drm/amdkfd: drop IOMMUv2 support

Now that we use the dGPU path for all APUs, drop the
IOMMUv2 support.

v2: drop the now unused queue manager functions for gfx7/8 APUs

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: update process interrupt handling for debug events

The debugger must be notified by any debugger subscribed exception
that comes from hardware interrupts.

If a debugger session exits, any exceptions it subscribed to may still
have interrupts in the interrupt ring buffer or KGD/KFD pipeline.
To prevent a new session from inheriting stale interrupts, when a new
queue is created, open an interrupt drain and allow the IH ring to drain
from a timestamped checkpoint. Then inject a custom IV so that once
the custom IV is picked up by the KFD, it's safe to close the drain
and proceed with queue creation.

The drain must also be on debug disable as SW interrupts may still
be processed. Drain at this time and clear all the exception status.

The debugger may also not be attached nor subscibed to certain
exceptions so forward them directly to the runtime.

GFX10 also requires its own IV processing, hence the creation of
kfd_int_process_v10.c. This is because the IV from SQ interrupts are
packed into a new continguous format unlike GFX9. To make this clear,
a separate interrupting handling code file was created.

Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: prepare per-process debug enable and disable

The ROCm debugger will attach to a process to debug by PTRACE and will
expect the KFD to prepare a process for the target PID, whether the
target PID has opened the KFD device or not.

This patch is to explicity handle this requirement. Further HW mode
setting and runtime coordination requirements will be handled in
following patches.

In the case where the target process has not opened the KFD device,
a new KFD process must be created for the target PID.
The debugger as well as the target process for this case will have not
acquired any VMs so handle process restoration to correctly account for
this.

To coordinate with HSA runtime, the debugger must be aware of the target
process' runtime enablement status and will copy the runtime status
information into the debugged KFD process for later query.

On enablement, the debugger will subscribe to a set of exceptions where
each exception events will notify the debugger through a pollable FIFO
file descriptor that the debugger provides to the KFD to manage.

Finally on process termination of either the debugger or the target,
debugging must be disabled if it has not been done so.

Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add KFD support for soc21 v3

Add initial support for soc21 in KFD compute
driver (Mukul)
- Add new definition for soc21 device.
- Add new file for amdgpu-kfd interface for GFX11 family.
- Add new file for queue management, interrupt handling,
mqd management for GFX11 family in KFD driver.
- Related changes/updates for soc21 device in
KFD driver.
- Repurpose last 2 entries of SDMA MQD for driver use.

v2: Add an optional argument into update queue operation (Mukul)

v3: Switch to ip version check, replace kgd_dev with
amdgpu_device (Hawking)

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Remove unused old debugger implementation

Cleanup the kfd code by removing the unused old debugger
implementation.
The address watch was only ever implemented in the upstream
driver for GFXv7 (Kaveri). The user mode tools runtime using
this API was never open-sourced. Work on the old debugger
prototype that used this API has been discontinued years ago.
Only a small piece of resetting wavefronts is kept and
is moved to kfd_device_queue_manager.c.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add CONFIG_HSA_AMD_SVM

Control whether to build SVM support into amdgpu with a Kconfig option.
This makes it easier to disable it in production kernels if this new
feature causes problems in production environments.

Use "depends on" instead of "select" for DEVICE_PRIVATE, as is
recommended for visible options.

Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: register HMM device private zone

Register vram memory as MEMORY_DEVICE_PRIVATE type resource, to
allocate vram backing pages for page migration.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: register svm range

svm range structure stores the range start address, size, attributes,
flags, prefetch location and gpu bitmap which indicates which GPU this
range maps to. Same virtual address is shared by CPU and GPUs.

Process has svm range list which uses both interval tree and list to
store all svm ranges registered by the process. Interval tree is used by
GPU vm fault handler and CPU page fault handler to get svm range
structure from the specific address. List is used to scan all ranges in
eviction restore work.

No overlap range interval [start, last] exist in svms object interval
tree. If process registers new range which has overlap with old range,
the old range split into 2 ranges depending on the overlap happens at
head or tail part of old range.

Apply attributes preferred location, prefetch location, mapping flags,
migration granularity to svm range, store mapping gpu index into bitmap.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Provide SMI events watch

When the compute is malfunctioning or performance drops, the system admin
will use SMI (System Management Interface) tool to monitor/diagnostic what
went wrong. This patch provides an event watch interface for the user
space to register devices and subscribe events they are interested. After
registered, the user can use annoymous file descriptor's poll function
with wait-time specified and wait for events to happen. Once an event
happens, the user can use read() to retrieve information related to the
event.

