#
7ae1dbe6 |
|
06-Feb-2023 |
Wenjing Liu <wenjing.liu@amd.com> |
drm/amd/display: merge dc_link.h into dc.h and dc_types.h [why] Remove the need to include dc_link.h separately. dc.h should contain everything needed on DM side. [How] Merge dc_link.h into dc.h and dc_types.h so DM only needs to include dc.h to use all link public functions. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
6651875a |
|
03-May-2022 |
David Zhang <dingchen.zhang@amd.com> |
drm/amd/display: Add PSR-SU-RC support in DC [Why] PSR-SU Rate Control - or PSR-SU-RC - enables PSR-SU panels to work with variable refresh rate to allow for more power savings. Lowering the refresh rate can increase PSR residency by expanding the eDP main link shut down duration. It can also lower panel power consumption. There is a complication with PSR, since the eDP main link can be shut down. Therefore, the timing controller (TCON) on the eDP sink nees to be able to scan out its remote buffer independent of the main link. To allow the eDP source to specify the sink's refresh rate while the link is off, vendor-specific DPCD registers are used. This allows the eDP source to then "Rate Control" the panel during PSR active. [How] Add DC support to communicate with PSR-SU-RC supported eDP sinks. The sink will need to know the desired VTotal during PSR active. This change only adds support to DC, support in amdgpu_dm is still pending to enable this fully. Signed-off-by: David Zhang <dingchen.zhang@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
f0d0c391 |
|
04-Nov-2021 |
Mikita Lipski <mikita.lipski@amd.com> |
drm/amd/display: Pass panel inst to a PSR command [why] PSR set power command wasn't setting panel instance and command version which caused both streams to overwrite the same PSR state. [how] Pass panel instance to the set power command function and to DMUB and set command version enum Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
e5dfcd27 |
|
22-Sep-2021 |
Robin Chen <po-tchen@amd.com> |
drm/amd/display: dc_link_set_psr_allow_active refactoring [Why] To expose new power optimization flags to PSR interface. It allows the PSR related power features can be enabled separately base on different use scenarios. Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Robin Chen <po-tchen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
74b4afad |
|
19-May-2021 |
Mikita Lipski <mikita.lipski@amd.com> |
drm/amd/display: Enable PSR Residency for multiple panels [why] Allow specifying which panel to take PSR Residency measurements from. [how] Pass panel instance to DMUB through GPINT in the upper 8 bits of the parameter. Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
f56c837a |
|
17-May-2021 |
Mikita Lipski <mikita.lipski@amd.com> |
drm/amd/display: Enabling PSR support for multiple panels [why] Updating PSR interfaces to allow PSR enablement per eDP panel. [how] - Copying PSR command structures to DC - Changing function interfaces to pass panel instance - Communicating with DMUB per link instead of assuming to use a single one -Iterating through all PSR capable panels when enabling/disabling all Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
b8e0b3d6 |
|
21-Oct-2020 |
Wyatt Wood <wyatt.wood@amd.com> |
drm/amd/display: Hook up PSR residency command to DSAT [Why] Use GPINT command to get PSR residency from FW. [How] Hook up PSR residency command to DSAT. Since PSR Count Request is deprecated, we will use this. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
1d496907 |
|
20-Oct-2020 |
Krunoslav Kovac <Krunoslav.Kovac@amd.com> |
drm/amd/display: Engage PSR synchronously [Why & How] The intended use is to force PSR into active state and ignore all events until explicit EXIT. A new event force_static is added to power module. It is then sent to FW. Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
a9edc815 |
|
10-Sep-2020 |
Wyatt Wood <wyatt.wood@amd.com> |
drm/amd/display: Implement PSR wait for enable/disable [Why] For DMUB implementation of PSR, the 'wait' parameter, used to determine if driver should wait for PSR enable/disable, is not implemented correctly. [How] Implement wait for PSR enable/disable. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
9dac88d8 |
|
12-Feb-2020 |
Wyatt Wood <wyatt.wood@amd.com> |
drm/amd/display: Add driver support for enabling PSR on DMCUB [Why] We want to be able to enable PSR on DMCUB, and fallback to DMCU when necessary. [How] Add infrastructure to enable and disable PSR on DMCUB. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
115c7e7f |
|
20-Jan-2020 |
Wyatt Wood <wyatt.wood@amd.com> |
drm/amd/display: Add psr get_state call [Why] Driver needs to know PSR state. [How] Use GPINT to call to firmware and get psr state. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
8eb85cb5 |
|
16-Jan-2020 |
Wyatt Wood <wyatt.wood@amd.com> |
drm/amd/display: Hookup psr set version call [Why] Set version is currently not called. [How] Add call to set version from copy settings. This should be the only time this is called as the eDP caps should never change. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
d4b8573e |
|
09-Jan-2020 |
Wyatt Wood <wyatt.wood@amd.com> |
drm/amd/display: Add set psr version message [Why] Must know psr version during runtime. [How] Add set psr version message structures. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
4c1a1335 |
|
11-Dec-2019 |
Wyatt Wood <wyatt.wood@amd.com> |
drm/amd/display: Driverside changes to support PSR in DMCUB [Why] Moving PSR from DMCU to DMCUB. [How] Add driverside PSR changes required to send inbox messages to fw. These changes are non-functional until the psr structure allocation is uncommented. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|