drbd: stop defining __KERNEL_SYSCALLS__

__KERNEL_SYSCALLS__ hasn't been needed since Linux 2.6.19 so stop
defining it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20230601151646.1386867-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: correctly submit flush bio on barrier

When we receive a flush command (or "barrier" in DRBD), we currently use
a REQ_OP_FLUSH with the REQ_PREFLUSH flag set.

The correct way to submit a flush bio is by using a REQ_OP_WRITE without
any data, and set the REQ_PREFLUSH flag.

Since commit b4a6bb3a67aa ("block: add a sanity check for non-write
flush/fua bios"), this triggers a warning in the block layer, but this
has been broken for quite some time before that.

So use the correct set of flags to actually make the flush happen.

Cc: Christoph Hellwig <hch@infradead.org>
Cc: stable@vger.kernel.org
Fixes: f9ff0da56437 ("drbd: allow parallel flushes for multi-volume resources")
Reported-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230503121937.17232-1-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: Pass a peer device to the resync and online verify functions

Originally-from: Andreas Grünbacher <agruen@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20230330102744.2128122-2-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: pass drbd_peer_device to __req_mod

In preparation to support multiple connections, we need to know which
one we need to modify the request state for.

Originally-from: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20230330102744.2128122-2-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: drbd_uuid_compare: pass a peer_device

Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20230330102744.2128122-2-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: INFO_bm_xfer_stats(): Pass a peer device argument

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20230330102744.2128122-2-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: Add peer device parameter to whole-bitmap I/O handlers

Pass a peer device parameter through the bitmap I/O functions to the I/O
handlers. In after_state_ch(), set that parameter when queuing the
drbd_send_bitmap operation so that this operation knows where to send the
bitmap.

Signed-off-by: Andreas Gruenbacher <agruen@kernel.org>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20230330102744.2128122-2-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: Rename kvfree_rcu() to kvfree_rcu_mightsleep()

The kvfree_rcu() macro's single-argument form is deprecated. Therefore
switch to the new kvfree_rcu_mightsleep() variant. The goal is to
avoid accidental use of the single-argument forms, which can introduce
functionality bugs in atomic contexts and latency bugs in non-atomic
contexts.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Begrudgingly-acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>

Treewide: Stop corrupting socket's task_frag

Since moving to memalloc_nofs_save/restore, SUNRPC has stopped setting the
GFP_NOIO flag on sk_allocation which the networking system uses to decide
when it is safe to use current->task_frag. The results of this are
unexpected corruption in task_frag when SUNRPC is involved in memory
reclaim.

The corruption can be seen in crashes, but the root cause is often
difficult to ascertain as a crashing machine's stack trace will have no
evidence of being near NFS or SUNRPC code. I believe this problem to
be much more pervasive than reports to the community may indicate.

Fix this by having kernel users of sockets that may corrupt task_frag due
to reclaim set sk_use_task_frag = false. Preemptively correcting this
situation for users that still set sk_allocation allows them to convert to
memalloc_nofs_save/restore without the same unexpected corruptions that are
sure to follow, unlikely to show up in testing, and difficult to bisect.

CC: Philipp Reisner <philipp.reisner@linbit.com>
CC: Lars Ellenberg <lars.ellenberg@linbit.com>
CC: "Christoph Böhmwalder" <christoph.boehmwalder@linbit.com>
CC: Jens Axboe <axboe@kernel.dk>
CC: Josef Bacik <josef@toxicpanda.com>
CC: Keith Busch <kbusch@kernel.org>
CC: Christoph Hellwig <hch@lst.de>
CC: Sagi Grimberg <sagi@grimberg.me>
CC: Lee Duncan <lduncan@suse.com>
CC: Chris Leech <cleech@redhat.com>
CC: Mike Christie <michael.christie@oracle.com>
CC: "James E.J. Bottomley" <jejb@linux.ibm.com>
CC: "Martin K. Petersen" <martin.petersen@oracle.com>
CC: Valentina Manea <valentina.manea.m@gmail.com>
CC: Shuah Khan <shuah@kernel.org>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: David Howells <dhowells@redhat.com>
CC: Marc Dionne <marc.dionne@auristor.com>
CC: Steve French <sfrench@samba.org>
CC: Christine Caulfield <ccaulfie@redhat.com>
CC: David Teigland <teigland@redhat.com>
CC: Mark Fasheh <mark@fasheh.com>
CC: Joel Becker <jlbec@evilplan.org>
CC: Joseph Qi <joseph.qi@linux.alibaba.com>
CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: Dominique Martinet <asmadeus@codewreck.org>
CC: Ilya Dryomov <idryomov@gmail.com>
CC: Xiubo Li <xiubli@redhat.com>
CC: Chuck Lever <chuck.lever@oracle.com>
CC: Jeff Layton <jlayton@kernel.org>
CC: Trond Myklebust <trond.myklebust@hammerspace.com>
CC: Anna Schumaker <anna@kernel.org>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>

Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drbd: add context parameter to expect() macro

Originally-from: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20221201110349.1282687-6-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: introduce drbd_ratelimit()

Use call site specific ratelimit instead of one single static global.
Also ratelimit ASSERTION messages generated by expect().

Originally-from: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20221201110349.1282687-5-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

use less confusing names for iov_iter direction initializers

READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.

Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

drbd: use consistent license

DRBD currently has a mix of GPL-2.0 and GPL-2.0-or-later SPDX license
identifiers. We have decided to stick with GPL 2.0 only, so consistently
use that identifier.

Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20221122134301.69258-5-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

treewide: use get_random_u32_below() instead of deprecated function

This is a simple mechanical transformation done by:

@@
expression E;
@@
- prandom_u32_max
+ get_random_u32_below
(E)

Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Reviewed-by: SeongJae Park <sj@kernel.org> # for damon
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

drbd: Store op in drbd_peer_request

(Sort of) cherry-picked from the out-of-tree drbd9 branch. Original
commit message by Joel Colledge:

This simplifies drbd_submit_peer_request by removing most of the
arguments. It also makes the treatment of the op better aligned with
that in struct bio.

Determine fault_type dynamically using information which is already
available instead of passing it in as a parameter.

Note: The opf in receive_rs_deallocated was changed from
REQ_OP_WRITE_ZEROES to REQ_OP_DISCARD. This was required in the
out-of-tree module, and does not matter in-tree. The opf is ignored
anyway in drbd_submit_peer_request, since the discard/zero-out is
decided by the EE_TRIM flag.

Signed-off-by: Joel Colledge <joel.colledge@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20221109133453.51652-4-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

treewide: use prandom_u32_max() when possible, part 1

Rather than incurring a division or requesting too many random bytes for
the given range, use the prandom_u32_max() function, which only takes
the minimum required bytes from the RNG and avoids divisions. This was
done mechanically with this coccinelle script:

@basic@
expression E;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u64;
@@
(
- ((T)get_random_u32() % (E))
+ prandom_u32_max(E)
|
- ((T)get_random_u32() & ((E) - 1))
+ prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2)
|
- ((u64)(E) * get_random_u32() >> 32)
+ prandom_u32_max(E)
|
- ((T)get_random_u32() & ~PAGE_MASK)
+ prandom_u32_max(PAGE_SIZE)
)

@multi_line@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
identifier RAND;
expression E;
@@

- RAND = get_random_u32();
... when != RAND
- RAND %= (E);
+ RAND = prandom_u32_max(E);

// Find a potential literal
@literal_mask@
expression LITERAL;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
position p;
@@

((T)get_random_u32()@p & (LITERAL))

// Add one to the literal.
@script:python add_one@
literal << literal_mask.LITERAL;
RESULT;
@@

value = None
if literal.startswith('0x'):
value = int(literal, 16)
elif literal[0] in '123456789':
value = int(literal, 10)
if value is None:
print("I don't know how to handle %s" % (literal))
cocci.include_match(False)
elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1:
print("Skipping 0x%x for cleanup elsewhere" % (value))
cocci.include_match(False)
elif value & (value + 1) != 0:
print("Skipping 0x%x because it's not a power of two minus one" % (value))
cocci.include_match(False)
elif literal.startswith('0x'):
coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1))
else:
coccinelle.RESULT = cocci.make_expr("%d" % (value + 1))

// Replace the literal mask with the calculated result.
@plus_one@
expression literal_mask.LITERAL;
position literal_mask.p;
expression add_one.RESULT;
identifier FUNC;
@@

- (FUNC()@p & (LITERAL))
+ prandom_u32_max(RESULT)

@collapse_ret@
type T;
identifier VAR;
expression E;
@@

{
- T VAR;
- VAR = (E);
- return VAR;
+ return E;
}

@drop_var@
type T;
identifier VAR;
@@

{
- T VAR;
... when != VAR
}

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: KP Singh <kpsingh@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

block/drbd: remove useless comments in receive_DataReply()

All implementations of req->collision, _req_may_be_done and
drbd_fail_pending_reads have been removed, so remove the comments
in receive_DataReply() that provide no useful information.

Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20220920015216.782190-3-cuigaosheng1@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block/drbd: Combine two drbd_submit_peer_request() arguments

Combine the drbd_submit_peer_request() 'op' and 'op_flags' arguments
into a single argument. This patch does not change any functionality.

Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-15-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block/drbd: Use the enum req_op and blk_opf_t types

Improve static type checking by using the enum req_op type for variables
that represent a request operation and the new blk_opf_t type for
variables that represent request flags.

Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-14-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drdb: Switch to kvfree_rcu() API

Instead of invoking a synchronize_rcu() to free a pointer
after a grace period we can directly make use of new API
that does the same but in more efficient way.

TO: Jens Axboe <axboe@kernel.dk>
TO: Philipp Reisner <philipp.reisner@linbit.com>
TO: Jason Gunthorpe <jgg@nvidia.com>
TO: drbd-dev@lists.linbit.com
TO: linux-block@vger.kernel.org
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20220406190715.1938174-7-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: Replace "unsigned" with "unsigned int"

when run checkpath.pl for the first patch, found that
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'.
so fix it. BTW

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20220406190715.1938174-6-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: Make use of PFN_UP helper macro

it's a refactor to make use of PFN_UP helper macro

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20220406190715.1938174-5-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: drbd: drbd_receiver: Remove redundant assignment to err

Variable err is set to '-EIO' but this value is never read as
it is overwritten or not used later on, hence it is a redundant
assignment and can be removed.

Clean up the following clang-analyzer warning:

drivers/block/drbd/drbd_receiver.c:3955:5: warning: Value stored to
'err' is never read [clang-analyzer-deadcode.DeadStores].

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20220406190715.1938174-4-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: decouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARD

Secure erase is a very different operation from discard in that it is
a data integrity operation vs hint. Fully split the limits and helper
infrastructure to make the separation more clear.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> [nifs2]
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> [f2fs]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Acked-by: Chao Yu <chao@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-27-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: add a bdev_discard_granularity helper

Abstract away implementation details from file systems by providing a
block_device based helper to retrieve the discard granularity.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Link: https://lore.kernel.org/r/20220415045258.199825-26-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: remove QUEUE_FLAG_DISCARD

Just use a non-zero max_discard_sectors as an indicator for discard
support, similar to what is done for write zeroes.

The only places where needs special attention is the RAID5 driver,
which must clear discard support for security reasons by default,
even if the default stacking rules would allow for it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Jan Höppner <hoeppner@linux.ibm.com> [s390]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-25-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: add a bdev_max_discard_sectors helper

Add a helper to query the number of sectors support per each discard bio
based on the block device and use this helper to stop various places from
poking into the request_queue to see if discard is supported and if so how
much. This mirrors what is done e.g. for write zeroes as well.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-24-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

scsi: drbd: Remove WRITE_SAME support

REQ_OP_WRITE_SAME was only ever submitted by the legacy Linux zeroing code,
which has switched to use REQ_OP_WRITE_ZEROES long ago.

Link: https://lore.kernel.org/r/20220209082828.2629273-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drbd: use bvec_kmap_local in recv_dless_read

Using local kmaps slightly reduces the chances to stray writes, and
the bvec interface cleans up the code a little bit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220303111905.321089-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: pass a block_device and opf to bio_alloc

Pass the block_device and operation that we plan to use this bio for to
bio_alloc to optimize the assignment. NULL/0 can be passed, both for the
passthrough case on a raw request_queue and to temporarily avoid
refactoring some nasty code.

