crypto: caam - Use new crypto_engine_op interface

Use the new crypto_engine_op interface where the callback is stored
in the algorithm object.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - Include internal/engine.h

Inlucde internal/engine.h because this driver uses directly
accesses attributes inside struct crypto_engine.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - fix unchecked return value error

error:
Unchecked return value (CHECKED_RETURN)
check_return: Calling sg_miter_next without checking return value

fix:
added check if(!sg_miter_next)

Fixes: 8a2a0dd35f2e ("crypto: caam - strip input zeros from RSA input buffer")
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - reduce page 0 regs access to minimum

Use job ring register map, in place of controller register map
to access page 0 registers, as access to the controller register
map is not permitted.

Signed-off-by: Horia GeantA <horia.geanta@nxp.com>
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Varun Sethi <v.sethi@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - Remove GFP_DMA and add DMA alignment padding

GFP_DMA does not guarantee that the returned memory is aligned
for DMA. It should be removed where it is superfluous.

However, kmalloc may start returning DMA-unaligned memory in future
so fix this by adding the alignment by hand.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - Set DMA alignment explicitly

This driver has been implicitly relying on kmalloc alignment
to be sufficient for DMA. This may no longer be the case with
upcoming arm64 changes.

This patch changes it to explicitly request DMA alignment from
the Crypto API.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - Use helper to set reqsize

The value of reqsize must only be changed through the helper.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - save caam memory to support crypto engine retry mechanism.

When caam queue is full (-ENOSPC), caam frees descriptor memory.
crypto-engine checks if retry support is true and h/w queue
is full(-ENOSPC), then requeue the crypto request.
During processing the requested descriptor again, caam gives below error.
(caam_jr 30902000.jr: 40000006: DECO: desc idx 0: Invalid KEY Command).

This patch adds a check to return when caam input ring is full
and retry support is true. so descriptor memory is not freed
and requeued request can be processed again.

Fixes: 2d653936eb2cf ("crypto: caam - enable crypto-engine retry mechanism")
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - disable pkc for non-E SoCs

On newer CAAM versions, not all accelerators are disabled if the SoC is
a non-E variant. While the driver checks most of the modules for
availability, there is one - PKHA - which sticks out. On non-E variants
it is still reported as available, that is the number of instances is
non-zero, but it has limited functionality. In particular it doesn't
support encryption and decryption, but just signing and verifying. This
is indicated by a bit in the PKHA_MISC field. Take this bit into account
if we are checking for availability.

This will the following error:
[ 8.167817] caam_jr 8020000.jr: 20000b0f: CCB: desc idx 11: : Invalid CHA selected.

Tested on an NXP LS1028A (non-E) SoC.

Fixes: d239b10d4ceb ("crypto: caam - add register map changes cf. Era 10")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - Provide the name of the function and provide missing descriptions

Fixes the following W=1 kernel build warning(s):

drivers/crypto/caam/caampkc.c:199: warning: expecting prototype for from a given scatterlist(). Prototype was for caam_rsa_count_leading_zeros() instead
drivers/crypto/caam/caamalg_qi2.c:87: warning: Function parameter or member 'xts_key_fallback' not described in 'caam_ctx'
drivers/crypto/caam/caamalg_qi2.c:87: warning: Function parameter or member 'fallback' not described in 'caam_ctx'

Cc: "Horia Geantă" <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

mm, treewide: rename kzfree() to kfree_sensitive()

As said by Linus:

A symmetric naming is only helpful if it implies symmetries in use.
Otherwise it's actively misleading.

In "kzalloc()", the z is meaningful and an important part of what the
caller wants.

In "kzfree()", the z is actively detrimental, because maybe in the
future we really _might_ want to use that "memfill(0xdeadbeef)" or
something. The "zero" part of the interface isn't even _relevant_.

The main reason that kzfree() exists is to clear sensitive information
that should not be leaked to other future users of the same memory
objects.

Rename kzfree() to kfree_sensitive() to follow the example of the recently
added kvfree_sensitive() and make the intention of the API more explicit.
In addition, memzero_explicit() is used to clear the memory to make sure
that it won't get optimized away by the compiler.