VM fault event is done in this patch.

v2: - remove UNREGISTER and add event ENABLE/DISABLE
- correct kfifo usage
- move event message API to kfd_ioctl.h
v3: send the event msg in text than in binary
v4: support multiple clients
v5: move events enablement from ioctl to fd write
v6: sparse fix

Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Rename kfd_kernel_queue_*.c to kfd_packet_manager_*.c

After the recent cleanup, the functionalities provided by the previous
kfd_kernel_queue_*.c are actually all packet manager related. So rename
them to reflect that.

Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Merge CIK kernel queue functions into VI

The only difference that CIK kernel queue functions are different from
VI is avoid allocating eop_mem. We can achieve that by using a if
condition.

Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Use kernel queue v9 functions for v10

The kernel queue functions for v9 and v10 are the same except
pm_map_process_v* which have small difference, so they should be reused.
This eliminates the need of reapplying several patches which were
applied on v9 but not on v10, such as bigger GWS and more than 2
SDMA engine support which were introduced on Arcturus.

Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add navi10 support to amdkfd. (v3)

KFD (kernel fusion driver) is the kernel driver
for the compute backend for usermode compute
stack.

v2: squash in updates (Alex)
v3: squash in rebase fixes (Alex)

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Philip Cox <Philip.Cox@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Merge amdkfd into amdgpu

Since KFD is only supported by single GPU driver, it makes sense to merge
amdgpu and amdkfd into one module. This patch is the initial step: merge
Kconfig and Makefile.

v2: also remove kfd from drm Kconfig

Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add SOC15 interrupt processing support

Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Add GFXv9 device queue manager

Signed-off-by: John Bridgman <john.bridgman@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Add GFXv9 MQD manager

Signed-off-by: John Bridgman <john.bridgman@amd.com>
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Add GFXv9 PM4 packet writer functions

Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Group up CRAT related functions

Take CRAT related functions out of kfd_topology.c and place them in
kfd_crat.c. This is the initial step of supporting more CRAT features,
i.e. creating virtual CRAT table for KFD devices without CRAT.

v2: Minor cleanup that was missed previously because code moved around

Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Centralize IOMMUv2 code and make it conditional

dGPUs work without IOMMUv2. Make IOMMUv2 initialization dependent on
ASIC information. Also allow building KFD without IOMMUv2 support.
This is still useful for dGPUs and prepares for enabling KFD on
architectures that don't support AMD IOMMUv2.

v2:
* Centralize IOMMUv2 code to avoid #ifdefs in too many places

v3:
* Imply AMD_IOMMU_V2 in Kconfig

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian Konig <christian.koenig@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdgpu: add license to Makefiles

Was missing license text.

Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add license to Makefiles

Was missing license text.

Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add debugfs support to KFD

This commit adds several debugfs entries for kfd:

kfd/hqds: dumps all HQDs on all GPUs for KFD-controlled compute and
SDMA RLC queues

kfd/mqds: dumps all MQDs of all KFD processes on all GPUs

kfd/rls: dumps HWS runlists on all GPUs

Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd: fix include notation and remove -Iinclude/drm flag

Include <drm/*.h> instead of relative path from include/drm, then
remove the -Iinclude/drm compiler flag.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1493009447-31524-4-git-send-email-yamada.masahiro@socionext.com

drm/amdkfd: add support for VI in MQD manager

This patch implements all the VI MQD manager functions.
This is done in a different file as the MQD format is different
between CI and VI

Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Add skeleton H/W debugger module support

This patch adds the skeleton H/W debugger module support. This code
enables registration and unregistration of a single HSA process at a
time.

The module saves the process's pasid and use it to verify that only the
registered process is allowed to execute debugger operations through the
kernel driver.

v2: rename get_dbgmgr_mutex to kfd_get_dbgmgr_mutex to namespace it

Signed-off-by: Yair Shachar <yair.shachar@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Add the events module

This patch adds the events module (kfd_events.c) and the interrupt
handle module for Kaveri (cik_event_interrupt.c).

The patch updates the interrupt_is_wanted(), so that it now calls the
interrupt isr function specific for the device that received the
interrupt. That function(implemented in cik_event_interrupt.c)
returns whether this interrupt is of interest to us or not.