Also move the gfp_mask argument after the nr_vecs argument for a much
more logical calling convention matching what most of the kernel does.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220124091107.642561-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: bio_alloc can't fail if it is allow to sleep

Remove handling of NULL returns from sleeping bio_alloc calls given that
those can't fail.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220124091107.642561-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: Use struct_group() to zero algs

In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memset(), avoid intentionally writing across
neighboring fields.

Add a struct_group() for the algs so that memset() can correctly reason
about the size.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20211118203712.1288866-1-keescook@chromium.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: remove unnecessary oom message

Fixes scripts/checkpatch.pl warning:
WARNING: Possible unnecessary 'out of memory' message

Remove it can help us save a bit of memory.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: Fix fall-through warnings for Clang

In preparation to enable -Wimplicit-fallthrough for Clang, fix a couple
of warnings by explicitly adding a break statement instead of just
letting the code fall through to the next, and by adding a fallthrough
pseudo-keyword in places whre the code is intended to fall through.

Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: drbd: drbd_receiver: Demote less than half complete kernel-doc header

Fixes the following W=1 kernel build warning(s):

drivers/block/drbd/drbd_receiver.c:1641: warning: Function parameter or member 'op' not described in 'drbd_submit_peer_request'
drivers/block/drbd/drbd_receiver.c:1641: warning: Function parameter or member 'op_flags' not described in 'drbd_submit_peer_request'
drivers/block/drbd/drbd_receiver.c:1641: warning: Function parameter or member 'fault_type' not described in 'drbd_submit_peer_request'

Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: drbd-dev@lists.linbit.com
Cc: linux-block@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210312105530.2219008-10-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: drbd: drbd_receiver: Demote non-conformant kernel-doc headers

Fixes the following W=1 kernel build warning(s):

drivers/block/drbd/drbd_receiver.c:265: warning: Function parameter or member 'peer_device' not described in 'drbd_alloc_pages'
drivers/block/drbd/drbd_receiver.c:265: warning: Excess function parameter 'device' description in 'drbd_alloc_pages'
drivers/block/drbd/drbd_receiver.c:1362: warning: Function parameter or member 'connection' not described in 'drbd_may_finish_epoch'
drivers/block/drbd/drbd_receiver.c:1362: warning: Excess function parameter 'device' description in 'drbd_may_finish_epoch'
drivers/block/drbd/drbd_receiver.c:1451: warning: Function parameter or member 'resource' not described in 'drbd_bump_write_ordering'
drivers/block/drbd/drbd_receiver.c:1451: warning: Function parameter or member 'bdev' not described in 'drbd_bump_write_ordering'
drivers/block/drbd/drbd_receiver.c:1451: warning: Excess function parameter 'connection' description in 'drbd_bump_write_ordering'
drivers/block/drbd/drbd_receiver.c:1643: warning: Function parameter or member 'op' not described in 'drbd_submit_peer_request'
drivers/block/drbd/drbd_receiver.c:1643: warning: Function parameter or member 'op_flags' not described in 'drbd_submit_peer_request'
drivers/block/drbd/drbd_receiver.c:1643: warning: Function parameter or member 'fault_type' not described in 'drbd_submit_peer_request'
drivers/block/drbd/drbd_receiver.c:1643: warning: Excess function parameter 'rw' description in 'drbd_submit_peer_request'
drivers/block/drbd/drbd_receiver.c:3055: warning: Function parameter or member 'peer_device' not described in 'drbd_asb_recover_0p'
drivers/block/drbd/drbd_receiver.c:3138: warning: Function parameter or member 'peer_device' not described in 'drbd_asb_recover_1p'
drivers/block/drbd/drbd_receiver.c:3195: warning: Function parameter or member 'peer_device' not described in 'drbd_asb_recover_2p'
drivers/block/drbd/drbd_receiver.c:4684: warning: Function parameter or member 'peer_device' not described in 'receive_bitmap_plain'
drivers/block/drbd/drbd_receiver.c:4684: warning: Function parameter or member 'size' not described in 'receive_bitmap_plain'
drivers/block/drbd/drbd_receiver.c:4684: warning: Function parameter or member 'p' not described in 'receive_bitmap_plain'
drivers/block/drbd/drbd_receiver.c:4684: warning: Function parameter or member 'c' not described in 'receive_bitmap_plain'
drivers/block/drbd/drbd_receiver.c:4738: warning: Function parameter or member 'peer_device' not described in 'recv_bm_rle_bits'
drivers/block/drbd/drbd_receiver.c:4738: warning: Function parameter or member 'p' not described in 'recv_bm_rle_bits'
drivers/block/drbd/drbd_receiver.c:4738: warning: Function parameter or member 'c' not described in 'recv_bm_rle_bits'
drivers/block/drbd/drbd_receiver.c:4738: warning: Function parameter or member 'len' not described in 'recv_bm_rle_bits'
drivers/block/drbd/drbd_receiver.c:4807: warning: Function parameter or member 'peer_device' not described in 'decode_bitmap_c'
drivers/block/drbd/drbd_receiver.c:4807: warning: Function parameter or member 'p' not described in 'decode_bitmap_c'
drivers/block/drbd/drbd_receiver.c:4807: warning: Function parameter or member 'c' not described in 'decode_bitmap_c'
drivers/block/drbd/drbd_receiver.c:4807: warning: Function parameter or member 'len' not described in 'decode_bitmap_c'

Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: drbd-dev@lists.linbit.com
Cc: linux-block@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210312105530.2219008-6-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: Avoid comma separated statements

Use semicolons and braces.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: switch partition lookup to use struct block_device

Use struct block_device to lookup partitions on a disk. This removes
all usage of struct hd_struct from the I/O path.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: Chao Yu <yuchao0@huawei.com> [f2fs]
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: allocate struct hd_struct as part of struct bdev_inode

Allocate hd_struct together with struct block_device to pre-load
the lifetime rule changes in preparation of merging the two structures.

Note that part0 was previously embedded into struct gendisk, but is
a separate allocation now, and already points to the block_device instead
of the hd_struct. The lifetime of struct gendisk is still controlled by
the struct device embedded in the part0 hd_struct.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: remove ->this_bdev

DRBD keeps a block device open just to get and set the capacity from
it. Switch to primarily using the disk capacity as intended by the
block layer, and sync it to the bdev using revalidate_disk_size.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: don't detour through bd_contains for the gendisk

bd_disk is set on all block devices, including those for partitions.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

treewide: Use fallthrough pseudo-keyword

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

block: rename generic_make_request to submit_bio_noacct

generic_make_request has always been very confusingly misnamed, so rename
it to submit_bio_noacct to make it clear that it is submit_bio minus
accounting and a few checks.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

sched: Remove sched_set_*() return value

Ingo suggested that since the new sched_set_*() functions are
implemented using the 'nocheck' variants, they really shouldn't ever
fail, so remove the return value.

Cc: axboe@kernel.dk
Cc: daniel.lezcano@linaro.org
Cc: sudeep.holla@arm.com
Cc: airlied@redhat.com
Cc: broonie@kernel.org
Cc: paulmck@kernel.org
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>

sched,drbd: Convert to sched_set_fifo*()

Because SCHED_FIFO is a broken scheduler model (see previous patches)
take away the priority field, the kernel can't possibly make an
informed decision.

In this case, use fifo_low, because it only cares about being above
SCHED_NORMAL. Effectively changes prio from 2 to 1.

Cc: axboe@kernel.dk
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>

tcp: add tcp_sock_set_quickack

Add a helper to directly set the TCP_QUICKACK sockopt from kernel space
without going through a fake uaccess. Cleanup the callers to avoid
pointless wrappers now that this is a simple function call.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: add tcp_sock_set_nodelay

Add a helper to directly set the TCP_NODELAY sockopt from kernel space
without going through a fake uaccess. Cleanup the callers to avoid
pointless wrappers now that this is a simple function call.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: add tcp_sock_set_cork

Add a helper to directly set the TCP_CORK sockopt from kernel space
without going through a fake uaccess. Cleanup the callers to avoid
pointless wrappers now that this is a simple function call.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

block: move the part_stat* helpers from genhd.h to a new header

These macros are just used by a few files. Move them out of genhd.h,
which is included everywhere into a new standalone header.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: fifo_alloc() should use struct_size

Switching to struct_size for the allocation in fifo_alloc avoids
hard-coding the type of fifo_buffer.values in fifo_alloc. It also
provides overflow protection; to avoid pessimistic code being
generated by the compiler as a result, this patch also switches
fifo_size to unsigned, propagating the change as appropriate.

Reviewed-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Stephen Kitt <steve@sk2.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: dynamically allocate shash descriptor

Building with clang and KASAN, we get a warning about an overly large
stack frame on 32-bit architectures:

drivers/block/drbd/drbd_receiver.c:921:31: error: stack frame size of 1280 bytes in function 'conn_connect'
[-Werror,-Wframe-larger-than=]

We already allocate other data dynamically in this function, so
just do the same for the shash descriptor, which makes up most of
this memory.

Link: https://lore.kernel.org/lkml/20190617132440.2721536-1-arnd@arndb.de/
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Roland Kammerer <roland.kammerer@linbit.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 91

Based on 1 normalized pattern(s):

is free software you can redistribute it and or modify it under the
terms of the gnu general public license as published by the free
software foundation either version 2 or at your option any later
version [drbd] is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details you should have received a
copy of the gnu general public license along with [drbd] see the
file copying if not write to the free software foundation 675 mass
ave cambridge ma 02139 usa

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 16 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520075212.050796421@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: shash - remove shash_desc::flags

The flags field in 'struct shash_desc' never actually does anything.
The only ostensibly supported flag is CRYPTO_TFM_REQ_MAY_SLEEP.
However, no shash algorithm ever sleeps, making this flag a no-op.

With this being the case, inevitably some users who can't sleep wrongly
pass MAY_SLEEP. These would all need to be fixed if any shash algorithm
actually started sleeping. For example, the shash_ahash_*() functions,
which wrap a shash algorithm with the ahash API, pass through MAY_SLEEP
from the ahash API to the shash API. However, the shash functions are
called under kmap_atomic(), so actually they're assumed to never sleep.

Even if it turns out that some users do need preemption points while
hashing large buffers, we could easily provide a helper function
crypto_shash_update_large() which divides the data into smaller chunks
and calls crypto_shash_update() and cond_resched() for each chunk. It's
not necessary to have a flag in 'struct shash_desc', nor is it necessary
to make individual shash algorithms aware of this at all.

Therefore, remove shash_desc::flags, and document that the
crypto_shash_*() functions can be called from any context.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

block: Mark expected switch fall-throughs

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

This patch fixes the following warnings:

drivers/block/drbd/drbd_int.h:1774:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/block/drbd/drbd_int.h:1774:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/block/drbd/drbd_int.h:1774:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/block/drbd/drbd_int.h:1774:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/block/drbd/drbd_int.h:1774:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/block/drbd/drbd_receiver.c:3093:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/block/drbd/drbd_receiver.c:3120:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/block/drbd/drbd_req.c:856:6: warning: this statement may fall through [-Wimplicit-fallthrough=]

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough

Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Roland Kammerer <roland.kammerer@linbit.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>

treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively

%pF and %pf are functionally equivalent to %pS and %ps conversion
specifiers. The former are deprecated, therefore switch the current users
to use the preferred variant.

The changes have been produced by the following command:

git grep -l '%p[fF]' | grep -v '^\(tools\|Documentation\)/' | \
while read i; do perl -i -pe 's/%pf/%ps/g; s/%pF/%pS/g;' $i; done

And verifying the result.

