixed manually.

@rule1@
identifier func, T;
@@
func(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-WARN(
+drm_WARN(&T->drm,
...)
|
-WARN_ON(
+drm_WARN_ON(&T->drm,
...)
|
-WARN_ONCE(
+drm_WARN_ONCE(&T->drm,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(&T->drm,
...)
)
...+>
}

@rule2@
identifier func, T;
@@
func(struct drm_i915_private *T,...) {
<+...
(
-WARN(
+drm_WARN(&T->drm,
...)
|
-WARN_ON(
+drm_WARN_ON(&T->drm,
...)
|
-WARN_ONCE(
+drm_WARN_ONCE(&T->drm,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(&T->drm,
...)
)
...+>
}

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200220165507.16823-5-pankaj.laxminarayan.bharadiya@intel.com

drm/i915/tgl: Add Wa_22010178259:tgl

We need to explicitly set the TLB Request Timer initial value in the
BW_BUDDY registers to 0x8 rather than relying on the hardware default.

v2: Apply missing REG_FIELD_PREP to ensure 0x8 is placed in the correct
bits during the rmw. (Jose)

Bspec: 52890
Bspec: 50044
Fixes: 3fa01d642fa7 ("drm/i915/tgl: Program BW_BUDDY registers during display init")
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200219215655.2923650-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915/tgl: Program MBUS_ABOX{1,2}_CTL during display init

On gen11 we only needed to program MBus credits into MBUS_ABOX_CTL
during display initialization, but on gen12 we're now supposed to
program the same values into MBUS_ABOX1_CTL and MBUS_ABOX2_CTL as well.

v2:
- Program registers with rmw to preserve contents of unrelated bits.
- Switch to the new display uncore helpers.

Bspec: 49213
Bspec: 50096
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200204011032.582737-2-matthew.d.roper@intel.com
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>

drm/i915: Program MBUS with rmw during initialization

It wasn't terribly clear from the bspec's wording, but after discussion
with the hardware folks, it turns out that we need to preserve the
pre-existing contents of the MBUS ABOX control register when
initializing a few specific bits.

Bspec: 49213
Bspec: 50096
Fixes: 4cb4585e5a7f ("drm/i915/icl: initialize MBus during display init")
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200204011032.582737-1-matthew.d.roper@intel.com
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>

drm/i915: Read rawclk_freq earlier

Read the rawclk_freq during runtime info probing, prior to its first use
in computing the CS timestamp frequency. Then store it in the runtime
info, and include it in the debug printouts.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/834
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200216163445.555786-1-chris@chris-wilson.co.uk

drm/i915: Ensure no conflicts with BIOS when updating Dbuf

TGL BIOS seems to enable both DBuf slices ocasionally, depending
how many displays are connected, while i915 according to BSpec
was powering on S1 DBuf slice, until a modeset was done.

This was causing a brief flash during the boot as we were
disabling slice, previously used by BIOS with that.

To prevent this, now we are ensuring tht we are enabling
_at least_ one slice, but if there are more, let's not
power them off.

Fixes: ff2cd8635e41 ("drm/i915: Correctly map DBUF slices to pipes")
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200213140412.32697-2-stanislav.lisovskiy@intel.com

drm/i915: Manipulate DBuf slices properly

Start manipulating DBuf slices as a mask,
but not as a total number, as current approach
doesn't give us full control on all combinations
of slices, which we might need(like enabling S2
only can't enabled by setting enabled_slices=1).

Removed wrong code from intel_get_ddb_size as
it doesn't match to BSpec. For now still just
use DBuf slice until proper algorithm is implemented.

Other minor code refactoring to get prepared
for major DBuf assignment changes landed:
- As now enabled slices contain a mask
we still need some value which should
reflect how much DBuf slices are supported
by the platform, now device info contains
num_supported_dbuf_slices.
- Removed unneeded assertion as we are now
manipulating slices in a more proper way.

v2: Start using enabled_slices in dev_priv

v3: "enabled_slices" is now "enabled_dbuf_slices_mask",
as this now sits in dev_priv independently.

v4: - Fixed debug print formatting to hex(Matt Roper)
- Optimized dbuf slice updates to be used only
if slice union is different from current conf(Matt Roper)
- Fixed some functions to be static(Matt Roper)
- Created a parameterized version for DBUF_CTL to
simplify DBuf programming cycle(Matt Roper)
- Removed unrequred field from GEN10_FEATURES(Matt Roper)

v5: - Removed redundant programming dbuf slices helper(Ville Syrjälä)
- Started to use parameterized loop for hw readout to get slices
(Ville Syrjälä)
- Added back assertion checking amount of DBUF slices enabled
after DC states 5/6 transition, also added new assertion
as starting from ICL DMC seems to restore the last DBuf
power state set, rather than power up all dbuf slices
as assertion was previously expecting(Ville Syrjälä)

