#
e53524cd |
|
22-Sep-2023 |
Mounika Adhuri <moadhuri@amd.com> |
drm/amd/display: Refactor HWSS into component folder [why] Rename hw_sequencer to hwseq. Move all hwseq files to unique folder hwss. [how] creating hwss repo in dc, and moved the dcnxx_hwseq.c and .h files into corresponding new folders inside the hwss and cleared the linkage errors by adding relative paths in the Makefile.template. Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Mounika Adhuri <moadhuri@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
c7ddc0a8 |
|
12-May-2023 |
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> |
drm/amd/display: Add Functions to enable Freesync Panel Replay Add various functions for replay, such as construct, destroy, enable get_state, and copy_setting etc. These functions communicate with the firmware to setup and enable panel replay Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
b8fe5637 |
|
08-Nov-2022 |
Leon Huang <Leon.Huang1@amd.com> |
drm/amd/display: Refactor ABM feature [Why] Refactor ABM feature and implement inbox command for DMUB. [How] Implement the ioctl to send inbox command to DMUB. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Leon Huang <Leon.Huang1@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
4f8e37db |
|
21-Jan-2021 |
Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> |
drm/amd/display: Support for DMUB AUX [WHY] To process AUX transactions with DMUB using inbox1 and outbox1 mail boxes. [HOW] 1) Added inbox1 command DMUB_CMD__DP_AUX_ACCESS to issue AUX commands to DMUB in dc_process_dmub_aux_transfer_async(). DMUB processes AUX cmd with DCN and sends reply back in an outbox1 message triggering an outbox1 interrupt to driver. 2) In existing driver implementation, AUX commands are processed synchronously by configuring DCN reg. But in DMUB AUX, driver sends an inbox1 message and waits for a conditional variable (CV) which will be signaled by outbox1 ISR. 3) As the driver holds dal and dc locks while waiting for CV, the outbox1 ISR is registered with noMutexWait set to true, which allows ISR to run and signal CV. This sets a constraint on ISR to not modify variables such as dc, dmub, etc. 4) Created dmub_outbox.c with dmub_enable_outbox_notification() to enable outbox1 mailbox. 5) New mailbox address ranges allocated for outbox1 of size DMUB_RB_SIZE. Created dmub functions for Outbox1: dmub_dcn20_setup_out_mailbox(), dmub_dcn20_get_outbox1_wptr() and dmub_dcn20_set_outbox1_rptr(). 6) Added functions dc_stat_get_dmub_notification() and dmub_srv_stat_get_notification() to retrieve Outbox1 message. 7) Currently, DMUB doesn't opens DDC in AUX mode before issuing AUX transaction. A workaround is added in dce_aux_transfer_dmub_raw() to open in DDC in AUX mode for every AUX transaction. 8) Added dc debug option enable_dmub_aux_for_legacy_ddc enable/disable DMUB AUX. This debug option is checked dce_aux_transfer_with_retries() to select the method to process AUX transactions. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
dc6e2448 |
|
27-May-2020 |
Wyatt Wood <wyatt.wood@amd.com> |
drm/amd/display: Use dmub fw to lock pipe, cursor, dig [Why] Hw lock manager adds the ability to lock pipe, cursor, and dig in fw. [How] Send hw lock command to fw to lock pipe, cursor, and dig. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
d4caa72e |
|
08-Apr-2020 |
Anthony Koo <Anthony.Koo@amd.com> |
drm/amd/display: change from panel to panel cntl [Why] it doesn't represent panel specifically, it's more like the control logic for the panel [How] change from panel to panel cntl to make it a bit more clear Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
904fb6e0 |
|
27-Mar-2020 |
Anthony Koo <Anthony.Koo@amd.com> |
drm/amd/display: move panel power seq to new panel struct [Why] panel power sequencer is currently just sitting in hwseq but it really it tied to internal panels [How] make a new panel struct to contain power sequencer code Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
16012806 |
|
20-Feb-2020 |
Wyatt Wood <wyatt.wood@amd.com> |
drm/amd/display: Add ABM driver implementation [Why] Moving ABM from DMCU to DMCUB. [How] Add ABM driver files and implementation. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