The renaming is done by using the command sequence:

git grep -w --name-only kzfree |\
xargs sed -i 's/kzfree/kfree_sensitive/'

followed by some editing of the kfree_sensitive() kerneldoc and adding
a kzfree backward compatibility macro in slab.h.

[akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h]
[akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more]

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Joe Perches <joe@perches.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

crypto: caam - fix use-after-free KASAN issue for RSA algorithms

Here's the KASAN report:
BUG: KASAN: use-after-free in rsa_pub_done+0x70/0xe8
Read of size 1 at addr ffff000023082014 by task swapper/0/0

CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc1-00162-gfcb90d5 #60
Hardware name: LS1046A RDB Board (DT)
Call trace:
dump_backtrace+0x0/0x260
show_stack+0x14/0x20
dump_stack+0xe8/0x144
print_address_description.isra.11+0x64/0x348
__kasan_report+0x11c/0x230
kasan_report+0xc/0x18
__asan_load1+0x5c/0x68
rsa_pub_done+0x70/0xe8
caam_jr_dequeue+0x390/0x608
tasklet_action_common.isra.13+0x1ec/0x230
tasklet_action+0x24/0x30
efi_header_end+0x1a4/0x370
irq_exit+0x114/0x128
__handle_domain_irq+0x80/0xe0
gic_handle_irq+0x50/0xa0
el1_irq+0xb8/0x180
cpuidle_enter_state+0xa4/0x490
cpuidle_enter+0x48/0x70
call_cpuidle+0x44/0x70
do_idle+0x304/0x338
cpu_startup_entry+0x24/0x40
rest_init+0xf8/0x10c
arch_call_rest_init+0xc/0x14
start_kernel+0x774/0x7b4

Allocated by task 263:
save_stack+0x24/0xb0
__kasan_kmalloc.isra.10+0xc4/0xe0
kasan_kmalloc+0xc/0x18
__kmalloc+0x178/0x2b8
rsa_edesc_alloc+0x2cc/0xe10
caam_rsa_enc+0x9c/0x5f0
test_akcipher_one+0x78c/0x968
alg_test_akcipher+0x78/0xf8
alg_test.part.44+0x114/0x4a0
alg_test+0x1c/0x60
cryptomgr_test+0x34/0x58
kthread+0x1b8/0x1c0
ret_from_fork+0x10/0x18

Freed by task 0:
save_stack+0x24/0xb0
__kasan_slab_free+0x10c/0x188
kasan_slab_free+0x10/0x18
kfree+0x7c/0x298
rsa_pub_done+0x68/0xe8
caam_jr_dequeue+0x390/0x608
tasklet_action_common.isra.13+0x1ec/0x230
tasklet_action+0x24/0x30
efi_header_end+0x1a4/0x370

The buggy address belongs to the object at ffff000023082000
which belongs to the cache dma-kmalloc-256 of size 256
The buggy address is located 20 bytes inside of
256-byte region [ffff000023082000, ffff000023082100)
The buggy address belongs to the page:
page:fffffe00006c2080 refcount:1 mapcount:0 mapping:ffff00093200c200 index:0x0 compound_mapcount: 0
flags: 0xffff00000010200(slab|head)
raw: 0ffff00000010200 dead000000000100 dead000000000122 ffff00093200c200
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff000023081f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff000023081f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff000023082000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff000023082080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff000023082100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc

Fixes: bf53795025a2 ("crypto: caam - add crypto_engine support for RSA algorithms")
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - add crypto_engine support for RSA algorithms

Add crypto_engine support for RSA algorithms, to make use of
the engine queue.
The requests, with backlog flag, will be listed into crypto-engine
queue and processed by CAAM when free. In case the queue is empty,
the request is directly sent to CAAM.
Only the backlog request are sent to crypto-engine since the others
can be handled by CAAM, if free, especially since JR has up to 1024
entries (more than the 10 entries from crypto-engine).

Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - change return code in caam_jr_enqueue function

Based on commit 6b80ea389a0b ("crypto: change transient busy return code to -ENOSPC"),
change the return code of caam_jr_enqueue function to -EINPROGRESS, in
case of success, -ENOSPC in case the CAAM is busy (has no space left
in job ring queue), -EIO if it cannot map the caller's descriptor.

