crypto: nx - Repair some kernel-doc problems

Fixes the following W=1 kernel build warning(s):

drivers/crypto/nx/nx-aes-cbc.c:24: warning: Function parameter or member 'tfm' not described in 'cbc_aes_nx_set_key'
drivers/crypto/nx/nx-aes-cbc.c:24: warning: Function parameter or member 'in_key' not described in 'cbc_aes_nx_set_key'
drivers/crypto/nx/nx-aes-cbc.c:24: warning: Function parameter or member 'key_len' not described in 'cbc_aes_nx_set_key'
drivers/crypto/nx/nx-aes-cbc.c:24: warning: expecting prototype for Nest Accelerators driver(). Prototype was for cbc_aes_nx_set_key() instead
drivers/crypto/nx/nx_debugfs.c:34: warning: Function parameter or member 'drv' not described in 'nx_debugfs_init'
drivers/crypto/nx/nx_debugfs.c:34: warning: expecting prototype for Nest Accelerators driver(). Prototype was for nx_debugfs_init() instead
drivers/crypto/nx/nx.c:31: warning: Incorrect use of kernel-doc format: * nx_hcall_sync - make an H_COP_OP hcall for the passed in op structure
drivers/crypto/nx/nx.c:43: warning: Function parameter or member 'nx_ctx' not described in 'nx_hcall_sync'
drivers/crypto/nx/nx.c:43: warning: Function parameter or member 'op' not described in 'nx_hcall_sync'
drivers/crypto/nx/nx.c:43: warning: Function parameter or member 'may_sleep' not described in 'nx_hcall_sync'
drivers/crypto/nx/nx.c:43: warning: expecting prototype for Nest Accelerators driver(). Prototype was for nx_hcall_sync() instead
drivers/crypto/nx/nx.c:209: warning: Function parameter or member 'nbytes' not described in 'trim_sg_list'

Cc: "Breno Leitão" <leitao@debian.org>
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: Paulo Flabiano Smorigo <pfsmorigo@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Kent Yoder <yoder1@us.ibm.com>
Cc: linux-crypto@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

vio: make remove callback return void

The driver core ignores the return value of struct bus_type::remove()
because there is only little that can be done. To simplify the quest to
make this function return void, let struct vio_driver::remove() return
void, too. All users already unconditionally return 0, this commit makes
it obvious that returning an error code is a bad idea.

Note there are two nominally different implementations for a vio bus:
one in arch/sparc/kernel/vio.c and the other in
arch/powerpc/platforms/pseries/vio.c. This patch only adapts the powerpc
one.

Before this patch for a device that was bound to a driver without a
remove callback vio_cmo_bus_remove(viodev) wasn't called. As the device
core still considers the device unbound after vio_bus_remove() returns
calling this unconditionally is the consistent behaviour which is
implemented here.

Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Acked-by: Lijun Pan <ljp@linux.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[mpe: Drop unneeded hvcs_remove() forward declaration, squash in
change from sfr to drop ibmvnic_remove() forward declaration]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210225221834.160083-1-uwe@kleine-koenig.org

crypto: sha - split sha.h into sha1.h and sha2.h

Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2,
and <crypto/sha3.h> contains declarations for SHA-3.

This organization is inconsistent, but more importantly SHA-1 is no
longer considered to be cryptographically secure. So to the extent
possible, SHA-1 shouldn't be grouped together with any of the other SHA
versions, and usage of it should be phased out.

Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and
<crypto/sha2.h>, and make everyone explicitly specify whether they want
the declarations for SHA-1, SHA-2, or both.

This avoids making the SHA-1 declarations visible to files that don't
want anything to do with SHA-1. It also prepares for potentially moving
sha1.h into a new insecure/ or dangerous/ directory.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

mm, treewide: rename kzfree() to kfree_sensitive()

As said by Linus:

A symmetric naming is only helpful if it implies symmetries in use.
Otherwise it's actively misleading.

In "kzalloc()", the z is meaningful and an important part of what the
caller wants.

In "kzfree()", the z is actively detrimental, because maybe in the
future we really _might_ want to use that "memfill(0xdeadbeef)" or
something. The "zero" part of the interface isn't even _relevant_.

The main reason that kzfree() exists is to clear sensitive information
that should not be leaked to other future users of the same memory
objects.

Rename kzfree() to kfree_sensitive() to follow the example of the recently
added kvfree_sensitive() and make the intention of the API more explicit.
In addition, memzero_explicit() is used to clear the memory to make sure
that it won't get optimized away by the compiler.