v6: - Now using enum for DBuf slices in this patch (Ville Syrjälä)
- Removed gen11_assert_dbuf_enabled and put gen9_assert_dbuf_enabled
back, as we really need to have a single unified assert here
however currently enabling always slice 1 is enforced by BSpec,
so we will have to OR enabled slices mask with 1 in order
to be consistent with BSpec, that way we can unify that
assertion and against the actual state from the driver, but
not some hardcoded value.(concluded with Ville)
- Remove parameterized DBUF_CTL version, to extract it to another
patch.(Ville Syrjälä)
v7:
- Removed unneeded hardcoded return value for older gens from
intel_enabled_dbuf_slices_mask - this now is handled in a
unified manner since device info anyway returns max dbuf slices
as 1 for older platforms(Matthew Roper)
- Now using INTEL_INFO(dev_priv)->num_supported_dbuf_slices instead
of intel_dbuf_max_slices function as it is trivial(Matthew Roper)

v8: - Fixed icl_dbuf_disable to disable all dbufs still(Ville Syrjälä)

v9: - Renamed _DBUF_CTL_S to DBUF_CTL_S(Ville Syrjälä)
- Now using power_domain mutex to protect from race condition, which
can occur because intel_dbuf_slices_update might be running in
parallel to gen9_dc_off_power_well_enable being called from
intel_dp_detect for instance, which causes assertion triggered by
race condition, as gen9_assert_dbuf_enabled might preempt this
when registers were already updated, while dev_priv was not.

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202230630.8975-6-stanislav.lisovskiy@intel.com

drm/i915: Introduce parameterized DBUF_CTL

Now start using parameterized DBUF_CTL instead
of hardcoded, this would allow shorter access
functions when reading or storing entire state.

Tried to implement it in a MMIO_PIPE manner, however
DBUF_CTL1 address is higher than DBUF_CTL2, which
implies that we have to now subtract from base
rather than add.

v2: - Removed unneeded DBUF_CTL_DIST and DBUF_CTL_ADDR
macros. Started to use _PICK construct as suggested
by Matt Roper.

v3: - _DBUF_CTL_S* to DBUF_CTL_S*, changed X to "slice"
in macro(Ville Syrjälä)
- Introduced enum for enumerating DBUF slices(Ville Syrjälä)

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202230630.8975-5-stanislav.lisovskiy@intel.com

drm/i915: Remove skl_ddl_allocation struct

Current consensus that it is redundant as
we already have skl_ddb_values struct out there,
also this struct contains only single member
which makes it unnecessary.

v2: As dirty_pipes soon going to be nuked away
from skl_ddb_values, evacuating enabled_slices
to safer in dev_priv.

v3: Changed "enabled_slices" to be "enabled_dbuf_slices_num"
(Matt Roper)

v4: - Wrapped the line getting number of dbuf slices(Matt Roper)
- Removed indeed redundant skl_ddb_values declaration(Matt Roper)

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202230630.8975-2-stanislav.lisovskiy@intel.com

drm/i915/display: Defer application of initial chv_phy_control

To write to the DISPLAY_PHY_CONTROL requires holding the powerwells,
which during early resume we have not yet acquired until later in
intel_display_power_init_hw(). So compute the initial chv_phy_control,
but leave the HW unset until we first acquire the powerwell.

<7> [120.055984] i915 0000:00:02.0: [drm:intel_power_domains_init_hw [i915]] rawclk rate: 200000 kHz
<4> [120.056381] ------------[ cut here ]------------
<4> [120.056621] i915 0000:00:02.0: Unclaimed write to register 0x1e0100
<4> [120.056924] WARNING: CPU: 1 PID: 164 at drivers/gpu/drm/i915/intel_uncore.c:1166 __unclaimed_reg_debug+0x69/0x80 [i915]
<4> [120.056935] Modules linked in: vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic btusb btrtl btbcm btintel i915 bluetooth coretemp crct10dif_pclmul crc32_pclmul snd_hda_intel snd_intel_dspcfg snd_hda_codec ghash_clmulni_intel snd_hwdep ecdh_generic ecc snd_hda_core r8169 snd_pcm lpc_ich realtek pinctrl_cherryview i2c_designware_pci prime_numbers
<4> [120.057027] CPU: 1 PID: 164 Comm: kworker/u4:3 Tainted: G U 5.5.0-CI-CI_DRM_7854+ #1
<4> [120.057038] Hardware name: /NUC5CPYB, BIOS PYBSWCEL.86A.0055.2016.0812.1130 08/12/2016
<4> [120.057058] Workqueue: events_unbound async_run_entry_fn
<4> [120.057275] RIP: 0010:__unclaimed_reg_debug+0x69/0x80 [i915]
<4> [120.057289] Code: 48 8b 78 18 48 8b 5f 50 48 85 db 74 2d e8 1f a0 3f e1 45 89 e8 48 89 e9 48 89 da 48 89 c6 48 c7 c7 00 8c 48 a0 e8 67 82 df e0 <0f> 0b 83 2d ce e2 2b 00 01 5b 5d 41 5c 41 5d c3 48 8b 1f eb ce 66
<4> [120.057301] RSP: 0018:ffffc90000bcfd08 EFLAGS: 00010082
<4> [120.057315] RAX: 0000000000000000 RBX: ffff888079919b60 RCX: 0000000000000003
<4> [120.057326] RDX: 0000000080000003 RSI: 0000000000000000 RDI: 00000000ffffffff
<4> [120.057336] RBP: ffffffffa04c9f4e R08: 0000000000000000 R09: 0000000000000001
<4> [120.057348] R10: 0000000025c3d560 R11: 000000006815f798 R12: 0000000000000000
<4> [120.057359] R13: 00000000001e0100 R14: 0000000000000286 R15: ffffffff8234a76b
<4> [120.057371] FS: 0000000000000000(0000) GS:ffff888074b00000(0000) knlGS:0000000000000000
<4> [120.057382] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [120.057393] CR2: 000055f4197df0d8 CR3: 000000006f326000 CR4: 00000000001006e0
<4> [120.057404] Call Trace:
<4> [120.057635] fwtable_write32+0x114/0x1d0 [i915]
<4> [120.057892] intel_power_domains_init_hw+0x4ff/0x650 [i915]
<4> [120.058150] intel_power_domains_resume+0x3d/0x70 [i915]
<4> [120.058363] i915_drm_resume_early+0x97/0xd0 [i915]
<4> [120.058575] ? i915_resume_switcheroo+0x30/0x30 [i915]
<4> [120.058594] dpm_run_callback+0x64/0x280
<4> [120.058626] device_resume_early+0xa7/0xe0
<4> [120.058652] async_resume_early+0x14/0x40

