drm/amdkfd: Skip packet submission on fatal error

If fatal error is detected, packet submission won't go through. Return
error in such cases. Also, avoid waiting for fence when fatal error is
detected.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Introduce kfd_node struct (v5)

Introduce a new structure, kfd_node, which will now represent
a compute node. kfd_node is carved out of kfd_dev structure.
kfd_dev struct now will become the parent of kfd_node, and will
store common resources such as doorbells, GTT sub-alloctor etc.
kfd_node struct will store all resources specific to a compute
node, such as device queue manager, interrupt handling etc.

This is the first step in adding compute partition support in KFD.

v2: introduce kfd_node struct to gc v11 (Hawking)
v3: make reference to kfd_dev struct through kfd_node (Morris)
v4: use kfd_node instead for kfd isr/mqd functions (Morris)
v5: rebase (Alex)

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Morris Zhang <Shiwu.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: update SPDX license header

Update the SPDX License header for all the KFD files.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: add kfd_device_info_init function

Initializes kfd->device_info given either asic_type (enum) if GFX
version is less than GFX9, or GC IP version if greater. Also takes in vf
and the target compiler gfx version. Uses SDMA version to determine
num_sdma_queues_per_engine.

Convert device_info to a non-pointer member of kfd, change references
accordingly.

Change unsupported asic condition to only probe f2g, move device_info
initialization post-switch.

Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: replace asic_family with asic_type

asic_family was a duplicate of asic_type, both of type amd_asic_type.
Replace all instances of device_info->asic_family with adev->asic_type
and remove asic_family from device_info.

Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Remove cu mask from struct queue_properties(v2)

Actually, cu_mask has been copied to mqd memory and
does't have to persist in queue_properties. Remove it
from queue_properties.

And use struct mqd_update_info to store such properties,
then pass it to update queue operation.

v2:
* Rename pqm_update_queue to pqm_update_queue_properties.
* Rename struct queue_update_info to struct mqd_update_info.
* Rename pqm_set_cu_mask to pqm_update_mqd.

Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Enable over-subscription with >1 GWS queue

The current GWS usage model will only allows a single GWS-enabled
process to be active on the GPU at once. This ensures that a
barrier-using kernel gets a known amount of GPU hardware, to
prevent deadlock due to inability to go beyond the GWS barrier.

The HWS watches how many GWS entries are assigned to each process,
and goes into over-subscription mode when two processes need more
than the 64 that are available. The current KFD method for working
with this is to allocate all 64 GWS entries to each GWS-capable
process.

When more than one GWS-enabled process is in the runlist, we must
make sure the runlist is in over-subscription mode, so that the
HWS gets a chained RUN_LIST packet and continues scheduling
kernels.

Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Avoid hanging hardware in stop_cpsch

Don't use the HWS if it's known to be hanging. In a reset also
don't try to destroy the HIQ because that may hang on SRIOV if the
KIQ is unresponsive.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: shaoyunl <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Eliminate unnecessary kernel queue function pointers

Up to this point, those functions are all the same for all ASICs, so
no need to call them by functions pointers. Removing the function
pointers will greatly increase the code readablity. If there is ever
need for those function pointers, we can add it back then.

Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Eliminate ops_asic_specific in kernel queue

The ops_asic_specific function pointers are actually quite generic after
using a simple if condition. Eliminate it by code refactoring.

Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Merge CIK kernel queue functions into VI

The only difference that CIK kernel queue functions are different from
VI is avoid allocating eop_mem. We can achieve that by using a if
condition.

Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Use kernel queue v9 functions for v10

The kernel queue functions for v9 and v10 are the same except
pm_map_process_v* which have small difference, so they should be reused.
This eliminates the need of reapplying several patches which were
applied on v9 but not on v10, such as bigger GWS and more than 2
SDMA engine support which were introduced on Arcturus.

Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: use navi12 specific family id for navi12 code path

Keep the same use of CHIP_IDs for navi12 in kfd

Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: init kernel queue for renoir

Renoir is GFX v9, so init v9 kernel queue.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Support Navi14 in KFD

Initial support of Navi14 in KFD. The device IDs will be added later.

Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amd/amdkfd: Add ASIC ARCTURUS to kfd

Add initial support for ARCTURUS to kfd.

Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add navi10 support to amdkfd. (v3)

KFD (kernel fusion driver) is the kernel driver
for the compute backend for usermode compute
stack.

v2: squash in updates (Alex)
v3: squash in rebase fixes (Alex)

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Philip Cox <Philip.Cox@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Separate mqd allocation and initialization

Introduce a new mqd allocation interface and split the original
init_mqd function into two functions: allocate_mqd and init_mqd.
Also renamed uninit_mqd to free_mqd. This is preparation work to
fix a circular lock dependency.

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add VegaM support

Add the VegaM information to KFD

Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Init mqd managers in device queue manager init

Previously mqd managers was initialized on demand. As there
are only a few type of mqd managers, the on demand initialization
doesn't save too much memory. Initialize them on device
queue initialization instead and delete the get_mqd_manager
interface. This makes codes more organized for future changes.

