drm/mode: switch from drm_debug_printer() to device specific drm_dbg_printer()

Prefer the device specific debug printer.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/56f6f3e8e045206706d7a292968b6b2f4fc19c27.1705410327.git.jani.nikula@intel.com

drm/debugfs: remove dev->debugfs_list and debugfs_mutex v2

The mutex was completely pointless in the first place since any
parallel adding of files to this list would result in random
behavior since the list is filled and consumed multiple times.

Completely drop that approach and just create the files directly but
return -ENODEV while opening the file when the minors are not
registered yet.

v2: rebase on debugfs directory rework, limit access before minors are
registered.

Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230829110115.3442-5-christian.koenig@amd.com
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>

drm/debugfs: create debugfs late register functions

Although the device-centered debugfs functions can track requests for
the addition of DRM debugfs files at any time and have them added all
at once during drm_dev_register(), they are not able to create debugfs
files for modeset components, as they are registered after the primary
and the render drm_minor are registered.

So, create a drm_debugfs_late_register() function, which is responsible
for dealing with the creation of all the debugfs files for modeset
components at once. Therefore, the functions drm_debugfs_add_file()
and drm_debugfs_add_files() can be used in late_register hooks.

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219120621.15086-4-mcanal@igalia.com

drm: Fix potential null-ptr-deref due to drmm_mode_config_init()

drmm_mode_config_init() will call drm_mode_create_standard_properties()
and won't check the ret value. When drm_mode_create_standard_properties()
failed due to alloc, property will be a NULL pointer and may causes the
null-ptr-deref. Fix the null-ptr-deref by adding the ret value check.

Found null-ptr-deref while testing insert module bochs:
general protection fault, probably for non-canonical address
0xdffffc000000000c: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067]
CPU: 3 PID: 249 Comm: modprobe Not tainted 6.1.0-rc1+ #364
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:drm_object_attach_property+0x73/0x3c0 [drm]
Call Trace:
<TASK>
__drm_connector_init+0xb6c/0x1100 [drm]
bochs_pci_probe.cold.11+0x4cb/0x7fe [bochs]
pci_device_probe+0x17d/0x340
really_probe+0x1db/0x5d0
__driver_probe_device+0x1e7/0x250
driver_probe_device+0x4a/0x120
__driver_attach+0xcd/0x2c0
bus_for_each_dev+0x11a/0x1b0
bus_add_driver+0x3d7/0x500
driver_register+0x18e/0x320
do_one_initcall+0xc4/0x3e0
do_init_module+0x1b4/0x630
load_module+0x5dca/0x7230
__do_sys_finit_module+0x100/0x170
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7ff65af9f839

Fixes: 6b4959f43a04 ("drm/atomic: atomic plane properties")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118021651.2460-1-shangxiaojing@huawei.com

Revert "drm: hide unregistered connectors from GETCONNECTOR IOCTL"

This reverts commit 981f09295687f856d5345e19c7084aca481c1395.

It turns out this causes logically active but disconnected DP MST
connectors to disappear from the KMS resources list, and Mutter
then assumes the connector is already disabled. Later on Mutter tries
to re-use the same CRTC but fails since on the kernel side it's still
tied to the disconnected DP MST connector.

Signed-off-by: Simon Ser <contact@emersion.fr>
Tested-by: Jonas Ådahl <jadahl@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221017153150.60675-1-contact@emersion.fr

Revert "drm: hide unregistered connectors from GETCONNECTOR IOCTL"

This reverts commit 981f09295687f856d5345e19c7084aca481c1395.

It turns out this causes logically active but disconnected DP MST
connectors to disappear from the KMS resources list, and Mutter
then assumes the connector is already disabled. Later on Mutter tries
to re-use the same CRTC but fails since on the kernel side it's still
tied to the disconnected DP MST connector.

Signed-off-by: Simon Ser <contact@emersion.fr>
Tested-by: Jonas Ådahl <jadahl@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221017153150.60675-1-contact@emersion.fr

drm: hide unregistered connectors from GETCONNECTOR IOCTL

When registering a connector, the kernel sends a hotplug uevent in
drm_connector_register(). When unregistering a connector, drivers
are expected to send a uevent as well. However, user-space has no way
to figure out that the connector isn't registered anymore: it'll still
be reported in GETCONNECTOR IOCTLs.