v2: Write our expected value of DISPLAY_PHY_CONTROL during sync_hw, so
that it should always match the driver state after resume.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1089
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200203145016.216692-1-chris@chris-wilson.co.uk

drm/i915: s/init_cdclk/init_cdclk_hw/

Give the cdclk init/uninit functions a _hw suffix to make
it clear they are about initializing the actual hardware.
I'll be wanting to to add a intel_cdclk_init() which is
purely initializing software structures.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-12-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915: s/cdclk_state/cdclk_config/

I want to have a higher level cdclk state object so let's rename
the current lower level thing to cdclk_config (because I lack
imagination).

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-8-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915/display_power: use intel_de_*() functions for register access

The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().

Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().

No functional changes.

Generated using the following semantic patch:

@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)

@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)

@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)

@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)

@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)

Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/939ffbddf2879e21b9e449f1ae0b621640ecf7ff.1580149467.git.jani.nikula@intel.com

drm/i915/power: convert to struct drm_device macros in display/intel_display_power.c

Converts various instances of the printk based logging macros in
i915/display/intel_display_power.c to the struct drm_device based
logging macros using the following coccinelle script:
@rule1@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@rule2@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

Checkpatch warnings were fixed manually.

Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200122110844.2022-4-wambui.karugax@gmail.com

drm/i915: Pass intel_encoder to enc_to_*()

Lots of enc_to_foo(&encoder->base) around. Simplify by passing
in the intel_encoder instead.

@find@
identifier F =~ "^enc_to_.*";
identifier E;
@@
F(struct drm_encoder *E)
{
...
}

@@
identifier find.F;
identifier find.E;
@@
F(
- struct drm_encoder *E
+ struct intel_encoder *encoder
)
{
<...
- E
+ &encoder->base
...>
}

@@
identifier find.F;
expression E;
@@
- F(E)
+ F(to_intel_encoder(E))

@@
expression E;
@@
- to_intel_encoder(&E->base)
+ E

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191204180549.1267-4-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>

drm/i915/tgl: Drop Wa#1178

The TGL workaround database no longer shows Wa #1178 (or anything
similar under different workaround names/numbers) so we should be able
to drop it. In fact Swati just discovered that applying this workaround
is the root cause of some power well enable failures we've been seeing
in CI (gitlab issue 498).

Once we stop applying this WA, TGL no longer utilizes any of the special
handling provided by icl_combo_phy_aux_power_well_ops so we can just
drop back to using the standard hsw-style power well ops instead.

v3: Drop now-unused _TGL_AUX_ANAOVRD1_C definition too. (Lucas)

Closes: https://gitlab.freedesktop.org/drm/intel/issues/498
Fixes: deea06b47574 ("drm/i915/tgl: apply Display WA #1178 to fix type C dongles")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Swati Sharma <swati2.sharma@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213001511.678070-3-matthew.d.roper@intel.com
(cherry picked from commit ab3402581d0fa58e63e36875995f43ab02b4d0a0)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/ehl: Define EHL powerwells independently of ICL

Outputs C and D on EHL are combo PHY outputs and thus should not be
using the same TC AUX power well handlers as ICL. And even though
icl_combo_phy_aux_power_well_ops works okay for EHL/JSL combo PHYs none
of its special handling is actually necessary for this platform:
* EHL/JSL don't actually need to program PORT_CL_DW12
* Display WA #1178 does not apply to EHL/JSL

Thus we can simply drop back to using our standard "hsw-style" power
well ops for EHL AUX power wells.

