crypto: sa2ul - Return crypto_aead_setkey to transfer the error

Return crypto_aead_setkey() in order to transfer the error if
it fails.

Fixes: d2c8ac187fc9 ("crypto: sa2ul - Add AEAD algorithm support")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sa2ul - Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: drivers - Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: drivers - remove unnecessary (void*) conversions

Pointer variables of void * type do not require type cast.

Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sa2ul - Check engine status before enabling

There is a engine status register that can be used to check if the
different HW crypto engines are enabled. Check that first and then only
try to enable the engines if they are not already on.

This has a couple benefits. First we don't need to use match_data for
this. Second, this driver can now work on HS devices where the engine
control registers are read-only and writing causes a firewall exception.

Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sa2ul - Set the supported_algos bits individually

Setting these individually gives a better picture of supported
functions at a glance. Plus if the list changes an unwanted
one will not accidentally get set with GENMASK.

Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sa2ul - Add the new compatible for AM62

Add the new compatible for am62x in of_match_table.

Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sa2ul - Use bitfield helpers

Use the FIELD_PREP() helper, instead of open-coding the same operation.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sa2ul - Use the defined variable to clean code

Use the defined variable "dev" to make the code cleaner.

Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sa2ul - Remove unused auth_len variable

This patch removes the unused auth_len variable from
sa_aead_dma_in_callback.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sa2ul - Remove child devices in remove

The sa_ul_probe creates child devices using of_platform_populate(),
but these are not cleaned up in driver remove. Clean these up
by removing the child devices using of_platform_depopulate().

Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sa2ul - Use devm_platform_ioremap_resource()

Simplify the platform_get_resource() and devm_ioremap_resource()
calls with devm_platform_ioremap_resource(). Also add error checking
and move up this block to simplify the cleanup in sa_ul_probe().

Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sa2ul - Use of_device_get_match_data() helper

Simplify the probe function by using the of_device_get_match_data()
helper instead of open coding. The logic is also moved up to fix the
missing pm_runtime cleanup in case of a match failure.

Fixes: 0bc42311cdff ("crypto: sa2ul - Add support for AM64")
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sa2ul - Fix pm_runtime enable in sa_ul_probe()

The pm_runtime APIs added first in commit 7694b6ca649f ("crypto: sa2ul -
Add crypto driver") are not unwound properly and was fixed up partially
in commit 13343badae09 ("crypto: sa2ul - Fix PM reference leak in
sa_ul_probe()"). This fixed up the pm_runtime usage count but not the
state. Fix this properly.

Fixes: 13343badae09 ("crypto: sa2ul - Fix PM reference leak in sa_ul_probe()")
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sa2ul - Fix leaks on failure paths with sa_dma_init()

The sa_dma_init() function doesn't release the requested dma channels
on all failure paths. Any failure in this function also ends up
leaking the dma pool created in sa_init_mem() in the sa_ul_probe()
function. Fix all of these issues.

Fixes: 7694b6ca649f ("crypto: sa2ul - Add crypto driver")
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sa2ul - Add support for AM64

The sa2ul module in am64 have limited support for algorithms, and the
priv and priv_id used on the platform is different compared to AM654 or
j721e.

Use match data to get the SoC specific information and use it throughout
the driver.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vaibhav Gupta <v_gupta@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sa2ul - Support for per channel coherency

On AM64 the DMA channel for sa2ul can be configured to be coherent or
non coherent via DT binding.

Use the dmaengine_get_device_for_dma_api() to get the device pointer which
should be used for with the dma_api to use matching dma_ops for the
channel coherency/non coherency.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vaibhav Gupta <v_gupta@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sa2ul - Fix PM reference leak in sa_ul_probe()

pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.

Signed-off-by: Shixin Liu <liushixin2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sa2ul - Fix memory leak of rxd

There are two error return paths that are not freeing rxd and causing
memory leaks. Fix these.

Addresses-Coverity: ("Resource leak")
Fixes: 00c9211f60db ("crypto: sa2ul - Fix DMA mapping API usage")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sha - split sha.h into sha1.h and sha2.h

Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2,
and <crypto/sha3.h> contains declarations for SHA-3.