9dac88d8 |
|
12-Feb-2020 |
Wyatt Wood <wyatt.wood@amd.com> |
drm/amd/display: Add driver support for enabling PSR on DMCUB [Why] We want to be able to enable PSR on DMCUB, and fallback to DMCU when necessary. [How] Add infrastructure to enable and disable PSR on DMCUB. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
9b93eb47 |
|
06-May-2019 |
Eric Yang <Eric.Yang2@amd.com> |
drm/amd/display: move clk_mgr files to right place [Why] Better organization [How] Move clk_mgr files under dc/clk_mgr Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
dc88b4a6 |
|
22-Apr-2019 |
Eric Yang <Eric.Yang2@amd.com> |
drm/amd/display: make clk mgr soc specific [Why] First step of refactoring clk mgr to better handle different ways of handling clock operations. Clock operation policies are soc specific and not just DCN vesion specific. It is not a hw resource, should not be in the resource pool. [How] Change clock manager creation to be based on HW internal ID, rename clock manager members to be more clear. Move clock manager out of resource. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
84e7fc05 |
|
28-Sep-2018 |
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> |
drm/amd/display: rename dccg to clk_mgr In preparation for adding the actual dccg block since the current implementation of dccg is mor eof a clock manager than a hw block Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
4c5e8b54 |
|
24-Sep-2018 |
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> |
drm/amd/display: split dccg clock manager into asic folders Currently dccg contains code related to every dcn revision in a single file. This change splits out the dcn parts of code into correct folders Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
c85e6e54 |
|
23-Jul-2018 |
David Francis <David.Francis@amd.com> |
drm/amd/display: Create new i2c resource [Why] I2C code did not match dc resource model and was generally unpleasant [How] Move code into new svelte dce_i2c files, replacing various i2c objects with two structs: dce_i2c_sw and dce_i2c_hw. Fully split sw and hw code paths. Remove all redundant declarations. Use address lists to distinguish between versions. Change dce80 code to newer register access macros. Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
5c6ac711 |
|
10-Jul-2018 |
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> |
drm/amd/display: Decouple aux from i2c [Why] Aux engine is created from i2caux layer. We want to remove this layer and use the engine directly. [How] Decouple aux engine from i2caux. Move aux engine related code to dce folder and use dc resource pool to manage the engine. And use the engine functions directly Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
1a09120f |
|
30-Nov-2017 |
Alex Deucher <alexander.deucher@amd.com> |
drm/amdgpu: add license to Makefiles Was missing license text. Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
e2874a3c |
|
30-Nov-2017 |
Alex Deucher <alexander.deucher@amd.com> |
drm/amdgpu: add license to Makefiles Was missing license text. Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
86b6a203 |
|
24-Apr-2017 |
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> |
drm/amd/display: dce120 to dce ipp refactor Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
5e7773a2 |
|
23-Jan-2017 |
Anthony Koo <Anthony.Koo@amd.com> |
drm/amd/display: DMCU Compile and Load Signed-off-by: Anthony Koo <anthony.koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
ab3ee7a5 |
|
14-Dec-2016 |
Zeyu Fan <Zeyu.Fan@amd.com> |
drm/amd/display: OPP refactor and consolidation for DCE. Signed-off-by: Zeyu Fan <Zeyu.Fan@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
9a70eba7 |
|
01-Dec-2016 |
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> |
drm/amd/display: consolidate dce8-11.2 display clock code Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
4562236b |
|
12-Sep-2017 |
Harry Wentland <harry.wentland@amd.com> |
drm/amd/dc: Add dc display driver (v2) Supported DCE versions: 8.0, 10.0, 11.0, 11.2 v2: rebase against 4.11 Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|