Link: http://lkml.kernel.org/r/20190325193229.23390-1-sakari.ailus@linux.intel.com
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: sparclinux@vger.kernel.org
Cc: linux-um@lists.infradead.org
Cc: xen-devel@lists.xenproject.org
Cc: linux-acpi@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: drbd-dev@lists.linbit.com
Cc: linux-block@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-nvdimm@lists.01.org
Cc: linux-pci@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: linux-btrfs@vger.kernel.org
Cc: linux-f2fs-devel@lists.sourceforge.net
Cc: linux-mm@kvack.org
Cc: ceph-devel@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: David Sterba <dsterba@suse.com> (for btrfs)
Acked-by: Mike Rapoport <rppt@linux.ibm.com> (for mm/memblock.c)
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci)
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>

drbd: introduce P_ZEROES (REQ_OP_WRITE_ZEROES on the "wire")

And also re-enable partial-zero-out + discard aligned.

With the introduction of REQ_OP_WRITE_ZEROES,
we started to use that for both WRITE_ZEROES and DISCARDS,
hoping that WRITE_ZEROES would "do what we want",
UNMAP if possible, zero-out the rest.

The example scenario is some LVM "thin" backend.

While an un-allocated block on dm-thin reads as zeroes, on a dm-thin
with "skip_block_zeroing=true", after a partial block write allocated
that block, that same block may well map "undefined old garbage" from
the backends on LBAs that have not yet been written to.

If we cannot distinguish between zero-out and discard on the receiving
side, to avoid "undefined old garbage" to pop up randomly at later times
on supposedly zero-initialized blocks, we'd need to map all discards to
zero-out on the receiving side. But that would potentially do a full
alloc on thinly provisioned backends, even when the expectation was to
unmap/trim/discard/de-allocate.

We need to distinguish on the protocol level, whether we need to guarantee
zeroes (and thus use zero-out, potentially doing the mentioned full-alloc),
or if we want to put the emphasis on discard, and only do a "best effort
zeroing" (by "discarding" blocks aligned to discard-granularity, and zeroing
only potential unaligned head and tail clippings to at least *try* to
avoid "false positives" in an online-verify later), hoping that someone
set skip_block_zeroing=false.

For some discussion regarding this on dm-devel, see also
https://www.mail-archive.com/dm-devel%40redhat.com/msg07965.html
https://www.redhat.com/archives/dm-devel/2018-January/msg00271.html

For backward compatibility, P_TRIM means zero-out, unless the
DRBD_FF_WZEROES feature flag is agreed upon during handshake.

To have upper layers even try to submit WRITE ZEROES requests,
we need to announce "efficient zeroout" independently.

We need to fixup max_write_zeroes_sectors after blk_queue_stack_limits():
if we can handle "zeroes" efficiently on the protocol,
we want to do that, even if our backend does not announce
max_write_zeroes_sectors itself.

Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: don't retry connection if peers do not agree on "authentication" settings

emma: "Unexpected data packet AuthChallenge (0x0010)"
ava: "expected AuthChallenge packet, received: ReportProtocol (0x000b)"
"Authentication of peer failed, trying again."

Pattern repeats.

There is no point in retrying the handshake,
if we expect to receive an AuthChallenge,
but the peer is not even configured to expect or use a shared secret.

Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: fix comment typos

Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: reject attach of unsuitable uuids even if connected

Multiple failure scenario:
a) all good
Connected Primary/Secondary UpToDate/UpToDate
b) lose disk on Primary,
Connected Primary/Secondary Diskless/UpToDate
c) continue to write to the device,
changes only make it to the Secondary storage.
d) lose disk on Secondary,
Connected Primary/Secondary Diskless/Diskless
e) now try to re-attach on Primary

This would have succeeded before, even though that is clearly the
wrong data set to attach to (missing the modifications from c).
Because we only compared our "effective" and the "to-be-attached"
data generation uuid tags if (device->state.conn < C_CONNECTED).

Fix: change that constraint to (device->state.pdsk != D_UP_TO_DATE)
compare the uuids, and reject the attach.

This patch also tries to improve the reverse scenario:
first lose Secondary, then Primary disk,
then try to attach the disk on Secondary.

Before this patch, the attach on the Secondary succeeds, but since commit
drbd: disconnect, if the wrong UUIDs are attached on a connected peer
the Primary will notice unsuitable data, and drop the connection hard.

Though unfortunately at a point in time during the handshake where
we cannot easily abort the attach on the peer without more
refactoring of the handshake.

We now reject any attach to "unsuitable" uuids,
as long as we can see a Primary role,
unless we already have access to "good" data.

Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: attach on connected diskless peer must not shrink a consistent device

If we would reject a new handshake, if the peer had attached first,
and then connected, we should force disconnect if the peer first connects,
and only then attaches.

Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: disconnect, if the wrong UUIDs are attached on a connected peer

With "on-no-data-accessible suspend-io", DRBD requires the next attach
or connect to be to the very same data generation uuid tag it lost last.

If we first lost connection to the peer,
then later lost connection to our own disk,
we would usually refuse to re-connect to the peer,
because it presents the wrong data set.

However, if the peer first connects without a disk,
and then attached its disk, we accepted that same wrong data set,
which would be "unexpected" by any user of that DRBD
and cause "undefined results" (read: very likely data corruption).

The fix is to forcefully disconnect as soon as we notice that the peer
attached to the "wrong" dataset.

Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: ignore "all zero" peer volume sizes in handshake

During handshake, if we are diskless ourselves, we used to accept any size
presented by the peer.

Which could be zero if that peer was just brought up and connected
to us without having a disk attached first, in which case both
peers would just "flip" their volume sizes.

Now, even a diskless node will ignore "zero" sizes
presented by a diskless peer.

Also a currently Diskless Primary will refuse to shrink during handshake:
it may be frozen, and waiting for a "suitable" local disk or peer to
re-appear (on-no-data-accessible suspend-io). If the peer is smaller
than what we used to be, it is not suitable.

The logic for a diskless node during handshake is now supposed to be:
believe the peer, if
- I don't have a current size myself
- we agree on the size anyways
- I do have a current size, am Secondary, and he has the only disk
- I do have a current size, am Primary, and he has the only disk,
which is larger than my current size

Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: narrow rcu_read_lock in drbd_sync_handshake

So far there was the possibility that we called
genlmsg_new(GFP_NOIO)/mutex_lock() while holding an rcu_read_lock().

This included cases like:

drbd_sync_handshake (acquire the RCU lock)
drbd_asb_recover_1p
drbd_khelper
drbd_bcast_event
genlmsg_new(GFP_NOIO) --> may sleep

drbd_sync_handshake (acquire the RCU lock)
drbd_asb_recover_1p
drbd_khelper
notify_helper
genlmsg_new(GFP_NOIO) --> may sleep

drbd_sync_handshake (acquire the RCU lock)
drbd_asb_recover_1p
drbd_khelper
notify_helper
mutex_lock --> may sleep

While using GFP_ATOMIC whould have been possible in the first two cases,
the real fix is to narrow the rcu_read_lock.

Reported-by: Jia-Ju Bai <baijiaju1990@163.com>
Reviewed-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Roland Kammerer <roland.kammerer@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

crypto: drop mask=CRYPTO_ALG_ASYNC from 'shash' tfm allocations

'shash' algorithms are always synchronous, so passing CRYPTO_ALG_ASYNC
in the mask to crypto_alloc_shash() has no effect. Many users therefore
already don't pass it, but some still do. This inconsistency can cause
confusion, especially since the way the 'mask' argument works is
somewhat counterintuitive.

Thus, just remove the unneeded CRYPTO_ALG_ASYNC flags.

This patch shouldn't change any actual behavior.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

iov_iter: Separate type from direction and use accessor functions

In the iov_iter struct, separate the iterator type from the iterator
direction and use accessor functions to access them in most places.

Convert a bunch of places to use switch-statements to access them rather
then chains of bitwise-AND statements. This makes it easier to add further
iterator types. Also, this can be more efficient as to implement a switch
of small contiguous integers, the compiler can use ~50% fewer compare
instructions than it has to use bitwise-and instructions.

Further, cease passing the iterator type into the iterator setup function.
The iterator function can set that itself. Only the direction is required.

Signed-off-by: David Howells <dhowells@redhat.com>

drbd: Convert from ahash to shash

In preparing to remove all stack VLA usage from the kernel[1], this
removes the discouraged use of AHASH_REQUEST_ON_STACK in favor of
the smaller SHASH_DESC_ON_STACK by converting from ahash-wrapped-shash
to direct shash. By removing a layer of indirection this both improves
performance and reduces stack usage. The stack allocation will be made
a fixed size in a later patch to the crypto subsystem.

The bulk of the lines in this change are simple s/ahash/shash/, but the
main logic differences are in drbd_csum_ee() and drbd_csum_bio(), which
externalizes the page walking with k(un)map_atomic() instead of using
scattergather.

[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com

Acked-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: Add part_stat_read_accum to read across field entries.

Add a part_stat_read_accum macro to genhd.h to read and sum across
field entries. For example to sum up the number read and write
sectors completed. In addition to being ar reasonable cleanup by
itself this will make it easier to add new stat fields in the future.

tj: Refreshed on top of v4.17.

Signed-off-by: Michael Callahan <michaelcallahan@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: mark expected switch fall-throughs

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Warning level 2 was used in this case: -Wimplicit-fallthrough=2

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: convert to bioset_init()/mempool_init()

Convert drbd to embedded bio sets and mempools.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: switch to sock_recvmsg()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

drbd: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: drbd-dev@lists.linbit.com
Signed-off-by: Kees Cook <keescook@chromium.org>

drbd: switch from kmalloc() to kmalloc_array()

We had one call to kmalloc that actually allocates an array. Switch that
one to the kmalloc_array() function.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: move global variables to drbd namespace and make some static

This is a follow-up to Gregs complaints that drbd clutteres the global
namespace.
Some of DRBD's module parameters are only used within one compilation
unit. Make these static.

Signed-off-by: Roland Kammerer <roland.kammerer@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: fix race between handshake and admin disconnect/down

conn_try_disconnect() could potentialy hit the BUG_ON()
in _conn_set_state() where it iterates over _drbd_set_state()
and "asserts" via BUG_ON() that the latter was successful.

If the STATE_SENT bit was not yet visible to conn_is_valid_transition()
early in _conn_request_state(), but became visible before conn_set_state()
later in that call path, we could hit the BUG_ON() after _drbd_set_state(),
because it returned SS_IN_TRANSIENT_STATE.

To avoid that race, we better protect set_bit(SENT_STATE) with the spinlock.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: mark symbols static where possible

We get a few warnings when building kernel with W=1:
drbd/drbd_receiver.c:1224:6: warning: no previous prototype for 'one_flush_endio' [-Wmissing-prototypes]
drbd/drbd_req.c:1450:6: warning: no previous prototype for 'send_and_submit_pending' [-Wmissing-prototypes]
drbd/drbd_main.c:924:6: warning: no previous prototype for 'assign_p_sizes_qlim' [-Wmissing-prototypes]
....

In fact, these functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
So this patch marks these functions with 'static'.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: introduce drbd_recv_header_maybe_unplug

Recently, drbd_recv_header() was changed to potentially
implicitly "unplug" the backend device(s), in case there
is currently nothing to receive.

Be more explicit about it: re-introduce the original drbd_recv_header(),
and introduce a new drbd_recv_header_maybe_unplug() for use by the
receiver "main loop".

Using explicit plugging via blk_start_plug(); blk_finish_plug();
really helps the io-scheduler of the backend with merging requests.

Wrap the receiver "main loop" with such a plug.
Also catch unplug events on the Primary,
and try to propagate.

This is performance relevant. Without this, if the receiving side does
not merge requests, number of IOPS on the peer can me significantly
higher than IOPS on the Primary, and can easily become the bottleneck.

Together, both changes should help to reduce the number of IOPS
as seen on the backend of the receiving side, by increasing
the chance of merging mergable requests, without trading latency
for more throughput.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: replace bi_bdev with a gendisk pointer and partitions index

This way we don't need a block_device structure to submit I/O. The
block_device has different life time rules from the gendisk and
request_queue and is usually only available when the block device node
is open. Other callers need to explicitly create one (e.g. the lightnvm
passthrough code, or the new nvme multipathing code).

For the actual I/O path all that we need is the gendisk, which exists
once per block device. But given that the block layer also does
partition remapping we additionally need a partition index, which is
used for said remapping in generic_make_request.