The documentation for DRM_CONNECTOR_UNREGISTERED states:

> The connector […] has since been unregistered and removed from
> userspace, or the connector was unregistered before it had a chance
> to be exposed to userspace

Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220801133754.461037-1-contact@emersion.fr

drm: use idr_init_base() to initialize mode_config.tile_idr

idr_init_base(), implemented by commit 6ce711f27500 ("idr: Make 1-based
IDRs more efficient"), let us set an arbitrary base other than
idr_init(), which uses base 0.

Since, for this IDR, no ID < 1 is ever requested/allocated, using
idr_init_base(&idr, 1) avoids unnecessary tree walks.

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220701185303.284082-7-dakr@redhat.com

drm: use idr_init_base() to initialize mode_config.object_idr

idr_init_base(), implemented by commit 6ce711f27500 ("idr: Make 1-based
IDRs more efficient"), let us set an arbitrary base other than
idr_init(), which uses base 0.

Since, for this IDR, no ID < 1 is ever requested/allocated, using
idr_init_base(&idr, 1) avoids unnecessary tree walks.

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220701185303.284082-6-dakr@redhat.com

drm: Drop drm_framebuffer.h from drm_crtc.h

drm_crtc.h has no need for drm_frambuffer.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_framebuffer.h.

Quite a few placs do currently depend on drm_framebuffer.h without
actually including it directly. All of those need to be fixed
up.

v2: Fix up msm some more
v2: Deal with ingenic and shmobile as well

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614095449.29311-1-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>

drm/encoder: make encoder control functions optional

Simple managed encoders do not require the .destroy callback,
make the whole funcs structure optional.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: warn if cursor plane is set with legacy funcs

A driver must not set drm_crtc.cursor and any of the legacy funcs at the
same time, otherwise it's not clear which one DRM core should use for
legacy cursor updates.

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201222134002.161613-1-contact@emersion.fr

drm: require each CRTC to have a unique primary plane

User-space expects to be able to pick a primary plane for each CRTC
exposed by the driver. Make sure this assumption holds in
drm_mode_config_validate.

Use the legacy drm_crtc.primary field to check this, because it's
simpler and we require drivers to set it anyways. Accumulate a set of
primary planes which are already used for a CRTC in a bitmask. Error out
if a primary plane is re-used.

v2: new patch

v3:
- Use u64 instead of __u64 (Jani)
- Use `unsigned int` instead of `unsigned` (Jani)

v4:
- Use u32 instead of u64 for plane mask (Ville)
- Use drm_plane_mask instead of BIT (Ville)
- Fix typos (Ville)

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201211184634.74534-4-contact@emersion.fr

drm: require a non_NULL drm_crtc.primary

If a CRTC is missing a legacy primary plane pointer, a lot of things
will be broken for user-space: fbdev stops working and the entire legacy
uAPI stops working.

Require all drivers to populate drm_crtc.primary to prevent these
issues. Warn if it's NULL.

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201211184634.74534-3-contact@emersion.fr

drm: validate possible_crtcs for primary and cursor planes

If a primary or cursor plane is not compatible with a CRTC it's attached
to via the legacy primary/cursor field, things will be broken for legacy
user-space.

v4: use drm_crtc_mask instead of BIT (Ville)

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201211184634.74534-2-contact@emersion.fr

drm : Insert blank lines after declarations.

Resolve checkpatch issues for missing blank lines after declarations.
Issues found in multiple files with checkpatch.pl.

Signed-off-by: Suraj Upadhyay <usuraj35@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702131749.GA25710@blackclown

drm: Manage drm_mode_config_init with drmm_

drm_mode_config_cleanup is idempotent, so no harm in calling this
twice. This allows us to gradually switch drivers over by removing
explicit drm_mode_config_cleanup calls.

With this step it's now also possible that (at least for simple
drivers) automatic resource cleanup can be done correctly without a
drm_driver->release hook. Therefore allow this now in
devm_drm_dev_init().

