hwrng: histb - Move driver to drivers/char/hw_random/histb-rng.c

Move to drivers/char/hw_random since histb-(t)rng does not provide
cryptography pseudo rng.

histb-rng is pretty like hisi-rng, but after investigation, we confirm
there is no RNG_PHY_SEED register on histb-rng so a separate driver is
needed.

Still we rename relevant function names to match those in hisi-rng.

Link: https://lore.kernel.org/r/20230401164448.1393336-1-mmyangfl@gmail.com
Signed-off-by: David Yang <mmyangfl@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: starfive - Add TRNG driver for StarFive SoC

This adds driver support for the hardware random number generator in
Starfive SoCs and adds StarFive TRNG entry to MAINTAINERS.

Co-developed-by: Jenny Zhang <jenny.zhang@starfivetech.com>
Signed-off-by: Jenny Zhang <jenny.zhang@starfivetech.com>
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: mpfs - add polarfire soc hwrng support

Add a driver to access the hardware random number generator on the
Polarfire SoC. The hwrng can only be accessed via the system controller,
so use the mailbox interface the system controller exposes to access the
hwrng.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

MIPS: TXX9: Remove TX4939 SoC support

After removal of RBTX4939 board support remove code for the TX4939 SoC.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>

hwrng: cn10k - Add random number generator support

CN10K series of silicons support true random number
generators. This patch adds support for the same. Also
supports entropy health status checking.

Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: Joseph Longever <jlongever@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: Add Arm SMCCC TRNG based driver

The "Arm True Random Number Generator Firmware Interface"[1] provides
an SMCCC based interface to a true hardware random number generator.
So far we are using that in arch_get_random_seed(), but it might be
useful to expose the entropy through the /dev/hwrng device as well. This
allows to assess the quality of the implementation, by using "rngtest"
from the rng-tools package, for example.

Add a simple platform driver implementing the hw_random interface.
The corresponding platform device is created by the SMCCC core code,
we just match it here by name and provide a module alias.

Since the firmware takes care about serialisation, this can happily
coexist with the arch_get_random_seed() bits.

[1] https://developer.arm.com/documentation/den0098/latest/

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: hisi - remove HiSilicon TRNG driver

Driver of HiSilicon true random number generator(TRNG)
is removed from 'drivers/char/hw_random'.

Both 'Kunpeng 920' and 'Kunpeng 930' chips have TRNG,
however, PRNG is only supported by 'Kunpeng 930'.
So, this driver is moved to 'drivers/crypto/hisilicon/trng/'
in the next to enable the two's TRNG better.

Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: ingenic - Add hardware TRNG for Ingenic X1830

Add X1830 SoC digital true random number generator driver.

Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com>
Co-developed-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com>
Signed-off-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: xiphera-trng: add support for XIP8001B hwrng

Xiphera XIP8001B is an FPGA-based True Random Number Generator
Intellectual Property (IP) Core which can be instantiated in
multiple FPGA families. This driver adds Linux support for it through
the hwrng interface.

Signed-off-by: Atte Tommiska <atte.tommiska@xiphera.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: ingenic - Add hardware RNG for Ingenic JZ4780 and X1000

Add JZ4780 SoC and X1000 SoC random number generator driver,
based on PrasannaKumar Muralidharan's JZ4780 RNG driver.

Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com>
Tested-by: Mathieu Malaterre <malat@debian.org>
Suggested-by: Jeffrey Walton <noloader@gmail.com>
Signed-off-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: ba431 - add support for BA431 hwrng

Silex insight BA431 is an IP designed to generate random numbers that
can be integrated in various FPGA.
This driver adds support for it through the hwrng interface.

This driver is used in Silex Insight Viper OEM boards.

Signed-off-by: Olivier Sobrie <olivier.sobrie@silexinsight.com>
Signed-off-by: Waleed Ziad <waleed94ziad@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: cctrng - introduce Arm CryptoCell driver

Introduce low level Arm CryptoCell TRNG HW support.

Signed-off-by: Hadar Gat <hadar.gat@arm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: hisi - add HiSilicon TRNG driver support

This series adds HiSilicon true random number generator(TRNG)
driver in hw_random subsystem.

Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: npcm - add NPCM RNG driver

Add Nuvoton NPCM BMC Random Number Generator(RNG) driver.

Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: add OP-TEE based rng driver

On ARM SoC's with TrustZone enabled, peripherals like entropy sources
might not be accessible to normal world (linux in this case) and rather
accessible to secure world (OP-TEE in this case) only. So this driver
aims to provides a generic interface to OP-TEE based random number
generator service.

This driver registers on TEE bus to interact with OP-TEE based rng
device/service.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>

hwrng: msm - remove msm hw_random driver

This driver is for a psedo-rng so should not be added in hwrng.
Remove it so that it's replacement can be added.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: ks-sa - add hw_random driver

Keystone Security Accelerator module has a hardware random generator
sub-module. This commit adds the driver for this sub-module.

Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
[t-kristo@ti.com: dropped one unnecessary dev_err message]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

tpm: Move Linux RNG connection to hwrng

The tpm-rng.c approach is completely inconsistent with how the kernel
handles hotplug. Instead manage a hwrng device for each TPM. This will
cause the kernel to read entropy from the TPM when it is plugged in, and
allow access to the TPM rng via /dev/hwrng.

Signed-off-by: Jason Gunthorpe <jgg@ziepe.ca>
Tested-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

hwrng: exynos - add Samsung Exynos True RNG driver

Add support for True Random Number Generator found in Samsung Exynos
5250+ SoCs.

Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: bcm63xx - Remove since bcm2835-rng takes over

bcm2835-rng is now capable of supporting the BCM63xx hardware, so remove
the driver which duplicates the same functionality.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwrng: mx-rngc - add a driver for Freescale RNGC

The driver is ported from Freescale's Linux git and can be
found in the

vendor/freescale/imx_2.6.35_maintain

branch.

The driver supports both RNG version C that's part of some Freescale
i.MX3 SoCs and version B that is available on i.MX2x chipsets.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

s390/trng: Introduce s390 TRNG device driver.

This patch introduces a new device driver s390-trng for the
s390 platform which exploits the new PRNO TRNG cpacf
subfunction. The true-random-number-generator is accessible
from userspace, by default visible as /dev/trng. The driver
also registers at the kernel build-in hwrng API to feed the
hwrng with fresh entropy data. This generic device driver
for hardware random data is visible from userspace as
/dev/hwrng.

Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

hwrng: mtk - Add driver for hardware random generator on MT7623 SoC

This patch adds support for hardware random generator on MT7623 SoC
and should also work on other similar Mediatek SoCs. Currently,
the driver is already tested successfully with rng-tools.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: exynos - Add new Exynos RNG driver

Replace existing hw_ranndom/exynos-rng driver with a new, reworked one.
This is a driver for pseudo random number generator block which on
Exynos4 chipsets must be seeded with some value. On newer Exynos5420
chipsets it might seed itself from true random number generator block
but this is not implemented yet.

New driver is a complete rework to use the crypto ALGAPI instead of
hw_random API. Rationale for the change:
1. hw_random interface is for true RNG devices.
2. The old driver was seeding itself with jiffies which is not a
reliable source for randomness.
3. Device generates five random 32-bit numbers in each pass but old
driver was returning only one 32-bit number thus its performance was
reduced.

Compatibility with DeviceTree bindings is preserved.

New driver does not use runtime power management but manually enables
and disables the clock when needed. This is preferred approach because
using runtime PM just to toggle clock is huge overhead.

Another difference is reseeding itself with generated random data
periodically and during resuming from system suspend (previously driver
was re-seeding itself again with jiffies).

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Stephan Müller <smueller@chronox.de>
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: cavium - Add Cavium HWRNG driver for ThunderX SoC.

The Cavium ThunderX SoC has a hardware random number generator.
This driver provides support using the HWRNG framework.

Signed-off-by: Omer Khaliq <okhaliq@caviumnetworks.com>
Signed-off-by: Ananth Jasty <Ananth.Jasty@cavium.com>
Acked-by: David Daney <david.daney@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: meson - Add Amlogic Meson Hardware Random Generator

Add support for the Amlogic Meson SoCs hardware random generator.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto4xx: integrate ppc4xx-rng into crypto4xx

This patch integrates the ppc4xx-rng driver into the existing
crypto4xx. This is because the true random number generator
is controlled and part of the security core.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: hisi - Add support for Hisilicon SoC RNG

This adds the Hisilicon Random Number Generator(RNG) support,
which is found in Hip04 and Hip05 soc.

Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: pic32 - Add PIC32 RNG hardware driver

Add support for the hardware true random number generator
peripheral found on PIC32.

Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: stm32 - add support for STM32 HW RNG

Add support for STMicroelectronics STM32 random number generator.

The config value defaults to N, reflecting the fact that STM32 is a
very low resource microcontroller platform and unlikely to be targeted
by any "grown up" defconfigs.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: st - Add support for ST's HW Random Number Generator

Signed-off-by: Pankaj Dev <pankaj.dev@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Kieran Bingham <kieranbingham@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: iproc-rng200 - Add Broadcom IPROC RNG driver

This adds a driver for random number generator present on Broadcom
IPROC devices.

Reviewed-by: Ray Jui <rjui@broadcom.com>
Signed-off-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: xgene - add support for APM X-Gene SoC RNG support

This adds the APM X-Gene SoC RNG support.

Signed-off-by: Feng Kan <fkan@apm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: picoxcell - remove unbuildable picoxcell TRNG

The driver for the "Picochip picoXcell true random number generator" was
added in v2.6.39. Its Kconfig symbol has always depended on
PICOXCELL_PC3X3. But that Kconfig symbol has never been part of the
tree. This means this driver has never been buildable. Let's remove it.
It can be re-added if its dependencies are actually part of the tree.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: msm - Add PRNG support for MSM SoC's

This adds a driver for hardware random number generator present
on Qualcomm MSM SoC's.

Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: OMAP3 ROM Random Number Generator support

This driver provides kernel-side support for the Random Number
Generator hardware found on OMAP34xx processors.

This driver comes from Maemo 2.6.28 kernel and was tested on Nokia RX-51.
It is platform device because it needs board specific function for smc calls.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: Add a driver for the hwrng found in power7+ systems

Add a driver for the hwrng found in power7+ systems, based on the
existing code for the arch_get_random_long() hook.

We only register a single instance of the driver, not one per device,
because we use the existing per_cpu array of devices in the arch code.
This means we always read from the "closest" device, avoiding inter-chip
memory traffic.

Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

hwrng: bcm2835 - Add Broadcom BCM2835 RNG driver

This adds a driver for random number generator present on Broadcom BCM2835 SoC,
used in Raspberry Pi and Roku 2 devices.

Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: linux-rpi-kernel@lists.infradead.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hw_random: add support for the TPM chip as a hardware RNG source

This driver will make use of any available TPM chip on the system as a
hwrng source.

Acked-by: David Safford <safford@linux.vnet.ibm.com>
Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>

hw_random: add Broadcom BCM63xx RNG driver

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: mpm@selenic.com
Cc: herbert@gondor.apana.org.au
Patchwork: https://patchwork.linux-mips.org/patch/3327/
Patchwork: https://patchwork.linux-mips.org/patch/4072/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

hwrng: exynos - Add support for Exynos random number generator

This patch supports Exynos SOC's PRNG driver. Exynos's PRNG has 5 seeds and
5 random number outputs. Module is excuted under runtime power management control,
so it activates only while it's in use. Otherwise it will be suspended generally.
It was tested on PQ board by rngtest program.

Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

powerpc/pseries/hwrng: PFO-based hwrng driver

Adds support for the Platform Facilities Option (PFO)-based hardware
random number generator for POWER hardware.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

hw_random: add driver for atmel true hardware random number generator

For the IP block on 9g45/9g46/9m10/9m11.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: ppc4xx - add support for ppc4xx TRNG

Various PowerPC 4xx SoCs contain a TRNG embedded in the Security function.
This adds a device driver for that TRNG.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: pixocell - add support for picoxcell TRNG

This driver adds support for the True Random Number Generator in
the Picochip PC3X3 and later devices.

Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: nomadik - Add hardware RNG driver

The hardware random number generator by ST is used in both the Nomadik
8815 SoC and the U8500. It returns 16 bits every 400ns with automatic
delay if a read is issued too early. It depends on PLAT_NOMADIK.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

MIPS: hw_random: Add hardware RNG for Octeon SOCs.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: hwrng: Add TX4939 RNG driver

This patch adds support for the integrated RNG of the TX4939 SoC.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

i.MX31: Add hw-random for RNGA

This hw-random driver add support to RNGA hardware found
on some i.MX processors.

Signed-off-by: Alan Carvalho de Assis <acassis@gmail.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

hwrng: timeriomem - New driver

Some hardware platforms, the TS-7800[1] is one for example, can
supply the kernel with an entropy source, albeit a slow one for
TS-7800 users, by just reading a particular IO address. This
source must not be read above a certain rate otherwise the quality
suffers.

The driver is then hooked into by calling
platform_device_(register|add|del) passing a structure similar to:
------
static struct timeriomem_rng_data ts78xx_ts_rng_data = {
.address = (u32 *__iomem) TS_RNG,
.period = 1000000, /* one second */
};

static struct platform_device ts78xx_ts_rng_device = {
.name = "timeriomem_rng",
.id = -1,
.dev = {
.platform_data = &ts78xx_ts_rng_data,
},
.num_resources = 0,
};
------

[1] http://www.embeddedarm.com/products/board-detail.php?product=TS-7800

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

sparc64: Add Niagara2 RNG driver.

With feedback and suggestions from Sam Ravnborg.

Signed-off-by: David S. Miller <davem@davemloft.net>

virtio: An entropy device, as suggested by hpa.

Note that by itself, having a "hardware" random generator does very
little: you should probably run "rngd" in your guest to feed this into
the kernel entropy pool.

Included:
virtio_rng: dont use vmalloced addresses for virtio

If virtio_rng is build as a module, random_data is an address
in vmalloc space. As virtio expects guest real addresses, this
can cause any kind of funny behaviour, so lets allocate
random_data dynamically with kmalloc.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

pasemi: hardware rng driver

Driver for the on-chip hardware random number generator on PA Semi
PA6T-1682M.

Signed-off-by: Egor Martovetsky <egor@pasemi.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] allow hwrandom core to be a module

Despite it being small, there should be the option of making it a
module...

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Michael Buesch <mb@bu3sch.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Add TI OMAP CPU family HW RNG driver

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Add ixp4xx HW RNG driver

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Add VIA HW RNG driver

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Add Geode HW RNG driver

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Add AMD HW RNG driver

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Add Intel HW RNG driver

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Add new generic HW RNG core

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>