Update, also, the cases for resource-freeing for each algorithm type.

This is done for later use, on backlogging support in CAAM.

Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - refactor RSA private key _done callbacks

Create a common rsa_priv_f_done function, which based
on private key form calls the specific unmap function.

Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - use mapped_{src,dst}_nents for descriptor

The mapped_{src,dst}_nents _returned_ from the dma_map_sg
call (which could be less than src/dst_nents) have to be
used to generate the job descriptors.

Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - select DMA address size at runtime

i.MX8 mScale SoC still use 32-bit addresses in its CAAM implmentation,
so we can't rely on sizeof(dma_addr_t) to detemine CAAM pointer
size. Convert the code to query CTPR and MCFGR for that during driver
probing.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - unregister algorithm only if the registration succeeded

To know if a registration succeeded added a new struct,
caam_akcipher_alg, that keeps, also, the registration status.
This status is updated in caam_pkc_init and verified in
caam_pkc_exit to unregister an algorithm.

Fixes: 1b46c90c8e00 ("crypto: caam - convert top level drivers to libraries")
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - execute module exit point only if necessary

Commit 1b46c90c8e00 ("crypto: caam - convert top level drivers to libraries")
changed entry and exit points behavior for caamalg,
caamalg_qi, caamalg_qi2, caamhash, caampkc, caamrng.

For example, previously caam_pkc_init() and caam_pkc_exit() were
module entry/exit points. This means that if an error would happen
in caam_pkc_init(), then caam_pkc_exit() wouldn't have been called.
After the mentioned commit, caam_pkc_init() and caam_pkc_exit()
are manually called - from jr.c. caam_pkc_exit() is called
unconditionally, even if caam_pkc_init() failed.

Added a global variable to keep the status of the algorithm
registration and free of resources.
The exit point of caampkc/caamrng module is executed only if the
registration was successful. Therefore we avoid double free of
resources in case the algorithm registration failed.

Fixes: 1b46c90c8e00 ("crypto: caam - convert top level drivers to libraries")
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - fix return code in completion callbacks

Modify drive to provide a valid errno (and not the HW error ID)
to the user, via completion callbacks.

A "valid errno" is currently not explicitly mentioned in the docs,
however the error code is expected to match the one returned by the
generic SW implementation.

Note: in most error cases caam/qi and caam/qi2 returned -EIO; align all
caam drivers to return -EINVAL.

While here, ratelimit prints triggered by fuzz testing, such that
console is not flooded.

Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: drivers - Use kmemdup rather than duplicating its implementation

kmemdup is introduced to duplicate a region of memory in a neat way.
Rather than kmalloc/kzalloc + memcpy, which the programmer needs to
write the size twice (sometimes lead to mistakes), kmemdup improves
readability, leads to smaller code and also reduce the chances of mistakes.
Suggestion to use kmemdup rather than using kmalloc/kzalloc + memcpy.

Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - use len instead of nents for bulding HW S/G table

Currently, conversion of SW S/G table into HW S/G layout relies on
nents returned by sg_nents_for_len(sg, len).
However this leaves the possibility of HW S/G referencing more data
then needed: since buffer length in HW S/G entries is filled using
sg_dma_len(sg), the last entry in HW S/G table might have a length
that is bigger than needed for the crypto request.

This way of S/G table conversion is fine, unless after converting a table
more entries have to be appended to the HW S/G table.
In this case, crypto engine would access data from the S/G entry having
the incorrect length, instead of advancing in the S/G table.
This situation doesn't exist, but the upcoming implementation of
IV update for skcipher algorithms needs to add a S/G entry after
req->dst S/G (corresponding to output IV).

Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - strip input without changing crypto request

For rsa and pkcs1pad, CAAM expects an input of modulus size.
For this we strip the leading zeros in case the size is more than modulus.
This commit avoids modifying the crypto request while stripping zeros from
input, to comply with the crypto API requirement. This is done by adding
a fixup input pointer and length.

Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - fix pkcs1pad(rsa-caam, sha256) failure because of invalid input

The problem is with the input data size sent to CAAM for encrypt/decrypt.
Pkcs1pad is failing due to pkcs1 padding done in SW starting with0x01
instead of 0x00 0x01.
CAAM expects an input of modulus size. For this we strip the leading
zeros in case the size is more than modulus or pad the input with zeros
until the modulus size is reached.

Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - convert top level drivers to libraries

Currently we allow top level code, i.e. that which sits between the
low level (HW-specific) drivers and crypto API, to be built as several
drivers: caamalg, caamhash, caam_pkc, caamrng, caamalg_qi.

There is no advantage in this, more it interferes with adding support
for deferred probing (there are no corresponding devices and thus
no bus).

Convert these drivers and call init() / exit() manually at the right
time.
Move algorithms initialization at JR probe / remove time:
-the first probed JR registers the crypto algs
-the last removed JR unregisters the crypto algs

Note: caam_qi_init() is called before JR platform devices creation
(of_populate_bus()), such that QI interface is initialized when
the caam/qi algorithms are registered in the JR driver (by calling
caam_qi_algapi_init().

While here, fix the Kconfig entries under CRYPTO_DEV_FSL_CAAM_JR
to be aligned.

Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - fix S/G table passing page boundary

According to CAAM RM:
-crypto engine reads 4 S/G entries (64 bytes) at a time,
even if the S/G table has fewer entries
-it's the responsibility of the user / programmer to make sure
this HW behaviour has no side effect

The drivers do not take care of this currently, leading to IOMMU faults
when the S/G table ends close to a page boundary - since only one page
is DMA mapped, while CAAM's DMA engine accesses two pages.

Fix this by rounding up the number of allocated S/G table entries
to a multiple of 4.
Note that in case of two *contiguous* S/G tables, only the last table
might needs extra entries.

Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: rsa - unimplement sign/verify for raw RSA backends

In preparation for new akcipher verify call remove sign/verify callbacks
from RSA backends and make PKCS1 driver call encrypt/decrypt instead.

This also complies with the well-known idea that raw RSA should never be
used for sign/verify. It only should be used with proper padding scheme
such as PKCS1 driver provides.

Cc: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Cc: qat-linux@intel.com
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gary Hook <gary.hook@amd.com>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - add missing put_device() call

The of_find_device_by_node() takes a reference to the underlying device
structure, we should release that reference.

Fixes: 35af64038623 ("crypto: caam - Check for CAAM block presence before registering with crypto layer")
Fixes: b189817cf789 ("crypto: caam/qi - add ablkcipher and authenc algorithms")
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Wen Yang <yellowriver2010@hotmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - add register map changes cf. Era 10

Era 10 changes the register map.

The updates that affect the drivers:
-new version registers are added
-DBG_DBG[deco_state] field is moved to a new register -
DBG_EXEC[19:16] @ 8_0E3Ch.

Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - add SPDX license identifier to all files

Previously, a tree-wide change added SPDX license identifiers to
files lacking licensing information:
b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license")

To be consistent update the rest of the files:
-files with license specified by means of MODULE_LICENSE()
-files with complete license text
-Kconfig

Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - fix DMA mapping direction for RSA forms 2 & 3

Crypto engine needs some temporary locations in external memory for
running RSA decrypt forms 2 and 3 (CRT).
These are named "tmp1" and "tmp2" in the PDB.

Update DMA mapping direction of tmp1 and tmp2 from TO_DEVICE to
BIDIRECTIONAL, since engine needs r/w access.

Cc: <stable@vger.kernel.org> # 4.13+
Fixes: 52e26d77b8b3 ("crypto: caam - add support for RSA key form 2")
Fixes: 4a651b122adb ("crypto: caam - add support for RSA key form 3")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - fix size of RSA prime factor q

Fix a typo where size of RSA prime factor q is using the size of
prime factor p.

Cc: <stable@vger.kernel.org> # 4.13+
Fixes: 52e26d77b8b3 ("crypto: caam - add support for RSA key form 2")
Fixes: 4a651b122adb ("crypto: caam - add support for RSA key form 3")
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam: - Use kmemdup() function

Use kmemdup() rather than duplicating its implementation.

By usign kmemdup() we can also get rid of the 'val' variable.