Also with drmm_ explicit drm_driver->release hooks are kinda not the
best option: Drivers can always just register their current release
hook with drmm_add_action, but even better they could split them up to
simplify the unwinding for the driver load failure case. So deprecate
that hook to discourage future users.

v2: Fixup the example in the kerneldoc too.

v3:
- For paranoia, double check that minor->dev == dev in the release
hook, because I botched the pointer math in the drmm library.
- Call drm_mode_config_cleanup when drmm_add_action fails, we'd be
missing some mutex_destroy and ida_cleanup otherwise (Laurent)

v4: Add a drmm_add_action_or_reset (like devm_ has) to encapsulate this
pattern (Noralf).

v5: Fix oversight in the new drmm_add_action_or_reset macro (Noralf)

v4: Review from Sam:
- drmm_mode_config_init wrapper (also suggested by Thomas)
- improve commit message, explain better why ->relase is deprecated

v5:
- Make drmm_ the main function, with the old one as compat wrapper
(Sam)
- Add FIXME comments to drm_mode_config_cleanup/init() that drivers
shouldn't use these anymore.
- Move drmm_add_action_or_reset helper to an earlier patch.

Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-27-daniel.vetter@ffwll.ch

drm: Skip drm_mode_config_validate() for !modeset

drm_mode_config_init() may not have been called when the driver/device
doesn't support modeset. That will cause drm_mode_config_validate()
to oops. Skip the validation for !modeset.

TODO: We may want to consider calling drm_mode_config_init()
unconditionally to avoid similar issues elsewhere...

Fixes: 74d2aacbe840 ("drm: Validate encoder->possible_clones")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200318182518.31618-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm: Validate encoder->possible_crtcs

WARN if the encoder possible_crtcs is effectively empty or contains
bits for non-existing crtcs.

v2: Move to drm_mode_config_validate() (Daniel)
Make the docs say we WARN when this is wrong (Daniel)
Extract full_crtc_mask()

Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211162208.16224-7-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: Validate encoder->possible_clones

Many drivers are populating encoder->possible_clones wrong. Let's
persuade them to get it right by adding some loud WARNs.

We'll cross check the bits between any two encoders. So either
both encoders can clone with the other, or neither can.

We'll also complain about effectively empty possible_clones, and
possible_clones containing bits for encoders that don't exist.

v2: encoder->possible_clones now includes the encoder itelf
v3: Move to drm_mode_config_validate() (Daniel)
Document that you get a WARN when this is wrong (Daniel)
Extract full_encoder_mask()
v4: !! instead of ! (Daniel)

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211162208.16224-6-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: Include the encoder itself in possible_clones

The docs say possible_clones should always include the encoder itself.
Since most drivers don't want to deal with the complexities of cloning
let's allow them to set possible_clones=0 and instead we'll fix that
up in the core.

We can't put this special case into drm_encoder_init() because drivers
will have to fill up possible_clones after adding all the relevant
encoders. Otherwise they wouldn't know the proper encoder indexes to
use. So we'll just do it just before registering the device.

v2: Don't set the bit if possible_clones!=0 so that the
validation (coming soon) will WARN (Thomas)
Fix up the docs to allow possible_clones==0 (Daniel)
.late_register() is too late, introduce drm_mode_config_validate()
which gets called _before_ we register the char device (Daniel)

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211162208.16224-2-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/modeset: Prime modeset lock vs dma_resv

It's kinda really hard to get this wrong on a driver with both display
and dma_resv locking. But who ever knows, so better to make sure that
really all drivers nest these the same way.

For actual lock semantics the acquire context nesting doesn't matter.
But to teach lockdep what's going on with ww_mutex the acquire ctx is
a fake lockdep lock, hence from a lockdep pov it does matter. That's
why I figured better to include it.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christian König <christian.koenig@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191119210844.16947-2-daniel.vetter@ffwll.ch

drm/doc: Drop misleading comment on drm_mode_config_cleanup

This is not something we'll fix, because failing to clean up stuff (or
doing it in the wrong order) is a driver bug. The offending FIXME goes
all the way back to the original modeset merge.