The renaming is done by using the command sequence:

git grep -w --name-only kzfree |\
xargs sed -i 's/kzfree/kfree_sensitive/'

followed by some editing of the kfree_sensitive() kerneldoc and adding
a kzfree backward compatibility macro in slab.h.

[akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h]
[akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more]

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Joe Perches <joe@perches.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

crypto: nx - convert AES-CTR to skcipher API

Convert the PowerPC Nest (NX) implementation of AES-CTR from the
deprecated "blkcipher" API to the "skcipher" API. This is needed in
order for the blkcipher API to be removed.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: nx - convert AES-CBC to skcipher API

Convert the PowerPC Nest (NX) implementation of AES-CBC from the
deprecated "blkcipher" API to the "skcipher" API. This is needed in
order for the blkcipher API to be removed.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: nx - convert AES-ECB to skcipher API

Convert the PowerPC Nest (NX) implementation of AES-ECB from the
deprecated "blkcipher" API to the "skcipher" API. This is needed in
order for the blkcipher API to be removed.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: nx - don't abuse blkcipher_desc to pass iv around

The NX crypto driver is using 'struct blkcipher_desc' to pass the IV
around, even for AEADs (for which it creates the struct on the stack).
This is not appropriate since this structure is part of the "blkcipher"
API, which is deprecated and will be removed.

Just pass around the IV directly instead.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: nx - no need to check return value of debugfs_create functions

When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.

Also, there is no need to store the individual debugfs file names,
especially as the whole directiry is deleted at once, so remove the
unneeded structure entirely.

Cc: "Breno Leitão" <leitao@debian.org>
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: Paulo Flabiano Smorigo <pfsmorigo@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 299

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 only this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 675 mass ave cambridge ma 02139 usa

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 15 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141902.274594435@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: nx - constify vio_device_id

vio_device_id are not supposed to change at runtime. All functions
working with vio_device_id provided by <asm/vio.h> work with
const vio_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: nx - drop duplicate header types.h

Drop duplicate header types.h from nx.c.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: nx - off by one bug in nx_of_update_msc()

The props->ap[] array is defined like this:

struct alg_props ap[NX_MAX_FC][NX_MAX_MODE][3];

So we can see that if msc->fc and msc->mode are == to NX_MAX_FC or
NX_MAX_MODE then we're off by one.

Fixes: ae0222b7289d ('powerpc/crypto: nx driver code supporting nx encryption')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: nx - Removing CTR mode from NX driver

CTR hardware implementation does not match with kernel spec causing a counter bug
where just low 8 bytes are used for counter, when should be all 16bytes.

Since we already have other counter modes working according with specs
not worth to keep CTR itself on NX.

Signed-off-by: Leonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: nx - Convert ccm to new AEAD interface

This patch converts the nx ccm and 4309 implementations to the
new AEAD interface.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: nx - Fix reentrancy bugs

This patch fixes a host of reentrancy bugs in the nx driver. The
following algorithms are affected:

* CCM
* GCM
* CTR
* XCBC
* SHA256
* SHA512

The crypto API allows a single transform to be used by multiple
threads simultaneously. For example, IPsec will use a single tfm
to process packets for a given SA. As packets may arrive on
multiple CPUs that tfm must be reentrant.

The nx driver does try to deal with this by using a spin lock.
Unfortunately only the basic AES/CBC/ECB algorithms do this in
the correct way.

The symptom of these bugs may range from the generation of incorrect
output to memory corruption.

Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: nx - Check for bogus firmware properties

The nx driver reads two crucial paramters from the firmware for
each crypto algorithm, the maximum SG list length and byte limit.
Unfortunately those two parameters may be bogus, or worse they
may be absent altogether. When this happens the algorithms will
still register successfully but will fail when used or tested.

This patch adds checks to report any firmware entries which are
found to be bogus, and avoid registering algorithms which have
bogus parameters. A warning is also printed when an algorithm
is not registered because of this as there may have been no firmware
entries for it at all.

Reported-by: Ondrej Moriš <omoris@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: nx - Convert GCM to new AEAD interface

This patch converts the nx GCM implementations to the new AEAD
interface. This is compile-tested only.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: nx - Fixing SHA update bug

Bug happens when a data size less than SHA block size is passed.
Since first attempt will be saved in buffer, second round attempt
get into two step to calculate op.inlen and op.outlen. The issue
resides in this step. A wrong value of op.inlen and outlen was being
calculated.