Note that all the block drivers generally want request_queue or
sometimes the gendisk, so this removes a layer of indirection all
over the stack.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: switch bios to blk_status_t

Replace bi_error with a new bi_status to allow for a clear conversion.
Note that device mapper overloaded bi_error with a private value, which
we'll have to keep arround at least for now and thus propagate to a
proper blk_status_t value.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

drbd: implement REQ_OP_WRITE_ZEROES

It seems like DRBD assumes its on the wire TRIM request always zeroes data.
Use that fact to implement REQ_OP_WRITE_ZEROES.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

drbd: make intelligent use of blkdev_issue_zeroout

drbd always wants its discard wire operations to zero the blocks, so
use blkdev_issue_zeroout with the BLKDEV_ZERO_UNMAP flag instead of
reinventing it poorly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

block: add a flags argument to (__)blkdev_issue_zeroout

Turn the existing discard flag into a new BLKDEV_ZERO_UNMAP flag with
similar semantics, but without referring to diѕcard.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>

Fix up affected files that include this signal functionality via sched.h.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/headers: Prepare for new header dependencies before moving code to <uapi/linux/sched/types.h>

We are going to move scheduler ABI details to <uapi/linux/sched/types.h>,
which will be used from a number of .c files.

Create empty placeholder header that maps to <linux/types.h>.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

block: drbd: remove impossible failure handling

For a non-cloned bio, bio_add_page() only returns failure when
the io vec table is full, but in that case, bio->bi_vcnt can't
be zero at all.

So remove the impossible failure handling.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

block,fs: use REQ_* flags directly

Remove the WRITE_* and READ_SYNC wrappers, and just use the flags
directly. Where applicable this also drops usage of the
bio_set_op_attrs wrapper.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

block: rename bio bi_rw to bi_opf

Since commit 63a4cc24867d, bio->bi_rw contains flags in the lower
portion and the op code in the higher portions. This means that
old code that relies on manually setting bi_rw is most likely
going to be broken. Instead of letting that brokeness linger,
rename the member, to force old and out-of-tree code to break
at compile time instead of at runtime.

No intended functional changes in this commit.

Signed-off-by: Jens Axboe <axboe@fb.com>

drbd: correctly handle failed crypto_alloc_hash

crypto_alloc_hash returns an ERR_PTR(), not NULL.

Also reset peer_integrity_tfm to NULL, to not call crypto_free_hash()
on an errno in the cleanup path.

Reported-by: Insu Yun <wuninsu@gmail.com>

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

drbd: code cleanups without semantic changes

This contains various cosmetic fixes ranging from simple typos to
const-ifying, and using booleans properly.

Original commit messages from Fabian's patch set:
drbd: debugfs: constify drbd_version_fops
drbd: use seq_put instead of seq_print where possible
drbd: include linux/uaccess.h instead of asm/uaccess.h
drbd: use const char * const for drbd strings
drbd: kerneldoc warning fix in w_e_end_data_req()
drbd: use unsigned for one bit fields
drbd: use bool for peer is_ states
drbd: fix typo
drbd: use | for bitmask combination
drbd: use true/false for bool
drbd: fix drbd_bm_init() comments
drbd: introduce peer state union
drbd: fix maybe_pull_ahead() locking comments
drbd: use bool for growing
drbd: remove redundant declarations
drbd: replace if/BUG by BUG_ON

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Roland Kammerer <roland.kammerer@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

drbd: sync_handshake: handle identical uuids with current (frozen) Primary

If in a two-primary scenario, we lost our peer, freeze IO,
and are still frozen (no UUID rotation) when the peer comes back
as Secondary after a hard crash, we will see identical UUIDs.

The "rule_nr = 40" chose to use the "CRASHED_PRIMARY" bit as
arbitration, but that would cause the still running (but frozen) Primary
to become SyncTarget (which it typically refuses), and the handshake is
declined.

Fix: check current roles.
If we have *one* current primary, the Primary wins.
(rule_nr = 41)

Since that is a protocol change, use the newly introduced DRBD_FF_WSAME
to determine if rule_nr = 41 can be applied.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

drbd: introduce WRITE_SAME support

We will support WRITE_SAME, if
* all peers support WRITE_SAME (both in kernel and DRBD version),
* all peer devices support WRITE_SAME
* logical_block_size is identical on all peers.

We may at some point introduce a fallback on the receiving side
for devices/kernels that do not support WRITE_SAME,
by open-coding a submit loop. But not yet.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

drbd: report sizes if rejecting too small peer disk

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

drbd: when receiving P_TRIM, zero-out partial unaligned chunks

We can avoid spurious data divergence caused by partially-ignored
discards on certain backends with discard_zeroes_data=0, if we
translate partial unaligned discard requests into explicit zero-out.

The relevant use case is LVM/DM thin.

If on different nodes, DRBD is backed by devices with differing
discard characteristics, discards may lead to data divergence
(old data or garbage left over on one backend, zeroes due to
unmapped areas on the other backend). Online verify would now
potentially report tons of spurious differences.

While probably harmless for most use cases (fstrim on a file system),
DRBD cannot have that, it would violate our promise to upper layers
that our data instances on the nodes are identical.

To be correct and play safe (make sure data is identical on both copies),
we would have to disable discard support, if our local backend (on a
Primary) does not support "discard_zeroes_data=true".

We'd also have to translate discards to explicit zero-out on the
receiving (typically: Secondary) side, unless the receiving side
supports "discard_zeroes_data=true".

Which both would allocate those blocks, instead of unmapping them,
in contrast with expectations.

LVM/DM thin does set discard_zeroes_data=0,
because it silently ignores discards to partial chunks.

We can work around this by checking the alignment first.
For unaligned (wrt. alignment and granularity) or too small discards,
we zero-out the initial (and/or) trailing unaligned partial chunks,
but discard all the aligned full chunks.

At least for LVM/DM thin, the result is effectively "discard_zeroes_data=1".

Arguably it should behave this way internally, by default,
and we'll try to make that happen.

But our workaround is still valid for already deployed setups,
and for other devices that may behave this way.

Setting discard-zeroes-if-aligned=yes will allow DRBD to use
discards, and to announce discard_zeroes_data=true, even on
backends that announce discard_zeroes_data=false.

Setting discard-zeroes-if-aligned=no will cause DRBD to always
fall-back to zero-out on the receiving side, and to not even
announce discard capabilities on the Primary, if the respective
backend announces discard_zeroes_data=false.

We used to ignore the discard_zeroes_data setting completely.
To not break established and expected behaviour, and suddenly
cause fstrim on thin-provisioned LVs to run out-of-space,
instead of freeing up space, the default value is "yes".

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

drbd: allow parallel flushes for multi-volume resources

To maintain write-order fidelity accros all volumes in a DRBD resource,
the receiver of a P_BARRIER needs to issue flushes to all volumes.
We used to do this by calling blkdev_issue_flush(), synchronously,
one volume at a time.

We now submit all flushes to all volumes in parallel, then wait for all
completions, to reduce worst-case latencies on multi-volume resources.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

drbd: Create the protocol feature THIN_RESYNC

If thinly provisioned volumes are used, during a resync the sync source
tries to find out if a block is deallocated. If it is deallocated, then
the resync target uses block_dev_issue_zeroout() on the range in
question.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

drbd: Implement handling of thinly provisioned storage on resync target nodes

If during resync we read only zeroes for a range of sectors assume
that these secotors can be discarded on the sync target node.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

drbd: change bitmap write-out when leaving resync states

When leaving resync states because of disconnect,
do the bitmap write-out synchronously in the drbd_disconnected() path.

When leaving resync states because we go back to AHEAD/BEHIND, or
because resync actually finished, or some disk was lost during resync,
trigger the write-out from after_state_ch().

The bitmap write-out for resync -> ahead/behind was missing completely before.

Note that this is all only an optimization to avoid double-resyncs of
already completed blocks in case this node crashes.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

block, drivers, fs: rename REQ_FLUSH to REQ_PREFLUSH

To avoid confusion between REQ_OP_FLUSH, which is handled by
request_fn drivers, and upper layers requesting the block layer
perform a flush sequence along with possibly a WRITE, this patch
renames REQ_FLUSH to REQ_PREFLUSH.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

drbd: use bio op accessors

Separate the op from the rq_flag_bits and have drbd
set/get the bio using bio_set_op_attrs/bio_op.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

drbd: Use shash and ahash

This patch replaces uses of the long obsolete hash interface with
either shash (for non-SG users) or ahash.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

drbd: use resource name in workqueue

Since kernel 3.3, we can use snprintf-style arguments
to create a workqueue.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

drbd: Create a dedicated workqueue for sending acks on the control connection

The intention is to reduce CPU utilization. Recent measurements
unveiled that the current performance bottleneck is CPU utilization
on the receiving node. The asender thread became CPU limited.

One of the main points is to eliminate the idr_for_each_entry() loop
from the sending acks code path.

One exception in that is sending back ping_acks. These stay
in the ack-receiver thread. Otherwise the logic becomes too
complicated for no added value.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

drbd: Rename asender to ack_receiver

This prepares the next patch where the sending on the meta (or
control) socket is moved to a dedicated workqueue.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

drbd: Backport the "events2" command

The events2 command originates from drbd-9 development. It features
more information but requires a incompatible change in output
format.
Therefore the previous events command continues to exist, the new
improved events2 command becomes available now.

This prepares the user-base for a later switch to the complete
drbd9 code base.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

drbd: Move enum write_ordering_e to drbd.h

Also change the enum values to all-capital letters.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

drbd: Get rid of some first_peer_device() calls

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

mm, page_alloc: distinguish between being unable to sleep, unwilling to sleep and avoiding waking kswapd

__GFP_WAIT has been used to identify atomic context in callers that hold
spinlocks or are in interrupts. They are expected to be high priority and
have access one of two watermarks lower than "min" which can be referred
to as the "atomic reserve". __GFP_HIGH users get access to the first
lower watermark and can be called the "high priority reserve".

Over time, callers had a requirement to not block when fallback options
were available. Some have abused __GFP_WAIT leading to a situation where
an optimisitic allocation with a fallback option can access atomic
reserves.

This patch uses __GFP_ATOMIC to identify callers that are truely atomic,
cannot sleep and have no alternative. High priority users continue to use
__GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and
are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify
callers that want to wake kswapd for background reclaim. __GFP_WAIT is
redefined as a caller that is willing to enter direct reclaim and wake
kswapd for background reclaim.

This patch then converts a number of sites

o __GFP_ATOMIC is used by callers that are high priority and have memory
pools for those requests. GFP_ATOMIC uses this flag.

o Callers that have a limited mempool to guarantee forward progress clear
__GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall
into this category where kswapd will still be woken but atomic reserves
are not used as there is a one-entry mempool to guarantee progress.

o Callers that are checking if they are non-blocking should use the
helper gfpflags_allow_blocking() where possible. This is because
checking for __GFP_WAIT as was done historically now can trigger false
positives. Some exceptions like dm-crypt.c exist where the code intent
is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to
flag manipulations.

o Callers that built their own GFP flags instead of starting with GFP_KERNEL
and friends now also need to specify __GFP_KSWAPD_RECLAIM.

The first key hazard to watch out for is callers that removed __GFP_WAIT
and was depending on access to atomic reserves for inconspicuous reasons.
In some cases it may be appropriate for them to use __GFP_HIGH.

The second key hazard is callers that assembled their own combination of
GFP flags instead of starting with something like GFP_KERNEL. They may
now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless
if it's missed in most cases as other activity will wake kswapd.

Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

net: Add a struct net parameter to sock_create_kern

This is long overdue, and is part of cleaning up how we allocate kernel
sockets that don't reference count struct net.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

block: Add discard flag to blkdev_issue_zeroout() function

blkdev_issue_discard() will zero a given block range. This is done by
way of explicit writing, thus provisioning or allocating the blocks on
disk.

There are use cases where the desired behavior is to zero the blocks but
unprovision them if possible. The blocks must deterministically contain
zeroes when they are subsequently read back.