Detected with Coccinelle script.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - strip input zeros from RSA input buffer

Sometimes the provided RSA input buffer provided is not stripped
of leading zeros. This could cause its size to be bigger than that
of the modulus, making the HW complain:

caam_jr 2142000.jr1: 40000789: DECO: desc idx 7:
Protocol Size Error - A protocol has seen an error in size. When
running RSA, pdb size N < (size of F) when no formatting is used; or
pdb size N < (F + 11) when formatting is used.

Fix the problem by stripping off the leading zero from input data
before feeding it to the CAAM accelerator.

Fixes: 8c419778ab57e ("crypto: caam - add support for RSA algorithm")
Cc: <stable@vger.kernel.org> # 4.8+
Reported-by: Martin Townsend <mtownsend1973@gmail.com>
Link: https://lkml.kernel.org/r/CABatt_ytYORYKtApcB4izhNanEKkGFi9XAQMjHi_n-8YWoCRiw@mail.gmail.com
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - fix gfp allocation flags (part II)

This is the 2nd part of fixing the usage of GFP_KERNEL for memory
allocations, taking care off all the places that haven't caused a real
problem / failure.
Again, the issue being fixed is that GFP_KERNEL should be used only when
MAY_SLEEP flag is set, i.e. MAY_BACKLOG flag usage is orthogonal.

Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caampkc - comply with crypto_akcipher_maxsize()

crypto_akcipher_maxsize() asks for the output buffer size without
caring for errors. It allways assume that will be called after
a valid setkey. Comply with it and return what he wants.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - add support for RSA key form 3

CAAM RSA private key may have either of three representations.

1. The first representation consists of the pair (n, d), where the
components have the following meanings:
n the RSA modulus
d the RSA private exponent

2. The second representation consists of the triplet (p, q, d), where
the
components have the following meanings:
p the first prime factor of the RSA modulus n
q the second prime factor of the RSA modulus n
d the RSA private exponent

3. The third representation consists of the quintuple (p, q, dP, dQ,
qInv),
where the components have the following meanings:
p the first prime factor of the RSA modulus n
q the second prime factor of the RSA modulus n
dP the first factors's CRT exponent
dQ the second factors's CRT exponent
qInv the (first) CRT coefficient

The benefit of using the third or the second key form is lower
computational cost for the decryption and signature operations.

This patch adds support for the third RSA private key
representations and extends caampkc to use the fastest key when all
related components are present in the private key.

Signed-off-by: Tudor Ambarus <tudor-dan.ambarus@nxp.com>
Signed-off-by: Radu Alexe <radu.alexe@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - add support for RSA key form 2

CAAM RSA private key may have either of three representations.

1. The first representation consists of the pair (n, d), where the
components have the following meanings:
n the RSA modulus
d the RSA private exponent

2. The second representation consists of the triplet (p, q, d), where
the
components have the following meanings:
p the first prime factor of the RSA modulus n
q the second prime factor of the RSA modulus n
d the RSA private exponent

3. The third representation consists of the quintuple (p, q, dP, dQ,
qInv),
where the components have the following meanings:
p the first prime factor of the RSA modulus n
q the second prime factor of the RSA modulus n
dP the first factors's CRT exponent
dQ the second factors's CRT exponent
qInv the (first) CRT coefficient

The benefit of using the third or the second key form is lower
computational cost for the decryption and signature operations.

This patch adds support for the second RSA private key
representation.

Signed-off-by: Tudor Ambarus <tudor-dan.ambarus@nxp.com>
Signed-off-by: Radu Alexe <radu.alexe@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - incapsulate dropping leading zeros into function

This function will be used into further patches.

Signed-off-by: Radu Alexe <radu.alexe@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - avoid kzalloc(0) in caam_read_raw_data

The function returns NULL if buf is composed only of zeros.

Signed-off-by: Tudor Ambarus <tudor-dan.ambarus@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - fix invalid dereference in caam_rsa_init_tfm()

In case caam_jr_alloc() fails, ctx->dev carries the error code,
thus accessing it with dev_err() is incorrect.