We've added a WARN_ON in

commit 2b677e8c08eed11e4ebe66a7c334f03e389a19a3
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Mon Dec 10 21:16:05 2012 +0100

drm: reference framebuffers which are on the idr

including a comment blaming drivers on this. Right thing to do is most
likely drm_atomic_helper_shutdown plus making sure that
drm_mode_config_cleanup is not called too early (i.e. not in driver
unload, but only in the final drm_device release callback).

Cc: Mihail Atanassov <Mihail.Atanassov@arm.com>
Reported-by: Mihail Atanassov <Mihail.Atanassov@arm.com>
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022163717.1064-1-daniel.vetter@ffwll.ch

drm: drop use of drmP.h in drm/*

The use of the drmP.h header file is deprecated.
Remove use from all files in drm/*
so people do not look there and follow a bad example.

Build tested allyesconfig,allmodconfig on x86, arm etc.
Including alpha that is as always more challenging than
the rest.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20190526173535.32701-8-sam@ravnborg.org

drm: Expose "FB_DAMAGE_CLIPS" property to atomic aware user-space only

Plane property "FB_DAMAGE_CLIPS" can only be used by atomic aware
user-space, so no point exposing it otherwise.

Cc: <stable@vger.kernel.org>
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: d3b21767821e ("drm: Add a new plane property to send damage during plane update")
Link: https://patchwork.freedesktop.org/patch/msgid/20190415172814.9840-1-drawat@vmware.com

drm: Rename crtc_idr as object_idr to KMS cleanups

This patch solves this TODO task:
drm_mode_config.crtc_idr is misnamed, since it contains all KMS object.
Should be renamed to drm_mode_config.object_idr.

Signed-off-by: Shayenne da Luz Moura <shayenneluzmoura@gmail.com>
[danvet: resolve conflict with addition of privobj_list.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181213212957.vkitkyl5cj2qh7qr@smtp.gmail.com

drm/atomic: integrate modeset lock with private objects

Follow the same pattern of locking as with other state objects. This
avoids boilerplate in the driver.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181022123122.30468-1-boris.brezillon@bootlin.com

drm: Add a new plane property to send damage during plane update

FB_DAMAGE_CLIPS is an optional plane property to mark damaged regions
on the plane in framebuffer coordinates of the framebuffer attached to
the plane.

The layout of blob data is simply an array of "struct drm_mode_rect".
Unlike plane src coordinates, damage clips are not in 16.16 fixed point.
As plane src in framebuffer cannot be negative so are damage clips. In
damage clip, x1/y1 are inclusive and x2/y2 are exclusive.

This patch also exports the kernel internal drm_rect to userspace as
drm_mode_rect. This is because "struct drm_clip_rect" is not sufficient
to represent damage for current plane size.

Driver which are interested in enabling FB_DAMAGE_CLIPS property for a
plane should enable this property using drm_plane_enable_damage_clips.

v2:
- Input validation on damage clips against framebuffer size.
- Doc update, other minor changes.

Signed-off-by: Lukasz Spintzyk <lukasz.spintzyk@displaylink.com>
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm: Add vrr_enabled property to drm CRTC

This patch introduces the 'vrr_enabled' CRTC property to allow
dynamic control over variable refresh rate support for a CRTC.

This property should be treated like a content hint to the driver -
if the hardware or driver is not capable of driving variable refresh
timings then this is not considered an error.

Capability for variable refresh rate support should be determined
by querying the vrr_capable drm connector property.

It is worth noting that while the property is intended for atomic use
it isn't filtered from legacy userspace queries. This allows for Xorg
userspace drivers to implement support.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm: Differentiate the lack of an interface from invalid parameter

If the ioctl is not supported on a particular piece of HW/driver
combination, report ENOTSUP (aka EOPNOTSUPP) so that it can be easily
distinguished from both the lack of the ioctl and from a regular invalid
parameter.

v2: Across all the kms ioctls we had a mixture of reporting EINVAL,
ENODEV and a few ENOTSUPP (most where EINVAL) for a failed
drm_core_check_feature(). Update everybody to report ENOTSUPP.

v3: ENOTSUPP is an internal errno! It's value (524) does not correspond
to a POSIX errno, the one we want is ENOTSUP. However,
uapi/asm-generic/errno.h doesn't include ENOTSUP but man errno says

"ENOTSUP and EOPNOTSUPP have the same value on Linux,
but according to POSIX.1 these error values should be
distinct."

so use EOPNOTSUPP as its equivalent.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v2
Link: https://patchwork.freedesktop.org/patch/msgid/20180913192050.24812-1-chris@chris-wilson.co.uk

drm: writeback: Add client capability for exposing writeback connectors

Due to the fact that writeback connectors behave in a special way
in DRM (they always report being disconnected) we might confuse some
userspace. Add a client capability for writeback connectors that will
filter them out for clients that don't understand the capability.

