dmaengine: dw-edma: Use DMA engine device debugfs subdirectory

Since all DW eDMA read and write channels are now installed in a framework
of a single DMA engine device, move all the DW eDMA-specific debugfs nodes
into a ready-to-use DMA-engine debugfs subdirectory. It's created during
the DMA-device registration and can be found in the dma_device.dbg_dev_root
field.

Link: https://lore.kernel.org/r/20230113171409.30470-19-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>

dmaengine: dw-edma: Detach the private data and chip info structures

"struct dw_edma_chip" contains an internal structure "struct dw_edma" that
is used by the eDMA core internally and should not be touched by the eDMA
controller drivers themselves. But currently, the eDMA controller drivers
like "dw-edma-pci" allocate and populate this internal structure before
passing it on to the eDMA core. The eDMA core further populates the
structure and uses it. This is wrong!

Hence, move all the "struct dw_edma" specifics from controller drivers to
the eDMA core.

Link: https://lore.kernel.org/r/20220524152159.2370739-3-Frank.Li@nxp.com
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>

dmaengine: dw-edma: Move struct dentry variable from static definition into dw_edma struct

Move struct dentry variable from static definition (dw-edma-v0-debugfs.c)
into dw_edma struct (dw-edma-core.h)

Also the variable was renamed from base_dir to debugfs.

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Link: https://lore.kernel.org/r/07c1167b671e7b175700e2e7061cf0b3dd8c6adb.1613674948.git.gustavo.pimentel@synopsys.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: Add Synopsys eDMA IP version 0 debugfs support

Add Synopsys eDMA IP version 0 debugfs support to assist any debug
in the future.

Creates a file system structure composed by folders and files that mimic
the IP register map (this files are read only) to ease any debug.

To enable this feature is necessary to select DEBUG_FS option on kernel
configuration.

Small output example:

(eDMA IP version 0, unroll, 1 write + 1 read channels)

% mount -t debugfs none /sys/kernel/debug/
% tree /sys/kernel/debug/dw-edma-core:0/
dw-edma/
├── version
├── mode
├── wr_ch_cnt
├── rd_ch_cnt
└── registers
    ├── ctrl_data_arb_prior
    ├── ctrl
    ├── write
    │   ├── engine_en
    │   ├── doorbell
    │   ├── ch_arb_weight_low
    │   ├── ch_arb_weight_high
    │   ├── int_status
    │   ├── int_mask
    │   ├── int_clear
    │   ├── err_status
    │   ├── done_imwr_low
    │   ├── done_imwr_high
    │   ├── abort_imwr_low
    │   ├── abort_imwr_high
    │   ├── ch01_imwr_data
    │   ├── ch23_imwr_data
    │   ├── ch45_imwr_data
    │   ├── ch67_imwr_data
    │   ├── linked_list_err_en
    │   ├── engine_chgroup
    │   ├── engine_hshake_cnt_low
    │   ├── engine_hshake_cnt_high
    │   ├── ch0_pwr_en
    │   ├── ch1_pwr_en
    │   ├── ch2_pwr_en
    │   ├── ch3_pwr_en
    │   ├── ch4_pwr_en
    │   ├── ch5_pwr_en
    │   ├── ch6_pwr_en
    │   ├── ch7_pwr_en
    │   └── channel:0
    │       ├── ch_control1
    │       ├── ch_control2
    │       ├── transfer_size
    │       ├── sar_low
    │       ├── sar_high
    │       ├── dar_high
    │       ├── llp_low
    │       └── llp_high
    └── read
        ├── engine_en
        ├── doorbell
        ├── ch_arb_weight_low
        ├── ch_arb_weight_high
        ├── int_status
        ├── int_mask
        ├── int_clear
        ├── err_status_low
        ├── err_status_high
        ├── done_imwr_low
        ├── done_imwr_high
        ├── abort_imwr_low
        ├── abort_imwr_high
        ├── ch01_imwr_data
        ├── ch23_imwr_data
        ├── ch45_imwr_data
        ├── ch67_imwr_data
        ├── linked_list_err_en
        ├── engine_chgroup
        ├── engine_hshake_cnt_low
        ├── engine_hshake_cnt_high
        ├── ch0_pwr_en
        ├── ch1_pwr_en
        ├── ch2_pwr_en
        ├── ch3_pwr_en
        ├── ch4_pwr_en
        ├── ch5_pwr_en
        ├── ch6_pwr_en
        ├── ch7_pwr_en
        └── channel:0
            ├── ch_control1
            ├── ch_control2
            ├── transfer_size
            ├── sar_low
            ├── sar_high
            ├── dar_high
            ├── llp_low
            └── llp_high

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>