gpio: cadence: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

gpio: cadence: Convert to immutable irq_chip

Convert the driver to immutable irq-chip with a bit of
intuition.

Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

gpio: use raw spinlock for gpio chip shadowed data

In case of PREEMPT_RT, there is a raw_spinlock -> spinlock dependency
as the lockdep report shows.

__irq_set_handler
irq_get_desc_buslock
__irq_get_desc_lock
raw_spin_lock_irqsave(&desc->lock, *flags); // raw spinlock get here
__irq_do_set_handler
mask_ack_irq
dwapb_irq_ack
spin_lock_irqsave(&gc->bgpio_lock, flags); // sleep able spinlock
irq_put_desc_busunlock

Replace with a raw lock to avoid BUGs. This lock is only used to access
registers, and It's safe to replace with the raw lock without bad
influence.

[ 15.090359][ T1] =============================
[ 15.090365][ T1] [ BUG: Invalid wait context ]
[ 15.090373][ T1] 5.10.59-rt52-00983-g186a6841c682-dirty #3 Not tainted
[ 15.090386][ T1] -----------------------------
[ 15.090392][ T1] swapper/0/1 is trying to lock:
[ 15.090402][ T1] 70ff00018507c188 (&gc->bgpio_lock){....}-{3:3}, at: _raw_spin_lock_irqsave+0x1c/0x28
[ 15.090470][ T1] other info that might help us debug this:
[ 15.090477][ T1] context-{5:5}
[ 15.090485][ T1] 3 locks held by swapper/0/1:
[ 15.090497][ T1] #0: c2ff0001816de1a0 (&dev->mutex){....}-{4:4}, at: __device_driver_lock+0x98/0x104
[ 15.090553][ T1] #1: ffff90001485b4b8 (irq_domain_mutex){+.+.}-{4:4}, at: irq_domain_associate+0xbc/0x6d4
[ 15.090606][ T1] #2: 4bff000185d7a8e0 (lock_class){....}-{2:2}, at: _raw_spin_lock_irqsave+0x1c/0x28
[ 15.090654][ T1] stack backtrace:
[ 15.090661][ T1] CPU: 4 PID: 1 Comm: swapper/0 Not tainted 5.10.59-rt52-00983-g186a6841c682-dirty #3
[ 15.090682][ T1] Hardware name: Horizon Robotics Journey 5 DVB (DT)
[ 15.090692][ T1] Call trace:
......
[ 15.090811][ T1] _raw_spin_lock_irqsave+0x1c/0x28
[ 15.090828][ T1] dwapb_irq_ack+0xb4/0x300
[ 15.090846][ T1] __irq_do_set_handler+0x494/0xb2c
[ 15.090864][ T1] __irq_set_handler+0x74/0x114
[ 15.090881][ T1] irq_set_chip_and_handler_name+0x44/0x58
[ 15.090900][ T1] gpiochip_irq_map+0x210/0x644

Signed-off-by: Schspa Shi <schspa@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Doug Berger <opendmb@gmail.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

gpio: Bulk conversion to generic_handle_domain_irq()

Wherever possible, replace constructs that match either
generic_handle_irq(irq_find_mapping()) or
generic_handle_irq(irq_linear_revmap()) to a single call to
generic_handle_domain_irq().

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>

gpio: cadence: Add missing MODULE_DEVICE_TABLE

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

gpio: cadence: Pass irqchip when adding gpiochip

We need to convert all old gpio irqchips to pass the irqchip
setup along when adding the gpio_chip. For more info see
drivers/gpio/TODO.

For chained irqchips this is a pretty straight-forward
conversion.

Cc: Jan Kotas <jank@cadence.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Jan Kotas <jank@cadence.com>
Link: https://lore.kernel.org/r/20190809131804.20352-1-linus.walleij@linaro.org

drivers: gpio: cadence: use devm_platform_ioremap_resource()

Use the new helper that wraps the calls to platform_get_resource()
and devm_ioremap_resource() together.

Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpio: Add Cadence GPIO driver

This patch adds a driver for Cadence GPIO controller.

It can be enabled with GPIO_CADENCE Kconfig option.
It uses generic GPIO infrastructure and works
as an interrupt controller.
At the moment it only supports level sensitive irqs.

Signed-off-by: Jan Kotas <jank@cadence.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>