This patch adds a flag to blkdev_issue_zeroout() that provides this
variant. If the discard flag is set and a block device guarantees
discard_zeroes_data we will use REQ_DISCARD to clear the block range. If
the device does not support discard_zeroes_data or if the discard
request fails we will fall back to first REQ_WRITE_SAME and then a
regular REQ_WRITE.

Also update the callers of blkdev_issue_zero() to reflect the new flag
and make sb_issue_zeroout() prefer the discard approach.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

drbd: fix resync throttling initialization

If for some reason DRBD resync was the only activity on a backend
device, drbd_rs_c_min_rate_throttle() would mistakenly decide that it is
still initialization time, and keep throttling the resync.

This patch explicitly initializes ->rs_last_events to the current
backend event counters, and drops the rs_last_events == 0 from the
throttle condition.

Reported-by: Mikhail Sugakov <msugakov@amazon.de>

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

drbd: Improve asender performance

Shorten receive path in the asender thread. Reduces CPU utilisation
of asender when receiving packets, and with that increases IOPs.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

drbd: Use better variable names

Rename local variable 'ds' to 'disk_state' or 'data_size'.
'dgs' to 'digest_size'

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

drbd: silence underflow warning in read_in_block()

My static checker warns that "data_size" could be negative and underflow
the limit check. The code looks suspicious but I don't know if it is a
real bug.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: debugfs: add callback_history

Add a per-connection worker thread callback_history
with timing details, call site and callback function.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: debugfs: Add in_flight_summary

* Add details about pending meta data operations to in_flight_summary.

* Report number of requests waiting for activity log transactions.

* timing details of peer_requests to in_flight_summary.

* FLUSH details
DRBD devides the incoming request stream into "epochs",
in which peers are allowed to re-order writes independendly.

These epochs are separated by P_BARRIER on the replication link.
Such barrier packets, depending on configuration, may cause
the receiving side to drain the lower level device request queues
and call blkdev_issue_flush().

This is known to be an other major source of latency in DRBD.

Track timing details of calls to blkdev_issue_flush(),
and add them to in_flight_summary.

* data socket stats
To be able to diagnose bottlenecks and root causes of "slow" IO on DRBD,
it is useful to see network buffer stats along with the timing details of
requests, peer requests, and meta data IO.

* pending bitmap IO timing details to in_flight_summary.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: register peer requests on read_ee early

Initialize peer_request with timestamp and proper empty list head.
Add peer_request to list early, so debugfs can find this request and
report it as "preparing", even if we sleep before we actually submit it.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: track timing details of peer_requests

To be able to present timing details in debugfs,
we need to track preparation/submit times of peer requests.

Track peer request flags early,
before they are put on the epoch_entry lists.

Waiting for activity log transactions may be a major latency factor.
We want to be able to present the peer_request state accurately in
debugfs, and what it is waiting for.

Consistently mark/unmark peer requests with EE_CALL_AL_COMPLETE_IO.
Set it only *after* calling drbd_al_begin_io(),
clear it as soon as we call drbd_al_complete_io().

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: improve throttling decisions of background resynchronisation

Background resynchronisation does some "side-stepping", or throttles
itself, if it detects application IO activity, and the current resync
rate estimate is above the configured "cmin-rate".

What was not detected: if there is no application IO,
because it blocks on activity log transactions.

Introduce a new atomic_t ap_actlog_cnt, tracking such blocked requests,
and count non-zero as application IO activity.
This counter is exposed at proc_details level 2 and above.

Also make sure to release the currently locked resync extent
if we side-step due to such voluntary throttling.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: also keep track of trim -> zero-out fallback peer_requests

To be able to find and present such zero-out fallback peer_requests
in debugfs, we add those to "active_ee", once that list drained.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: consistently use list_add_tail for peer_request tracking

Keep the epoch entry lists (active_ee, read_ee, sync_ee, ...)
consistently "oldest first". That way finding the oldest not yet
successfully processed request is simply list_first_entry_or_null.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: application writes may set-in-sync in protocol != C

If "dirty" blocks are written to during resync,
that brings them in-sync.

By explicitly requesting write-acks during resync even in protocol != C,
we now can actually respect this.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: New net configuration option socket-check-timeout

In setups involving a DRBD-proxy and connections that experience a lot of
buffer-bloat it might be necessary to set ping-timeout to an
unusual high value. By default DRBD uses the same value to wait if a newly
established TCP-connection is stable. Since the DRBD-proxy is usually located
in the same data center such a long wait time may hinder DRBD's connect process.

In such setups socket-check-timeout should be set to
at least to the round trip time between DRBD and DRBD-proxy. I.e. in most
cases to 1.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Limit the time we are waiting for the first packet on an accepted socket

Before the patch
'drbd: Keep the listening socket open while trying to connect to the peer'

the newly created socket inherited the receive timeout from the listen
socket. The listen socket had a receive timeout of connect-intervall
+- 30% random jitter.

The real issue is that after the mentioned patch we had no timeout at all.
Now use 4 times the ping-timeout.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: implement csums-after-crash-only

Checksum based resync trades CPU cycles for network bandwidth,
in situations where we expect much of the to-be-resynced blocks
to be actually identical on both sides already.

In a "network hickup" scenario, it won't help:
all to-be-resynced blocks will typically be different.

The use case is for the resync of *potentially* different blocks
after crash recovery -- the crash recovery had marked larger areas
(those covered by the activity log) as need-to-be-resynced,
just in case. Most of those blocks will be identical.

This option makes it possible to configure checksum based resync,
but only actually use it for the first resync after primary crash.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: don't implicitly resize Diskless node beyond end of device

During handshake, we compare backend sizes, and user set limits,
and agree on what device size we are going to expose.

We remember that last-agreed-size in our meta data.

But if we come up diskless, we have to accept what the peer
presents us with. We used to accept the peers maximum potential
capacity (backend size), which is wrong, and could lead to IO errors
due to access beyond end of device.

Instead, we need to accept the peer's current size.
Unless that is communicated as 0, in which case we
accept the backend size, or the user set limit, if set.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: silence -Wmissing-prototypes warnings

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: get rid of drbd_queue_work_front

The last user was al_write_transaction, if called with "delegate",
and the last user to call it with "delegate = true" was the receiver
thread, which has no need to delegate, but can call it himself.

Finally drop the delegate parameter, drop the extra
w_al_write_transaction callback, and drop drbd_queue_work_front.

Do not (yet) change dequeue_work_item to dequeue_work_batch, though.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: allow write-ordering policy to be bumped up again

Previously, once you disabled flushes as a means of enforcing
write-ordering, you'd need to detach/re-attach to enable them again.

Allow drbdsetup disk-options to re-enable previously disabled
write-ordering policy options at runtime.

While at it fix RCU in drbd_bump_write_ordering()
max_allowed_wo() uses rcu_dereference, therefore it must
be called within rcu_read_lock()/rcu_read_unlock()

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: refactor use of first_peer_device()

Reduce the number of calls to first_peer_device(). Instead, call
first_peer_device() just once to assign a local variable peer_device.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: device->ldev is not guaranteed on an D_ATTACHING disk

Some parts of the code assumed that get_ldev_if_state(device, D_ATTACHING)
is sufficient to access the ldev member of the device object. That was
wrong. ldev may not be there or might be freed at any time if the device
has a disk state of D_ATTACHING.

bm_rw()
Documented that drbd_bm_read() is only called from drbd_adm_attach.
drbd_bm_write() is only called when a reference is held, and it is
documented that a caller has to hold a reference before calling
drbd_bm_write()

drbd_bm_write_page()
Use get_ldev() instead of get_ldev_if_state(device, D_ATTACHING)

drbd_bmio_set_n_write()
No longer use get_ldev_if_state(device, D_ATTACHING). All callers
hold a reference to ldev now.

drbd_bmio_clear_n_write()
All callers where holding a reference of ldev anyways. Remove the
misleading get_ldev_if_state(device, D_ATTACHING)

drbd_reconsider_max_bio_size()
Removed the get_ldev_if_state(device, D_ATTACHING). All callers
now pass a struct drbd_backing_dev* when they have a proper
reference, or a NULL pointer.
Before this fix, the receiver could trigger a NULL pointer
deref when in drbd_reconsider_max_bio_size()

drbd_bump_write_ordering()
Used get_ldev_if_state(device, D_ATTACHING) with the wrong assumption.
Remove it, and allow the caller to pass in a struct drbd_backing_dev*
when the caller knows that accessing this bdev is safe.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Move write_ordering from connection to resource

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: fix NULL pointer deref in blk_add_request_payload

Discards don't have any payload.
But the scsi layer still expects a bio_vec it can use internally,
see sd_setup_discard_cmnd() and blk_add_request_payload().

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

drbd: Fix a hole in the challange-response connection authentication

In the implementation as it was, the two peers sent each other
a challenge, and expects the challenge hashed with the shared
secret back.

A attacker could simply wait for the challenge of the peer, and
send the same challenge back. Then it waits for the response, and
sends the same response back.

Prevent this by not accepting a challenge from the peer that is
the same as the challenge sent to the peer.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

drbd: Enable QUEUE_FLAG_DISCARD only if the peer can recieve P_TRIM

Allow the user of REQ_DISCARD.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

drbd: prepare receiving side for REQ_DISCARD

If the receiver needs to serve a discard request on a queue that does
not announce to be discard cabable, it falls back to do synchronous
blkdev_issue_zeroout().

We expect only "reasonably" large (up to one activity log extent?)
discard requests.

We do this to not to not block the receiver for too long in this
fallback code path, and to not set/clear too many bits inside one
spinlock_irq_save() in drbd_set_in_sync/drbd_set_out_of_sync,

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

drbd: don't let application IO pre-empt resync too often

Before, application IO could pre-empt resync activity
for up to hardcoded 20 seconds per resync request.
A very busy server could throttle the effective resync bandwidth
down to one request per 20 seconds.

Now, we only let application IO pre-empt resync traffic
while the current resync rate estimate is above c-min-rate.

If you disable the c-min-rate throttle feature (set c-min-rate = 0),
application IO will no longer pre-empt resync traffic at all.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

drbd: fix potential distributed deadlock during verify or resync

If max-buffers and socket buffer sizes are "too small" for the chosen
resync rate, this could lead potentially lead to a distributed deadlock,
which may or may not resolve itself via the "ko-count" and request
timeout mechanism, or could be resolved by forced disconnect.

One option to deal with this is proper configuration:
use larger max-buffer and socket buffers settings,
or reduce the resync rate.

But even with bad configuration we should not deadlock,
but "gracefully" recover.

The issue is avoided by using only up to max-buffers/2 for resync
requests, and by using max-buffers not as a hard limit for data buffer
allocations, but as a throttle threshold only.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

drbd: Break a deadlock while concurrent fencing and establishing a connection

When we need to outdate the peer while being promoted to primary,
and the connection gets established at the same time, we deadlock
in drbd_try_outdate_peer() when trying to clear the susp_fen
bit.

Fix this by setting the STATE_SENT bit while holding the mutex.

Using drbd_change_state(.. , CS_HARD, ..) which does not block
until STATE_SENT is cleared, is only for clearness. It does
not contribute anything to the fix.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

drbd: don't open-code kernel_recvmsg()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

drbd: Remove unused parameter of wire_flags_to_bio()

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>

drbd: Get rid of first_peer_device() in handle_write_conflicts()

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>

drbd: struct drbd_peer_request: Use drbd_work instead of drbd_device_work

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>

drbd: Turn conn_flush_workqueue() into drbd_flush_workqueue()

The new function can flush any work queue, not just the work queue of the data
socket of a connection.

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>

drbd: Create a dedicated struct drbd_device_work

drbd_device_work is a work item that has a reference to a device,
while drbd_work is a more generic work item that does not carry
a reference to a device.

All callbacks get a pointer to a drbd_work instance, those callbacks
that expect a drbd_device_work use the container_of macro to get it.

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>

drbd: Rename w_prev_work_done -> w_complete

Also move it to drbd_receiver.c and make it static.