Changelog:
- only accept the capability if the client has already set the
DRM_CLIENT_CAP_ATOMIC one.

Cc: Sean Paul <seanpaul@chromium.org>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Link: https://patchwork.freedesktop.org/patch/229038/

drm: rework delayed connector cleanup in connector_iter

PROBE_DEFER also uses system_wq to reprobe drivers, which means when
that again fails, and we try to flush the overall system_wq (to get
all the delayed connectore cleanup work_struct completed), we
deadlock.

Fix this by using just a single cleanup work, so that we can only
flush that one and don't block on anything else. That means a free
list plus locking, a standard pattern.

v2:
- Correctly free connectors only on last ref. Oops (Chris).
- use llist_head/node (Chris).

v3
- Add init_llist_head (Chris).

Fixes: a703c55004e1 ("drm: safely free connectors from connector_iter")
Fixes: 613051dac40d ("drm: locking&new iterators for connector_list")
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: <stable@vger.kernel.org> # v4.11+: 613051dac40d ("drm: locking&new iterators for connector_list"
Cc: <stable@vger.kernel.org> # v4.11+
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Javier Martinez Canillas <javier@dowhile0.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Guillaume Tucker <guillaume.tucker@collabora.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Matt Hart <matthew.hart@linaro.org>
Cc: Thierry Escande <thierry.escande@collabora.co.uk>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213124936.17914-1-daniel.vetter@ffwll.ch

drm: More debug info for fb leaks in mode_config_cleanup

We're spotting this very rarely in CI, but have no idea. Let's add
more debug info about what's going on here.

References: https://bugs.freedesktop.org/show_bug.cgi?id=102707
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171207144925.14191-1-daniel.vetter@ffwll.ch

drm: safely free connectors from connector_iter

In

commit 613051dac40da1751ab269572766d3348d45a197
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Dec 14 00:08:06 2016 +0100

drm: locking&new iterators for connector_list

we've went to extreme lengths to make sure connector iterations works
in any context, without introducing any additional locking context.
This worked, except for a small fumble in the implementation:

When we actually race with a concurrent connector unplug event, and
our temporary connector reference turns out to be the final one, then
everything breaks: We call the connector release function from
whatever context we happen to be in, which can be an irq/atomic
context. And connector freeing grabs all kinds of locks and stuff.

Fix this by creating a specially safe put function for connetor_iter,
which (in this rare case) punts the cleanup to a worker.

Reported-by: Ben Widawsky <ben@bwidawsk.net>
Cc: Ben Widawsky <ben@bwidawsk.net>
Fixes: 613051dac40d ("drm: locking&new iterators for connector_list")
Cc: Dave Airlie <airlied@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: <stable@vger.kernel.org> # v4.11+
Reviewed-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171204204818.24745-1-daniel.vetter@ffwll.ch

drm: Check mode object lease status in all master ioctl paths [v4]

Attempts to modify un-leased objects are rejected with an error.
Information returned about unleased objects is modified to make them
appear unusable and/or disconnected.

Changes for v2 as suggested by Daniel Vetter <daniel.vetter@ffwll.ch>:

* With the change in the __drm_mode_object_find API to pass the
file_priv along, we can now centralize most of the lease-based
access checks in that function.

* A few places skip that API and require in-line checks.

Changes for v3 provided by Dave Airlie <airlied@redhat.com>

* remove support for leasing encoders.
* add support for leasing planes.