The patch also updates the interrupt_wq(), so that it now calls the
device's specific wq function, which checks the interrupt source
and tries to signal relevant events.

v2:

Increase limit of signal events to 4096 per process
Remove bitfields from struct cik_ih_ring_entry
Rename radeon_kfd_event_mmap to kfd_event_mmap
Add debug prints to allocate_free_slot and allocate_signal_page
Make allocate_event_notification_slot return a correct value
Add warning prints to create_signal_event
Remove error print from IOCTL path
Reformatted debug prints in kfd_event_mmap
Map correct size (as received from mmap) in kfd_event_mmap

v3:

Reduce limit of signal events back to 256 per process
Fix allocation of kernel memory for signal events

Signed-off-by: Andrew Lewycky <Andrew.Lewycky@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Add interrupt handling module

This patch adds the interrupt handling module, kfd_interrupt.c, and its
related members in different data structures to the amdkfd driver.

The amdkfd interrupt module maintains an internal interrupt ring
per amdkfd device. The internal interrupt ring contains interrupts
that needs further handling. The extra handling is deferred to
a later time through a workqueue.

There's no acknowledgment for the interrupts we use. The hardware
simply queues a new interrupt each time without waiting.

The fixed-size internal queue means that it's possible for us to lose
interrupts because we have no back-pressure to the hardware.

However, only interrupts that are "wanted" by amdkfd, are copied into
the amdkfd s/w interrupt ring, in order to minimize the chances
for overflow of the ring.

Signed-off-by: Andrew Lewycky <Andrew.Lewycky@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Drop interrupt SW ring buffer

The work queue couldn't reliably prevent the SW ring buffer from
overflowing, so dmesg was spammed by

kfd kfd: Interrupt ring overflow, dropping interrupt.

messages when running e.g. the Atlantis Substance demo from
https://wiki.unrealengine.com/Linux_Demos on Kaveri.

Since the SW ring buffer doesn't actually do anything at this point, just
remove it for now. When actual interrupt processing code is added to
amdkfd, it should try to do things immediately and only defer to work
queues when necessary.

Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>

drm/amdkfd: Add initial VI support for KQ

This patch starts to add support for the VI APU in the KQ (kernel queue)
module.

Because most (more than 90%) of the KQ code is shared among AMD's APUs, we
chose a design that performs most/all the code in the shared KQ file
(kfd_kernel_queue.c). If there is H/W specific code to be executed,
than it is written in an asic-specific extension function for that H/W.

That asic-specific extension function is called from the shared function at the
appropriate time. This requires that for every asic-specific extension function
that is implemented in a specific ASIC, there will be an equivalent
implementation in ALL ASICs, even if those implementations are just stubs.

That way we achieve:

- Maintainability: by having one copy of most of the code, we only need to
fix bugs at one locations

- Readability: very clear what is the shared code and what is done per ASIC

- Extensibility: very easy to add new H/W specific files/functions

Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add initial VI support for DQM

This patch starts to add support for the VI APU in the DQM module.

Because most (more than 90%) of the DQM code is shared among AMD's APUs, we
chose a design that performs most/all the code in the shared DQM file
(kfd_device_queue_manager.c). If there is H/W specific code to be executed,
than it is written in an asic-specific extension function for that H/W.

That asic-specific extension function is called from the shared function at the
appropriate time. This requires that for every asic-specific extension function
that is implemented in a specific ASIC, there will be an equivalent
implementation in ALL ASICs, even if those implementations are just stubs.

That way we achieve:

- Maintainability: by having one copy of most of the code, we only need to
fix bugs at one locations

- Readability: very clear what is the shared code and what is done per ASIC

- Extensibility: very easy to add new H/W specific files/functions

Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Change MQD manager to be H/W specific

The MQDs for CI and VI are different. Therefore, the MQD manager module need to
be H/W specific.

This patch splits the current MQD manager into three files:

- kfd_mqd_manager.c, which contains common functions and initializes the
specific mqd manager module according to the H/W

- kfd_mqd_manager_cik.c, which contains Kaveri specific functions. This is
basically the old kfd_mqd_manager.c

- kfd_mqd_manager_vi.c, which will contain VI specific functions. Currently it
is not implemented except for returning NULL on initialization.

Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

amdkfd: Add interrupt handling module

This patch adds the interrupt handling module, in kfd_interrupt.c, and its
related members in different data structures to the amdkfd driver.

The amdkfd interrupt module maintains an internal interrupt ring per amdkfd
device. The internal interrupt ring contains interrupts that needs further
handling. The extra handling is deferred to a later time through a workqueue.

