drm/amd/display: Generalize new minimal transition path

Previously the new minimal transition path was only used for windowed
MPO + ODM for plane scaling updates. However, we want to generalize the
transition for all cases whenever a non-seamless transition is detected
(such as for MPO -> SubVP + MPC).

To make this change we add pointers in the plane state, stream, and
pointers in the stream state to the dc_scratch state and backup and
restore these so the minimal transition can take place successfully.

Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: Add left edge pixel for YCbCr422/420 + ODM pipe split"

[Why/How]
A regression was identified with the change to add left edge pixel for
YCbCr422/420 + ODM combine cases.

This reverts commit 288c0254a0b0c9980dba9df7d5afadf27280b99c

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add left edge pixel for YCbCr422/420 + ODM pipe split

[Why]
Currently 3-tap chroma subsampling is used for YCbCr422/420. When ODM
pipesplit is used, pixels on the left edge of ODM slices need one extra
pixel from the right edge of the previous slice to calculate the correct
chroma value.

Without this change, the chroma value is slightly different than
expected. This is usually imperceptible visually, but it impacts test
pattern CRCs for compliance test automation.

[How]
Update logic to use the register for adding extra left edge pixel for
YCbCr422/420 ODM cases.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix dcn35 8k30 Underflow/Corruption Issue

[why]
odm calculation is missing for pipe split policy determination
and cause Underflow/Corruption issue.

[how]
Add the odm calculation.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix dcn35 8k30 Underflow/Corruption Issue

[why]
odm calculation is missing for pipe split policy determination
and cause Underflow/Corruption issue.

[how]
Add the odm calculation.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add more mechanisms for tests

[Why]
More information is desired for the test tools.

[How]
Refactored get_subvp_visual_confirm_color and
get_mclk_switch_visual_confirm_color to support the new method of
storing the p_state type, which was changed so that it could also be
saved and output by the DPM log. Ensured that the p_state type is kept
updated by looping through the pipes within commit_planes_for_stream.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Relja Vojvodic <relja.vojvodic@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactor phantom resource allocation

[WHY?]
Phantom streams and planes were previously not referenced explcitly on creation.

[HOW?]
To reduce memory management complexity, add an additional phantom streams and planes
reference into dc_state, and move mall_stream_config to stream_status inside
the state to make it safe to modify in shallow copies. Also consildates any logic
that is affected by this change to dc_state.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: update pixel clock params after stream slice count change in context

[why]
When ODM slice count is changed, otg master pipe's pixel clock params is
no longer valid as the value is dependent on ODM slice count.

Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactor DPG test pattern logic for ODM cases

[Why]
Current DPG test pattern logic does not account for ODM configuration
changes after test pattern has already been programmed. For example, if
ODM2:1 is enabled after test pattern is already being output, the second
pipe is not programmed to output test pattern, causing half the screen
to be black.

[How]
Move DPG test pattern parameter calculations into separate function.
Whenever ODM pipe configuration changes, re-calculate DPG test pattern
parameters and program DPG if test pattern is currently enabled.

Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Introduce DML2

DC is transitioning from DML to DML2, and this commit introduces all the
required changes for some of the already available ASICs and adds the
required code infra to support new ASICs under DML2. DML2 is also a
generated code that provides better mode verification and programming
models for software/hardware, and it enables a better way to create
validation tools. This version is more like a middle step to the
complete transition to the DML2 version.

Changes since V1:
- Alex: Fix typos

Changes since V2:
- Update DC includes

Changes since V3:
- Fix 32 bit compilation issues on x86

Changes since V4:
- Avoid compilation of DML2 on some not supported 32-bit architecture
- Update commit message

Co-developed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add new windowed mpo odm minimal transition sequence

[why]
We do not have a programming sequence to support seamless transition
between MPC combine to ODM combine when plane count remains the same.
This can happen with windowed MPO ODM use cases when plane scaling
is changed over ODM Combine's capability.

[How]
We are adding a programming sequence specifically to handle the transition
between MPC combine and ODM combine during plane scaling change.

Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN35 PG_CNTL

[Why & How]
Add PG_CNTL handling for DCN35.

Signed-off-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add new resource interface for acquiring sec opp heads and release pipe

[why]
We need a new algorithm for acquiring secondary opp heads for ODM combine
in dcn32 and a release pipe interface to properly release pipe resources.

[how]
add two new interfaces in DCN specific resource file.

Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DPIA Link Encoder Assignment Fix

For DPIA we should have preferred DIG assignment based on DPIA selected
as per the ASIC design.

Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Write flip addr to scratch reg for subvp

[Description]
SubVP needs to "calculate" the earliest in use META address
by using the current primary / meta addresses, but this leads
to a race condition where FW and driver can read/write the
address at the same time and intermittently produce inconsistent
address offsets. To mitigate this issue without locking (too slow),
save each surface flip addr into scratch registers and use this
to keep track of the earliest in use META addres.

Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DPIA Link Encoder Assignment Fix

For DPIA we should have preferred DIG assignment based on DPIA selected
as per the ASIC design.

Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/display: rename acquire_idle_pipe_for_layer to acquire_free_pipe_as_sec_dpp_pipe

[why]
Secondary DPP pipes are used for rendering secondary layers of planes.
The name "for layer" doesn't make it obvious. The function is acquiring
a free pipe as secondary dpp pipe only. We rename it so it is more obvious.
In a future follow up change, we want to add functions to acquire free pipe as
opp head pipe or otg master pipe as well. They will have their separate
allocation priority.

Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: update add plane to context logic with a new algorithm

[why]
Preivous algorithm for finding an optimal idle pipe for a new plane was
implemented to handle dynamic pipe allocation when MPO plane moves
from one ODM slice to the other. Now pipe allocation is more static so
it no longer depends on the MPO plane's position. We are simplifying
our logic and remove unnecessary handling in our code.

[how]
Apply a new simplified version of pipe resource allocation logic to reduce
unnecessary flip delay caused by swapping secondary dpp pipe to other
MPC blending tree.

Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add structs for Freesync Panel Replay

In some instances, the GPU is transmitting repeated frame to the sink
without any updates or changes in the content. These repeat transmission
are wasteful, resulting in power draw in different aspects of the system

1. DCN is fetching the frame of data from DF/UMC/DRAM. This memory traffic
prevents power down of parts of this HW path.

2. GPU is transmitting pixel data to the display through the main link of
the DisplayPort interface. This prevents power down of both the Source
transmitter (TX) and the Sink receiver (RX)

The concepts of utilizing replay is similar to PSR, but there is a benefit of:
Source and Sink remaining synchronized which allows for
- lower latency when switching from replay to live frames
- enable the possibility of more use cases
- easy control of the sink's refresh rate during replay

Due to Source and Sink remaining timing synchronized, Replay can be activated
in more UI scenarios.

