gpio: use raw spinlock for gpio chip shadowed data

In case of PREEMPT_RT, there is a raw_spinlock -> spinlock dependency
as the lockdep report shows.

__irq_set_handler
irq_get_desc_buslock
__irq_get_desc_lock
raw_spin_lock_irqsave(&desc->lock, *flags); // raw spinlock get here
__irq_do_set_handler
mask_ack_irq
dwapb_irq_ack
spin_lock_irqsave(&gc->bgpio_lock, flags); // sleep able spinlock
irq_put_desc_busunlock

Replace with a raw lock to avoid BUGs. This lock is only used to access
registers, and It's safe to replace with the raw lock without bad
influence.

[ 15.090359][ T1] =============================
[ 15.090365][ T1] [ BUG: Invalid wait context ]
[ 15.090373][ T1] 5.10.59-rt52-00983-g186a6841c682-dirty #3 Not tainted
[ 15.090386][ T1] -----------------------------
[ 15.090392][ T1] swapper/0/1 is trying to lock:
[ 15.090402][ T1] 70ff00018507c188 (&gc->bgpio_lock){....}-{3:3}, at: _raw_spin_lock_irqsave+0x1c/0x28
[ 15.090470][ T1] other info that might help us debug this:
[ 15.090477][ T1] context-{5:5}
[ 15.090485][ T1] 3 locks held by swapper/0/1:
[ 15.090497][ T1] #0: c2ff0001816de1a0 (&dev->mutex){....}-{4:4}, at: __device_driver_lock+0x98/0x104
[ 15.090553][ T1] #1: ffff90001485b4b8 (irq_domain_mutex){+.+.}-{4:4}, at: irq_domain_associate+0xbc/0x6d4
[ 15.090606][ T1] #2: 4bff000185d7a8e0 (lock_class){....}-{2:2}, at: _raw_spin_lock_irqsave+0x1c/0x28
[ 15.090654][ T1] stack backtrace:
[ 15.090661][ T1] CPU: 4 PID: 1 Comm: swapper/0 Not tainted 5.10.59-rt52-00983-g186a6841c682-dirty #3
[ 15.090682][ T1] Hardware name: Horizon Robotics Journey 5 DVB (DT)
[ 15.090692][ T1] Call trace:
......
[ 15.090811][ T1] _raw_spin_lock_irqsave+0x1c/0x28
[ 15.090828][ T1] dwapb_irq_ack+0xb4/0x300
[ 15.090846][ T1] __irq_do_set_handler+0x494/0xb2c
[ 15.090864][ T1] __irq_set_handler+0x74/0x114
[ 15.090881][ T1] irq_set_chip_and_handler_name+0x44/0x58
[ 15.090900][ T1] gpiochip_irq_map+0x210/0x644

Signed-off-by: Schspa Shi <schspa@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Doug Berger <opendmb@gmail.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

drivers: mcb: use symbol namespaces

Now that we have symbol namespaces, use them in MCB to not pollute the
default namespace with MCB internals.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Jessica Yu <jeyu@kernel.org>
Reviewed-by: Michael Moese <mmoese@suse.de>
Link: https://lore.kernel.org/r/20191016100158.1400-1-jthumshirn@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 of the license

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 315 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: Fix wrong rounding in gpio-menz127

men_z127_debounce() tries to round up and down, but uses functions which
are only suitable when the divider is a power of two, which is not the
case. Use the appropriate ones.

Found by static check. Compile tested.

Fixes: f436bc2726c64 ("gpio: add driver for MEN 16Z127 GPIO controller")
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl / gpio: Introduce .set_config() callback for GPIO chips

Currently we already have two pin configuration related callbacks
available for GPIO chips .set_single_ended() and .set_debounce(). In
future we expect to have even more, which does not scale well if we need
to add yet another callback to the GPIO chip structure for each possible
configuration parameter.

Better solution is to reuse what we already have available in the
generic pinconf.

To support this, we introduce a new .set_config() callback for GPIO
chips. The callback takes a single packed pin configuration value as
parameter. This can then be extended easily beyond what is currently
supported by just adding new types to the generic pinconf enum.

If the GPIO driver is backed up by a pinctrl driver the GPIO driver can
just assign gpiochip_generic_config() (introduced in this patch) to
.set_config and that will take care configuration requests are directed
to the pinctrl driver.

We then convert the existing drivers over .set_config() and finally
remove the .set_single_ended() and .set_debounce() callbacks.

Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpio: remove redundant owner assignments of drivers

A platform_driver need not set an owner since it will be populated
by platform_driver_register().
Likewise for mcb_driver (gpio-menz127.c).

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpio: menz127: use the new open drain callback

The menz127 driver tries to support open drain by detecting it
at request time. However: without the new callbacks from the
gpiolib it is not really working: the core will still just emulate
the open drain mode by switching the line to an input.

By adding a hook into the new .set_single_ended() call rather than
trying to autodetect at request() time, proper open drain can be
supported.

Cc: Andreas Werner <andy@wernerandy.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpio: menz127: Drop lock field from struct men_z127_gpio

Current code uses a uninitialized spin lock.
bgpio_init() already initialized a spin lock, so let's switch to use
&gc->bgpio_lock instead and remove the lock from struct men_z127_gpio.

Fixes: f436bc2726c6 "gpio: add driver for MEN 16Z127 GPIO controller"
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpio: menz127: Drop *mdev field from struct men_z127_gpio

No need to store *medv in struct men_z127_gpio.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpio: add driver for MEN 16Z127 GPIO controller

The 16Z127 is a 32bit GPIO controller on a MCB FPGA.
Every single line can be configured as input and output.

Push pull and open drain are supported as well as setting
a debounce value for the input lines.

Signed-off-by: Andreas Werner <andy@wernerandy.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>