There's no acknowledgment for the interrupts we use. The hardware simply queues
a new interrupt each time without waiting.

The fixed-size internal queue means that it's possible for us to lose
interrupts because we have no back-pressure to the hardware.

v3:

Move amdkfd from drm/radeon/ to drm/amd/
Change device init
Made sure spin lock is taken only if init is complete
Moved bool field to the end of the structure

Signed-off-by: Andrew Lewycky <Andrew.Lewycky@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>

amdkfd: Add device queue manager module

The queue scheduler divides into two sections, one section is process bounded
and the other section is device bounded.
The device bounded section is handled by this module.
The DQM module handles queue setup, update and tear-down from the device side.
It also supports suspend/resume operation.

v3: Changed device_init, added the use of the new gart allocation functions an
Added documentation.

v4:

Fixed a race in DQM queue scheduler where dqm->lock must be held when accessing
dqm->queue_count and dqm->processes_count. This fixes runlist IB allocation
failures when DQM is under load.

Fixed race in DQM queue destruction where queues being destroyed must be
removed from qpd->queues_list prior to preemption, or concurrent queue
creation activity may reschedule them while their MQD is destroyed.

Fixed EOP queue size setting in CP_HPD_EOP_CONTROL, because the size is
specified as (log2(size_dwords)-1). The previous calculation assumed the
size was specified in bytes, which caused interference between EOP queues
when multiple MEC pipelines were active.

v5:

Move amdkfd from drm/radeon/ to drm/amd/
Change format of mqd structure to match latest KV firmware
Add support for AQL queues creation to enable working with open-source HSA
runtime
Remove unused unmap_queue function
Various fixes (Style, typos)

Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>

amdkfd: Add process queue manager module

The queue scheduler divides into two sections, one section is process bounded
and the other section is device bounded.
The process bounded section is handled by this module. The PQM handles usermode
queue setup, updates and tear-down.

v3:

Used kernel parameter to limit queues per process instead of define
Added use of doorbell address from user

v4:

Modified pqm_create_queue so that only when creating usermode queues the
driver should return the queue properties to the userspace.

Added an info message print when no more queues can be opened because of the
queue per process limitation

v5:

Move amdkfd from drm/radeon/ to drm/amd/
Various fixes

Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>

amdkfd: Add packet manager module

The packet manager module builds PM4 packets for the sole use of the CP
scheduler. Those packets are used by the HIQ to submit runlists to the CP.

v3:

Removed include of cik_mqds.h
Changed lower_32/upper_32 calls to use linux macros
Used new gart allocation functions
Added documentation

v5:

Move amdkfd from drm/radeon/ to drm/amd/
Change format of mqd structure to match latest KV firmware
Add support for AQL queues creation to enable working with open-source HSA
runtime
Always chain runlist if you have more than 1 process or if you have
over-subscription over the number of queues.
Various fixes (typos, style)

Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>

amdkfd: Add kernel queue module

The kernel queue module enables the amdkfd to establish kernel queues, not
exposed to user space.

The kernel queues are used for HIQ (HSA Interface Queue) and DIQ (Debug
Interface Queue) operations

v3: Removed use of internal typedefs and added use of the new gart allocation
functions

v4: Fixed a miscalculation in kernel queue wrapping

v5:

Move amdkfd from drm/radeon/ to drm/amd/
Change format of mqd structure to match latest KV firmware
Add support for AQL queues creation to enable working with open-source HSA
runtime
Add define for kernel queue size
Various fixes

Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>

amdkfd: Add mqd_manager module

The mqd_manager module handles MQD data structures.
MQD stands for Memory Queue Descriptor, which is used by the H/W to
keep the usermode queue state in memory.

v3:

Removed new typedefs
Removed pragma pack 4
Remove cik_mqds.h file
Changed lower_32/upper_32 calls to use linux macros
Used new gart allocation functions
Added documentation

v4:

Added missing initialization of the addr field in init_mqd()

Setting the hqd persistent.preload_req bit ON so that when queues switches
on/off, their context will kept and read from the mqd when the cp reassign
them, and thus the dispatched workload context kept consistent without any
interrupts.

v5:

Move amdkfd from drm/radeon/ to drm/amd/
Change format of mqd structure to match latest KV firmware
Add support for AQL queues creation to enable working with open-source HSA
runtime.
Various fixes

Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>

amdkfd: Add queue module

The queue module enables allocating and initializing queues uniformly.