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactor fast update to use new HWSS build sequence

[Description]
- Refactor HW sequencer to use a build / execute sequence
- Also move gamma updates to become fast

v2: squash in build fix ("drm/amd/display: Fix guarding of 'if (dc->debug.visual_confirm)'")

Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Make unbounded req update separate from dlg/ttu

[Description]
- Updates to unbounded requesting should not be conditional
on updates to dlg / ttu, as this could prevent unbounded
requesting from being updated if dlg / ttu does not change

Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add visual confirm color support for MCLK switch

[Why && How]
We would like to have visual confirm color support for MCLK switch.
1. Set visual confirm color to yellow: Vblank MCLK switch.
2. Set visual confirm color to cyan: FPO + Vblank MCLK
switch.
3. Set visual confirm color to pink: Vactive MCLK switch.

Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Drop CONFIG_DRM_AMD_DC_HDCP

[Why & How]
There is no reason we still need a config option for this.

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: break down dc_link.c

[why]
dc_link contains over 30k line of code, the decision is to break it
down to files residing in link folder based on functionality. This
change is the last break down change which will remove dc_link.c
file after everything is broken down.

[how]
Move remaining dc_link.c functions into link_detection, link_dpms,
link_validation, link_resource, and link_fpga and remove dc_link.

Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use DML for MALL SS and Subvp allocation calculations

MALL SS and Subvp use the same calculations for determining the size of
the required allocation for a given surface, which is already done in
DML. Add an interface to extract this information from VBA variables and
use in their respective helper functions. Also refactor existing code to
remove stale workarounds.

Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reorder dc_state fields to optimize clearing the struct

[why & how]
By moving bw_ctx field to the end of the dc_state the state can be
cleared more efficiently without resulting in large DML memcpy
operations, resulting in better mode enumeration performance on some
platforms.

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Retain phantom pipes when min transition into subvp (#7358)

[Description]
- When entering into a SubVP config that requires a minimal
transition we need to retain phantom pipes and also restore
the mall config
- This is because the min transition will remove phantom pipes
from the context (shallow copy) and not restore it's original
state
- This is just a workaround, and needs a proper fix

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Don't overwrite subvp pipe info in fast updates

[Description]
- This is a workaround to avoid concurrency issues -- a fast update
creates a shallow copy of the dc current_state, and removes all
subvp/phantom related flags.
- We want to prevent the fast update thread from removing those
flags in case there's another thread running that requires
the info for proper programming

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Retain phantom plane/stream if validation fails

[Description]
- If we fail validation, we should retain the phantom
stream/planes
- Full updates assume that phantom pipes will be fully
removed, but if validation fails we keep the phantom
pipes
- Therefore we have to retain the plane/stream if validation
fails (since the refcount is decremented before validation,
and the expectation is that it's fully freed when the old
dc_state is released)

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add kernel doc for commit sequence

Add basic kernel-doc that describes some of the struct and functions
that are part of the DC commit sequence..

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add kernel doc to some of the dc fields

Add kernel-doc to some important elements from DC struct that might help
to understand DC sequence.

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Expand kernel doc for DC

This commit adds extra documentation for elements related to FAMs.

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add a helper to map ODM/MPC/Multi-Plane resources

[Why & How]
Add a helper to map ODM/MPC/Multi-Plane resources from DC

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove OPTC lock check

At some point, we decided to blank HUBP during pixel data blank, and to
handle that, we added some OPTC lock checks. Later, we realized that
this change caused multiple regression, and we removed it. Nevertheless,
we still have some leftovers that might affect some ASIC behavior, and
this commit drops those changes to keep the code consistent.

Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactor edp ILR caps codes

We split out ILR config from "global" to "per-panel" config settings.

Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add basic kernel doc to CRC code under DC

Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add dc_ctx to link_enc_create() parameters

[Why&How]
Preparation to enable run time initialization of register offsets to add
dc_context to the link_enc_create callback. This is needed to get the
dc_ctx handle where register offset initialization routine is called.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix lag when moving windowed MPO across display using ODM 2:1 combine

[Why]
With single display odm 2:1 policy, when moving windowed MPO across
the display, we experience a momentary lag when we move between the
centre of the display and the right half of the display. This is
caused by the MPO pipe being reallocated when it crosses this
boundary

[How]
Handle two cases:
1. if the head pipe has a MPO pipe already allocated in the old
context, then use that pipe if it is available in the current
context
2. if the head pipe is on the left side, check the right side to
see if it has a MPO pipe already allocated. If so, don't use
that pipe if it is selected as the idle pipe in the current
context
Add new function pointer called .acquire_idle_pipe_for_head_pipe
that will pass in the head pipe and handle case 1
Add find_idle_secondary_pipe_check_mpo() to handle case 2
if we don't hit case 1.

In dc_add_plane_to_context(), start with head pipe and check
case 1 and 2 in call acquire_free_pipe_for_head().
If we are on the right side of the display, check case 1
again by passing in right side pipe as the new head in
call acquire_free_pipe_for_head().

Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: make enable link independent from verified link caps

[why]
Ideally link capability should be independent from the link
configuration that we decide to use in enable link. Otherwise if link
capability is changed after validation has completed, we could end up
enabling a link configuration with invalid configuration. This would
lead to over link bandwidth subscription or in the extreme case
causes us to enable HPO link to a DIO stream.

[how]
Add a new struct in pipe ctx called link config. This structure will
contain link configuration to enable a link. It will be populated
during map pool resources after we validate link bandwidth. Remove
the reference of verified link cap during enable link process and
use link config in pipe ctx instead.

Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add SubVP required code

This commit enables the SubVP feature. To achieve that, we need to:

- Don't force p-state disallow on SubVP (can't block dummy p-state)
- Send calculated watermark to DMCUB for SubVP
- Adjust CAB mode message to PMFW
- Add a proper locking sequence for SubVP
- Various fixes to SubVP static analysis and determining SubVP config
- Currently SubVP not supported with pipe split so merge all pipes
before setting up SubVp

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add dependant changes for DCN32/321

[Why&How]
This patch adds necessary changes needed in DC files outside DCN32/321
specific tree

v2: squash in updates (Alex)

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move FPU associated DCN30 code to DML folder

[why & how]
As part of the FPU isolation work documented in
https://patchwork.freedesktop.org/series/93042/, isolate
code that uses FPU in DCN30 to DML, where all FPU code
should locate.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Jasdeep Dhillon <jdhillon@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove redundant CONFIG_DRM_AMD_DC_DCN in dc

[Why & How]
CONFIG_DRM_AMD_DC_DCN is used by pass the compilation failures, but DC
code should be OS-agnostic.

This patch fixes it by removing unnecessasry CONFIG_DRM_AMD_DC_DCN
in dc and dc/core directories.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move link_hwss to link folder and break down to files

[why]
Move link_hwss to its own folder as part of DC LIB and break it down
to separate file one for each type of backend for code isolation.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Drop DCN for DP2.x logic

[Why & How]
DCN guard is not necessary for DP2.x relevant logic.
Drop them.

v2: squash in fix for misplaced #endif (Alex)

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix for otg synchronization logic

[Why]
During otg sync trigger, plane states are used to decide whether the otg
is already synchronized or not. There are scenarions when otgs are
disabled without plane state getting disabled and in such case the otg is
excluded from synchronization.