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>

drbd: Pass a peer device to a number of fuctions

These functions actually operate on a peer device, or
need a peer device.

drbd_prepare_command(), drbd_send_command(), drbd_send_sync_param()
drbd_send_uuids(), drbd_gen_and_send_sync_uuid(), drbd_send_sizes()
drbd_send_state(), drbd_send_current_state(), and drbd_send_state_req()
drbd_send_sr_reply(), drbd_send_ack(), drbd_send_drequest(),
drbd_send_drequest_csum(), drbd_send_ov_request(), drbd_send_dblock()
drbd_send_block(), drbd_send_out_of_sync(), recv_dless_read()
drbd_drain_block(), receive_bitmap_plain(), recv_resync_read()
read_in_block(), read_for_csum(), drbd_alloc_pages(), drbd_alloc_peer_req()
need_peer_seq(), update_peer_seq(), wait_for_and_update_peer_seq()
drbd_sync_handshake(), drbd_asb_recover_{0,1,2}p(), drbd_connected()
drbd_disconnected(), decode_bitmap_c() and recv_bm_rle_bits()

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>

drbd: Replace vnr_to_mdev() with conn_peer_device()

The new function returns a peer device, which allows us to eliminate a few
instances of first_peer_device().

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>

drbd: drbd_csum_bio(), drbd_csum_ee(): Remove unused device argument

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>

drbd: Rename drbdd_init() -> drbd_receiver()

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>

drbd: Move conf_mutex from connection to resource

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>

drbd: Add explicit device parameter to D_ASSERT

The implicit dependency on a variable inside the macro is problematic.

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>

drbd: Replace and remove the obsolete conn_() macros

With the polymorphic drbd_() macros, we no longer need the connection
specific variants.

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>

drbd: Remove the terrible DEV hack

DRBD was using dev_err() and similar all over the code; instead of having to
write dev_err(disk_to_dev(device->vdisk), ...) to convert a drbd_device into a
kernel device, a DEV macro was used which implicitly references the device
variable. This is terrible; introduce separate drbd_err() and similar macros
with an explicit device parameter instead.

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>

drbd: Turn connection->volumes into connection->peer_devices

Let connection->peer_devices point to peer devices; connection->volumes was
pointing to devices.

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>

drbd: Improve some function and variable naming

Rename functions
conn_destroy() -> drbd_destroy_connection(),
drbd_minor_destroy() -> drbd_destroy_device()
drbd_adm_add_minor() -> drbd_adm_add_minor()
drbd_adm_delete_minor() -> drbd_adm_del_minor()

Rename global variable minors to drbd_devices

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>

drbd: Introduce "peer_device" object between "device" and "connection"

In a setup where a device (aka volume) can replicate to multiple peers and one
connection can be shared between multiple devices, we need separate objects to
represent devices on peer nodes and network connections.

As a first step to introduce multiple connections per device, give each
drbd_device object a single drbd_peer_device object which connects it to a
drbd_connection object.

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>

drbd: Rename drbd_tconn -> drbd_connection

sed -i -e 's:all_tconn:connections:g' -e 's:tconn:connection:g'

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>

drbd: Rename "mdev" to "device"

sed -i -e 's:mdev:device:g'

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>

drbd: Rename struct drbd_conf -> struct drbd_device

sed -i -e 's:\<drbd_conf\>:drbd_device:g'

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>

drbd: Split off on-the-wire protocol definitions

Keep the protocol definitions separate from the kernel code; they are useful in
their own right.

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>

drivers: block: Mark functions as static in drbd_receiver.c

Mark functions conn_wait_active_ee_empty() and
drbd_crypto_alloc_digest_safe() as static in drbd/drbd_receiver.c
because they are not used outside this file.

This eliminates the following warning in drbd/drbd_receiver.c:
drivers/block/drbd/drbd_receiver.c:1401:6: warning: no previous prototype for ‘conn_wait_active_ee_empty’ [-Wmissing-prototypes]
drivers/block/drbd/drbd_receiver.c:3259:21: warning: no previous prototype for ‘drbd_crypto_alloc_digest_safe’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>

block: Convert bio_for_each_segment() to bvec_iter

More prep work for immutable biovecs - with immutable bvecs drivers
won't be able to use the biovec directly, they'll need to use helpers
that take into account bio->bi_iter.bi_bvec_done.

This updates callers for the new usage without changing the
implementation yet.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Paul Clements <Paul.Clements@steeleye.com>
Cc: Jim Paris <jim@jtan.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Yehuda Sadeh <yehuda@inktank.com>
Cc: Sage Weil <sage@inktank.com>
Cc: Alex Elder <elder@inktank.com>
Cc: ceph-devel@vger.kernel.org
Cc: Joshua Morris <josh.h.morris@us.ibm.com>
Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
Cc: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com>
Cc: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Cc: support@lsi.com
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Guo Chao <yan@linux.vnet.ibm.com>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Quoc-Son Anh <quoc-sonx.anh@intel.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Jan Kara <jack@suse.cz>
Cc: linux-m68k@lists.linux-m68k.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: drbd-user@lists.linbit.com
Cc: nbd-general@lists.sourceforge.net
Cc: cbe-oss-dev@lists.ozlabs.org
Cc: xen-devel@lists.xensource.com
Cc: virtualization@lists.linux-foundation.org
Cc: linux-raid@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: DL-MPTFusionLinux@lsi.com
Cc: linux-scsi@vger.kernel.org
Cc: devel@driverdev.osuosl.org
Cc: linux-fsdevel@vger.kernel.org
Cc: cluster-devel@redhat.com
Cc: linux-mm@kvack.org
Acked-by: Geoff Levand <geoff@infradead.org>

block: Abstract out bvec iterator

Immutable biovecs are going to require an explicit iterator. To
implement immutable bvecs, a later patch is going to add a bi_bvec_done
member to this struct; for now, this patch effectively just renames
things.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Yehuda Sadeh <yehuda@inktank.com>
Cc: Sage Weil <sage@inktank.com>
Cc: Alex Elder <elder@inktank.com>
Cc: ceph-devel@vger.kernel.org
Cc: Joshua Morris <josh.h.morris@us.ibm.com>
Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
Cc: Boaz Harrosh <bharrosh@panasas.com>
Cc: Benny Halevy <bhalevy@tonian.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: Joern Engel <joern@logfs.org>
Cc: Prasad Joshi <prasadjoshi.linux@gmail.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Ben Myers <bpm@sgi.com>
Cc: xfs@oss.sgi.com
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Guo Chao <yan@linux.vnet.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: "Roger Pau Monné" <roger.pau@citrix.com>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchand@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Peng Tao <tao.peng@emc.com>
Cc: Andy Adamson <andros@netapp.com>
Cc: fanchaoting <fanchaoting@cn.fujitsu.com>
Cc: Jie Liu <jeff.liu@oracle.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Pankaj Kumar <pankaj.km@samsung.com>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Cc: Mel Gorman <mgorman@suse.de>6

drbd: fix decoding of bitmap vli rle for device sizes > 64 TB

Symptoms: disconnect after bitmap exchange due to
bitmap overflow (e:49731075554) while decoding bm RLE packet

In the decoding step of the variable length integer run length encoding
there was potentially an uncatched bitshift by wordsize (variable >> 64).

The result of which is "undefined" :(
(only "sometimes" the result is the desired 0)

Fix: don't do any bit shift magic for shift == 64, just assign.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: Fix an connection drop issue after enabling allow-two-primaries

Since drbd-8.4.0 it is possible to change the allow-two-primaries
network option while the connection is established.

The sequence code used to partially order packets from the
data socket with packets from the meta-data socket, still assued
that the allow-two-primaries option is constant while the
connection is established.

I.e.
On a node that has the RESOLVE_CONFLICTS bits set, after enabling
allow-two-primaries, when receiving the next data packet it timed out
while waiting for the necessary packets on the data socket to arrive
(wait_for_and_update_peer_seq() function).

Fixed that by always tracking the sequence number, but only waiting
for it if allow-two-primaries is set.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: Allow online change of al-stripes and al-stripe-size

Allow to change the AL layout with an resize operation. For that
the reisze command gets two new fields: al_stripes and al_stripe_size.

In order to make the operation crash save:
1) Lock out all IO and MD-IO
2) Write the super block with MDF_PRIMARY_IND clear
3) write the bitmap to the new location (all zeros, since
we allow only while connected)
4) Initialize the new AL-area
5) Write the super block with the restored MDF_PRIMARY_IND.
6) Unfreeze all IO

Since the AL-layout has no influence on the protocol, this operation
needs to be beforemed on both sides of a resource (if intended).

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: Constants should be UPPERCASE

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: Do not sleep inside rcu

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: rename random32() to prandom_u32()

Use preferable function name which implies using a pseudo-random
number generator.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drbd: use sched_setscheduler()

It was unnoticed for some time that assigning to current->policy is
no longer sufficient to set a real time priority for a kernel thread.

Reported-by: Charlie Suffin <Charlie.Suffin@stratus.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: fix for deadlock when using automatic split-brain-recovery

With an automatic after split-brain recovery policy of
"after-sb-1pri call-pri-lost-after-sb",
when trying to drbd_set_role() to R_SECONDARY,
we run into a deadlock.

This was first recognized and supposedly fixed by
2009-06-10 "Fixed a deadlock when using automatic split brain recovery when both nodes are"
replacing drbd_set_role() with drbd_change_state() in that code-path,
but the first hunk of that patch forgets to remove the drbd_set_role().

We apparently only ever tested the "two primaries" case.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: Fix build error when CONFIG_CRYPTO_HMAC is not set

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: reset ap_in_flight counter for new connections

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: Clarify when activity log I/O is delegated to the worker thread

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: mechanically rename la_size to la_size_sect

Make it obvious that this value is in units of 512 Byte sectors.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: close race between drbd_set_role and drbd_connect

drbd_set_role(, R_PRIMARY, ) does the state change to Primary,
some more housekeeping, and possibly generates a new UUID set.

All of this holding the "state_mutex".

The connection handshake involves sending of various state information,
including the current data generation UUID set, and two connection
state changes from C_WF_CONNECTION to C_WF_REPORT_PARAMS further to
a number of different outcomes, resync being one of them.

If the connection handshake happens between the state change to Primary
and the generation of the new UUIDs, the resync decision based on the
old UUID set may be confused, depending on circumstances.

Make sure that, before we do the handshake, any promotion to Primary
role will either be complete (including the housekeeping stuff), or can
see, and serialize with, the ongoing handshake, based on the
"STATE_SENT" bit, which is set when we start the handshake, and cleared
only when we leave C_WF_REPORT_PARAMS again.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: if the replication link breaks during handshake, keep retrying

The 8.3.12 commit drbd: Bugfix for the connection behavior fixes a
"wasted established connection", if a former connection attempt failed
during its early stages.

However it opened a window for a regression, if a connection attempt
fails during its last stages. The result was a terminated receiver
thread, that left behind the supposedly transient "C_UNCONNECTED" state.
Any later requests to change the connection state fail, as they wait for
the connection state to "stabilize".

Fix: short circuit and keep retrying to restablish a new connection,
if we don't reach C_WF_REPORT_PARAMS.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: check return of kmalloc in receive_uuids

Signed-off-by: Jing Wang <windsdaemon@gmail.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Remove duplicate code

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Call drbd_md_sync() explicitly after a state change on the connection

Without this, the meta-data gets updates after 5 seconds by the
md_sync_timer. Better to do it immeditaly after a state change.

If the asender detects a network failure, it may take a bit until
the worker processes the according after-conn-state-change work item.

The worker might be blocked in sending something, i.e. it
takes until it gets into its timeout. That is 6 seconds by
default which is longer than the 5 seconds of the md_sync_timer.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: properly call drbd_rs_cancel_all() in drbd_disconnected()

drbd_disconnected() is supposed to clear the resync lru cache,
by calling drbd_rs_cancel_all().

We must do so before we call drbd_flush_workqueue(), as at least the
callback w_restart_disk_io() may wait for resync progres, and would
otherwise deadlock.

drbd_finish_peer_reqs() may again populate that cache, which will
then potentially be stale after the next resync handshake and bitmap
exchange, we have to do it again after that.