Bspec: 4301
Fixes: f722b8c1e2a2 ("drm/i915/ehl: All EHL ports are combo phys")
Cc: Jose Souza <jose.souza@intel.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213001511.678070-2-matthew.d.roper@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit e8ab8d669d046a8e9b07707d2f00b9ba3e25d0ae)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/icl: Cleanup combo PHY aux power well handlers

Now that the combo PHY aux power well handlers are used exclusively on
Icelake, we can drop a bunch of the extra tests.

v2: Don't try to use intel_uncore_rmw for register updates yet; there's
pending display uncore patches that need to land first. (Lucas)

v3: Drop the combo phy assertion. It was backward before, but doesn't
seem terribly necessary. I'm keeping the IS_ICELAKE assertion
though since we often copy/paste/modify the power well tables when
defining new platforms and it's too easy to cargo cult the
ICL-specific handling to new platforms that shouldn't use it.
(Lucas)

v4: Fix build; forgot to commit all the changes. (CI)

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213010600.701315-1-matthew.d.roper@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/i915/tgl: Drop Wa#1178

The TGL workaround database no longer shows Wa #1178 (or anything
similar under different workaround names/numbers) so we should be able
to drop it. In fact Swati just discovered that applying this workaround
is the root cause of some power well enable failures we've been seeing
in CI (gitlab issue 498).

Once we stop applying this WA, TGL no longer utilizes any of the special
handling provided by icl_combo_phy_aux_power_well_ops so we can just
drop back to using the standard hsw-style power well ops instead.

v3: Drop now-unused _TGL_AUX_ANAOVRD1_C definition too. (Lucas)

Closes: https://gitlab.freedesktop.org/drm/intel/issues/498
Fixes: deea06b47574 ("drm/i915/tgl: apply Display WA #1178 to fix type C dongles")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Swati Sharma <swati2.sharma@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213001511.678070-3-matthew.d.roper@intel.com

drm/i915/ehl: Define EHL powerwells independently of ICL

Outputs C and D on EHL are combo PHY outputs and thus should not be
using the same TC AUX power well handlers as ICL. And even though
icl_combo_phy_aux_power_well_ops works okay for EHL/JSL combo PHYs none
of its special handling is actually necessary for this platform:
* EHL/JSL don't actually need to program PORT_CL_DW12
* Display WA #1178 does not apply to EHL/JSL

Thus we can simply drop back to using our standard "hsw-style" power
well ops for EHL AUX power wells.

Bspec: 4301
Fixes: f722b8c1e2a2 ("drm/i915/ehl: All EHL ports are combo phys")
Cc: Jose Souza <jose.souza@intel.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213001511.678070-2-matthew.d.roper@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/i915/tgl: Program BW_BUDDY registers during display init

Gen12 can improve bandwidth efficiency by pairing up memory requests
with similar addresses. We need to program the BW_BUDDY1 and BW_BUDDY2
registers according to the memory configuration during display
initialization to take advantage of this capability.

The magic numbers we program here feel like something that could
definitely change on future platforms, so let's use a table-based
programming scheme to make this easy to extend in the future.

v2:
- Add separate table for Wa_1409767108. (Stan)
- Reorder structure reduce size by a word. Page mask can still be up
to 28 bits (even though current values are small) so we should keep
it as a u32, but just using a u8 for DRAM type instead of the actual
enum type saves space. (Lucas, Ville)
- Rename function to tgl_bw_buddy_init() to be more precise about what
it does. (Lucas)

Bspec: 49189
Bspec: 49218
Bspec: 52890
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205224848.76712-1-matthew.d.roper@intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915: update rawclk also on resume

Since CNP it's possible for rawclk to have two different values, 19.2
and 24 MHz. If the value indicated by SFUSE_STRAP register is different
from the power on default for PCH_RAWCLK_FREQ, we'll end up having a
mismatch between the rawclk hardware and software states after
suspend/resume. On previous platforms this used to work by accident,
because the power on defaults worked just fine.

Update the rawclk also on resume. The natural place to do this would be
intel_modeset_init_hw(), however VLV/CHV need it done before
intel_power_domains_init_hw(). Thus put it there even if it feels
slightly out of place.

v2: Call intel_update_rawclck() in intel_power_domains_init_hw() for all
platforms (Ville).

Reported-by: Shawn Lee <shawn.c.lee@intel.com>
Cc: Shawn Lee <shawn.c.lee@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Shawn Lee <shawn.c.lee@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101142024.13877-1-jani.nikula@intel.com
(cherry picked from commit 59ed05ccdded5eb18ce012eff3d01798ac8535fa)
Cc: <stable@vger.kernel.org> # v4.15+
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: update rawclk also on resume

Since CNP it's possible for rawclk to have two different values, 19.2
and 24 MHz. If the value indicated by SFUSE_STRAP register is different
from the power on default for PCH_RAWCLK_FREQ, we'll end up having a
mismatch between the rawclk hardware and software states after
suspend/resume. On previous platforms this used to work by accident,
because the power on defaults worked just fine.

Update the rawclk also on resume. The natural place to do this would be
intel_modeset_init_hw(), however VLV/CHV need it done before
intel_power_domains_init_hw(). Thus put it there even if it feels
slightly out of place.

v2: Call intel_update_rawclck() in intel_power_domains_init_hw() for all
platforms (Ville).