[How]
Introduced pipe_idx_syncd in pipe_ctx that tracks each otgs master pipe.
When a otg is disabled/enabled, pipe_idx_syncd is reset to itself.
On sync trigger, pipe_idx_syncd is checked to decide whether a otg is
already synchronized and the otg is further included or excluded from
synchronization.

v2:
Don't drop is_blanked logic

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Mustapha Ghaddar <mustapha.ghaddar@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: meenakshikumar somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: torvalds@linux-foundation.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: Fix for otg synchronization logic"

This reverts commit a896f870f8a5f23ec961d16baffd3fda1f8be57c.

It causes odd flickering on my Radeon RX580 (PCI ID 1002:67df rev e7,
subsystem ID 1da2:e353).

Bisected right to this commit, and reverting it fixes things.

Link: https://lore.kernel.org/all/CAHk-=wg9hDde_L3bK9tAfdJ4N=TJJ+SjO3ZDONqH5=bVoy_Mzg@mail.gmail.com/
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Jun Lei <Jun.Lei@amd.com>
Cc: Mustapha Ghaddar <mustapha.ghaddar@amd.com>
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: meenakshikumar somasundaram <meenakshikumar.somasundaram@amd.com>
Cc: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drm/amd/display: get and restore link res map

[why]
When reboot the link res map should be persisted. So during boot up,
driver will look at the map to determine which link should take priority
to use certain link res. This is to ensure that link res remains
unshuffled after a reboot.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: support dynamic HPO DP link encoder allocation

[why]
When there are more DP2.0 RXs connected than the number HPO DP link
encoders we have, we need to dynamically allocate HPO DP link encoder to
the port that needs it.

[how]
Only allocate HPO DP link encoder when it is needed.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: populate link res in both detection and validation

[why]
This commit is to populate link res in preparation of the next commit.
The next commit will replace all existing code to use link res instead

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: define link res and make it accessible to all link interfaces

[why]
There will be a series of re-arch changes in Link Resource Management.
They are more and more muxable link resource objects and the resource is
insufficient for a one to one allocation to all links created.
Therefore a link resource sharing logic is required to determine which
link should use certain link resource.

This commit is the first one in this series that starts by defining a
link resource struct, this struct will be available to all interfaces
that need to perform link programming sequence.

In later commits, we will granduately decouple link resource objects out
of dc link. So instead of access a link resource from dc link. Current
link's resource can be accessible through pipe_ctx->link_res during
commit, or by calling dc_link_get_cur_link_res function with current
link passed in after commit.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix for otg synchronization logic

[Why]
During otg sync trigger, plane states are used to decide whether the otg
is already synchronized or not. There are scenarions when otgs are
disabled without plane state getting disabled and in such case the otg is
excluded from synchronization.

[How]
Introduced pipe_idx_syncd in pipe_ctx that tracks each otgs master pipe.
When a otg is disabled/enabled, pipe_idx_syncd is reset to itself.
On sync trigger, pipe_idx_syncd is checked to decide whether a otg is
already synchronized and the otg is further included or excluded from
synchronization.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Mustapha Ghaddar <mustapha.ghaddar@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: meenakshikumar somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: USB4 DPIA enumeration and AUX Tunneling

[WHY]
To enable dc links for USB4 DPIA ports and AUX command tunneling
for YELLOW_CARP_B0.

[HOW]
1) Created dc links for all USB4 DPIA ports in create_links().
dc_link_construct() implementation is split for legacy DDC and DPIAs.
As usb4 has no ddc, ddc->ddc_pin will be set to NULL for its dc link
and this parameter will be used to identify the dc links as DPIA. The
dc link for DPIA is further to be enhanced with implementation for link
encoder and link initialization.
2) usb4_dpia_count in struct resource_pool will be initialized to 4 in
dcn31_resource_construct() if the DCN is YELLOW_CARP_B0.
3) Enabled DMUB AUX via outbox for YELLOW_CARP_B0.

Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update link encoder object creation.

[Why & How]
USB4 endpoints are dynamically mapped. We create additional link
encoders for USB4 use when DC is created and destroy them when DC
is destructed

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix dynamic encoder reassignment

[Why]
Incorrect encoder assignments were being used while applying a new state
to hardware.

(1) When committing a new state to hardware requires resetting the
back-end, the encoder assignments of the current or old state should be
used when disabling the back-end; and the encoder assignments for the
next or new state should be used when re-enabling the back-end.

(2) Link training on hot plug could take over an encoder already in use
by another stream without first disabling it.

[How]

(1) Introduce a resource context 'link_enc_cfg_context' which includes:
- a mode to indicate when transitioning from current to next state.
- transient encoder assignments to use during this state transition.

Update the encoder configuration interface to respond to queries about
encoder assignment based on the mode of operation.

(2) Check if an encoder is already in use before attempting to perform
link training on hot plug.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Allocate structs needed by dcn_bw_calc_rq_dlg_ttu in pipe_ctx

[Why & How]
dcn_bw_calc_rq_dlg_ttu uses a stack frame great than 1024. To solve this
we could allocate the rq_param, dlg_sys_param, and input structs
dynamically. Since this function is inside a kernel_fpu_begin()/end()
call we want to avoid memory allocation. Instead it's much
safer to pre-allocate these on the pipe_ctx.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Fixes: 3fe617ccafd6 ("Enable '-Werror' by default for all kernel builds")
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Xinhui Pan <Xinhui.Pan@amd.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: llvm@lists.linux.dev
Acked-by: Christian König <christian.koenig@amd.com>
Build-tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DP 2.0 HPO Link Encoder

HW Blocks:

+--------+ +-----+ +------+
| OPTC | | HDA | | HUBP |
+--------+ +-----+ +------+
| | |
| | |
HPO ====|==========|========|====
| | v |
| | +-----+ |
| | | APG | |
| | +-----+ |
| | | |
| v v v
| +---------------------+
| | HPO Stream Encoder |
| +---------------------+
| |
| v
| +--------------------+
| | HPO Link Encoder |
v +--------------------+

[squash in warning fixes - Alex]

Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DP 2.0 HPO Stream Encoder

HW Blocks:

+--------+ +-----+ +------+
| OPTC | | HDA | | HUBP |
+--------+ +-----+ +------+
| | |
| | |
HPO ====|==========|========|====
| | v |
| | +-----+ |
| | | APG | |
| | +-----+ |
| | | |
v v v v
+----------------------+
| HPO Stream Encoder |
+----------------------+

[squash in warning fixes - Alex]

Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: fold DRM_AMD_DC_DCN3_1 into DRM_AMD_DC_DCN

No need for a separate flag now that DCN3.1 is not in bring up.
Fold into DRM_AMD_DC_DCN like previous DCN IPs.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN3.1 DCHHUB

Adds DCN3.1 DCHHUB programming and modifies DCN20/DCN30 shared
hardware sequencer helpers to use these hooks.

