drm: adv7511: Add max_lane_freq_khz variable to struct adv7511_chip_info

The ADV7533 supports a maximum lane clock of 800MHz whereas it is 891MHz
for ADV7535. Add max_lane_freq_khz variable to struct adv7511_chip_info to
handle this difference.

While at it, drop the unused local variable max_lane_freq.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230830142358.275459-4-biju.das.jz@bp.renesas.com

drm: adv7511: Add max_mode_clock_khz variable to struct adv7511_chip_info

The ADV7533 supports a maximum pixel clock of 80MHz whereas it is 148.5MHz
for ADV7535. Add max_mode_clock_khz variable to struct adv7511_chip_info to
handle this difference.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Adam Ford <aford173@gmail.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230830142358.275459-3-biju.das.jz@bp.renesas.com

drm: adv7511: Add struct adv7511_chip_info and use i2c_get_match_data()

Add struct adv7511_chip_info to handle hw differences between various
chips rather checking against the 'type' variable in various places.
Replace 'adv->type'->'info->type' by moving variable 'type' from
struct adv7511 to struct adv7511_chip_info and add adv7511_chip_info as
device data for both OF and ID tables instead of the device type.

Simplify the probe() by replacing of_device_get_match_data() and ID lookup
for retrieving match data with i2c_get_match_data().

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230830142358.275459-2-biju.das.jz@bp.renesas.com

drm/bridge: adv7533: Fix adv7533_mode_valid for adv7533 and adv7535

When dynamically switching lanes was removed, the intent of the code
was to check to make sure that higher speed items used 4 lanes, but
it had the unintended consequence of removing the slower speeds for
4-lane users.

This attempts to remedy this by doing a check to see that the
max frequency doesn't exceed the chip limit, and a second
check to make sure that the max bit-rate doesn't exceed the
number of lanes * max bit rate / lane.

Fixes: 9a0cdcd6649b ("drm/bridge: adv7533: remove dynamic lane switching from adv7533 bridge")
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230319125524.58803-1-aford173@gmail.com

drm: bridge: adv7511: use dev_err_probe in probe function

adv7511 probe may need to be attempted multiple times before no
-EPROBE_DEFER is returned. Currently, every such probe results in
an error message:

[ 4.534229] adv7511 1-003d: failed to find dsi host
[ 4.580288] adv7511 1-003d: failed to find dsi host

This is misleading, as there is no error and probe deferral is normal
behavior. Fix this by using dev_err_probe that will suppress
-EPROBE_DEFER errors. While at it, we touch all dev_err in the probe
path. This makes the code more concise and included the error code
everywhere to aid user in debugging.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026125246.3188260-1-a.fatoum@pengutronix.de

drm/bridge: adv7533: remove dynamic lane switching from adv7533 bridge

adv7533 bridge tries to dynamically switch lanes based on the
mode by detaching and attaching the mipi dsi device.

This approach is incorrect because this method of dynamic switch of
detaching and attaching the mipi dsi device also results in removing
and adding the component which is not necessary.

This approach is also prone to deadlocks. So for example, on the
db410c whenever this path is executed with lockdep enabled,
this results in a deadlock due to below ordering of locks.

-> #1 (crtc_ww_class_acquire){+.+.}-{0:0}:
lock_acquire+0x6c/0x90
drm_modeset_acquire_init+0xf4/0x150
drmm_mode_config_init+0x220/0x770
msm_drm_bind+0x13c/0x654
try_to_bring_up_aggregate_device+0x164/0x1d0
__component_add+0xa8/0x174
component_add+0x18/0x2c
dsi_dev_attach+0x24/0x30
dsi_host_attach+0x98/0x14c
devm_mipi_dsi_attach+0x38/0xb0
adv7533_attach_dsi+0x8c/0x110
adv7511_probe+0x5a0/0x930
i2c_device_probe+0x30c/0x350
really_probe.part.0+0x9c/0x2b0
__driver_probe_device+0x98/0x144
driver_probe_device+0xac/0x14c
__device_attach_driver+0xbc/0x124
bus_for_each_drv+0x78/0xd0
__device_attach+0xa8/0x1c0
device_initial_probe+0x18/0x24
bus_probe_device+0xa0/0xac
deferred_probe_work_func+0x90/0xd0
process_one_work+0x28c/0x6b0
worker_thread+0x240/0x444
kthread+0x110/0x114
ret_from_fork+0x10/0x20