A stale resync lru cache causes no harm but ugly messages like this:
BAD! sector=196608s enr=6 rs_left=-256 rs_failed=0 count=256 cstate=SyncTarget

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Remove dead code

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Avoid NetworkFailure state during disconnect

Disconnecting is a cluster wide state change. In case the peer node agrees
to the state transition, it sends back the fact on the meta-data connection
and closes both sockets.

In case the node node that initiated the state transfer sees the closing
action on the data-socket, before the P_STATE_CHG_REPLY packet, it was
going into one of the network failure states.

At least with the fencing option set to something else thatn "dont-care",
the unclean shutdown of the connection causes a short IO freeze or
a fence operation.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Protect accesses to the uuid set with a spinlock

There is at least the worker context, the receiver context, the context of
receiving netlink packts.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Don't unregister socket state_change callback from within the callback

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: disambiguation, s/DISCARD_CONCURRENT/RESOLVE_CONFLICTS/

We don't discard anything here, really.
We resolve conflicting, concurrent writes to overlapping data blocks.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: disambiguation, s/P_DISCARD_WRITE/P_SUPERSEDED/

To avoid confusion with REQ_DISCARD aka TRIM, rename our
"discard concurrent write acks" from P_DISCARD_WRITE to P_SUPERSEDED.

At the same time, rename the drbd request event DISCARD_WRITE
to CONFLICT_RESOLVED. It already triggers both successful completion
or restart of the request, depending on our RQ_POSTPONED flag.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Fix a potential issue with the DISCARD_CONCURRENT flag

The DISCARD_CONCURRENT flag should be set on one node and cleared on the
other node.
As the code was before it was theoretical possible that a node accepts the
meta socket, but has to close it later on, and keeps the DISCARD_CONCURRENT
flag.
Correct this by moving the clear_bit(DISCARD_CONCURRENT) where the packet
gets sent.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: More random to the connect logic

Since the listening socket is open all the time, it was possible to
get into stable "initial packet S crossed" loops.

* when both sides realize in the drbd_socket_okay() call at the end
of the loop that the other side closed the main socket you had
the chance to get into a stable loop with repeated "packet S crossed"
messages.

* when both sides do not realize with the drbd_socket_okay() call at the end
of the loop that the other side closed the main socket you had
the chance to get into a stable loop with alternating "packet S crossed"
"packet M crossed" messages.

In order to break out these stable loops randomize the behaviour if
such a crossing of P_INITIAL_DATA or P_INITIAL_META packets is detected.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Try to connec to peer only once per cycle

Since now our listening socket is open all the time we will get
connection tries of the peer always in. No need to try it three
times.

This is valid when connecting to older peers as well, it simply
increases the probability that the new version DRBD will accept
a connection instead that it will establish one.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Remove redundant and wrong test for NULL simplification in conn_connect()

Since the drbd_socket_okay() function itself tests if the the
socket is NULL, the explicit test "if (sock.socket && &msock.socket)"
was redundent.
Apart from that the address opperator ('&') before msock.socket rendered
the test pointless.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: announce FLUSH/FUA capability to upper layers

In 8.4, we may have bios spanning two activity log extents.
Fixup drbd_al_begin_io() and drbd_al_complete_io() to deal with zero sized bios.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: introduce stop-sector to online verify

We now can schedule only a specific range of sectors for online verify,
or interrupt a running verify without interrupting the connection.

Had to bump the protocol version differently, we are now 101.
Added verify_can_do_stop_sector() { protocol >= 97 && protocol != 100; }

Also, the return value convention for worker callbacks has changed,
we returned "true/false" for "keep the connection up" in 8.3,
we return 0 for success and <= for failure in 8.4.
Affected: receive_state()

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: remove struct drbd_tl_epoch objects (barrier works)

cherry-picked and adapted from drbd 9 devel branch

DRBD requests (struct drbd_request) are already on the per resource
transfer log list, and carry their epoch number. We do not need to
additionally link them on other ring lists in other structs.

The drbd sender thread can recognize itself when to send a P_BARRIER,
by tracking the currently processed epoch, and how many writes
have been processed for that epoch.

If the epoch of the request to be processed does not match the currently
processed epoch, any writes have been processed in it, a P_BARRIER for
this last processed epoch is send out first.
The new epoch then becomes the currently processed epoch.

To not get stuck in drbd_al_begin_io() waiting for P_BARRIER_ACK,
the sender thread also needs to handle the case when the current
epoch was closed already, but no new requests are queued yet,
and send out P_BARRIER as soon as possible.

This is done by comparing the per resource "current transfer log epoch"
(tconn->current_tle_nr) with the per connection "currently processed
epoch number" (tconn->send.current_epoch_nr), while waiting for
new requests to be processed in wait_for_work().

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: move the drbd_work_queue from drbd_socket to drbd_connection

cherry-picked and adapted from drbd 9 devel branch
In 8.4, we don't distinguish between "resource work" and "connection
work" yet, we have one worker for both, as we still have only one connection.

We only ever used the "data.work",
no need to keep the "meta.work" around.

Move tconn->data.work to tconn->sender_work.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Keep the listening socket open while trying to connect to the peer

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: pull prepare_listen_socket() out of drbd_wait_for_connect()

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Remove drbd_accept() and use kernel_accept() instead

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Move the call to listen() out of drbd_accept()

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: grammar fix in log message

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: fix spelling, remove boring development log message

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Ensure that data_size is not 0 before using data_size-1 as index

This could be exploited by a peer which runs modified code.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Delay/reject other state changes while establishing a connection

Changes to the role and disk state should be delayed or rejected
while we establish a connection.

This is necessary, since the peer will base its resync decision
on the UUIDs and the state we sent in the drbd_connect() function.

The most prominent example for this race is becoming primary after
sending state and UUIDs and before the state changes to C_WF_CONNECTION.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Fixed processing of disk-barrier, disk-flushes and disk-drain

Since drbd_bump_write_ordering() is called in the attaching
process while the disk state is D_ATTACHING, it was not
considering these three flags during attach.

A call to this function was missing form drbd_adm_disk_opts().

Fixed both issues.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: ignore volume number for drbd barrier packet exchange

Transfer log epochs, and therefore P_BARRIER packets,
are per resource, not per volume.
We must not associate them with "some random volume".

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: fix potential deadlock during "restart" of conflicting writes

w_restart_write(), run from worker context, calls __drbd_make_request()
and further drbd_al_begin_io(, delegate=true), which then
potentially deadlocks. The previous patch moved a BUG_ON to expose
such call paths, which would now be triggered.

Also, if we call __drbd_make_request() from resource worker context,
like w_restart_write() did, and that should block for whatever reason
(!drbd_state_is_stable(), resource suspended, ...),
we potentially deadlock the whole resource, as the worker
is needed for state changes and other things.

Create a dedicated retry workqueue for this instead.

Also make sure that inc_ap_bio()/dec_ap_bio() are properly paired,
even if do_retry() needs to retry itself,
in case __drbd_make_request() returns != 0.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Fix a potential write ordering issue on SyncTarget nodes

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Fix module refcount leak in drbd_accept()

drbd_accept was modelled after kernel_accept
with drbd commit 53eb779 in July 2008.

Only, kernel_accept was then broken, and only fixed later
with kernel commit 1b08534e in Dec 2008:
net: Fix module refcount leak in kernel_accept()

Impact: protocol families provided as modules, e.g. ipv6 or ib_sdp,
would soon have their reference count become negative, preventing
them from being unloaded (likely), or worse, hit zero without actually
being unused, allowing them to be unloaded while still in use (unlikely,
but if triggered, causing a kernel crash).

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Fixed compat issue with disconnecting 8.4 from a primary 8.3

For compatibility reasons 8.4 has to send P_STATE_CHG_REQ (instead
of P_CONN_ST_CHG_REQ) when disconnecting.

In the receiving code path we missed to convert the old
answer (P_STATE_CHG_REPLY) back to 8.4 logic. Therefore
the CL_ST_CHG_SUCCESS or CL_ST_CHG_FAIL bit in the flags word
of mdev got set, while the state code was waiting for
the CONN_WD_ST_CHG_OKAY or CONN_WD_ST_CHG_FAIL bits in tconn.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Restore late assigning of tconn->data.sock and meta.sock

With commit from Mon Mar 28 16:33:12 2011 +0200
"drbd: drbd_connect(): Initialize struct drbd_socket before sending anything"

tconn->data.sock and tconn->meta.sock get assigned early, in
conn_connect.

The early assigning can trigger an OOPS, because it may released the socket
without acquiring the mutex protecting the socket. An other thread (worker)
might use setsockopt() on the socket while it gets free()ed.

Restored the (proven) 8.3 behavior of assigning these sockets after the two
connections are established.

Credits for reporting the issue are going to Arne Redlich.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: fix race between disconnect and receive_state

If the asender thread, or request_timer_fn(), or some other part of
the code, decided to drop the connection (because of timeout or other),
but the receiver just now was processing a P_STATE packet, there was a
chance that receive_state() would do a hard state change
"re-establishing" an already failed connection without additional handshake.

Log excerpt:
Remote failed to finish a request within ko-count * timeout
peer( Secondary -> Unknown ) conn( Connected -> Timeout ) pdsk( UpToDate -> DUnknown )
asender terminated
...
peer( Unknown -> Secondary ) conn( Timeout -> Connected ) pdsk( DUnknown -> UpToDate ) peer_isp( 0 -> 1 )
...
Connection closed
peer( Secondary -> Unknown ) conn( Connected -> Unconnected ) pdsk( UpToDate -> DUnknown ) peer_isp( 1 -> 0 )
receiver terminated

Impact:
while the connection state is erroneously "Connected",
requests may be queued and even sent,
which would never be acknowledged,
and may have been missed by the cleanup.
These requests would never be completed.

The next drbd_suspend_io() will then lock up,
waiting forever for these requests to complete.

Fixed in several code paths:
Make sure the connection state is NetworkFailure or worse
before starting the cleanup in drbd_disconnect().
This should make sure the cleanup won't miss any requests.

Disallow receive_state() to "upgrade" the connection state
from an error state. This will make sure the "illegal" state
transition won't happen.

For all connection failure states,
relax the safe-guard in sanitize_state() again
to silently mask out those state changes
(e.g. Timeout -> Connected becomes Timeout -> Timeout).

Note by Philipp Reisner:
The 3rd chunk described as "relax the safe-guard..."
is not there in 8.4 as it is relaxed to the maximum in
8.4 already

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Load balancing of read requests

New config option for the disk secition "read-balancing", with
the values: prefer-local, prefer-remote, round-robin, when-congested-remote.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Get rid of "ASSERTION FAILED: tconn->current_epoch->list not empty"

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: add missing rcu locks around recently introduced idr_for_each

Recent commit
drbd: Move write_ordering from mdev to tconn
introduced a new idr_for_each loop over all volumes,
but did not take necessary rcu locks or krefs.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Fix the WO=drain implementation for multiple volumes

Wait until IO is drained in all volumes.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Switch drbd_may_finish_epoch() from mdev to tconn

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Move list of epochs from mdev to tconn

This is necessary since the transfer_log on the sending is also
per tconn.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Prepare epochs per connection

An epoch object needs a pointer to the mdev it was received for.
This is necessary to be able to send the barrier ack packet for
the same volume as the original barrier packet was assigned to.

This prepares the next step, in which the (receiver side)
epoch list is moved from the device (mdev) to the connection (tconn)
object.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Move write_ordering from mdev to tconn

This is necessary in order to prepare the move of the (receiver side)
epoch list from the device (mdev) to the connection (tconn) objects.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Fixed an obvious copy-n-paste mistake

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Fixes from the drbd-8.3 branch

* drbd-8.3:
drbd: O_SYNC gives EIO on ramdisks for some kernels (eg. RHEL6).
drbd: send intermediate state change results to the peer

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Silenced compiler warnings

Since version 4.6.1 gcc warns about variables that get
a value assigned, but which are never read later on.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: fix "stalled" empty resync

With sync-after dependencies, given "lucky" timing of pause/unpause
events, and the end of an empty (0 bits set) resync was sometimes not
detected on the SyncTarget, leading to a "stalled" SyncSource state.