This organization is inconsistent, but more importantly SHA-1 is no
longer considered to be cryptographically secure. So to the extent
possible, SHA-1 shouldn't be grouped together with any of the other SHA
versions, and usage of it should be phased out.

Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and
<crypto/sha2.h>, and make everyone explicitly specify whether they want
the declarations for SHA-1, SHA-2, or both.

This avoids making the SHA-1 declarations visible to files that don't
want anything to do with SHA-1. It also prepares for potentially moving
sha1.h into a new insecure/ or dangerous/ directory.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sa2ul - Reduce stack usage

This patch reduces the stack usage in sa2ul:

1. Move the exported sha state into sa_prepare_iopads so that it
can occupy the same space as the k_pad buffer.

2. Use one buffer for ipad/opad in sa_prepare_iopads.

3. Remove ipad/opad buffer from sa_set_sc_auth.

4. Use async skcipher fallback and remove on-stack request from
sa_cipher_run.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: d2c8ac187fc9 ("crypto: sa2ul - Add AEAD algorithm support")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sa2ul - Fix DMA mapping API usage

Make sure that we call the dma_unmap_sg on the correct scatterlist on
completion with the correct sg_nents.

Use sg_table to managed the DMA mapping and at the same time add the needed
dma_sync calls for the sg_table.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sa2ul - Fix pm_runtime_get_sync() error checking

The pm_runtime_get_sync() function returns either 0 or 1 on success but
this code treats a return of 1 as a failure.

Fixes: 7694b6ca649f ("crypto: sa2ul - Add crypto driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sa2ul - fix compiler warning produced by clang

Clang detects a warning for an assignment that doesn't really do
anything. Fix this by removing the offending piece of code.

Fixes: 7694b6ca649f ("crypto: sa2ul - Add crypto driver")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com> # build
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sa2ul - Simplify with dev_err_probe()

Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and also it prints the error value.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sa2ul - Fix pointer-to-int-cast warning

drivers/crypto/sa2ul.c: In function ‘sa_sha_init’:
drivers/crypto/sa2ul.c:1486:33: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
crypto_ahash_digestsize(tfm), (u64)rctx);
^
./include/linux/dev_printk.h:123:47: note: in definition of macro ‘dev_dbg’
dev_printk(KERN_DEBUG, dev, dev_fmt(fmt), ##__VA_ARGS__); \
^~~~~~~~~~~

Use %p to print rctx pointer.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sa2ul - Fix inconsistent IS_ERR and PTR_ERR

Fix inconsistent IS_ERR and PTR_ERR in sa_dma_init(). The proper pointer
to be passed as argument to PTR_ERR() is dd->dma_tx.

This bug was detected with the help of Coccinelle.

Fixes: 7694b6ca649f ("crypto: sa2ul - Add crypto driver")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sa2ul - add device links to child devices

The child devices for sa2ul (like the RNG) have hard dependency towards
the parent, they can't function without the parent enabled. Add device
link for this purpose so that the dependencies are taken care of properly.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sa2ul - Add AEAD algorithm support

Add support for sa2ul hardware AEAD for hmac(sha256),cbc(aes) and
hmac(sha1),cbc(aes) algorithms.

Signed-off-by: Keerthy <j-keerthy@ti.com>
[t-kristo@ti.com: number of bug fixes, major refactoring and cleanup of
code]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sa2ul - add sha1/sha256/sha512 support

Add support for sha1/sha256/sha512 sa2ul based hardware authentication.
With the hash update mechanism, we always use software fallback
mechanism for now, as there is no way to fetch the partial hash state
from the HW accelerator. HW accelerator is only used when digest is
called for a data chunk of known size.

Signed-off-by: Keerthy <j-keerthy@ti.com>
[t-kristo@ti.com: various bug fixes, major cleanups and refactoring of code]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sa2ul - Add crypto driver

Adds a basic crypto driver and currently supports AES/3DES
in cbc mode for both encryption and decryption.

Signed-off-by: Keerthy <j-keerthy@ti.com>
[t-kristo@ti.com: major re-work to fix various bugs in the driver and to
cleanup the code]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>