Reported-by: Shawn Lee <shawn.c.lee@intel.com>
Cc: Shawn Lee <shawn.c.lee@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Shawn Lee <shawn.c.lee@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101142024.13877-1-jani.nikula@intel.com

drm/i915/tgl: Add AUX B & C to DC_OFF_POWER_DOMAINS

Our TGL CI platforms are running into cases where aux transactions have
failed to complete or declare a timeout well after the timeout limit
that the hardware is supposed to enforce. From the logs it appears that
these failures arise when aux transactions happen after we've entered
DC6:

<7> [622.523650] [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [622.523685] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
...
<3> [622.535753] [drm:intel_dp_aux_xfer [i915]] *ERROR* dp aux hw did not signal timeout!
<3> [622.547745] [drm:intel_dp_aux_xfer [i915]] *ERROR* dp aux hw did not signal timeout!
<3> [622.559746] [drm:intel_dp_aux_xfer [i915]] *ERROR* dp aux hw did not signal timeout!
<3> [622.571744] [drm:intel_dp_aux_xfer [i915]] *ERROR* dp aux hw did not signal timeout!
<3> [622.583743] [drm:intel_dp_aux_xfer [i915]] *ERROR* dp aux hw did not signal timeout!
<3> [622.583780] [drm:intel_dp_aux_xfer [i915]] *ERROR* dp_aux_ch not done status 0xad400bff
<7> [622.863725] [drm:drm_dp_dpcd_access] Too many retries, giving up. First error: -110

On TGL AUX B & C are in PG1 (managed by the DMC firmware) rather
than PG3 as they were on ICL, so allowing DC6 means the DMC firmware
might shut off the power wells behind our backs when we're trying to use
them.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191025230623.27829-6-matthew.d.roper@intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915/tgl: Switch between dc3co and dc5 based on display idleness

DC3CO is useful power state, when DMC detects PSR2 idle frame
while an active video playback, playing 30fps video on 60hz panel
is the classic example of this use case.

B.Specs:49196 has a restriction to enable DC3CO only for Video Playback.
It will be worthy to enable DC3CO after completion of each pageflip
and switch back to DC5 when display is idle because driver doesn't
differentiate between video playback and a normal pageflip.
We will use Frontbuffer flush call tgl_dc3co_flush() to enable DC3CO
state only for ORIGIN_FLIP flush call, because DC3CO state has primarily
targeted for VPB use case. We are not interested here for frontbuffer
invalidates calls because that triggers PSR2 exit, which will
explicitly disable DC3CO.

DC5 and DC6 saves more power, but can't be entered during video
playback because there are not enough idle frames in a row to meet
most PSR2 panel deep sleep entry requirement typically 4 frames.
As PSR2 existing implementation is using minimum 6 idle frames for
deep sleep, it is safer to enable DC5/6 after 6 idle frames
(By scheduling a delayed work of 6 idle frames, once DC3CO has been
enabled after a pageflip).

After manually waiting for 6 idle frames DC5/6 will be enabled and
PSR2 deep sleep idle frames will be restored to 6 idle frames, at this
point DMC will triggers DC5/6 once PSR2 enters to deep sleep after
6 idle frames.
In future when we will enable S/W PSR2 tracking, we can change the
PSR2 required deep sleep idle frames to 1 so DMC can trigger the
DC5/6 immediately after S/W manual waiting of 6 idle frames get
complete.

v2: calculated s/w state to switch over dc3co when there is an
update. [Imre]
Used cancel_delayed_work_sync() in order to avoid any race
with already scheduled delayed work. [Imre]
v3: Cancel_delayed_work_sync() may blocked the commit work.
hence dropping it, dc5_idle_thread() checks the valid wakeref before
putting the reference count, which avoids any chances of dropping
a zero wakeref. [Imre (IRC)]
v4: Used frontbuffer flush mechanism. [Imre]
v5: Used psr.pipe to extract frontbuffer busy bits. [Imre]
Used cancel_delayed_work_sync() in encoder disable path. [Imre]
Used mod_delayed_work() instead of cancelling and scheduling a
delayed work. [Imre]
Used psr.lock in tgl_dc5_idle_thread() to enable psr2 deep
sleep. [Imre]
Removed DC5_REQ_IDLE_FRAMES macro. [Imre]
v6: Used dc3co_exitline check instead of TGL and dc3co allowed_dc_mask
checks, used delayed_work_pending with the psr lock and removed the
psr2_deep_slp_disabled flag. [Imre]
v7: Code refactoring, moved most of functional code to inte_psr.c [Imre]
Using frontbuffer_bits on psr.pipe check instead of
busy_frontbuffer_bits. [Imre]
Calculating dc3co_exit_delay in intel_psr_enable_locked. [Imre]

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003081738.22101-6-anshuman.gupta@intel.com

drm/i915/tgl: Enable DC3CO state in "DC Off" power well

Add target_dc_state and used by set_target_dc_state API
in order to enable DC3CO state with existing DC states.
target_dc_state will enable/disable the desired DC state in
DC_STATE_EN reg when "DC Off" power well gets disable/enable.

v2: commit log improvement.
v3: Used intel_wait_for_register to wait for DC3CO exit. [Imre]
Used gen9_set_dc_state() to allow/disallow DC3CO. [Imre]
Moved transcoder psr2 exit line enablement from tgl_allow_dc3co()
to a appropriate place haswell_crtc_enable(). [Imre]
Changed the DC3CO power well enabled call back logic as
recommended in review comments. [Imre]
v4: Used wait_for_us() instead of intel_wait_for_reg(). [Imre (IRC)]
v5: using udelay() instead of waiting for DC3CO exit status.
v6: Fixed minor unwanted change.
v7: Removed DC3CO powerwell and POWER_DOMAIN_VIDEO.
v8: Uniform checks by using only target_dc_state instead of allowed_dc_mask
in "DC off" power well callback. [Imre]
Adding "DC off" power well id to older platforms. [Imre]
Removed psr2_deep_sleep flag from tgl_set_target_dc_state. [Imre]
v9: Used switch case for target DC state in
gen9_dc_off_power_well_disable(), checking DC3CO state against
allowed DC mask, using WARN_ON() in
tgl_set_target_dc_state(). [Imre]
v10: Code refactoring and using sanitize_target_dc_state(). [Imre]