HW Blocks:

+--------++------+ +----------+
|DCHUBBUB|| HUBP | <-- | MMHUBBUB |
+--------++------+ +----------+
| ^
v |
+--------+ +--------+
| DPP | <---------> | DWB |
+--------+ +--------+
| ^
v |
+--------+ |
| MPC | |
+--------+ |
| |
v |
+-------+ |
| OPP | |
+-------+ |
| |
v |
+--------+ /
| OPTC | --------------
+--------+
|
v
+--------+ +--------+
| DIO | | DCCG |
+--------+ +--------+

No changes to MMHUBBUB or DWB programming, added to diagram for clarity.

Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add dynamic link encoder selection.

[Why]
Some display endpoints may be programmably mapped to compatible link
encoders. The assignment of link encoders to links has to be dynamic to
accommodate the increased flexibility in comparison to conventional
display endpoints.

[How]
- Add link encoder assignment tracking variables.
- Execute link encoder assignment algorithm before enabling link and
release link encoders from links once they are disabled.

Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix dcn3+ bw validation soc param update sequence

SOC needs to be updated to the WM set A values before validation
happens.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update link encoder object creation

[Why]
Currently the creation of link encoder objects is tightly coupled to the
creation of link objects. Decoupling link encoder object creation is a
preliminary step in the process of allowing link encoders to be
dynamically assigned to links.

[How]
Add "minimal" link encoder objects which are not associated with any
link until required.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: enable HUBP blank behaviour

- Reverts "drm/amd/display: Revert HUBP blank behaviour for now"
- Hubp blank will fail if the pipe is locked (this is the case on
linux), so add a check to make sure pipe isn't locked, if it is then
defer the blank to post_unlock.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Prevent freesync power optimization during validation

[Why]
Due to the freesync power optimization increasing vtotal, the driver
believes that MPO is supported. MPO is turned on. Freesync then
exits, MPO can no longer be supported and immediate flip fails. This
causes corruption on the panel.

[How]
Avoid the freesync optimization when doing validation so in the case
freesync exits, driver can still support the configuration.

Signed-off-by: Isabel Zhang <isabel.zhang@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fold CONFIG_DRM_AMD_DC_DCN3* into CONFIG_DRM_AMD_DC_DCN (v3)

Avoids confusion in configurations.

v2: fix build when CONFIG_DRM_AMD_DC_DCN is disabled
v3: rebase on latest code

Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Calc DLG from dummy p-state if full p-state unsupported

[Why]
Currently, when full p-state changes are not supported, DLG parameters
are calculated for no p-state support at all. However, we are required
to always support dummy p-state changes, so we should instead calculate
DLG based on dummy p-state latency when full p-state is unsupported.
This behaviour already exists for DCN2.

[How]
- move DLG calculation inside WM calculation
- if p-state unsupported, do not recalculate for set A, instead copy from
set C, and perform DLG calculation with dummy p-state latency

Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: implement notify stream mask

[Why]
Send stream active state info to DMUB

[How]
Implement GPINT to notify stream mask

Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: adding pathway to retrieve stutter period

why:
some functions may need be dependent on stutter period in the future

how:
Extract from stutter calculations and place into perf_params structure

Signed-off-by: Martin Leung <martin.leung@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Detect plane change when detect pipe change.

[Why]
If plane has changed, dcn20_detect_pipe_changes doesn't update dc_plane_state->update_flags, and the following dcn20_program_pipe can't reprogram hubp correctly.

[How]
Add a new flags bit "plane_changed" in pipe_ctx->update_flags.If old plane isn’t identical to new plane, this bit will be set and guide “dcn20_program_pipe” to programing HUBP correctly.

Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Make new dc interface for adding dsc resource

[Why]
dcn20_add_dsc_to_stream_resource is accessed in amdgpu_dm directly.
This creates build error for configuration with DCN disabled.

[How]
Make the function available through a resource pool function so
that dcn20 function need not be called directly.

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: make calculate watermarks a function pointer

To allow code reuse with minimal duplication watermark
calculation needs to be function pointer.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN3 Resource

Add support for managing resources for DCN3

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN3 HWSEQ

Add HW sequence programing for DCN3

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: change from panel to panel cntl

[Why]
it doesn't represent panel specifically, it's more like the control
logic for the panel

[How]
change from panel to panel cntl to make it a bit more clear

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move panel power seq to new panel struct

[Why]
panel power sequencer is currently just sitting in hwseq but it really
it tied to internal panels

[How]
make a new panel struct to contain power sequencer code

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add worst case dcc meta pitch to fake plane

[why]
When we have single channel memory, we can not light up 2 4k displays
with a 1080p edp, because we don't have enough bw by a small margin.
this small margin comes from dcc meta being too large. We however don't
have this dcc meta when we create fake planes so, before the flip we
will not filter out the mode for 2 4k displays with a 1080p edp

[how]
Change get_default_swizzle_mode to something more general so we don't
end up with a separate function for every missing field in the fake
plane. Add a reasonable dcc meta to the fake plane when it is filled in,
so we filter out modes that don't have enough bandwidth. To do this, we
take the screen width and align it to 1024(8k 60)

Signed-off-by: Joseph Gravenor <joseph.gravenor@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Driverside changes to support PSR in DMCUB

[Why]
Moving PSR from DMCU to DMCUB.

[How]
Add driverside PSR changes required to send inbox messages to fw.
These changes are non-functional until the psr structure allocation
is uncommented.

Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Changes in dc to allow full update in some cases

Changes in dc to allow for different cases where full update is
required.

Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: rename DCN1_0 kconfig to DCN

Since dcn20 and dcn21 are under dcn1 it doesnt make sense to
have it named dcn1.

Change it to "dcn" to make it generic

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Drop CONFIG_DRM_AMD_DC_DCN2_1 flag

[Why]

DCN21 is stable enough to be build by default. So drop the flags.

[How]

Remove them using the unifdef tool. The following commands were executed
in sequence:

$ find -name '*.c' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DCN2_1 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_1 '{}' ';'
$ find -name '*.h' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DCN2_1 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_1 '{}' ';'

In addition:

* Remove from kconfig, and replace any dependencies with DCN1_0.
* Remove from any makefiles.
* Fix and cleanup Renoir definitions in dal_asic_id.h
* Expand DCN1 ifdef to include DCN21 code in the following files:
* clk_mgr/clk_mgr.c: dc_clk_mgr_create()
* core/dc_resources.c: dc_create_resource_pool()
* gpio/hw_factory.c: dal_hw_factory_init()
* gpio/hw_translate.c: dal_hw_translate_init()

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Drop CONFIG_DRM_AMD_DC_DCN2_0 and DSC_SUPPORTED

[Why]

DCN2 and DSC are stable enough to be build by default. So drop the flags.