Signed-off-by: Oak Zeng <ozeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Introduce DIQ type mqd manager

With introduction of new mqd allocation scheme for HIQ,
DIQ and HIQ use different mqd allocation scheme, DIQ
can't reuse HIQ mqd manager

Signed-off-by: Oak Zeng <ozeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Added Vega12 and Polaris12 for KFD.

Add Vega12 and Polaris12 device info and device IDs to KFD.

Signed-off-by: Gang Ba <gaba@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Vega20 bring up on amdkfd side

Add Vega20 device IDs, device info and enable it in KFD.

Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>

drm/amdkfd: Add CU-masking ioctl to KFD

CU-masking allows a KFD client to control the set of CUs used by a
user mode queue for executing compute dispatches. This can be used
for optimizing the partitioning of the GPU and minimize conflicts
between concurrent tasks.

Signed-off-by: Flora Cui <flora.cui@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Replace mqd with mqd_mgr as the variable name for mqd_manager

This will make reading code much easier.

Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Add 64-bit doorbell and wptr support to kernel queue

v2: Removed redundant 0x before %p.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Fix kernel queue rollback_packet

kq->queue->properties.write_ptr is a GPU address which can'd be
derefenced in the kernel. Use kq->wptr_kernel instead, which is the
kernel CPU address of the same buffer.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Fix goto usage

Missed a spot in previous cleanup commit:
Remove gotos that do not feature any common cleanup, and use gotos
instead of repeating cleanup commands.

According to kernel.org: "The goto statement comes in handy when a
function exits from multiple locations and some common work such as
cleanup has to be done. If there is no cleanup needed then just return
directly."

Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Add dGPU support to kernel_queue_init

Recognize dGPU ASIC families.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Hardware DWORD size is 4 bytes

Don't use sizeof(uint32_t) or similar types for hardware or firmware
DWORD size. The hardware and firmware don't care about Linux types.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Fix kernel-queue wrapping bugs

Avoid intermediate negative numbers when doing calculations with a mix
of signed and unsigned variables where implicit conversions can lead
to unexpected results.

When kernel queue buffer wraps around to 0, we need to check that rptr
won't be overwritten by the new packet.

Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Reuse CHIP_* from amdgpu v2

There are already CHIP_* definitions under amd_shared.h file on amdgpu
side, so KFD should reuse them rather than defining new ones.

Using enum for asic type requires default cases on switch statements
to prevent compiler warnings. WARN on unsupported ASICs. It should never
get there because KFD should not be initialized on unsupported devices.

v2: Replace BUG() with WARN and error return

Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Fix incorrect destroy_mqd parameter

When uninitializing a kernel queue.

Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Adjust dequeue latencies and timeouts

Adjust latencies and timeouts for dequeueing with HWS and consolidate
them in one place. Make them longer to allow long running waves to
complete without causing a timeout. The timeout is twice as long as the
latency plus some buffer to make sure we don't detect a timeout
prematurely.

Change timeouts for dequeueing HQDs without HWS. KFD_UNMAP_LATENCY is
more consistent with what the HWS does for user queues.

Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: pass queue's mqd when destroying mqd

In VI, the destroy mqd function needs to inquire fields present in the mqd
structure. That's why we need to pass it to that function instead of NULL.

Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amd: Update MEC HQD loading code for KFD

Various bug fixes and improvements that accumulated over the last two
years.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Handle remaining BUG_ONs more gracefully v2

In most cases, BUG_ONs can be replaced with WARN_ON with an error
return. In some void functions just turn them into a WARN_ON and
possibly an early exit.

v2:
* Cleaned up error handling in pm_send_unmap_queue
* Removed redundant WARN_ON in kfd_process_destroy_delayed

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Remove BUG_ONs for NULL pointer arguments

Remove BUG_ONs that check for NULL pointer arguments that are
dereferenced in the same function. Dereferencing the NULL pointer
will generate a BUG anyway, so the explicit check is redundant and
unnecessary overhead.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Remove usage of alloc(sizeof(struct...

See https://kernel.org/doc/html/latest/process/coding-style.html
under "14) Allocating Memory" for rationale behind removing the
x=alloc(sizeof(struct) style and using x=alloc(sizeof(*x) instead

Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Change x==NULL/false references to !x

Upstream prefers the !x notation to x==NULL or x==false. Along those lines
change the ==true or !=NULL references as well. Also make the references
to !x the same, excluding () for readability.

Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Consolidate and clean up log commands

Consolidate log commands so that dev_info(NULL, "Error...") uses the more
accurate pr_err, remove the module name from the log (can be seen via
dynamic debugging with +m), and the function name (can be seen via
dynamic debugging with +f). We also don't need debug messages saying
what function we're in. Those can be added by devs when needed

Don't print vendor and device ID in error messages. They are typically
the same for all GPUs in a multi-GPU system. So this doesn't add any
value to the message.

