clk: at91: clk-utmi: add support for parent_hw

Add support for parent_hw in utmi clock drivers.
With this parent-child relation is described with pointers rather
than strings making registration a bit faster.

All the SoC based drivers that rely on clk-utmi were adapted
to the new API change. The switch itself for SoCs will be done
in subsequent patches.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230615093227.576102-8-claudiu.beznea@microchip.com

clk: at91: clk-system: add support for parent_hw

Add support for parent_hw in system clock drivers.
With this parent-child relation is described with pointers rather
than strings making registration a bit faster.

All the SoC based drivers that rely on clk-system were adapted
to the new API change. The switch itself for SoCs will be done
in subsequent patches.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230615093227.576102-7-claudiu.beznea@microchip.com

clk: at91: clk-programmable: add support for parent_hw

Add support for parent_hw in programmable clock driver.
With this parent-child relation is described with pointers rather
than strings making registration a bit faster.

All the SoC based drivers that rely on clk-programmable were adapted
to the new API change. The switch itself for SoCs will be done
in subsequent patches.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230615093227.576102-6-claudiu.beznea@microchip.com

clk: at91: clk-peripheral: add support for parent_hw

Add support for parent_hw in peripheral clock drivers.
With this parent-child relation is described with pointers rather
than strings making registration a bit faster.

All the SoC based drivers that rely on clk-peripheral were adapted
to the new API change. The switch itself for SoCs will be done
in subsequent patches.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230615093227.576102-5-claudiu.beznea@microchip.com

clk: at91: clk-master: add support for parent_hw

Add support for parent_hw in master clock drivers.
With this parent-child relation is described with pointers rather
than strings making registration a bit faster.

All the SoC based drivers that rely on clk-master were adapted
to the new API change. The switch itself for SoCs will be done
in subsequent patches.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230615093227.576102-4-claudiu.beznea@microchip.com

clk: at91: clk-main: add support for parent_data/parent_hw

Add support for parent_data and parent_hw in main oscillator clock drivers.
With this parent-child relations are described with pointers rather
than strings making registration a bit faster.

All the SoC based drivers that rely on clk-main were adapted
to the new API change. The switch itself for SoCs will be done
in subsequent patches.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230615093227.576102-2-claudiu.beznea@microchip.com

clk: at91: mark ddr clocks as critical

Mark DDR clocks as critical for AT91 devices. These clocks are enabled
by bootloader when initializing DDR and needs to stay enabled. Up to
this patch the DDR clocks were requested from drivers/memory/atmel-sdramc.c
which does only clock request and enable. There is no need to have
a separate driver just for this, thus the atmel-sdramc.c will be deleted
in a subsequent patch.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221208114515.35179-2-claudiu.beznea@microchip.com

clk: at91: clk-master: remove dead code

Commit facb87ad7560 ("clk: at91: sama7g5: remove prescaler part of master
clock") removed the master clock's prescaler from clock tree of SAMA7G5
as it has been discovered that there is a hardware bug when trying to
change it at run-time (bug is described in description of
commit facb87ad7560 ("clk: at91: sama7g5: remove prescaler part of master
clock")). This was previously changed at CPUFreq driver request. Thus, with
commit facb87ad7560 ("clk: at91: sama7g5: remove prescaler part of master
clock") there is no need of code that handles run-time changes of master
clock's prescaler, thus remove this code.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220203110202.18329-1-claudiu.beznea@microchip.com

clk: at91: clk-master: add notifier for divider

SAMA7G5 supports DVFS by changing cpuck. On SAMA7G5 mck0 shares the same
parent with cpuck as seen in the following clock tree:

+----------> cpuck
|
FRAC PLL ---> DIV PLL -+-> DIV ---> mck0

mck0 could go b/w 32KHz and 200MHz on SAMA7G5. To avoid mck0 overclocking
while changing FRAC PLL or DIV PLL the commit implements a notifier for
mck0 which applies a safe divider to register (maximum value of the divider
which is 5) on PRE_RATE_CHANGE events (such that changes on PLL to not
overclock mck0) and sets the maximum allowed rate on POST_RATE_CHANGE
events.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20211011112719.3951784-13-claudiu.beznea@microchip.com
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: at91: Fix the declaration of the clocks

These are all "early clocks" that require initialization just at
of_clk_init() time. Use CLK_OF_DECLARE() to declare them.

