drm/amd/display: Add VCO speed parameter for DCN31 FPU

Add VCO speed parameters in the bounding box array.

Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean FPGA code in dc

[Why]
Drop dead code for Linux.

[How]
Remove all IS_FPGA_MAXIMUS_DC and IS_DIAG_DC

Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add pixel rate based CRB allocation support

This feature is meant to unblock PSTATE for certain high end display
configs on dcn315. This is achieved by allocating CRB to detile buffer
based on display requirements to meet pstate latency hiding needs.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: set dcn315 lb bpp to 48

[Why & How]
Fix a typo for dcn315 line buffer bpp.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: set dcn315 lb bpp to 48

[Why & How]
Fix a typo for dcn315 line buffer bpp.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/display: set per pipe dppclk to 0 when dpp is off

The 'commit 52e4fdf09ebc ("drm/amd/display: use low clocks for no plane
configs")' introduced a change that set low clock values for DCN31 and
DCN32. As a result of these changes, DC started to spam the log with the
following warning:

------------[ cut here ]------------
WARNING: CPU: 8 PID: 1486 at
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_dccg.c:58
dccg2_update_dpp_dto+0x3f/0xf0 [amdgpu]
[..]
CPU: 8 PID: 1486 Comm: kms_atomic Tainted: G W 5.18.0+ #1
RIP: 0010:dccg2_update_dpp_dto+0x3f/0xf0 [amdgpu]
RSP: 0018:ffffbbd8025334d0 EFLAGS: 00010206
RAX: 00000000000001ee RBX: ffffa02c87dd3de0 RCX: 00000000000a7f80
RDX: 000000000007dec3 RSI: 0000000000000000 RDI: ffffa02c87dd3de0
RBP: ffffbbd8025334e8 R08: 0000000000000001 R09: 0000000000000005
R10: 00000000000331a0 R11: ffffffffc0b03d80 R12: ffffa02ca576d000
R13: ffffa02cd02c0000 R14: 00000000001453bc R15: ffffa02cdc280000
[..]
dcn20_update_clocks_update_dpp_dto+0x4e/0xa0 [amdgpu]
dcn32_update_clocks+0x5d9/0x650 [amdgpu]
dcn20_prepare_bandwidth+0x49/0x100 [amdgpu]
dcn30_prepare_bandwidth+0x63/0x80 [amdgpu]
dc_commit_state_no_check+0x39d/0x13e0 [amdgpu]
dc_commit_streams+0x1f9/0x3b0 [amdgpu]
dc_commit_state+0x37/0x120 [amdgpu]
amdgpu_dm_atomic_commit_tail+0x5e5/0x2520 [amdgpu]
? _raw_spin_unlock_irqrestore+0x1f/0x40
? down_trylock+0x2c/0x40
? vprintk_emit+0x186/0x2c0
? vprintk_default+0x1d/0x20
? vprintk+0x4e/0x60

We can easily trigger this issue by using a 4k@120 or a 2k@165 and
running some of the kms_atomic tests. This warning is triggered because
the per-pipe clock update is not happening; this commit fixes this issue
by ensuring that DPPCLK is updated when calculating the watermark and
dlg is invoked.

Fixes: 2641c7b78081 ("drm/amd/display: use low clocks for no plane configs")
Reported-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix unbounded requesting for high pixel rate modes on dcn315

Unbounded requesting is getting configured for odm mode calculations which
is incorrect. This change checks whether mode requires odm ahead of time.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: use low clocks for no plane configs

Stream only configurations do not require DCFCLK, SOCCLK, DPPCLK
or FCLK. They also always allow pstate change.

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: always allow pstate change when no dpps are active on dcn315

Prevents certain configs blocking s0i3 when streams aren't completely
removed

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add dummy pstate workaround to dcn315

DCN315 has to always allow pstate change or SMU will hang. This
workaround achieves this by applying a low pstate change latency
to be used when pstate is calculated to be unsupported. This lower
latency only accounts for memory retraining; a previous change
handles locking in the highest available pstate allowing us to minimize
required latency hiding to only account for memory retraining.

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix dcn315 dml detile overestimation

DML does not take the fact that dcn315 does not have enough detile
buffer to max all pipes. This change adds a workaround to apply
the same logic DC does when calculating detile buffer size in DML.

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix dcn315 memory channel count and width read

[Why & How]
Correctly set ddr5 channel width to 8 bytes

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add debug option for dramclk_change_latency in apu

[Why & How]
Support dramclk change latency change via debug option and add some
code isolation.

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: include soc._clock_tmp[] into DC's scratch region

Currently, we are using soc._clock_tmp[] to temporarily store and modify
data from soc.clock_limits[] before copying it back into
soc.clock_limits[] (because modifying data directly in
soc.clock_limits[] causes unintended behavior). However, this approach
has a number of downsides, such as:

1. struct _vcs_dpi_soc_bounding_box_st's creation/destruction
aren't well defined (which could mean more unintended
behavior).
2. Throwing "temp" varibles in structs everywhere doesn't make
for a particularly readable codebase.

For these reasons, we should get rid of soc._clock_tmp[] by defining a
struct scratch within struct dc that, contains within it all of the
temporary variables (including _clock_tmp[]) such that it is obvious how
they are intended to be used.