Lastly, remove parentheses around %d, %i and 0x%llX.
According to kernel.org:
"Printing numbers in parentheses (%d) adds no value and should be
avoided."

Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Pass 'struct queue_propertices' by reference

Allow init_queue() to take 'struct queue_properties' by reference.

Signed-off-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Add some missing memset zero'ing in queue init func

Signed-off-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

amdkfd: Use the canonical form in branch predicates

Found-By: Coccinelle
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: reformat some debug prints

Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: destroy mqd when destroying kernel queue

This patch adds a missing destruction of mqd, when destroying a kernel queue.
Without the destruction, there is a memory leakage when repeatedly creating and
destroying kernel queues.

Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amdkfd: Add break at the end of case

Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>

drm/amdkfd: Remove sync_with_hw() from amdkfd

This patch completely removes the sync_with_hw() because it was broken and
actually there is no point of using it.

This function was used to:

- Make sure that the submitted packet to the HIQ (which is a kernel queue) was
read by the CP. However, it was discovered that the method this function used
to do that (checking wptr == rptr) is not consistent with how the actual CP
firmware works in all cases.

- Make sure that the queue is empty before issuing the next packet. To achieve
that, the function blocked amdkfd from continuing until the recently
submitted packet was consumed. However, the acquire_packet_buffer() already
checks if there is enough room for a new packet so calling sync_with_hw() is
redundant.

Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Using new gtt sa in amdkfd

This patch change the calls throughout the amdkfd driver from the old kfd-->kgd
interface to the new kfd gtt sa inside amdkfd

v2: change the new call in sdma code that appeared because of the sdma feature

Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alexey Skidanov <Alexey.skidanov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

amdkfd: Set *buffer_ptr to NULL in case of error

In function acquire_packet_buffer() we may return -ENOMEM. In that case, we
should set the *buffer_ptr to NULL, so that calling functions which check the
*buffer_ptr value as a criteria for success, will know that
acquire_packet_buffer() failed.

Reviewed-by: Alexey Skidanov <alexey.skidanov@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>

drm/amdkfd: Add initial VI support for KQ

This patch starts to add support for the VI APU in the KQ (kernel queue)
module.

Because most (more than 90%) of the KQ code is shared among AMD's APUs, we
chose a design that performs most/all the code in the shared KQ file
(kfd_kernel_queue.c). If there is H/W specific code to be executed,
than it is written in an asic-specific extension function for that H/W.

That asic-specific extension function is called from the shared function at the
appropriate time. This requires that for every asic-specific extension function
that is implemented in a specific ASIC, there will be an equivalent
implementation in ALL ASICs, even if those implementations are just stubs.

That way we achieve:

- Maintainability: by having one copy of most of the code, we only need to
fix bugs at one locations

- Readability: very clear what is the shared code and what is done per ASIC

- Extensibility: very easy to add new H/W specific files/functions

Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Encapsulate KQ functions in ops structure

This patch does some re-org on the kernel_queue structure. It takes out
all the function pointers from the structure and puts them in a new structure,
called kernel_queue_ops. Then, it puts an instance of that structure
inside kernel_queue.

This re-org is done to prepare the KQ module to support more than one AMD APU
(Kaveri).

Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Encapsulate DQM functions in ops structure

This patch does some re-org on the device_queue_manager structure. It takes out
all the function pointers from the structure and puts them in a new structure,
called device_queue_manager_ops. Then, it puts an instance of that structure
inside device_queue_manager.

This re-org is done to prepare the DQM module to support more than one AMD APU
(Kaveri).

Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

amdkfd: use schedule() in sync_with_hw

amdkfd uses cpu_relax() in its sync_with_hw() function. Because cpu_relax() is
defined as 'REP; NOP' on x86_64, it will block the CPU from servicing
IOMMU PPR requests.

This may cause a deadlock, because sync_with_hw() won't be completed
until the PPR request has been served.

Therefore, we need to use schedule() instead of cpu_relax() as it is the
minimum requirement to allow other threads to execute.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>

amdkfd: add __iomem attribute to doorbell_ptr

This patch was done due to sparse warning. It changes the definition of
doorbell_ptr in queue_properties to be with __iomem attribute, so it would
match the type which the doorbell module functions are returning.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>

amdkfd: test_kq() can be static

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>

drm/amdkfd: Make KFD_MQD_TYPE enum types H/W agnostic

As the MQD types are common across all AMD GPUs/APUs, let's remove the CIK part
from the name.

Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

amdkfd: Add kernel queue module

The kernel queue module enables the amdkfd to establish kernel queues, not
exposed to user space.

The kernel queues are used for HIQ (HSA Interface Queue) and DIQ (Debug
Interface Queue) operations

v3: Removed use of internal typedefs and added use of the new gart allocation
functions

v4: Fixed a miscalculation in kernel queue wrapping

v5:

Move amdkfd from drm/radeon/ to drm/amd/
Change format of mqd structure to match latest KV firmware
Add support for AQL queues creation to enable working with open-source HSA
runtime
Add define for kernel queue size
Various fixes

Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>