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003081738.22101-4-anshuman.gupta@intel.com

drm/i915/tgl: Add DC3CO mask to allowed_dc_mask and gen9_dc_mask

Enable dc3co state in enable_dc module param and add dc3co
enable mask to allowed_dc_mask and gen9_dc_mask.

v1: Adding enable_dc=3,4 options to enable DC3CO with DC5 and DC6
independently. [Animesh]
v2: Using a switch statement for cleaner code. [Animesh]

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003081738.22101-3-anshuman.gupta@intel.com

drm/i915/vga: rename intel_vga_msr_write() to intel_vga_reset_io_mem()

Rename the function per Ville's suggestion. No functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004122019.12009-1-jani.nikula@intel.com

drm/i915/display: abstract all vgaarb access to intel_vga.[ch]

Split out the code related to vga client and vgaarb all over the place
into new intel_vga.[ch]. No functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191001152506.7854-1-jani.nikula@intel.com

drm/i915/tgl: Check the UC health of tc controllers after power on

New step added for TGL, required for us to check the TC
microcontroller health after power on TC aux.

BSpec: 49294

Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920205810.211048-7-jose.souza@intel.com

drm/i915: Align power domain names with port names

There is a difference in BSpec's and the driver's designation of DDI
ports. BSpec uses the following names:
- before GEN11:
BSpec/driver:
port A/B/C/D etc
- GEN11:
BSpec/driver:
port A-F
- GEN12:
BSpec:
port A/B/C for combo PHY ports
port TC1-6 for Type C PHY ports
driver:
port A-I.
The driver's port D name matches BSpec's TC1 port name.

So far power domains were named according to the BSpec designation, to
make it easier to match the code against the specification. That however
can be confusing when a power domain needs to be matched to a port on
GEN12+. To resolve that use the driver's port A-I designation for power
domain names too and rename the corresponding power wells so that they
reflect the mapping from the driver's to BSpec's port name.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823100711.27833-1-imre.deak@intel.com

drm/i915/tgl: Move transcoders to pipes' powerwells

When trying to read registers from transcoder C and D while PG3 is ON it
causes unclaimed access warnings. Adding the powerwells for the pipes
fixes the issue, but doesn't match the spec.

Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190817093902.2171-4-lucas.demarchi@intel.com

drm/i915: Sanitize PHY state during display core uninit

To work around a DMC/Punit issue on ICL where the driver's
ICL_PORT_COMP_DW8/IREFGEN PHY setting is lost when entering/exiting DC6
state, make sure to reinit the PHY whenever disabling DC states.
Similarly the driver's PHY/DBUF/CDCLK settings should have been preserved
across DC5/6 transitions, so check this on all platforms.

This gets rid of the following WARN during suspend:
Combo PHY A HW state changed unexpectedly

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816095523.15800-1-imre.deak@intel.com

drm/i915: Wrappers for display register waits

To reduce the number of explicit dev_priv->uncore calls in the display
code ahead of the introduction of dev_priv->de_uncore, this patch
introduces a wrapper for one of the main usages of it, the register
waits. When we transition to the new uncore, we can just update the
wrapper to point to the appropriate structure.

Since the vast majority of waits are on a set or clear of a bit or mask,
add set & clear flavours of the wrapper to simplify the code.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816012343.36433-7-daniele.ceraolospurio@intel.com

drm/i915: Move i915_power_well_id out of i915_reg.h

It has nothing to do with registers, so move it to the more appropriate
intel_display_power.h

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816012343.36433-2-daniele.ceraolospurio@intel.com

drm/i915/tgl: Fixing up list of PG3 power domains.

The DDI-IO power wells (PWR_WELL_CTL_DDI) are backing
the IO/PHY functionality, which doesn't need the PG3
power power well. Accordingly fixing up the list of
PG3 power domains.

Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190811100232.27964-1-anshuman.gupta@intel.com

drm/i915/icl: Remove DDI IO power domain from PG3 power domains

The DDI-IO power wells (PWR_WELL_CTL_DDI) are backing
the IO/PHY functionality, which doesn't need the PG3
power power well. Accordingly fixing up the list of
PG3 power domains.

v2: Removed "DDI E/F IO"power domain as well [Imre]

Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190811081908.9114-1-anshuman.gupta@intel.com

drm/i915: abstract display suspend/resume operations

Increase abstraction of display suspend/resume operations by providing
higher level functions, and hiding the details inside
intel_display_power.c.

v2: Make checkpatch happy:
- braces {} are not necessary for single statement blocks
v3: Also move hsw/bdw PC8 sequences since they are related to
display PM anyways. (Ville)
v4: Rebase after a long time, plus Move functions to the new
intel_display_power so we can stop exporting platform specific
functions as pointed by Jani.
v5: Remove unnecessary braces.
v6 by Jani: make this purely non-functional cleanup, make functions static

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190806122208.16786-2-jani.nikula@intel.com

drm/i915: rename intel_drv.h to display/intel_display_types.h

Everything about the file is about display, and mostly about types
related to display. Move under display/ as intel_display_types.h to
reflect the facts.