-> #0 (component_mutex){+.+.}-{3:3}:
__lock_acquire+0x1280/0x20ac
lock_acquire.part.0+0xe0/0x230
lock_acquire+0x6c/0x90
__mutex_lock+0x84/0x400
mutex_lock_nested+0x3c/0x70
component_del+0x34/0x170
dsi_dev_detach+0x24/0x30
dsi_host_detach+0x20/0x64
mipi_dsi_detach+0x2c/0x40
adv7533_mode_set+0x64/0x90
adv7511_bridge_mode_set+0x210/0x214
drm_bridge_chain_mode_set+0x5c/0x84
crtc_set_mode+0x18c/0x1dc
drm_atomic_helper_commit_modeset_disables+0x40/0x50
msm_atomic_commit_tail+0x1d0/0x6e0
commit_tail+0xa4/0x180
drm_atomic_helper_commit+0x178/0x3b0
drm_atomic_commit+0xa4/0xe0
drm_client_modeset_commit_atomic+0x228/0x284
drm_client_modeset_commit_locked+0x64/0x1d0
drm_client_modeset_commit+0x34/0x60
drm_fb_helper_lastclose+0x74/0xcc
drm_lastclose+0x3c/0x80
drm_release+0xfc/0x114
__fput+0x70/0x224
____fput+0x14/0x20
task_work_run+0x88/0x1a0
do_exit+0x350/0xa50
do_group_exit+0x38/0xa4
__wake_up_parent+0x0/0x34
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0x60/0x11c
do_el0_svc+0x30/0xc0
el0_svc+0x58/0x100
el0t_64_sync_handler+0x1b0/0x1bc
el0t_64_sync+0x18c/0x190

Due to above reasons, remove the dynamic lane switching
code from adv7533 bridge chip and filter out the modes
which would need different number of lanes as compared
to the initialization time using the mode_valid callback.

This can be potentially re-introduced by using the pre_enable()
callback but this needs to be evaluated first whether such an
approach will work so this will be done with a separate change.

changes since RFC:
- Fix commit text and add TODO comment

changes in v2:
- Fix checkpatch formatting errors

Fixes: 62b2f026cd8e ("drm/bridge: adv7533: Change number of DSI lanes dynamically")
Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/16
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://lore.kernel.org/r/1661797363-7564-1-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1665522649-3423-1-git-send-email-quic_abhinavk@quicinc.com

drm/bridge: adv7533: make array clock_div_by_lanes static const

Don't populate the read-only array clock_div_by_lanes on the stack but
instead it static const. Also makes the object code a little smaller.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220109204105.51878-1-colin.i.king@gmail.com

drm/bridge: adv7533: Switch to devm MIPI-DSI helpers

Let's switch to the new devm MIPI-DSI function to register and attach
our secondary device. This also avoids leaking the device when we detach
the bridge.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-2-maxime@cerno.tech

drm/dsi: Add _NO_ to MIPI_DSI_* flags disabling features

Many of the DSI flags have names opposite to their actual effects,
e.g. MIPI_DSI_MODE_EOT_PACKET means that EoT packets will actually
be disabled. Fix this by including _NO_ in the flag names, e.g.
MIPI_DSI_MODE_NO_EOT_PACKET.

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@samsung.com>
Reviewed-by: Xin Ji <xji@analogixsemi.com> # anx7625.c
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> # msm/dsi
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727094435.v3.1.I629b2366a6591410359c7fcf6d385b474b705ca2@changeid

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 and
only version 2 as published by the free software foundation this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 294 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: bridge: Constify mode arguments to bridge .mode_set() operation

The mode and ajusted_mode passed to the bridge .mode_set() operation
should never be modified by the bridge (and are not in any of the
existing bridge drivers). Make them const to make this clear.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: adv7511/33: add HDMI CEC support

Add support for HDMI CEC to the drm adv7511/adv7533 drivers.