This patch fix this eliminate the nx_sha_build_sg_list, that is
useless in SHA's algorithm context. Instead we call nx_build_sg_list
directly and pass a previous calculated max_sg_len to it.

Signed-off-by: Leonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: nx - Fixing NX data alignment with nx_sg list

In NX we need to pass always a 16 multiple size nx_sg_list to
co processor. Trim function handle with this assuring all nx_sg_lists
are 16 multiple size, although data was not being considerated when
crop was done. It was causing an unalignment between size of the list
and data, corrupting csbcpb fields returning a -23 H_ST_PARM error, or
invalid operation.

This patch fix this recalculating how much data should be put back
in to_process variable what assures the size of sg_list will be
correct with size of the data.

Signed-off-by: Leonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: replace scatterwalk_sg_next with sg_next

Modify crypto drivers to use the generic SG helper since
both of them are equivalent and the one from crypto is redundant.

See also:
468577abe37ff7b453a9ac613e0ea155349203ae reverted in
b2ab4a57b018aafbba35bff088218f5cc3d2142e

Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: nx - Fixing the limit number of bytes to be processed

The previous limits were estimated locally in a single step
basead on bound values, however it was not correct since
when given certain scatterlist the function nx_build_sg_lists
was consuming more sg entries than allocated causing a
memory corruption and crashes.

e.g.: in the worst case we could have one sg entry for a single byte.

This patch fixes it modifying the logic of the bound limit
moving it to nx_sg_build_lists and set a correct sg_max limit,
adding a trim function to ensure the bound in sg_list. Also fixing
nx_build_sg_list NULL and untreated return in case of overflow.

Signed-off-by: Leonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: nx - add offset to nx_build_sg_lists()

This patch includes one more parameter to nx_build_sg_lists() to skip
the given number of bytes from beginning of each sg list.

This is needed in order to implement the fixes for the AES modes to make
them able to process larger chunks of data.

Reviewed-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: nx - fix concurrency issue

The NX driver uses the transformation context to store several fields
containing data related to the state of the operations in progress.
Since a single tfm can be used by different kernel threads at the same
time, we need to protect the data stored into the context.

This patch makes use of spin locks to protect the data where a race
condition can happen.

Reviewed-by: Fionnuala Gunter <fin@linux.vnet.ibm.com>
Reviewed-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: nx - fix physical addresses added to sg lists

The co-processor receives data to be hashed through scatter/gather lists
pointing to physical addresses. When a vmalloc'ed data is given, the
driver must calculate the physical address to each page of the data.

However the current version of it just calculates the physical address
once and keeps incrementing it even when a page boundary is crossed.
This patch fixes this behaviour.

Reviewed-by: Fionnuala Gunter <fin@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Reviewed-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

drivers/crypto/nx: Fixes for multiple races and issues

Fixes a race on driver init with registering algorithms where the
driver status flag wasn't being set before self testing started.

Added the cra_alignmask field for CBC and ECB modes.

Fixed a bug in GCM where AES block size was being used instead of
authsize.

Removed use of blkcipher_walk routines for scatterlist processing.
Corner cases in the code prevent us from processing an entire
scatterlist at a time and walking the buffers in block sized chunks
turns out to be unecessary anyway.

Fixed off-by-one error in saving off extra data in the sha code.

Fixed accounting error for number of bytes processed in the sha code.

Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Drivers: crypto: remove __dev* attributes.

CONFIG_HOTPLUG is going away as an option. As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Kent Yoder <key@linux.vnet.ibm.com>
Cc: Jamie Iles <jamie@jamieiles.com>
Cc: Kim Phillips <kim.phillips@freescale.com>
Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Cc: Alex Porosanu <alexandru.porosanu@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc+of: Add of node/property notification chain for adds and removes

This patch moves the notification chain for updates to the device tree
from the powerpc/pseries code to the base OF code. This makes this
functionality available to all architectures.

Additionally the notification chain is updated to allow notifications
for property add/remove/update. To make this work a pointer to a new
struct (of_prop_reconfig) is passed to the routines in the notification chain.
The of_prop_reconfig property contains a pointer to the node containing the
property and a pointer to the property itself. In the case of property
updates, the property pointer refers to the new property.

Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/crypto: Remove users of virt_to_abs() and phys_to_abs() in nx crypto driver

phys_to_abs() is a nop, don't use it.

virt_to_abs() is just a wrapper around __pa(), call __pa() directly.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/crypto: nx driver code supporting nx encryption

These routines add the base device driver code supporting the Power7+
in-Nest encryption accelerator (nx) device.

Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>