drm/amd/display: Fix DP2.0 timing sync

[Why]
Triggering OTG sync before all OTG/HPO clock programming is complete
causes timing sync to fail and a subsequent P-state hang.

[How]
Move DTB clock programming earlier in the sequence to
enable_stream_timing.

Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use DTBCLK as refclk instead of DPREFCLK

[Why]
Flash of corruption observed when UCLK switching after transitioning
from DTBCLK to DPREFCLK on subVP(DP) + subVP(HDMI) config
Scenario where DPREFCLK is required instead of DTBCLK is not expected

[How]
Always set the DTBCLK source as DTBCLK0

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Don't apply FIFO resync W/A if rdivider = 0

[Description]
It is not valid to set the WDIVIDER value to 0, so do not
re-write to DISPCLK_WDIVIDER if the current value is 0
(i.e., it is at it's initial value and we have not made any
requests to change DISPCLK yet).

Reviewed-by: Saaem Rizvi <syedsaaem.rizvi@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Don't apply FIFO resync W/A if rdivider = 0

[Description]
It is not valid to set the WDIVIDER value to 0, so do not
re-write to DISPCLK_WDIVIDER if the current value is 0
(i.e., it is at it's initial value and we have not made any
requests to change DISPCLK yet).

Reviewed-by: Saaem Rizvi <syedsaaem.rizvi@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Trigger DIO FIFO resync on commit streams for DCN32

[WHY and HOW]
Currently, on DCN32 we have an old workaround to resolve a DIO FIFO
speed issue when writing to the OTG DIVIDER register. However, this
workaround is not safe as we should be applying the DIO FIFO rampup
logic when the OTG re disabled along with the encoders. This new
workaround accounts for this. If the workaround sequence is incorrect,
like it is was, there is a chance we might hang. this new
workaround was first implemented in DCN314.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Saaem Rizvi <syedsaaem.rizvi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix wrong index used in dccg32_set_dpstreamclk

[Why & How]
When merging commit 9af611f29034
("drm/amd/display: Fix DCN32 DPSTREAMCLK_CNTL programming"),
index change was not picked up.

Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Fixes: 9af611f29034 ("drm/amd/display: Fix DCN32 DPSTREAMCLK_CNTL programming")
Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Implement workaround for writing to OTG_PIXEL_RATE_DIV register

[Why and How]
Current implementation requires FPGA builds to take a different
code path from DCN32 to write to OTG_PIXEL_RATE_DIV. Now that
we have a workaround to write to OTG_PIXEL_RATE_DIV register without
blanking display on hotplug on DCN32, we can allow the code paths for
FPGA to be exactly the same allowing for more consistent
testing.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix wrong index used in dccg32_set_dpstreamclk

[Why & How]
When merging commit 9af611f29034
("drm/amd/display: Fix DCN32 DPSTREAMCLK_CNTL programming"),
index change was not picked up.

Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Fixes: 9af611f29034 ("drm/amd/display: Fix DCN32 DPSTREAMCLK_CNTL programming")
Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix DTBCLK disable requests and SRC_SEL programming

[Description]
- When transitioning FRL / DP2 is not required, we will always request
DTBCLK = 0Mhz, but PMFW returns the min freq
- This causes us to make DTBCLK requests every time we call optimize
after transitioning from FRL to non-FRL
- If DTBCLK is not required, request the min instead (then we only need
to make 1 extra request at boot time)
- Also when programming PIPE_DTO_SRC_SEL, don't programming for DP
first, just programming once for the required selection (programming
DP on an HDMI connection then switching back causes corruption)

Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Avoid setting pixel rate divider to N/A

[Why]
Pixel rate divider values should never be set to N/A (0xF) as the K1/K2
field is only 1/2 bits wide.

[How]
Set valid divider values for virtual and FRL/DP2 cases.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Avoid setting pixel rate divider to N/A

[Why]
Pixel rate divider values should never be set to N/A (0xF) as the K1/K2
field is only 1/2 bits wide.

[How]
Set valid divider values for virtual and FRL/DP2 cases.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Avoid unnecessary pixel rate divider programming

[Why]
Programming pixel rate divider when FIFO is enabled can cause FIFO error.

[How]
Skip divider programming when divider values are the same to prevent FIFO
error.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: make some functions static

These functions are not used outside the file dcn32_dccg.c, so the
modification is defined as static.

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dccg.c:257:6: warning: no previous prototype for ‘dccg32_otg_drop_pixel’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dccg.c:248:6: warning: no previous prototype for ‘dccg32_otg_add_pixel’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dccg.c:211:6: warning: no previous prototype for ‘dccg32_set_dpstreamclk’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dccg.c:136:6: warning: no previous prototype for ‘dccg32_set_dtbclk_dto’.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2142
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix DCN32 DPSTREAMCLK_CNTL programming

[Why]
Each index in the DPSTREAMCLK_CNTL register
phyiscally maps 1-to-1 with HPO stream encoder
instance. On the other hand, each index in
DTBCLK_P_CNTL physically maps 1-to-1 with OTG
instance.

Current DCN32 DPSTREAMCLK_CLK programing assumes
that OTG instance always maps 1-to-1 with
HPO stream encoder instance. This is not always
guaranteed and can result in blackscreen.

[How]
Program the correct dpstreamclk instance with
the correct dtbclk_p source.

Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Avoid unnecessary pixel rate divider programming

[Why]
Programming pixel rate divider when FIFO is enabled can cause FIFO error.

[How]
Skip divider programming when divider values are the same to prevent FIFO
error.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix DCN32 DPSTREAMCLK_CNTL programming

[Why]
Each index in the DPSTREAMCLK_CNTL register
phyiscally maps 1-to-1 with HPO stream encoder
instance. On the other hand, each index in
DTBCLK_P_CNTL physically maps 1-to-1 with OTG
instance.

Current DCN32 DPSTREAMCLK_CLK programing assumes
that OTG instance always maps 1-to-1 with
HPO stream encoder instance. This is not always
guaranteed and can result in blackscreen.

[How]
Program the correct dpstreamclk instance with
the correct dtbclk_p source.

Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix dpstreamclk programming

[WHY]
Currently programming incorrect hpo inst as well as selecting incorrect source

[HOW]
Use hpo inst instead of otg inst to select dpstreamclk inst

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Switch to correct DTO on HDMI

[Why]
For Pixel Rate control, when on HDMI, HDMI DTO should be selected
instead of DP DTO.

[How]
Pass HDMI parameter for HDMI stream, and select correct DTO.

Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: make some functions static

Fixes "no previous prototype" warnings.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Implement DTBCLK ref switching on dcn32

[WHY & HOW]
Implements DTB ref clock switching with reg key default to OFF.
Refactors dccg DTBCLK logic to not store redundant state information
dccg. Also removes duplicated functions that should be inherited from
other dcn versions.

Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add new pixel rate programming

[why]
New dividers in DCCG need to be programmed depending
on encoder/stream type since pixels per clock in
OTG/DIO is different

DIO also needs additional programming depending on
pixels per clock

Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>

drm/amd/display: Use DTBCLK for valid pixel clock

Use DTBCLK for valid pixel clock generation

Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Acked-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add dependant changes for DCN32/321

[Why&How]
This patch adds necessary changes needed in DC files outside DCN32/321
specific tree

v2: squash in updates (Alex)

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add DCN32/321 specific files for Display Core

Add core DC support for DCN 3.2.x.

v2: squash in fixup (Alex)

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>