There's still plenty to clean up, but start off with moving the file
where it logically belongs and naming according to contents.

v2: fix the include guard name in the renamed file

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190806113933.11799-1-jani.nikula@intel.com

drm/i915: Fix the TBT AUX power well enabling

Fix the mapping from a TBT AUX power well index to the DP_AUX_CH_CTL
register.

Fixes: c7375d9542f1 ("drm/i915: Configure AUX_CH_CTL when enabling the AUX power domain")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-7-imre.deak@intel.com
(cherry picked from commit 29ae36abf08f943b76a2959f5000c44efa335be7)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/tgl: skip setting PORT_CL_DW12_* on initialization

According to the spec when initializing the display in TGL we should not
set PORT_CL_DW12 for the Aux channel of the combo PHYs. We will re-use the
power well hooks from ICL so only set this register on gen < 12.

v2: Generalize check for gen 12 (suggested by José)
v3: Rebase after enum phy introduction

Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713010940.17711-2-lucas.demarchi@intel.com

drm/i915: Propagate "_remove" function name suffix down

Similar to the "_release" case, consistently replace mixed
"_cleanup"/"_fini"/"_fini_hw" components found in names of functions
called from i915_driver_remove() with "_remove" or "_driver_remove"
suffixes for better code readability.

Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712112429.740-6-janusz.krzysztofik@linux.intel.com

drm/i915/tgl: apply Display WA #1178 to fix type C dongles

Add port C to workaround to cover Tiger Lake.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708231629.9296-22-lucas.demarchi@intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711213517.13674-1-lucas.demarchi@intel.com

drm/i915/tgl: Add power well to support 4th pipe

Add power well 5 to support 4th pipe and transcoder on TGL.

Cc: James Ausmus <james.ausmus@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-10-lucas.demarchi@intel.com

drm/i915/tgl: Add power well support

The patch adds the new power wells introduced by TGL (GEN 12) and
maps these to existing/new power domains. The changes for GEN 12 wrt
to GEN 11 are the following:

- Transcoder#EDP removed from power well#1 (Transcoder#A used in
low-power mode instead)
- Transcoder#A is now backed by power well#1 instead of power well#3
- The DDI#B/C combo PHY ports are now backed by power well#1 instead of
power well#3
- New power well#5 added for pipe#D functionality (TODO)
- 2 additional TC ports (TC#5-6) backed by power well#3, 2 port
specific IO power wells (only for the non-TBT modes) and 4 port
specific AUX power wells (2-2 for TBT vs. non-TBT modes)
- Power well#2 backs now VDSC/joining for pipe#A instead of VDSC for
eDP and MIPI DSI (TODO)

On TGL Port DDI#C changed to be a combo PHY (native DP/HDMI) and
BSpec has renamed ports DDI#D-F to TC#4-6 respectively. Thus on ICL we
have the following naming for ports:

- Combo PHYs (native DP/HDMI):
DDI#A-B
- TBT/non-TBT (TC altmode, native DP/HDMI) PHYs:
DDI#C-F

Starting from GEN 12 we have the following naming for ports:
- Combo PHYs (native DP/HDMI):
DDI#A-C
- TBT/non-TBT (TC altmode, native DP/HDMI) PHYs:
DDI TC#1-6

To save some space in the power domain enum the power domain naming in
the driver reflects the above change, that is power domains TC#1-3 are
added as aliases for DDI#D-F and new power domains are reserved for
TC#4-6.

v2 (Lucas):
- Separate out the bits and definitions for TGL from the ICL ones.
Fix use of TRANSCODER_EDP_VDSC, that is now the correct define since
we don't define TRANSCODER_A_VDSC power domain to spare a one bit in
the bitmask (suggested by Ville)
v3 (Lucas):
- Fix missing squashes on v2
- Rebase on renamed TRANSCODER_EDP_VDSC

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-9-lucas.demarchi@intel.com

drm/i915/tgl: rename TRANSCODER_EDP_VDSC to use on transcoder A

On TGL the special EDP transcoder is gone and it should be handled by
transcoder A.

v2 (Lucas):
- Reuse POWER_DOMAIN_TRANSCODER_EDP_VDSC (suggested by Ville)
- Use crtc->dev since new_crtc_state->state may be NULL on atomic
commit (suggested by Maarten)
v3 (Lucas):
- Rename power domain so it's clear it can also be used for transcoder
A in TGL (requested by José and Manasi)

Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-8-lucas.demarchi@intel.com

drm/i915: Transition port type checks to phy checks

Transition the remaining uses of intel_port_is_* over to the equivalent
intel_phy_is_* functions and drop the port functions.

v5: Fix a call in a debug function that's only called when
CONFIG_DRM_I915_DEBUG_RUNTIME_PM is on. (CI)

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190709183934.445-5-matthew.d.roper@intel.com

drm/i915/gen11: Convert combo PHY logic to use new 'enum phy' namespace

Convert the code that operates directly on gen11 combo PHY's to use the
new namespace. Combo PHY registers are those named "ICL_PORT_*" plus
ICL_DPHY_CHKN.

