drm/amdgpu: add imu firmware support for GC 11.5.1

This patch is to add imu firmware support for GC 11.5.1

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Don't parse IMU ucode version if it won't be loaded

When the IMU ucode is loaded by the PSP parsing the version that comes from
Linux will vary. Rather than showing the wrong data to kernel interface
consumers, avoid populating it in this case.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Use function for IP version check

Use an inline function for version check. Gives more flexibility to
handle any format changes.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu/imu_v11_0: Increase buffer size to ensure all possible values can be stored

Fixes the following W=1 kernel build warning(s):

drivers/gpu/drm/amd/amdgpu/imu_v11_0.c: In function ‘imu_v11_0_init_microcode’:
drivers/gpu/drm/amd/amdgpu/imu_v11_0.c:52:54: warning: ‘_imu.bin’ directive output may be truncated writing 8 bytes into a region of size between 4 and 33 [-Wformat-truncation=]
drivers/gpu/drm/amd/amdgpu/imu_v11_0.c:52:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 40

Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add imu firmware support for gc_11_5_0

Add imu firmware support for gc_11_5_0.

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable imu firmware for GC 11.0.4

The GC 11.0.4 needs load IMU to power up GFX before loads GFX firmware.

Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Use `amdgpu_ucode_*` helpers for GFX11

The `amdgpu_ucode_request` helper will ensure that the return code for
missing firmware is -ENODEV so that early_init can fail.

The `amdgpu_ucode_release` helper will provide symmetery on unload.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable imu firmware for GC 11.0.4

The GC 11.0.4 needs load IMU to power up GFX before loads GFX firmware.

Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable imu_rlc_ram programming for v11_0_3

All gc v11_0_3 registers in gcvml2 range have different
register offset from the ones in gc v11_0_0. v11_0_3
imu_rlc_ram programming has to be separated from v11_0_0
implementation

v2: fix checkpatch errors (Alex)

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add apu sequence in the imu v11

APU required to issue the enable GFX IMU message after IMU reset.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use the callback function for reset status polling on IMU

Switch to use the callback function to poll the reset status on IMU.
Because it will have different sequency on other ASICs.

v2: drop unused variable (Alex)

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: introduce two work mode for imu

IMU has two work mode such as debug mode and mission mode. Current GC
v11_0_0 is using the debug mode.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: make program_imu_rlc_ram static

This symbol is not used outside of imu_v11_0.c, so marks it
static.

Fixes the following w1 warning:

drivers/gpu/drm/amd/amdgpu/imu_v11_0.c:302:6: warning: no previous
prototype for ‘program_imu_rlc_ram’ [-Wmissing-prototypes].

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable imu firmware for GC 11.0.1

The GC 11.0.1 needs load IMU to power up the GFX before loads GFX
firmware.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update rlc ram for gc v11_0_2

Add imu rlc ram register settings for gc v11_0_2

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add gc v11_0_2 imu firmware

add gc v11_0_2 imu firmware

Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: support imu for gfx11

Add support to initialize imu for gfx v11.
IMU is a new power management block for
gfx which manages gfx power.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>