treewide: rename pinctrl_gpio_direction_output_new()

Now that pinctrl_gpio_direction_output() is no longer used, let's drop
the '_new' suffix from its improved variant.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

treewide: rename pinctrl_gpio_direction_input_new()

Now that pinctrl_gpio_direction_input() is no longer used, let's drop the
'_new' suffix from its improved variant.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

gpio: rockchip: use new pinctrl GPIO helpers

Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

gpio: rockchip: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

gpio: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

gpio: rockchip: Do not mention legacy API in the code

Replace mentioning of legacy API by the latest one.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

gpio/rockchip: fix refcount leak in rockchip_gpiolib_register()

The node returned by of_get_parent() with refcount incremented,
of_node_put() needs be called when finish using it. So add it in the
end of of_pinctrl_get().

Fixes: 936ee2675eee ("gpio/rockchip: add driver for rockchip gpio")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

gpio: rockchip: request GPIO mux to pinctrl when setting direction

Before the split of gpio and pinctrl sections in their own driver,
rockchip_set_mux was called in pinmux_ops.gpio_set_direction for
configuring a pin in its GPIO function.

This is essential for cases where pinctrl is "bypassed" by gpio
consumers otherwise the GPIO function is not configured for the pin and
it does not work. Such was the case for the sysfs/libgpiod userspace
GPIO handling.

Let's call pinctrl_gpio_direction_input/output when setting the
direction of a GPIO so that the pinctrl core requests from the rockchip
pinctrl driver to put the pin in its GPIO function.

Fixes: 9ce9a02039de ("pinctrl/rockchip: drop the gpio related codes")
Fixes: 936ee2675eee ("gpio/rockchip: add driver for rockchip gpio")
Cc: stable@vger.kernel.org
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20220930132033.4003377-3-foss+kernel@0leil.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpio/rockchip: Convert to generic_handle_domain_irq()

Follow commit dbd1c54fc820 ("gpio: Bulk conversion to
generic_handle_domain_irq()").

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

pinctrl: rockchip: Enhance support for IRQ_TYPE_EDGE_BOTH

Switching between falling/rising edges for IRQ_TYPE_EDGE_BOTH on pins that
require debounce can cause the device to lose events due to a desync
between pin state and irq type.

This problem is resolved by switching between IRQ_TYPE_LEVEL_LOW and
IRQ_TYPE_LEVEL_HIGH instead.

Fixes: 936ee2675eee ("gpio/rockchip: add driver for rockchip gpio")
Signed-off-by: João H. Spies <jhlspies@gmail.com>
Link: https://lore.kernel.org/r/20220808025121.110223-1-jhlspies@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpio: rockchip: add support for rk3588

Add V2.1 rockchip gpio controller type, which is part of the
RK3588 SoC.

Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>

gpio/rockchip: handle deferring input-enable pinconfs

Add support for deferred PIN_CONFIG_INPUT_ENABLE handling.

Signed-off-by: Caleb Connolly <kc@postmarketos.org>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220328005005.72492-4-kc@postmarketos.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl/rockchip: support deferring other gpio params

Add support for deferring other params like PIN_CONFIG_INPUT_ENABLE.
This will be used to add support for PIN_CONFIG_INPUT_ENABLE to the
driver.

Fixes: e7165b1dff06 ("pinctrl/rockchip: add a queue for deferred pin output settings on probe")
Fixes: 59dd178e1d7c ("gpio/rockchip: fetch deferred output settings on probe")
Signed-off-by: Caleb Connolly <kc@postmarketos.org>
Link: https://lore.kernel.org/r/20220328005005.72492-2-kc@postmarketos.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpio: rockchip: Reset int_bothedge when changing trigger

With v2 hardware, an IRQ can be configured to trigger on both edges via
a bit in the int_bothedge register. Currently, the driver sets this bit
when changing the trigger type to IRQ_TYPE_EDGE_BOTH, but fails to reset
this bit if the trigger type is later changed to something else. This
causes spurious IRQs, and when using gpio-keys with wakeup-event-action
set to EV_ACT_(DE)ASSERTED, those IRQs translate into spurious wakeups.

Fixes: 3bcbd1a85b68 ("gpio/rockchip: support next version gpio controller")
Reported-by: Guillaume Savaton <guillaume@baierouge.fr>
Tested-by: Guillaume Savaton <guillaume@baierouge.fr>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

gpio: Get rid of duplicate of_node assignment in the drivers

GPIO library does copy the of_node from the parent device of
the GPIO chip, there is no need to repeat this in the individual
drivers. Remove these assignment all at once.

For the details one may look into the of_gpio_dev_init() implementation.

While at it, remove duplicate parent device assignment where it is the case.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-By: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

gpio: rockchip: lock GPIOs used as interrupts

Use the standard gpiochip request/release resource functions so that any
GPIOs used as interrupts are properly locked. This allows libgpiod to
correctly show these GPIOs as in-use.

Signed-off-by: John Keeping <john@metanate.com>
Tested-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

gpio/rockchip: fetch deferred output settings on probe

Fetch the output settings the pinctrl driver may have created
for pinctrl hogs and set the relevant pins as requested.

Fixes: 9ce9a02039de ("pinctrl/rockchip: drop the gpio related codes")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210913224926.1260726-5-heiko@sntech.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpio/rockchip: fix get_direction value handling

The function uses the newly introduced rockchip_gpio_readl_bit()
which directly returns the actual value of the requeste bit.
So using the existing bit-wise check for the bit inside the value
will always return 0.

Fix this by dropping the bit manipulation on the result.

Fixes: 3bcbd1a85b68 ("gpio/rockchip: support next version gpio controller")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

gpio/rockchip: extended debounce support is only available on v2

The gpio driver runs into issues on v1 gpio blocks, as the db_clk
and the whole extended debounce support is only ever defined on v2.
So checking for the IS_ERR on the db_clk is not enough, as it will
be NULL on v1.

Fix this by adding the needed condition for v2 first before checking
the existence of the db_clk.

This caused my rk3288-veyron-pinky to enter a reboot loop when it
tried to enable the power-key as adc-key device.

Fixes: 3bcbd1a85b68 ("gpio/rockchip: support next version gpio controller")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

gpio/rockchip: drop irq_gc_lock/irq_gc_unlock for irq set type

There has spin lock for irq set type already, so drop irq_gc_lock and
irq_gc_unlock.

Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Link: https://lore.kernel.org/r/20210816012135.1119234-1-jay.xu@rock-chips.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpio/rockchip: support next version gpio controller

The next version gpio controller on SoCs like rk3568 have more write
mask bits for registers.

Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Link: https://lore.kernel.org/r/20210816012123.1119179-1-jay.xu@rock-chips.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpio/rockchip: use struct rockchip_gpio_regs for gpio controller

Store register offsets in the struct rockchip_gpio_regs, this patch
prepare for the driver update for new gpio controller.

Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Link: https://lore.kernel.org/r/20210816012111.1119125-1-jay.xu@rock-chips.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpio/rockchip: add driver for rockchip gpio

This patch add support for rockchip gpio controller, which is supported
in pinctrl driver in the past.

With this patch, the pinctrl-rockchip driver will drop gpio related
codes and populate platform driver to gpio-rockchip.

Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Link: https://lore.kernel.org/r/20210816012053.1119069-1-jay.xu@rock-chips.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>