v3: Removed typedef and redundant memset call. Broke long pr_debug print to one
liners and Added documentation.

v5: Move amdkfd from drm/radeon/ to drm/amd/

Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>

amdkfd: Add basic modules to amdkfd

This patch adds the process module and three helper modules:

- kfd_process, which handles process which open /dev/kfd

- kfd_doorbell, which provides helper functions for doorbell allocation,
release and mapping to userspace

- kfd_pasid, which provides helper functions for pasid allocation and release

- kfd_aperture, which provides helper functions for managing the LDS, Local GPU
memory and Scratch memory apertures of the process

This patch only contains the basic kfd_process module, which doesn't contain
the reference to the queue scheduler. This was done to allow easier code review.

Also, this patch doesn't contain the calls to the IOMMU driver for binding the
pasid to the device. Again, this was done to allow easier code review

The kfd_process object is created when a process opens /dev/kfd and is closed
when the mm_struct of that process is teared-down.

v3:

Removed kfd_vidmem.c file
Replaced direct mmput call to mmu_notifier release
Removed typedefs
Moved bool field to end of the structure
Added new kernel params for gart usage limitation
Added initialization of sa manager
Fixed debug messages
Remove support for LDS in 32 bit
Changed code to support mmap of doorbell pages from userspace
Added documentation for apertures

v4: Replaced RCU by SRCU for kfd_process list management

v5:

Move amdkfd from drm/radeon/ to drm/amd/
Rename kfd_aperture.c to kfd_flat_memory.c
Protect against multiple init calls
MQD size is H/W dependent so moved it to device info structure
Rename kfd_mem_obj structure's members
Use delayed function for process tear-down

Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>

amdkfd: Add topology module to amdkfd

This patch adds the topology module to the driver. The topology is exposed to
userspace through the sysfs.

The calls to add and remove a device to/from topology are done by the radeon
driver.

v3:

The CPU information, that is provided in the topology section of the amdkfd
driver, is extracted from the CRAT table. Unlike the CPU information located
in /sys/devices/system/cpu/cpu*, which is extracted from the SRAT table.

While the CPU information provided by the CRAT and the SRAT tables might be
identical, the node topology might be different. The SRAT table contains the
topology of CPU nodes only. The CRAT table contains the topology of CPU and GPU
nodes together (and can be interleaved). For example CPU node 1 in SRAT can be
CPU node 3 in CRAT. Furthermore it's worth to mention that the CRAT table
contains only HSA compatible nodes (nodes which are compliant with the HSA
spec).

To recap, amdkfd exposes a different kind of topology than the one exposed by
/sys/devices/system/cpu/cpu even though it may contain similar information.

v4:

The topology module doesn't support uevent handling and doesn't notify the
userspace about runtime modifications. It is up to the userspace to acquire
snapshots of the topology information created by the amdkfd and exposed
in sysfs.

The following is an example of how the topology looks on a Kaveri A10-7850K
system with amdkfd installed:

/sys/devices/virtual/kfd/kfd/
|
--- topology/
|
|--- generation_id
|--- system_properties
|--- nodes/
|
|--- 0/
|
|--- gpu_id
|--- name
|--- properties
|--- caches/
|
|--- 0/
|
|--- properties
|--- 1/
|
|--- properties
|--- 2/
|
|--- properties
|--- io_links/
|
|--- mem_banks/
|
|--- 0/
|
|--- properties
|--- 1/
|
|--- properties
|--- 2/
|
|--- properties
|--- 3/
|
|--- properties

v5:

Move amdkfd from drm/radeon/ to drm/amd/

Add a check if dev->gpu pointer is null before accessing it in the
node_show function in kfd_topology.c
This situation may occur when amdkfd is loaded and there is a GPU with a CRAT
table, but that GPU isn't supported by amdkfd

Signed-off-by: Evgeny Pinchuk <evgeny.pinchuk@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>

amdkfd: Add amdkfd skeleton driver

This patch adds the amdkfd skeleton driver. The driver does nothing except
define a /dev/kfd device.

It returns -ENODEV on all amdkfd IOCTLs.

v3: Move bool field to the end of structure, removed the pmc ioctls and added
a meaningful error message for ioctl error.

v5:

Create a new folder drm/amd and move amdkfd from drm/radeon/ to drm/amd/
Remove scheduler_class from kfd_priv.h as it was never used
Add skeleton implementation of the Get Version IOCTL

v6:
Update module version to the correct number and remove the "default m" from the
Kconfig file

Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>