Co-authored-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix dcn315 memory channel count and width read

[Why & How]
Correctly set ddr5 channel width to 8 bytes

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: include missing headers

Add missing headers to solve the following warnings from sparse:

drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:656:17: warning: symbol 'ddr4_wm_table_gs' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:693:17: warning: symbol 'lpddr4_wm_table_gs' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:730:17: warning: symbol 'lpddr4_wm_table_with_disabled_ppt' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:767:17: warning: symbol 'ddr4_wm_table_rn' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:804:17: warning: symbol 'ddr4_1R_wm_table_rn' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:841:17: warning: symbol 'lpddr4_wm_table_rn' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn301/dcn301_fpu.c:217:17: warning: symbol 'ddr4_wm_table' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn301/dcn301_fpu.c:254:17: warning: symbol 'lpddr5_wm_table' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/dcn31_fpu.c:53:30: warning: symbol 'dcn3_1_ip' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/dcn31_fpu.c:197:30: warning: symbol 'dcn3_15_ip' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/dcn31_fpu.c:293:30: warning: symbol 'dcn3_16_ip' was not declared. Should it be static?

Fixes: 1a3408259bfd ("drm/amd/display: move FPU code on dcn21 clk_mgr")
Fixes: 5085e0361f5a ("drm/amd/display: move FPU code from dcn301 clk mgr to DML folder")
Fixes: 26f4712aedbd ("drm/amd/display: move FPU related code from dcn31 to dml/dcn31 folder")
Fixes: fa896297b31b ("drm/amd/display: move FPU related code from dcn315 to dml/dcn31 folder")
Fixes: 3f8951cc123f ("drm/amd/display: move FPU related code from dcn316 to dml/dcn31 folder")
Signed-off-by: Magali Lemes <magalilemes00@gmail.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: make variables static

As "dcn3_1_soc", "dcn3_15_soc", and "dcn3_16_soc" are not used outside
of their corresponding "dcn3*_fpu.c", make them static and remove their
extern declaration.

Fixes: 26f4712aedbd ("drm/amd/display: move FPU related code from dcn31 to dml/dcn31 folder")
Fixes: fa896297b31b ("drm/amd/display: move FPU related code from dcn315 to dml/dcn31 folder")
Fixes: 3f8951cc123f ("drm/amd/display: move FPU related code from dcn316 to dml/dcn31 folder")
Signed-off-by: Magali Lemes <magalilemes00@gmail.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix soft-fp vs hard-fp on DCN 3.1 family for powerpc

Move remaining FPU code to DML folder that caused compilation error for
powerpc. This patch depends on [1] to prevent the error below:

/gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_resource.o uses soft float
/gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: failed to merge target specific data of file drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_resource.o
/gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/amdgpu/../display/dc/dcn315/dcn315_resource.o uses soft float
/gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: failed to merge target specific data of file drivers/gpu/drm/amd/amdgpu/../display/dc/dcn315/dcn315_resource.o
/gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/amdgpu/../display/dc/dcn316/dcn316_resource.o uses soft float
/gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: failed to merge target specific data of file drivers/gpu/drm/amd/amdgpu/../display/dc/dcn316/dcn316_resource.o

[1] https://lore.kernel.org/amd-gfx/20220716195144.342960-1-mwen@igalia.com/

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move dcn31_update_soc_for_wm_a func to dml fpu folder

Although dcn31_update_soc_for_wm_a() is only called in dml/dcn31/dcn31_fpu by
dc->res_pool->funcs->update_soc_for_wm_a(dc, context), it's declared in
dcn31_resource that is not FPU protected. Move this function to dcn31_fpu
file as part of the work to isolate FPU code.

Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use pre-allocated temp struct for bounding box update

[Why]

There is a theoretical problem in prior patches for reducing the stack
size of *update_bw_bounding_box() functions.

By modifying the soc.clock_limits[n] struct directly, this can cause
unintended behavior as the for loop attempts to swap rows in
clock_limits[n]. A temporary struct is still required to make sure we
stay functinoally equivalent.

[How]

Add a temporary clock_limits table to the SOC struct, and use it when
swapping rows.

Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reduce frame size in the bouding box for DCN31/316

GCC throw warnings for the function dcn31_update_bw_bounding_box and
dcn316_update_bw_bounding_box due to its frame size that looks like
this:

error: the frame size of 1936 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

For fixing this issue I dropped an intermadiate variable.

Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Correct min comp buffer size

[Why]
In 3-way mpo pipes, there is a case that we
overbook the CRB buffer size. At rare instances,
overbooking the crb will cause underflow. This only
happens when det_size changes dynamically
based on pipe_cnt.

[How]
Set min compbuff size to 1 segment when preparing BW.

Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: update dcn315 clk table read

Clean up the sequence by making sure clk_mgr always builds a
reasonable clock table regardless of what we read from smu
by moving all defaults from resource soc struct to clk_mgr.

Now the only thing resource soc update does is read
the clock table and apply any DC specific policy decisions
to how clocks are populated in dml soc.

Reviewed-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move FPU related code from dcn316 to dml/dcn31 folder

Moves FPU-related structs and dcn316_update_bw_bounding_box from dcn316
driver to dml/dcn31 that centralize FPU operations for DCN 3.1x

Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move FPU related code from dcn315 to dml/dcn31 folder

Moves related structs and dcn315_update_bw_bounding_box from dcn315
driver code to dml/dcn31_fpu that centralizes FPU code for DCN 3.1x.

Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move FPU related code from dcn31 to dml/dcn31 folder

Creates FPU files in dml/dcn31 folder to centralize FPU operations
from 3.1x drivers and moves all FPU-associated code from dcn31 driver
to there. It includes the struct _vcs_dpi_ip_params_st and
_vcs_dpi_soc_bounding_box_st and functions:

- dcn31_calculate_wm_and_dlg_fp()
- dcn31_update_bw_bounding_box()

adding dc_assert_fp_enabled to them and drop DC_FP_START/END inside
functions that was moved to dml folder, as required.

Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>