Note that a lot of the PHY programming happens in the MIPI DSI code.
For clarity I've added a for_each_dsi_phy() to loop over the phys used
by DSI. Since DSI always uses A & B on gen11, port=phy in all cases so
it doesn't actually matter which form we use in the DSI code. I've used
the phy iterator in code that's explicitly working with the combo PHY,
but left the rest of the DSI code using the port iterator and namespace
to minimize patch deltas. We can switch the rest of the DSI code over
to use phy terminology later if this winds up being too confusing.

v6: Drop an include of drm/i915_drm.h; that was previously included just
for the definition of 'enum port' which this patch removes the need
for. (Jose)

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190709183934.445-4-matthew.d.roper@intel.com

drm/i915/ehl: Add support for DPLL4 (v10)

This patch adds support for DPLL4 on EHL that include the
following restrictions:

- DPLL4 cannot be used with DDIA (combo port A internal eDP usage).
DPLL4 can be used with other DDIs, including DDID
(combo port A external usage).

- DPLL4 cannot be enabled when DC5 or DC6 are enabled.

- The DPLL4 enable, lock, power enabled, and power state are connected
to the MGPLL1_ENABLE register.

v2: (suggestions from Bob Paauwe)
- Rework ehl_get_dpll() function to call intel_find_shared_dpll() and
iterate twice: once for Combo plls and once for MG plls.

- Use MG pll funcs for DPLL4 instead of creating new ones and modify
mg_pll_enable to include the restrictions for EHL.

v3: Fix compilation error

v4: (suggestions from Lucas and Ville)
- Treat DPLL4 as a combo phy PLL and not as MG PLL
- Disable DC states when this DPLL is being enabled
- Reuse icl_get_dpll instead of creating a separate one for EHL

v5: (suggestion from Ville)
- Refcount the DC OFF power domains during the enabling and disabling
of this DPLL.

v6: rebase

v7: (suggestion from Imre)
- Add a new power domain instead of iterating over the domains
assoicated with DC OFF power well.

v8: (Ville and Imre)
- Rename POWER_DOMAIN_DPLL4 TO POWER_DOMAIN_DPLL_DC_OFF
- Grab a reference in intel_modeset_setup_hw_state() if this
DPLL was already enabled perhaps by BIOS.
- Check for the port type instead of the encoder

v9: (Ville)
- Move the block of code that grabs a reference to the power domain
POWER_DOMAIN_DPLL_DC_OFF to intel_modeset_readout_hw_state() to ensure
that there is a reference present before this DPLL might get disabled.

v10: rebase

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703230353.24059-1-vivek.kasireddy@intel.com

drm/i915: synchronize_irq() against the actual irq

When eliminating our use of drm_irq_install() I failed to convert
all our synchronize_irq() calls to consult pdev->irq instead of
dev_priv->drm.irq. As we no longer populate dev_priv->drm.irq
we're no longer synchronizing against anything.

v2: Add intel_syncrhonize_irq() (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Imre Deak <imre.deak@intel.com>
Fixes: b318b82455bd ("drm/i915: Nuke drm_driver irq vfuncs")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111012
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190702151723.29739-1-ville.syrjala@linux.intel.com

drm/i915: Add state verification for the TypeC port mode

Add state verification for the TypeC port mode wrt. the port's AUX power
well enabling/disabling. Also check the correctness of changing the port
mode:
- When enabling/disabling the AUX power well for a TypeC port we must hold
the TypeC port lock - the case for AUX transfers - or hold a Type C
port link reference - the case for modeset enabling/disabling.
- When changing the TypeC port mode the port's AUX power domain must be
disabled.

v2: (Ville)
- Simplify power_well_async_ref_count().
- Fix the commit log, clarifying what are the valid conditions to
enable/disable the AUX power wells.

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-22-imre.deak@intel.com

drm/i915: Fix the TBT AUX power well enabling

Fix the mapping from a TBT AUX power well index to the DP_AUX_CH_CTL
register.

Fixes: c7375d9542f1 ("drm/i915: Configure AUX_CH_CTL when enabling the AUX power domain")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-7-imre.deak@intel.com

drm/i915: Tune down WARNs about TBT AUX power well enabling

The HW completion flag for the TBT AUX power well enabling/disabling
gets stuck if the firmware tears down the TBT DP tunnel before the
completion.

We shouldn't complain about the timeout, since it's expected to happen
and doesn't cause further issues. We suppress the disabling timeout
already, do the same for enabling.

v2:
- Make the debug message more precise. (José)

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-3-imre.deak@intel.com

drm/i915: move modesetting core code under display/

Now that we have a new subdirectory for display code, continue by moving
modesetting core code.

display/intel_frontbuffer.h sticks out like a sore thumb, otherwise this
is, again, a surprisingly clean operation.

v2:
- don't move intel_sideband.[ch] (Ville)
- use tabs for Makefile file lists and sort them

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613084416.6794-3-jani.nikula@intel.com