This also fixes a problem that was spotted when fw_devlink was
set to 'on' by default: the boards failed to boot. The reason is
that CLK_OF_DECLARE_DRIVER() clears the OF_POPULATED and causes
the consumers of the clock to be postponed by fw_devlink until
the second initialization routine of the clock has been completed.
One of the consumers of the clock is the timer, which is used as a
clocksource, and needs the clock initialized early. Postponing the
timers caused the fail at boot.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20210203154332.470587-1-tudor.ambarus@microchip.com
Acked-by: Saravana Kannan <saravanak@google.com>
Tested-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: at91: clk-master: re-factor master clock

Re-factor master clock driver by splitting it into 2 clocks: prescaller
and divider clocks. Based on registered clock flags the prescaler's rate
could be changed at runtime. This is necessary for platforms supporting
DVFS (e.g. SAMA7G5) where master clock could be changed at run-time.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1605800597-16720-11-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: at91: clk-programmable: add mux_table option

Add mux table option. This is necessary for IP versions that has
gaps in the range of available clock sources (e.g. SAMA7G5).

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1595403506-8209-15-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: at91: clk-peripheral: add support for changeable parent rate

Some peripheral clocks on SAMA7G5 supports requesting parent to change
its rate (image related clocks: csi, csi2dc, isc). Add support
so that if registered with this option the clock rate to be
requested from parent.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1595403506-8209-14-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: at91: allow setting all PMC clock parents via DT

We need to have clocks accessible via phandle to select them
as peripheral clock parent using assigned-clock-parents in DT.
Add support for PLLACK/PLLBCK/AUDIOPLLCK clocks where available.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lkml.kernel.org/r/fa39cc10dab8341ea4bc2b7152be9217b2cd34a5.1588630999.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: at91: allow setting PCKx parent via DT

This exposes PROGx clocks for use in assigned-clocks DeviceTree property
for selecting PCKx parent clock.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lkml.kernel.org/r/0054532c00163ddf405dad658b32f0d7d97fcc8e.1588630999.git.mirq-linux@rere.qmqm.pl
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: at91: optimize pmc data allocation

Alloc whole data structure in one block. This makes the code shorter,
more efficient and easier to extend in following patch.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lkml.kernel.org/r/fc6f6d67b8cee0beace4a9d9cca7431e5efa769d.1588630999.git.mirq-linux@rere.qmqm.pl
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: at91: fix possible deadlock

Lockdep warns about a possible circular locking dependency because using
syscon_node_to_regmap() will make the created regmap get and enable the
first clock it can parse from the device tree. This clock is not needed to
access the registers and should not be enabled at that time.

Use the recently introduced device_node_to_regmap to solve that as it looks
up the regmap in the same list but doesn't care about the clocks.

Reported-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lkml.kernel.org/r/20191128102531.817549-1-alexandre.belloni@bootlin.com
Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: at91: Mark struct clk_range as const

It's just some static data that doesn't get changed after being used.
Mark it const everywhere.

Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: at91: allow configuring peripheral PCR layout

The PCR register actually changed layout for each SoC. By chance, this
didn't have impact on sama5d[2-4] support but since sama5d3, PID is seven
bits wide and sama5d4 and sama5d2 don't have DIV.

For the DT backward compatibility, keep the layout as is.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: at91: fix masterck name

The master clock is actually named masterck earlier in the driver. Having
"mck" in the parent list means that it can never be selected.

Fixes: 1eabdc2f9dd8 ("clk: at91: add at91sam9x5 PMCs driver")
Fixes: a2038077de9a ("clk: at91: add sama5d2 PMC driver")
Fixes: 084b696bb509 ("clk: at91: add sama5d4 pmc driver")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: <stable@vger.kernel.org> # v4.20+
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: at91: fix at91sam9x5 peripheral clock number

nck() looks at the last id in an array and unfortunately,
at91sam9x35_periphck has a sentinel, hence the id is 0 and the calculated
number of peripheral clocks is 1 instead of a maximum of 31.

Fixes: 1eabdc2f9dd8 ("clk: at91: add at91sam9x5 PMCs driver")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: <stable@vger.kernel.org> # v4.20+
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: at91: add at91sam9x5 PMCs driver

Add a driver for the PMC clocks of the at91sam9x5 SoCs

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
[sboyd@kernel.org: Make i signed to fix signedness bug]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>