The CEC registers that we need to use are identical for both drivers,
but they appear at different offsets in the register map.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171007104658.14528-3-hverkuil@xs4all.nl

drm: convert drivers to use of_graph_get_remote_node

Convert drivers to use the new of_graph_get_remote_node() helper
instead of parsing the endpoint node and then getting the remote device
node. Now drivers can just specify the device node and which
port/endpoint and get back the connected remote device node. The details
of the graph binding are nicely abstracted into the core OF graph code.

This changes some error messages to debug messages (in the graph core).
Graph connections are often "no connects" depending on the particular
board, so we want to avoid spurious messages. Plus the kernel is not a
DT validator.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Liviu Dudau <liviu.dudau@arm.com>
Tested-by: Eric Anholt <eric@anholt.net>
Tested-by: Jyri Sarha <jsarha@ti.com>
Tested by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>

drm/bridge: adv7511: Enable the audio data and clock pads on adv7533

This patch enables the Audio Data and Clock pads to the adv7533 bridge.
Without this patch audio can not be played.

Cc: David Airlie <airlied@linux.ie>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Andy Green <andy@warmcat.com>
Cc: Dave Long <dave.long@linaro.org>
Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1480382552-28219-3-git-send-email-john.stultz@linaro.org

drm/bridge: adv7511: add support for the 2nd chip

The Renesas Wheat board has 2 ADV7513 chips on the same I2C bus, however
the ADV751x driver only supports 1 chip as it tries to assign the packet/
EDID/CEC memory I2C devices to the fixed I2C addresses. Assign these I2C
addresses at the fixed offsets (derived from the programming guide) from
the main register map address instead.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1580212.O1LYdJFM97@wasted.cogentembedded.com

drm/bridge: adv7533: Change number of DSI lanes dynamically

Lower modes on ADV7533 require lower number of DSI lanes for correct
operation. If ADV7533 is being used with 4 DSI lanes, then switch the
lanes to 3 when the target mode's pixel clock is less than 80 Mhz.

Based on patch by Andy Green <andy.green@linaro.org>

Signed-off-by: Archit Taneja <architt@codeaurora.org>

drm/bridge: adv7533: Use internal timing generator

ADV7533 provides an internal timing generator for certain modes that it
can't use the DSI clock directly.

We've observed that HDMI is more stable with the internal timing
generator, especially if there are instabilities in the DSI clock source.
The data spec also seems to recommend the usage of the timing generator
for all modes.

However, on some platforms, it's reported that enabling the timing
generator causes instabilities with the HDMI output.

Create a DT parameter that lets a platform explicitly disable the timing
generator. The timing generator is enabled by default.

Signed-off-by: Archit Taneja <architt@codeaurora.org>

drm/bridge: adv7533: Create a MIPI DSI device

In order to pass DSI specific parameters to the DSI host, we need the
driver to create a mipi_dsi_device DSI device that attaches to the
host.

Use of_graph helpers to get the DSI host DT node. Create a MIPI DSI
device using this host. Finally, attach this device to the DSI host.

Populate DT parameters (number of data lanes for now) that are required
for DSI RX to work correctly. Hardcode few other parameters (rgb,
embedded_sync) for now.

Select DRM_MIPI_DSI config option only when ADV7533 support is enabled.

Signed-off-by: Archit Taneja <architt@codeaurora.org>

drm/bridge: adv7533: Initial support for ADV7533

ADV7533 is a DSI to HDMI encoder chip. It is a derivative of ADV7511,
with additional blocks to translate input DSI data to parallel RGB
data. Besides the ADV7511 I2C register map, it has additional registers
that require to be configured to activate the DSI Rx block.

Create a new config that enables ADV7533 support. Use DT compatible
strings to populate the ADV7533 type enum. Add minimal register
configurations belonging to the DSI/CEC register map. Keep the ADV7533
code in a separate file.

Originally worked on by Lars-Peter Clausen <lars@metafoo.de>

Signed-off-by: Archit Taneja <architt@codeaurora.org>