[How]

Remove them using the unifdef tool. The following commands were executed
in sequence:

$ find -name '*.c' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DSC_SUPPORT -DCONFIG_DRM_AMD_DC_DCN2_0 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_0 '{}' ';'
$ find -name '*.h' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DSC_SUPPORT -DCONFIG_DRM_AMD_DC_DCN2_0 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_0 '{}' ';'

In addition:

* Remove from kconfig, and replace any dependencies with DCN1_0.
* Remove from any makefiles.
* Fix and cleanup NV defninitions in dal_asic_id.h
* Expand DCN1 ifdef to include DCN2 code in the following files:
* clk_mgr/clk_mgr.c: dc_clk_mgr_create()
* core/dc_resources.c: dc_create_resource_pool()
* dce/dce_dmcu.c: dcn20_*lock_phy()
* dce/dce_dmcu.c: dcn20_funcs
* dce/dce_dmcu.c: dcn20_dmcu_create()
* gpio/hw_factory.c: dal_hw_factory_init()
* gpio/hw_translate.c: dal_hw_translate_init()

Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add oem i2c implemenation in dc

[why]
Need it for some OEM I2C devices in Nv10

[how]
Link up code to parse OEM table and expose DC interface
to access the pins

Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unused code

Commit hints are unnecessary after front end programming redesign.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update hdcp display config

[Why]
We need to update the hdcp display parameter whenever the link is
updated, so the next time there is an update to hdcp we have the
latest display info

[How]
Create a callback, and use this anytime there is a change in the link. This will
be used later by the dm.

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Revert fixup DPP programming sequence

[WHY]
This change was made because DTO programming was double-buffered, which
is itself an issue. After deactivating the DTO double buffer, this
change becomes unnecessary.

Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add dcn21 core DC changes

Add missing parameters, to make dcn21 compile
without errors

Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: call update_bw_bounding_box

call update_bw_bounding_box in DC construct

Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix audio endpoint not getting disabled issue

[Why]
Disable_audio_stream gets enum option as a paramenter which will decide
if we free acquired resources or not. However checks for the option is
guarded by the other condition which check if audio stream is getting
diabled more than once. With both conditions combined, if we attempt to
disable audio stream twice in a row, first with keep and second with
free as an option, we will never free any resources, which will make
system think there is audio endpoint connected even after we plug out
the device

[How]
Get rid of option as parameter to disable_audio_stream and move the part
of the code that free acquired resources to outside where to keep or to
free resources is actually determined

Signed-off-by: Su Sung Chung <Su.Chung@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: re structure odm to allow 4 to 1 support

Currently odm is handled using top_bottom pipe by special casing
the differing opps to differentiate from mpc combine.

Since top/bottom pipe list was made to track mpc muxing this creates
difficulties in adding a 4 pipe odm case support.

Rather than continue using mpc combine list, this change reworks odm
to use it's own linked list to keep track of odm combine pipes. This
also opens up options for using mpo with odm, if a practical use case
is ever found.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix dcn20 global sync dml param extraction

Currently the paremeters are extracted as if dml is calculating
using pipes as we pass them in. in reality, dml internally merges
pipes into planes if pipe split is detected.

This change adds reverse logic to dcn20_calculate_dlg_params so
that the global sync parameters can be correctly extracted for
all the pipes when pipe split is enabled.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fixup DPP programming sequence

[why]
DC does not correct account for the fact that DPP DTO is double buffered while DPP ref is not.
This means that when DPP ref clock is lowered when it's "safe to lower", the DPP blocks that need
an increased divider will temporarily have actual DPP clock drop below minimum while DTO
double buffering takes effect. This results in temporary underflow.

[how]
To fix this, DPP clock cannot be programmed atomically, but rather be broken up into the DTO and the
ref. Each has a separate "safe to lower" logic. When doing "prepare" the ref and dividers may only increase.
When doing "optimize", both may decrease. It is guaranteed that we won't exceed max DPP clock because
we do not use dividers larger than 1.

Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Increase size of audios array

[Why]
The audios array defined in "struct resource_pool" is only 6 (MAX_PIPES)
but the max number of audio devices (num_audio) is 7. In some projects,
it will run out of audios array.

[How]
Incraese the audios array size to 7.

Signed-off-by: Tai Man <taiman.wong@amd.com>
Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Increase size of audios array

[Why]
The audios array defined in "struct resource_pool" is only 6 (MAX_PIPES)
but the max number of audio devices (num_audio) is 7. In some projects,
it will run out of audios array.

[How]
Incraese the audios array size to 7.

Signed-off-by: Tai Man <taiman.wong@amd.com>
Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: decouple dsc adjustment out of enablement

[why]
dsc adjustment is allowed via stream update sequence.
dsc enablement is only allowed via commit stream sequence.
with the current unified dsc set function, it is hard
to determine which sequence it is called by.
The solution is to decouple dsc adjustment out of enablement
sequence so we can handle them separately.

[how]
decouple dsc adjustment out of enablement.

Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix LB BPP and Cursor width

DCN2.0 LB BPP should be 48 or 16BPC and max cursor width should be 256.

Also use populate_dml_pipes as functions pointer instead of using it directly

Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Acquire DSC HW resource only if required by stream

[why]
There are ASICs that have fewer DSC engines than pipes, which makes
DSC a resource that should be used only if required.

[how]
Acquire DSC HW resource if required by stream and release when not
required anymore.

Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move dsc clock from plane_resource to stream_resource

code restructure.

Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DSC support for Navi (v2)

Add support for DCN2 DSC (Display Stream Compression)

HW Blocks:

+--------++------+ +----------+
| HUBBUB || HUBP | <-- | MMHUBBUB |
+--------++------+ +----------+
| ^
v |
+--------+ +--------+
| DPP | | DWB |
+--------+ +--------+
|
v ^
+--------+ |
| MPC | |
+--------+ |
| |
v |
+-------+ +-------+ |
| OPP | <--> | DSC | |
+-------+ +-------+ |
| |
v |
+--------+ /
| OPTC | --------------
+--------+
|
v
+--------+ +--------+
| DIO | | DCCG |
+--------+ +--------+

v2: rebase (Alex)

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN2 DWB

Add support to program the DCN2 DWB (Display Writeback)

HW Blocks:

+--------++------+ +----------+
| HUBBUB || HUBP | <-- | MMHUBBUB |
+--------++------+ +----------+
| ^
v |
+--------+ +--------+
| DPP | | DWB |
+--------+ +--------+
|
v ^
+--------+ |
| MPC | |
+--------+ |
| |
v |
+-------+ |
| OPP | |
+-------+ |
| |
v |
+--------+ /
| OPTC | --------------
+--------+
|
v
+--------+ +--------+
| DIO | | DCCG |
+--------+ +--------+

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: make clk mgr soc specific

[Why]
First step of refactoring clk mgr to better handle different
ways of handling clock operations. Clock operation policies are
soc specific and not just DCN vesion specific. It is not a hw resource,
should not be in the resource pool.

[How]
Change clock manager creation to be based on HW internal ID, rename
clock manager members to be more clear. Move clock manager out of
resource.

Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Engine-specific encoder allocation

[WHY]
From DCE110 onward, we have the ability to assign DIG BE and FE
separately for any display connector type; before, we could only do this
for DP.

Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add null checks and set update flags

* add plane state null checks
* add and set update surface flags

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove deprecated pplib interface

[Why]
The new interface now replaces the old interface for all known
configurations.

Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add fast_validate parameter

Add a fast_validate parameter in dc_validate_global_state for future use

Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix clk_mgr naming

clk_mgr is called dccg in dc_state, this change fixes that

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix multi-thread writing to 1 state

[Why]
Multiple threads were writing back to one global VBA in DC resulting
in multiple threads overwriting eachother's data

[How]
Add an instance of DML (which contains VBA) to each context and
change all calls that used dc->dml to use context->dml. Created a
seperate copy constructor for linux in a case where there is no
access to DC.

Signed-off-by: Aidan Wood <Aidan.Wood@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use dc_is_hdmi_signal() instead of ENUM

Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix up reference clock abstractions

[why]
"reference clock" is a very overloaded variable in DC and causes confusion
as there are multiple sources of reference clock, which may be different values
incorrect input values to DML will cause DCHUB to be programmed improperly
and lead to hard to debug underflow issues

[how]
instead of using ref clock everywhere, specify WHICH ref clock:
- xtalin
- dccg refclk
- dchub refclk

these are all distinct values which may not be equal

Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: David Francis <David.Francis@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Free DCN version of stream encoder

Cross a TODO item off the list. Cleanup SIGNAL_TYPE_HDMI_FRL, it's
not currently supported.

Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add full update commit hint struct

In some cases we might need to do a full update. Add a commit_hints
struct for future use

Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: PPLIB Hookup

[Why]
Make dml and integration with pplib clearer.

[How]
Change the way the dml formula is initialized to make its values more
clear. Restructure DC interface with pplib into rv_funcs.
Cap clocks received from pplib.

Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Change from aux_engine to dce_aux

[Why]
The aux_engine struct is needlessly complex and
is defined multiple times. It contains function pointers
that each have only one version and are called only from
inside dce_aux.

[How]
Replace aux_engine with a new struct called dce_aux.
Remove all function pointers and call functions directly.
Remove unused functions

Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add dsclk to pipe bw struct

This will allow us to program dscclk to required value

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Start documentation of DC

[Why]
There are a lot of unintuitive parts of the dm-dc interface.
It would help us if these were documented to provide
a common understanding of what they are supposed to do

[How]
Most of this documentation is stubs, to be filled out more
thoroughly by the experts

Not every dm-accessible function and struct is mentioned.
Simple functions like getters, setters, retain, release,
create, destroy can be left unadorned.

Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add dccg block

This adds the hw block as well as hooks up dppclk dto
programming

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: rename dccg to clk_mgr

In preparation for adding the actual dccg block since the
current implementation of dccg is mor eof a clock manager
than a hw block

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: split dccg clock manager into asic folders

Currently dccg contains code related to every dcn revision in
a single file.

This change splits out the dcn parts of code into correct folders

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move pplib/smu notification to dccg block

This is done to clear up the clock programming sequence
since the only time we need to notify pplib is after
clock update.

This also renames the clk block to dccg, at the moment
this block contains both clock management and dccg
functionality.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Calculate swizzle mode using bpp during validation

[Why]
Previously bandwidth validation was failing because swizzle mode was not
initialized during plane_state allocation. The swizzle mode was
calculated using pixed format which is how swizzle mode is initially
calculated in addrlib.

[How]
* Set default swizzle mode for validation to DC_SW_UNKNOWN
* Created new function in dcn10_assign_swizzle_mode which sets the
plane swizzle mode based on selected pixed format
* Added the call of assign_swizzle_mode into dc_validate_global_state
* Set failsafe swizzle mode back to DC_SW_LINEAR

Signed-off-by: Su Sung Chung <Su.Chung@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reorder resource_pool to put i2c with aux

[Why]
The i2c and aux engines are similar, and should be placed
next to eachother for readability

[How]
Reorder the elements of the resource_pool struct

Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Create new i2c resource

[Why]
I2C code did not match dc resource model and was generally
unpleasant

[How]
Move code into new svelte dce_i2c files, replacing various i2c
objects with two structs: dce_i2c_sw and dce_i2c_hw. Fully split
sw and hw code paths. Remove all redundant declarations. Use
address lists to distinguish between versions. Change dce80 code
to newer register access macros.

Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu/display: Replace CONFIG_DRM_AMD_DC_DCN1_0 with CONFIG_X86"

This reverts commit 8624c3c4dbfe24fc6740687236a2e196f5f4bfb0.

We need CONFIG_DRM_AMD_DC_DCN1_0 to guard code that is using fp math.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: make dp_ss_off optional

dp_ss_off flag doesn't need to be set, so we create a link_init
function if it is needed by an asic

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: flatten aux_engine and engine

[Why]
engine and aux_engine are unnecessary layers we want to remove this
layer.

[How]
flatten engine and aux engine structs into one struct called
aux_engine and remove all references to the engine struct.

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Decouple aux from i2c

[Why]
Aux engine is created from i2caux layer. We want to remove this layer
and use the engine directly.

[How]
Decouple aux engine from i2caux. Move aux engine related code to dce folder and use
dc resource pool to manage the engine. And use the engine functions directly

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: Replace CONFIG_DRM_AMD_DC_DCN1_0 with CONFIG_X86

Allowing CONFIG_DRM_AMD_DC_DCN1_0 to be disabled on X86 was an
opportunity for display with Raven Ridge accidentally not working.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove dentist_vco_freq from resource_pool

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: get rid of cur_clks from dcn_bw_output

Cleans up dcn_bw_output to only contain calculated info,
actual programmed values will now be stored in respective blocks.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: rename display clock block to dccg

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add dentist frequency to resource pool

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: drop dc_validate_guaranteed

Block FP16 scaling in validate_resources codepath.

Signed-off-by: Julian Parkin <jparkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Adding stutter entry wm to dce bw struct

Adding the stutter_entry_wm object to dce_bw_output struct
and populating it with bw calculations data

Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Varibright fix bug and review comments

Fix bug and make changes from review 132656

Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add diags clock programming

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add per pipe dppclk

v2: Fix commit title

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add timing generator count to resource pool.

Use tg count in resource pool for further reference.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Define remove_stream_from_ctx resource func

This will allow us to clean up resources on a stream as needed.

Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use real BE and FE index to program regs.

In case of some pipes are fused, pipe_idx should not
be used to program pipe regs. Instead of that, BE and FE
inst number should be used for reg index.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove dwbc from pipe_ctx

Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add dppclk to dcn_bw_clocks

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: create new structure for hubbub

instantiating new structure hubbub in resource.c

Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: rename transform to dpp for dcn

Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: rename struct mem_input to hubp for dcn

Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add max_video_width cap to dc

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: audio dynamic resource acquired related

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/dc: use kref for dc_state.

I'm not a huge fan of those copying around refcounts bits, might
want to consider alternates, but this should work for now.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/dc: drop hw_sequencer_types.h

This isn't used or required.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove DWB

It's not in a good shape and currently completely unused.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: No need to keep track of unreffed clk sources

This simplifies clock source reprogramming a bit.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Power down clock source at commit

Still one more in dc_validate_global

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move dis_clk into dc_state.

dis_clk is single instance across pipes.

Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Rename dc validate_context and current_context

Rename all the dc validate_context to dc_state and
dc current_context to current_state.

Signed-off-by: Jerry Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Per plane validation context build.

Introduce add/remove plane to/from context.
Make DC wrapper to use them in WIndows/Diags.
Use them in dc_update_surface_to_stream.
Call add/remove plane from Linux DM.

Remove dc_validation_set from dc_validate_global_state interface
and by this remove clean Linux DM from using it.

Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: retire dm_pp_apply_clock_for_voltage_request

set dcfclk and fclk req with pp_smu_display_requirement_rv

Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Per stream validate_context build v2.

Until now new context would start as empty, then populated
with exsisting pipes + new. Now we start with duplication
of existing context and then add/delete from the context
pipes as needed.

This allows to do a per stream resource
population, start discarding dc_validation_set
and by this brings DC closer to to DRM.

v2: Add some fixes and rebase.

Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: refactor pplib/smu communication

new per SoC interface instead legacy interface with lots of un-used
field that only cause confusion

model pp_smu like one of our HW objects with func_ptr interface
to call into it. struct pp_smu as handle to call pp/smu

Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Flattening core_dc to dc

-Flattening core_dc to dc

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add display write back(DWB)

Signed-off-by: Duke Du <Duke.Du@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use atomic types for ref_count

Current ref_count inc/dec is not guarded by locks which leads to
a raced condition where two threads try to access the variable
at the same time. In this case, both might act on the same cached
value and inc/dec from the same value, rather than inc/dec by 2.

Signed-off-by: Jerry Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move encoder_info_frame to stream_res

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i
's/pipes->encoder_info_frame/pipes->stream_res\.encoder_info_frame/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i
's/pipe_with_clk_src->encoder_info_frame/pipe_with_clk_src->stream_res\.encoder_info_frame/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i
's/ctx->encoder_info_frame->/ctx->stream_res\.encoder_info_frame->/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i
's/pipe->encoder_info_frame/pipe->stream_res\.encoder_info_frame/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i
's/pipe_ctx->encoder_info_frame/pipe_ctx->stream_res\.encoder_info_frame/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_ctx\[pipe_offset\]\.encoder_info_frame/pipe_ctx\[pipe_offset\]\.stream_res\.encoder_info_frame/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/grouped_pipes\[i\]->encoder_info_frame/grouped_pipes\[i\]->stream_^Cs\.encoder_info_frame/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/grouped_pipes\[0\]->encoder_info_frame/grouped_pipes\[0\]->stream_res\.encoder_info_frame/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/grouped_pipes\[1\]->encoder_info_frame/grouped_pipes\[1\]->stream_res\.encoder_info_frame/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_ctx\[i\]->encoder_info_frame/pipe_ctx\[i\]->stream_res\.encoder_info_frame/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_ctx_old->encoder_info_frame/pipe_ctx_old->stream_res\.encoder_info_frame/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_set\[j\]->encoder_info_frame/pipe_set\[j\]->stream_res\.encoder_info_frame/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_ctx\[i\]\.encoder_info_frame/pipe_ctx\[i\]\.stream_res\.encoder_info_frame/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipes\[i\]\.encoder_info_frame/pipes\[i\]\.stream_res\.encoder_info_frame/g'

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move pix_clk_params into stream_res

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i
's/pipes->pix_clk_params/pipes->stream_res\.pix_clk_params/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i
's/pipe_with_clk_src->pix_clk_params/pipe_with_clk_src->stream_res\.pix_clk_params/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i
's/ctx->pix_clk_params->/ctx->stream_res\.pix_clk_params->/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/pipe->pix_clk_params/pipe->stream_res\.pix_clk_params/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i
's/pipe_ctx->pix_clk_params/pipe_ctx->stream_res\.pix_clk_params/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_ctx\[pipe_offset\]\.pix_clk_params/pipe_ctx\[pipe_offset\]\.stream_res\.pix_clk_params/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/grouped_pipes\[i\]->pix_clk_params/grouped_pipes\[i\]->stream_^Cs\.pix_clk_params/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/grouped_pipes\[0\]->pix_clk_params/grouped_pipes\[0\]->stream_res\.pix_clk_params/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/grouped_pipes\[1\]->pix_clk_params/grouped_pipes\[1\]->stream_res\.pix_clk_params/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_ctx\[i\]->pix_clk_params/pipe_ctx\[i\]->stream_res\.pix_clk_params/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_ctx_old->pix_clk_params/pipe_ctx_old->stream_res\.pix_clk_params/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_set\[j\]->pix_clk_params/pipe_set\[j\]->stream_res\.pix_clk_params/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_ctx\[i\]\.pix_clk_params/pipe_ctx\[i\]\.stream_res\.pix_clk_params/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipes\[i\]\.pix_clk_params/pipes\[i\]\.stream_res\.pix_clk_params/g'

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move audio to stream_res

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/pipes->audio/pipes->stream_res\.audio/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i
's/pipe_with_clk_src->audio/pipe_with_clk_src->stream_res\.audio/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/ctx->audio->/ctx->stream_res\.audio->/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/pipe->audio/pipe->stream_res\.audio/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/pipe_ctx->audio/pipe_ctx->stream_res\.audio/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_ctx\[pipe_offset\]\.audio/pipe_ctx\[pipe_offset\]\.stream_res\.audio/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/grouped_pipes\[i\]->audio/grouped_pipes\[i\]->stream_^Cs\.audio/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/grouped_pipes\[0\]->audio/grouped_pipes\[0\]->stream_res\.audio/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/grouped_pipes\[1\]->audio/grouped_pipes\[1\]->stream_res\.audio/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_ctx\[i\]->audio/pipe_ctx\[i\]->stream_res\.audio/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_ctx_old->audio/pipe_ctx_old->stream_res\.audio/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_set\[j\]->audio/pipe_set\[j\]->stream_res\.audio/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_ctx\[i\]\.audio/pipe_ctx\[i\]\.stream_res\.audio/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipes\[i\]\.audio/pipes\[i\]\.stream_res\.audio/g'

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move stream_enc to stream_res

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/pipes->stream_enc/pipes->stream_res\.stream_enc/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/ctx->stream_enc->/ctx->stream_res\.stream_enc->/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/pipe->stream_enc/pipe->stream_res\.stream_enc/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/pipe_ctx->stream_enc/pipe_ctx->stream_res\.stream_enc/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_ctx\[pipe_offset\]\.stream_enc/pipe_ctx\[pipe_offset\]\.stream_res\.stream_enc/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/grouped_pipes\[i\]->stream_enc/grouped_pipes\[i\]->stream_^Cs\.stream_enc/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/grouped_pipes\[0\]->stream_enc/grouped_pipes\[0\]->stream_res\.stream_enc/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/grouped_pipes\[1\]->stream_enc/grouped_pipes\[1\]->stream_res\.stream_enc/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_ctx\[i\]->stream_enc/pipe_ctx\[i\]->stream_res\.stream_enc/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_ctx_old->stream_enc/pipe_ctx_old->stream_res\.stream_enc/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_set\[j\]->stream_enc/pipe_set\[j\]->stream_res\.stream_enc/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_ctx\[i\]\.stream_enc/pipe_ctx\[i\]\.stream_res\.stream_enc/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipes\[i\]\.stream_enc/pipes\[i\]\.stream_res\.stream_enc/g'