Changes for v4

* Only call drm_lease_held if DRIVER_MODESET.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/plane: drop num_overlay_planes (v3)

In order to implement plane leasing we need to count things,
just make the code consistent with the counting code currently
used for counting crtcs/encoders/connectors and drop the need
for num_overlay_planes.

v2: don't forget to assign plane_ptr. (keithp)
v3: use correct bounds check, found by igt.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: Create a format/modifier blob

Updated blob layout (Rob, Daniel, Kristian, xerpi)

v2:
* Removed __packed, and alignment (.+)
* Fix indent in drm_format_modifier fields (Liviu)
* Remove duplicated modifier > 64 check (Liviu)
* Change comment about modifier (Liviu)
* Remove arguments to blob creation, use plane instead (Liviu)
* Fix data types (Ben)
* Make the blob part of uapi (Daniel)

v3:
Remove unused ret field.
Change i, and j to unsigned int (Emil)

v4:
Use plane->modifier_count instead of recounting (Daniel)

v5:
Rename modifiers to modifiers_property (Ville)
Use sizeof(__u32) instead to reflect UAPI nature (Ville)
Make BUILD_BUG_ON for blob header size

Cc: Rob Clark <robdclark@gmail.com>
Cc: Kristian H. Kristensen <hoegsberg@gmail.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Daniel Stone <daniels@collabora.com> (v2)
Reviewed-by: Liviu Dudau <liviu@dudau.co.uk> (v2)
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> (v3)
Signed-off-by: Daniel Stone <daniels@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170724034641.13369-2-ben@bwidawsk.net

drm: Rename connector list iterator API

Currently the functions that initialize and tear down a connector
iterator use the _get() and _put() suffixes. However, these suffixes
are typically used by reference counting functions.

Make these function names a little more consistent by changing the
suffixes to _begin() and _end(), which is a fairly common pattern in
the rest of the Linux kernel.

Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170228144643.5668-8-thierry.reding@gmail.com

drm: Introduce drm_property_blob_{get,put}()

For consistency with other reference counting APIs in the kernel, add
drm_property_blob_get() and drm_property_blob_put() to reference count
DRM blob properties.

Compatibility aliases are added to keep existing code working. To help
speed up the transition, all the instances of the old functions in the
DRM core are already replaced in this commit.

A semantic patch is provided that can be used to convert all drivers to
the new helpers.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170228144643.5668-7-thierry.reding@gmail.com

drm: Introduce drm_connector_{get,put}()

For consistency with other reference counting APIs in the kernel, add
drm_connector_get() and drm_connector_put() functions to reference count
connectors.

Compatibility aliases are added to keep existing code working. To help
speed up the transition, all the instances of the old functions in the
DRM core are already replaced in this commit.

The existing semantic patch for mode object reference count conversion
is extended for these new helpers.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170228144643.5668-4-thierry.reding@gmail.com

drm: Show leaked connectors upon unload

After warning that the connector list is not empty on device
unregistration (i.e. module unload) also print out which connectors are
still hanging around to aide finding the leak.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170119090513.4154-1-chris@chris-wilson.co.uk

drm: Clean up connectors by unreferencing them

Only static connectors should be left at this point, and we should be
able to clean them out by simply dropping that last reference still
around from drm_connector_init.

If that leaves anything behind then we have a driver bug.

Doing the final cleanup this way also allows us to use
drm_connector_iter, removing the very last place where we walk
connector_list explicitly in drm core&helpers.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213230814.19598-8-daniel.vetter@ffwll.ch

drm: locking&new iterators for connector_list

The requirements for connector_list locking are a bit tricky:
- We need to be able to jump over zombie conectors (i.e. with refcount
== 0, but not yet removed from the list). If instead we require that
there's no zombies on the list then the final kref_put must happen
under the list protection lock, which means that locking context
leaks all over the place. Not pretty - better to deal with zombies
and wrap the locking just around the list_del in the destructor.

- When we walk the list we must _not_ hold the connector list lock. We
walk the connector list at an absolutely massive amounts of places,
if all those places can't ever call drm_connector_unreference the
code would get unecessarily complicated.

- connector_list needs it own lock, again too many places that walk it
that we could reuse e.g. mode_config.mutex without resulting in
inversions.

- Lots of code uses these loops to look-up a connector, i.e. they want
to be able to call drm_connector_reference. But on the other hand we
want connectors to stay on that list until they're dead (i.e.
connector_list can't hold a full reference), which means despite the
"can't hold lock for the loop body" rule we need to make sure a
connector doesn't suddenly become a zombie.

