clk: imx: remove clk_count of imx_register_uart_clocks

The clk count has been get with of_clk_get_parent_count, there is
no need to pass clk_count from users.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230104110032.1220721-4-peng.fan@oss.nxp.com

clk: imx: rename imx_obtain_fixed_clk_hw() to imx_get_clk_hw_by_name()

The imx_obtain_fixed_clk_hw name was wrong and misleading. Renaming it
to imx_get_clk_hw_by_name clarifies the purpose of the function, and
will allow it to be used not only for fixed rate clocks but also in
wider contexts.

No functional changes intended.

The replacements were made with the following command:

grep -rl 'imx_obtain_fixed_clk_hw' ./ | \
xargs sed -i 's/imx_obtain_fixed_clk_hw/imx_get_clk_hw_by_name/g'

Tested on a BSH SystemMaster (SMM) S2 board.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221113180839.1625832-1-dario.binacchi@amarulasolutions.com

clk: imx: Fix reparenting of UARTs not associated with stdout

Most if not all i.MX SoC's call a function which enables all UARTS.
This is a problem for users who need to re-parent the clock source,
because any attempt to change the parent results in an busy error
due to the fact that the clocks have been enabled already.

clk: failed to reparent uart1 to sys_pll1_80m: -16

Instead of pre-initializing all UARTS, scan the device tree to see
which UART clocks are associated to stdout, and only enable those
UART clocks if it's needed early. This will move initialization of
the remaining clocks until after the parenting of the clocks.

When the clocks are shutdown, this mechanism will also disable any
clocks that were pre-initialized.

Fixes: 9461f7b33d11c ("clk: fix CLK_SET_RATE_GATE with clock rate protection")
Suggested-by: Aisheng Dong <aisheng.dong@nxp.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>

clk: imx: imx6sll: use imx_obtain_fixed_clk_hw to simplify code

imx_obtain_fixed_clk_hw could be used to simplify code to replace
__clk_get_hw(of_clk_get_by_name(node, "name"))

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

clk: consoldiate the __clk_get_hw() declarations

Without this we were getting errors like:

In file included from drivers/clk/clkdev.c:22:0:
drivers/clk/clk.h:36:23: error: static declaration of '__clk_get_hw' follows non-static declaration
include/linux/clk-provider.h:808:16: note: previous declaration of '__clk_get_hw' was here

Fixes: 59fcdce425b7 ("clk: Remove ifdef for COMMON_CLK in clk-provider.h")
fixes: 73e0e496afda ("clkdev: Always allocate a struct clk and call __clk_get() w/ CCF")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: imx6sll: Switch to clk_hw based API

Switch the entire clk-imx6sll driver to clk_hw based API.
This allows us to move closer to a clear split between
consumer and provider clk APIs.

Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

clk: imx: keep the mmdc p1 ipg clock always on on 6sx/ul/ull/sll

The MMDC_P1_IPG clock need to be on always on to make sure
the MMDC register can be accessed successfully.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

clk: imx: Use imx_mmdc_mask_handshake() API for masking MMDC channel

Use imx_mmdc_mask_handshake() API instead of programming CCM
register directly in each platform to mask unused MMDC channel's
handshake.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

clk: imx: keep uart clock on during system boot

Keep uart clocks enabled when earlyprintk or
earlycon is active.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: imx6sll: Fix mispelling uart4_serial as serail

This looks like a copy-paste error. This string is not referenced
anywhere so it's safe to rename it.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: imx6sll: add mmdc1 ipg clock

i.MX6SLL has MMDC1 ipg clock in CCM CCGR, add it into
clock tree for clock management.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: imx6sll: fix missing of_node_put()

of_find_compatible_node() is returning a device node with refcount
incremented and must be explicitly decremented after the last use
which is right after the us in of_iomap() here.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: 4a5f720b6542 ("clk: imx: add clock driver for imx6sll")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: imx6sll: add GPIO LPCGs

According to Reference Manual Rev.0, 06/2017, there are GPIO LPCGs
defined in CCM CCGRs, add them into clock tree.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: imx: add clock driver for imx6sll

Add clk driver support for imx6sll.

Signed-off-by: Bai Ping <ping.bai@nxp.com>
Acked-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>