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move TG to stream_res

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/pipes->tg/pipes->stream_res\.tg/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/ctx->tg->/ctx->stream_res\.tg->/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/pipe->tg/pipe->stream_res\.tg/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/pipe_ctx->tg/pipe_ctx->stream_res\.tg/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_ctx\[pipe_offset\]\.tg/pipe_ctx\[pipe_offset\]\.stream_res\.tg/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i
's/grouped_pipes\[i\]->tg/grouped_pipes\[i\]->stream_^Cs\.tg/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i
's/grouped_pipes\[0\]->tg/grouped_pipes\[0\]->stream_res\.tg/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i
's/grouped_pipes\[1\]->tg/grouped_pipes\[1\]->stream_res\.tg/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/pipe_ctx\[i\]->tg/pipe_ctx\[i\]->stream_res\.tg/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/pipe_ctx_old->tg/pipe_ctx_old->stream_res\.tg/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/pipe_set\[j\]->tg/pipe_set\[j\]->stream_res\.tg/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/pipe_ctx\[i\]\.tg/pipe_ctx\[i\]\.stream_res\.tg/g'

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move OPP to stream_res

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/pipes->opp/pipes->stream_res\.opp/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/ctx->opp->/ctx->stream_res\.opp->/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/pipe->opp/pipe->stream_res\.opp/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/pipe_ctx->opp/pipe_ctx->stream_res\.opp/g'

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move mi, ipp, xfm to plane_res

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/\.mi/\.plane_res.mi/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/->mi/->plane_res.mi/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/\.ipp/\.plane_res.ipp/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/->ipp/->plane_res.ipp/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/\.xfm/\.plane_res.xfm/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/->xfm/->plane_res.xfm/g'

To clean up bad renames:

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/\.plane_res\.min/\.min/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/->plane_res\.min/->min/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/->plane_res\.mic/->mic/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/\.plane_res\.mis/\.mis/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/->plane_res\.mid/->mid/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/\.plane_res\.mid/\.mid/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/->plane_res\.mis/->mis/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/\.plane_res\.min/\.min/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/->plane_res\.min/->min/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/->plane_res\.mic/->mic/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/\.plane_res\.mis/\.mis/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/->plane_res\.mid/->mid/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/\.plane_res\.mid/\.mid/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/->plane_res\.mis/->mis/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/\.plane_res\.ipps/\.ipps/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/mpcc_cfg\.plane_res\.mi/mpcc_cfg\.mi/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/mi->plane_res\./mi->/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/cfg->plane_res\./cfg->/g'

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move scl_data to plane_res

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/\.scl_data/\.plane_res.scl_data/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/->scl_data/->plane_res.scl_data/g'

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Stub new resource objects

We want to split pipe_ctx into plane and stream resource objects.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Rename more dc_surface stuff to plane_state

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Rename dc_stream to dc_stream_state

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/struct dc_stream/struct dc_stream_state/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/struct dc_stream_state_update/struct dc_stream_update/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/struct dc_stream_state_status/struct dc_stream_status/g'

Plus some manual changes

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Rename dc_surface to dc_plane_state

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/struct dc_surface/struct dc_plane_state/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/struct dc_plane_state_update/struct dc_surface_update/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/struct dc_plane_state_status/struct dc_surface_status/g'

find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/struct dc_plane_state_dcc_cap/struct dc_surface_dcc_cap/g'

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove DCN1 guard as DCN1 is already open sourced.

Signed-off-by: Kenny Tsao <kenny.tsao@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add per surface validation hook.

For now just validate pixel format in the hook.

Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: mpc block redesign

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Roll core_stream into dc_stream

Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Roll core_gamma into dc_gamma

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Roll gamma struct into core_gamma

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Roll core_sink into dc_sink

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Roll sink struct into core_sink

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Roll core_link into dc_link

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Roll core_surface into dc_surface

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add idle wait for passive surface update and modeset

Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Roll surface struct into core_surface

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix aviInfoFrame bar Info and add set_avMute

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Introduce refcount for dc_validate_context

Linux requires to be able to release allocated context
in case it was never commited.

Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Flattening to dc_transfer_func

Flattening dc transfer functions in the following manner:
transfer_func > core_transfer_func > dc_transfer_func

References to deleted structs are updated as needed.

Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: redesign mpc

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: make dc_get_validate_context re-entrant

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: refactor bw related variable structure in val_ctx

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: ifdef some code only needed for DCN

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: i2c/aux Remove link index.

Link index is an unnecessery level of inderection when
calling from kernel i2c/aux transfer into DAL.

Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: Enable DCN in DC

Enable DCN in DC.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add function to set dither option

Signed-off-by: Ding Wang <Ding.Wang@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: decouple resource_pool from resource_context

to avoid null access in case res_ctx is used to access res_pool before it's fully constructed

also make it clear which function has dependency on resource_pool

Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: PSR Refactor

- Refacotr PSR to follow correct module pattern
- fix eDP only working on sink index 0.

Signed-off-by: Sylvia Tsai <sylvia.tsai@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Rename bandwidth_calcs.h to dce_calcs.h

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove dc_pre_update_surfaces_to_stream from dc use

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactor on dc_sink structure.

Signed-off-by: Zeyu Fan <Zeyu.Fan@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move refclk from dc to resource_pool

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove apply_clk_constraints, used validate_bandwidth universally

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add dcfclk reporting to pplib

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: DMCU Compile and Load

Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Don't reserve pipe for underlay on ASIC without underlay

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Jordan Lazare <Jordan.Lazare@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove dc_target object

dc_target does not fit well into DRM framework so removed it.
This will prevent the driver from leveraging the pipe-split
code for tiled displays, so will have to be handled at a higher
level. Most places that used dc_target now directly use dc_stream
instead.

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactor output transfer function to stream

Refactor part 3 - Moving output transfer function from surface to stream

Split HWSS to program degamma and regamma separately.
Degamma should be dependent on input transfer function.
And Regamma should depend on the desired output transfer function.

Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add in/out transfer functions to DC

Refactor part 1 of degamma/regamma programming.

End goal is to have source and output transfer function in
which dc can use to decide how to program the degamma
and regamma HW.

Gamma will be explicitly applied through
dc_update_surfaces_for_target.

Color module should build the logical curve with all
adjustments applied and pass enough information
for dc to program HW PWL.

Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix up construction of scratch_val_ctx

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: moving remaining functionality from gpu to dce_clocks

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/dc: Add dc display driver (v2)

Supported DCE versions: 8.0, 10.0, 11.0, 11.2

v2: rebase against 4.11

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>