At first Dave&I discussed various horror-show approaches using srcu,
but turns out it's fairly easy:

- For the loop body we always hold an additional reference to the
current connector. That means it can't zombify, and it also means
it'll stay on the list, which means we can use it as our iterator to
find the next connector.

- When we try to find the next connector we only have to jump over
zombies. To make sure we don't chase bad pointers that entire loop
is protected with the new connect_list_lock spinlock. And because we
know that we're starting out with a non-zombie (need to drop our
reference for the old connector only after we have our new one),
we're guranteed to still be on the connector_list and either find
the next non-zombie or complete the iteration.

- Only downside is that we need to make sure that the temporary
reference for the loop body doesn't leak. iter_get/put() functions +
lockdep make sure that's the case.

- To avoid a flag day the new iterator macro has an _iter postfix. We
can rename it back once all the users of the unsafe version are gone
(there's about 100 list walkers for the connector_list).

For now this patch only converts all the list walking in the core,
leaving helpers and drivers for later patches. The nice thing is that
we can now finally remove 2 FIXME comments from the
register/unregister functions.

v2:
- use irqsafe spinlocks, so that we can use this in drm_state_dump
too.
- nuke drm_modeset_lock_all from drm_connector_init, now entirely
cargo-culted nonsense.

v3:
- do {} while (!kref_get_unless_zero), makes for a tidier loop (Dave).
- pretty kerneldoc
- add EXPORT_SYMBOL, helpers&drivers are supposed to use this.

v4: Change lockdep annotations to only check whether we release the
iter fake lock again (i.e. make sure that iter_put is called), but
not check any locking dependecies itself. That seams to require a
recursive read lock in trylock mode.

Cc: Dave Airlie <airlied@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213230814.19598-6-daniel.vetter@ffwll.ch

drm: Drop locking cargo-cult from drm_mode_config_init

This is single-threaded setup code, no need for locks. And anyway,
all properties need to be set up before the driver is registered
anyway, they can't be hot-added.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213230814.19598-5-daniel.vetter@ffwll.ch

drm: Don't include <drm/drm_encoder.h> in <drm/drm_crtc.h>

<drm/drm_crtc.h> used to define most of the in-kernel KMS API. It has
now been split into separate files for each object type, but still
includes most other KMS headers to avoid breaking driver compilation.

As a step towards fixing that problem, remove the inclusion of
<drm/drm_encoder.h> from <drm/drm_crtc.h> and include it instead where
appropriate. Also remove the forward declarations of the drm_encoder and
drm_encoder_helper_funcs structures from <drm/drm_crtc.h> as they're not
needed in the header.

<drm/drm_encoder.h> now has to include <drm/drm_mode.h> and contain a
forward declaration of struct drm_encoder in order to allow including it
as the first header in a compilation unit.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sinclair Yeh <syeh@vmware.com> # For vmwgfx
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-2-git-send-email-laurent.pinchart+renesas@ideasonboard.com

drm: Simplify GETRESOURCES ioctl

Looping twice when we can do it once is silly. Also use a consistent
style. Note that there's a good race with the connector list walking,
since that is no longer protected by mode_config.mutex. But that's for
a later patch to fix.

v2: Actually try to not blow up, somehow I lost the hunk that checks
we don't copy too much. Noticed by Chris.

v3:
- squash all drm_mode_getresources cleanups into one
- use consistent style for walking objects (Chris)

v4:
- Use u64_to_user_ptr (Chris)
- Don't forget to copy the last connector (Chris)

v5: Chris was right ...

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161211192019.29603-1-daniel.vetter@ffwll.ch

drm/fence: add out-fences support

Support DRM out-fences by creating a sync_file with a fence for each CRTC
that sets the OUT_FENCE_PTR property.

We use the out_fence pointer received in the OUT_FENCE_PTR prop to send
the sync_file fd back to userspace.

The sync_file and fd are allocated/created before commit, but the
fd_install operation only happens after we know that commit succeed.

v2: Comment by Rob Clark:
- Squash commit that adds DRM_MODE_ATOMIC_OUT_FENCE flag here.