Fixed this by expecting not only "Inconsistent -> UpToDate" but also
"Consistent -> UpToDate" transitions for the peer disk state
to end a resync.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Consider the discard-my-data flag for all volumes [bugz 359]

...not only for the first volume

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Cleanup all epoch objects upon connection loss

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Bugfix for the connection behavior

If we get into the C_BROKEN_PIPE cstate once, the state engine set the
thi->t_state of the receiver thread to restarting. But with the while loop
in drbdd_init() a new connection gets established. After the call into
drbdd() returns immediately since the thi->t_state is not RUNNING. The
restart of drbd_init() then resets thi->t_state to RUNNING.

I.e. after entering C_BROKEN_PIPE once, the next successful established
connection gets wasted.

The two parts of the fix:
* Do not cause the thread to restart if we detect the issue
with the sockets while we are in C_WF_CONNECTION.

* Make sure that all actions that would have set us to C_BROKEN_PIPE
happen before the state change to C_WF_REPORT_PARAMS.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Fix the data-integrity-alg setting

The last data-integrity-alg fix made data integrity checking work when the
algorithm was changed for an established connection, but the common case of
configuring the algorithm before connecting was still broken. Fix that.

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: receive_protocol(): We cannot change our own data-integrity-alg setting here

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Be consistent in reporting incompatibilities in P_PROTOCOL settings

Refer to the settings by the names which drbdsetup and drbd.conf are using.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: receive_protocol(): Make the program flow less confusing

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: receive_protocol(): Give variables more easily searchable names

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Print memory address in hex instead of decimal in error message

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Fixed removal of volumes/devices from connected resources

When removing a volume/device we need to switch the connection
status of the peer back into WFReportParams.

Before this fix it was left in Connected state. That means that
the peer device continued to inform us about state changes, etc...
But we deleted that minor -> protocol error.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: detach from frozen backing device

* drbd-8.3:
documentation: Documented detach's --force and disk's --disk-timeout
drbd: Implemented the disk-timeout option
drbd: Force flag for the detach operation
drbd: Allow new IOs while the local disk in in FAILED state
drbd: Bitmap IO functions can not return prematurely if the disk breaks
drbd: Added a kref to bm_aio_ctx
drbd: Hold a reference to ldev while doing meta-data IO
drbd: Keep a reference to the bio until the completion handler finished
drbd: Implemented wait_until_done_or_disk_failure()
drbd: Replaced md_io_mutex by an atomic: md_io_in_use
drbd: moved md_io into mdev
drbd: Immediately allow completion of IOs, that wait for IO completions on a failed disk
drbd: Keep a reference to barrier acked requests

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Improve the "unexpected packet" error messages

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Rename --dry-run to --tentative

drbdadm already has a --dry-run option, so this option cannot directly be
passed through to drbdsetup. Rename the drbdsetup option to resolve this
conflict.

For backward compatibility, make --dry-run an alias of --tentative.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Convert the generic netlink interface to accept connection endpoints

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Lower log priority for an event that is definitely not an error

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Receiving part for the PROTOCOL_UPDATE packet

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Allocation of int_dig_in and int_dig_vv was missing

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Made cmp_after_sb() more generic into convert_after_sb()

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Refer to connect-int consistently throughout the code

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Refer to resync-rate consistently throughout the code

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Rename the want_lose field/flag to discard_my_data

This is what it is called in config files and on the command line as
well.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Removing drbd_cfg_rwsem

* Updates to all configuration items is done under genl_lock().
Including removal of mdevs or tconns.
* All read non sleeping read sides are protected by rcu
* All sleeping read sides keep reference counts to keep the
objects alive

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Refcounting for mdev objects

Preparing removal of drbd_cfg_rwsem

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Turn no-tcp-cork into tcp-cork={yes|no}

Change the --no-tcp-cork drbdsetup command line option as well as
the no_cork netlink packet.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Turn no-disk-drain into disk-drain={yes|no}

Change the --no-disk-drain drbdsetup command line option as well as
the no_disk_drain netlink packet.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Turn no-disk-flushes into disk-flushes={yes|no}

Change the --no-disk-flushes drbdsetup command line option as well as
the no_disk_flush netlink packet.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: RCU for rs_plan_s

This removes the issue with using peer_seq_lock out of different
contexts.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Made the fifo object a self contained object (preparing for RCU)

* Moved rs_planed into it, named total
* When having a pointer to the object the values can
be embedded into the fifo object.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: RCU for disk_conf

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Renamed (old|new)_conf into (old|new)_net_conf in receive_SyncParam

Preparing RCU for disk_conf

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: drbd_dew_dev_size() gets the user requests disk_size as argument

Preparing RCU for disk_conf

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Renamed the net_conf_update mutex to conf_update

Preparing to use the same mutex for disk_conf updates

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: fix race when forcefully disconnecting

If a forced disconnect hits a restarting receiver right after it passed
its final "if (C_DISCONNECTING)" test in drbdd_init(), but before it was
actually restarted by drbd_thread_setup, we could be left with a
connection stuck in C_DISCONNECTING, never reaching C_STANDALONE,
which would be necessary to take it down or reconfigure it.

Move the last cleanup into w_after_conn_state_ch(), and do an additional
state change request in conn_try_disconnect(), just in case.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Allow to change data-integrity-alg on the fly

The main purpose of this is to allow to turn data integrity checking on
and off on demand without causing interruptions.

Implemented by allocating tconn->peer_integrity_tfm only when receiving
a P_PROTOCOL message. l accesses to tconn->peer_integrity_tf happen in
worker context, and no further synchronization is necessary.

On the sender side, tconn->integrity_tfm is modified under
tconn->data.mutex, and a P_PROTOCOL message is sent whenever. All
accesses to tconn->integrity_tfm already happen under this mutex.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Remove obsolete drbd_crypto_is_hash()

We allocate hash transformations with crypto_alloc_hash() which will
only return hash algorithms. It is not necessary to reconfirm that we
actually got a hash algorithm.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Rename integrity_r_tfm -> peer_integrity_tfm

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Wrong use of RCU in receive_protocol()

It is not enough to grab net_conf->integrity_alg under rcu_read_lock()
and access it outside of it; the entire net_conf object may be gone by
then.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: fix various disconnecting races

If an admin requests disconnect at a time when the state handling
already disconnects/reconnects, there have been some races.

Make sure to always really stop the network threads before
returning success for disconnect. Do not pretend successfull
forced disconnect, if the state handling returned an error.

Return success from drbd_adm_down() only after all threads are finished.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Considering that the two_primaries config flag can change

Now since it is possible to change the two_primaries config
flag while the connection is up, make sure we treat a peer_req
in a consistent way if the config flag changes while the peer_req
is under IO.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Proper locking for updates to net_conf under RCU

Removing the get_net_conf()/put_net_conf() functions

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: rcu_read_lock() and rcu_dereference() for tconn->net_conf

Removing the get_net_conf()/put_net_conf() calls

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Runtime changeable wire protocol

The wire protocol is no longer a property that is negotiated
between the two peers. It is now expressed with two bits
(DP_SEND_WRITE_ACK and DP_SEND_RECEIVE_ACK) in each data
packet. Therefore the primary node is free to change the
wire protocol at any time without disconnect/reconnect.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: protect all idr accesses that might sleep with drbd_cfg_rwsem

With this commit the locking for all accesses to IDRs is complete:

* Non sleeping read accesses are protected by RCU
* sleeping read accesses are protocted by a read lock on drbd_cfg_rwsem
* accesses that add anything are protected by a write lock
* accesses that remove an object are protoected by a write lock
and a call to synchronize_rcu() after it is removed from the IDR
and before the object is actually free()ed.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: rcu_read_[un]lock() for all idr accesses that do not sleep

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Rename drbd_pp_free() to drbd_free_pages()

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Rename drbd_pp_alloc() to drbd_alloc_pages() and make it non-static

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Rename drbd_pp_first_pages_or_try_alloc() to __drbd_alloc_pages()

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Make drbd_wait_ee_list_empty() and _drbd_wait_ee_list_empty() static

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Rename drbd_{ ee -> peer_req }_has_active_page

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Rename reclaim_net_ee(), drbd_process_done_ee(), drbd_process_done_ee(), tconn_process_done_ee() to *_peer_reqs

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Rename drbd_release_ee() to drbd_free_peer_reqs()

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Rename drbd_free_ee() and variants to *_peer_req()

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Rename drbd_alloc_ee() to drbd_alloc_peer_req()

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: drbd_init_ee() no longer exists

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Make all asynchronous command handlers return 0 upon success and an error code otherwise

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: validate_req_change_req_state(): Return 0 upon success and an error code otherwise

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Removed outdated comments and code that envisioned VNRs in header 95

Since have now header 100, that has space for 16 bit volume numbers,
the high byte of the length in header 95 is no longer reserved for
8 bit volume numbers.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Introduce protocol version 100 headers

The 8 byte header finally becomes too small. With the protocol 100 header we
have 16 bit for the volume number, proper 32 bit for the data length, and
32 bit for further extensions in the future.

Previous versions of drbd are using version 80 headers for all packets
short enough for protocol 80. They support both header versions in
worker context, but only version 80 headers in asynchronous context.
For backwards compatibility, continue to use version 80 headers for
short packets before protocol version 100.

From protocol version 100 on, use the same header version for all
packets.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Remove headers from on-the-wire data structures (struct p_*)

Prepare the introduction of the protocol 100 headers. The actual protocol
header is removed for the packet declarations. I.e. allow us to use the
packets with different headers.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Remove some fixed header size assumptions

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Replace and remove old primitives

Centralize sock->mutex locking and unlocking in [drbd|conn]_prepare_command()
and [drbd|conn]_send_comman().

Therefore all *_send_* functions are touched to use these primitives instead
of drbd_get_data_sock()/drbd_put_data_sock() and former helper functions.

That change makes the *_send_* functions more standardized.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Introduce drbd_header_size()

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: drbd_send_ping(), drbd_send_ping(): Return 0 upon success and an error code otherwise

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Use tconn in request_timer_fn()

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Renamed id_susp(union drbd_state s) to drbd_suspended(struct drbd_conf *)

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Introduced drbd_read_state()

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: preparation commit, pass drbd_interval to drbd_al_begin/complete_io

We want to avoid bio_split for bios crossing activity log boundaries.
So we may need to activate two activity log extents "atomically".
drbd_al_begin_io() needs to know more than just the start sector.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Change how the "handshake" packets are called

Packets of type P_HAND_SHAKE define which protocol versions and features
a node supports. For clarity, call those packets P_CONNECTION_FEATURES
instead.

(This does not determine the features that a specific drbd device
supports, such as drbd protocol A, B, C.)

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Change how the initial packets are called

The first packets exchanged when a connection is established are
referred to as P_HAND_SHAKE_S and P_HAND_SHAKE_M in the code, followed
by P_HAND_SHAKE packets. To avoid confusion between these two unrelated
things, call the initial packets P_INITIAL_DATA and P_INITIAL_META.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: _conn_send_cmd(), _drbd_send_cmd(): Pass a struct drbd_socket instead of a plain socket

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: drbd_connect(): Initialize struct drbd_socket before sending anything

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Map from (connection, volume number) to device in the asender handlers

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Pass struct packet_info down to the asender receive functions

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Allow to disconnect if one volume is diskless

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Map from (connection, volume number) to device in the receive handlers

The receive handlers do not all handle unknown volume numbers the same
way.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Pass struct packet_info down to the receive functions

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Remove useless error messages

These messages can only trigger in case there is a pretty obvious
internal programming error.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: A small cleanup in drbdd()

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Preallocate one page per drbd_socket as a send buffer

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: receive_bitmap(): Use the pre-allocated receive buffer

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Preallocate one page per drbd_socket as a receive buffer

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Converted drbd_try_outdate_peer() from mdev to tconn

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Rename the DCBP_* functions to dcbp_* and move them to where they are used

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Always use the same protocol version for the same peer

There is no need to send protocol 80 headers to peers that understand
protocol 95 headers. Make sure that we don't send protocol 95 headers
until we have agreed upon a protocol version with our peer, though.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: drbd_connected(): Return an error code upon failure.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>