drm/bridge: cdns-dsi: Add support for J721E wrapper

Add support for wrapper settings for DSI bridge on j721e. Also enable
DPI0

--------------- -----------------------
| -------| |------- |
| DSS | DPI2 |----->| DPI0 | DSI Wrapper |
| -------| |------- |
--------------- -----------------------

As shown above DPI2 output of DSS is connected to DPI0 input of DSI
Wrapper, DSI wrapper gives control wheather to enable/disable DPI0
input. In j721e above is the only configuration supported

Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230103101951.10963-6-r-ravikumar@ti.com

drm/bridge: cdns-dsi: Move to drm/bridge/cadence

Move the cadence dsi bridge under drm/bridge/cadence directory, to
prepare for adding j721e wrapper support

Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230103101951.10963-4-r-ravikumar@ti.com

drm: bridge: cdns-mhdp8546: Enable HDCP

This patch enable HDCP in MHDP driver.

Signed-off-by: Parshuram Thombare <pthombar@cadence.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1618078542-30679-1-git-send-email-pthombar@cadence.com

drm: bridge: cdns-mhdp8546: Add TI J721E wrapper

Add J721E wrapper for mhdp, which sets up the clock and data muxes.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Yuti Amonkar <yamonkar@cadence.com>
Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm: bridge: Add support for Cadence MHDP8546 DPI/DP bridge

Add a new DRM bridge driver for Cadence MHDP8546 DPTX IP used in TI J721E
SoC. MHDP DPTX IP is the component that complies with VESA DisplayPort (DP)
and embedded Display Port (eDP) standards. It integrates uCPU running the
embedded Firmware (FW) interfaced over APB interface.

Basically, it takes a DPI stream as input and outputs it encoded in DP
format. Currently, it supports only SST mode.

Co-developed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Co-developed-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Yuti Amonkar <yamonkar@cadence.com>
Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>