Comment by Daniel Vetter:
- Add clean up code for out_fences

v3: Comments by Daniel Vetter:
- create DRM_MODE_ATOMIC_EVENT_MASK
- userspace should fill out_fences_ptr with the crtc_ids for which
it wants fences back.

v4: Create OUT_FENCE_PTR properties and remove old approach.

v5: Comments by Brian Starkey:
- Remove extra fence_get() in atomic_ioctl()
- Check ret before iterating on the crtc_state
- check ret before fd_install
- set fence_state to NULL at the beginning
- check fence_state->out_fence_ptr before put_user()
- change order of fput() and put_unused_fd() on failure

- Add access_ok() check to the out_fence_ptr received
- Rebase after fence -> dma_fence rename
- Store out_fence_ptr in the drm_atomic_state
- Split crtc_setup_out_fence()
- return -1 as out_fence with TEST_ONLY flag

v6: Comments by Daniel Vetter
- Add prepare/unprepare_crtc_signaling()
- move struct drm_out_fence_state to drm_atomic.c
- mark get_crtc_fence() as static

Comments by Brian Starkey
- proper set fence_ptr fence_state array
- isolate fence_idx increment

- improve error handling

v7: Comments by Daniel Vetter
- remove prefix from internal functions
- make out_fence_ptr an s64 pointer
- degrade DRM_INFO to DRM_DEBUG_ATOMIC when put_user fail
- fix doc issues
- filter out OUT_FENCE_PTR == NULL and do not fail in this case
- add complete_crtc_signalling()
- krealloc fence_state on demand

Comment by Brian Starkey
- remove unused crtc_state arg from get_out_fence()

v8: Comment by Brian Starkey
- cancel events before check for !fence_state
- convert a few lefovers u64 types for out_fence_ptr
- fix memleak by assign fence_state earlier after realloc
- proper accout num_fences in case of error

v9: Comment by Brian Starkey
- memset last position of fence_state after krealloc
Comments by Sean Paul
- pass install_fds in complete_crtc_signaling() instead of ret

- put_user(-1, fence_ptr) when decoding props

v10: Comment by Brian Starkey
- remove unneeded num_fences increment on error path
- kfree fence_state after installing fences fd

v11: rebase against latest drm-misc

v12: rebase again against latest drm-misc

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Brian Starkey <brian.starkey@arm.com> (v10)
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Tested-by: Robert Foss <robert.foss@collabora.com> (v10)
[danvet: Appease checkpatch.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479301221-13056-1-git-send-email-gustavo@padovan.org

drm/fence: add in-fences support

There is now a new property called IN_FENCE_FD attached to every plane
state that receives sync_file fds from userspace via the atomic commit
IOCTL.

The fd is then translated to a fence (that may be a fence_array
subclass or just a normal fence) and then used by DRM to fence_wait() for
all fences in the sync_file to signal. So it only commits when all
framebuffers are ready to scanout.

v2: Comments by Daniel Vetter:
- remove set state->fence = NULL in destroy phase
- accept fence -1 as valid and just return 0
- do not call fence_get() - sync_file_fences_get() already calls it
- fence_put() if state->fence is already set, in case userspace
set the property more than once.

v3: WARN_ON if fence is set but state has no FB

v4: Comment from Maarten Lankhorst
- allow set fence with no related fb

v5: rename FENCE_FD to IN_FENCE_FD

v6: Comments by Daniel Vetter:
- rename plane_state->in_fence back to "fence"
- re-introduce WARN_ON if fence set but no fb

- rebase after fence -> dma_fence rename

v7: Comments by Brian Starkey
- set state->fence to NULL when duplicating the state
- fail if IN_FENCE_FD was already set

v8: rebase against latest drm-misc

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Tested-by: Robert Foss <robert.foss@collabora.com>
[danvet: Rebase onto extracted drm_mode_config.[hc].]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: Extract drm_mode_config.[hc]

And shuffle the kernel-doc structure a bit since drm_crtc.[hc] now
only contains CRTC-related functions and structures.

v2:
- rebase onto drm-misc
- don't forget to move drm_mode_config_cleanup.
- move 2 internal decls under the right heading (Chris)

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>