Cc: <stable@vger.kernel.org> # 4.8+
Fixes: 8c419778ab57e ("crypto: caam - add support for RSA algorithm")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - fix sparse warnings

Fix the following sparse warning (note that endianness issues
are not not addressed in current patch):

drivers/crypto/caam/ctrl.c:388:24: warning: incorrect type in argument 1 (different address spaces)
drivers/crypto/caam/ctrl.c:388:24: expected void [noderef] <asn:2>*reg
drivers/crypto/caam/ctrl.c:388:24: got unsigned int *<noident>
drivers/crypto/caam/ctrl.c:390:24: warning: incorrect type in argument 1 (different address spaces)
drivers/crypto/caam/ctrl.c:390:24: expected void [noderef] <asn:2>*reg
drivers/crypto/caam/ctrl.c:390:24: got unsigned int *<noident>
drivers/crypto/caam/ctrl.c:548:24: warning: incorrect type in assignment (different address spaces)
drivers/crypto/caam/ctrl.c:548:24: expected struct caam_ctrl [noderef] <asn:2>*ctrl
drivers/crypto/caam/ctrl.c:548:24: got struct caam_ctrl *<noident>
drivers/crypto/caam/ctrl.c:550:30: warning: cast removes address space of expression
drivers/crypto/caam/ctrl.c:549:26: warning: incorrect type in assignment (different address spaces)
drivers/crypto/caam/ctrl.c:549:26: expected struct caam_assurance [noderef] <asn:2>*assure
drivers/crypto/caam/ctrl.c:549:26: got struct caam_assurance *<noident>
drivers/crypto/caam/ctrl.c:554:28: warning: cast removes address space of expression
drivers/crypto/caam/ctrl.c:553:24: warning: incorrect type in assignment (different address spaces)
drivers/crypto/caam/ctrl.c:553:24: expected struct caam_deco [noderef] <asn:2>*deco
drivers/crypto/caam/ctrl.c:553:24: got struct caam_deco *<noident>
drivers/crypto/caam/ctrl.c:634:48: warning: cast removes address space of expression
drivers/crypto/caam/ctrl.c:633:44: warning: incorrect type in assignment (different address spaces)
drivers/crypto/caam/ctrl.c:633:44: expected struct caam_job_ring [noderef] <asn:2>*<noident>
drivers/crypto/caam/ctrl.c:633:44: got struct caam_job_ring *<noident>
drivers/crypto/caam/ctrl.c:648:34: warning: cast removes address space of expression
drivers/crypto/caam/ctrl.c:647:30: warning: incorrect type in assignment (different address spaces)
drivers/crypto/caam/ctrl.c:647:30: expected struct caam_queue_if [noderef] <asn:2>*qi
drivers/crypto/caam/ctrl.c:647:30: got struct caam_queue_if *<noident>
drivers/crypto/caam/ctrl.c:806:37: warning: incorrect type in assignment (different address spaces)
drivers/crypto/caam/ctrl.c:806:37: expected void *data
drivers/crypto/caam/ctrl.c:806:37: got unsigned int [noderef] <asn:2>*
drivers/crypto/caam/ctrl.c:814:38: warning: incorrect type in assignment (different address spaces)
drivers/crypto/caam/ctrl.c:814:38: expected void *data
drivers/crypto/caam/ctrl.c:814:38: got unsigned int [noderef] <asn:2>*
drivers/crypto/caam/ctrl.c:822:38: warning: incorrect type in assignment (different address spaces)
drivers/crypto/caam/ctrl.c:822:38: expected void *data
drivers/crypto/caam/ctrl.c:822:38: got unsigned int [noderef] <asn:2>*
drivers/crypto/caam/jr.c:492:23: warning: incorrect type in assignment (different address spaces)
drivers/crypto/caam/jr.c:492:23: expected struct caam_job_ring [noderef] <asn:2>*rregs
drivers/crypto/caam/jr.c:492:23: got struct caam_job_ring *<noident>
drivers/crypto/caam/caampkc.c:398:35: warning: Using plain integer as NULL pointer
drivers/crypto/caam/caampkc.c:444:35: warning: Using plain integer as NULL pointer

Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - add support for RSA algorithm

Add RSA support to caam driver.

Initial author is Yashpal Dutta <yashpal.dutta@freescale.com>.

Signed-off-by: Tudor Ambarus <tudor-dan.ambarus@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>