ACPI: TAD: Install SystemCMOS address space handler for ACPI000E

Currently, the SystemCMOS address space handler is installed for the
ACPI RTC devices (PNP0B00/PNP0B01/PNP0B02) only. But there are platforms
with SystemCMOS Operetion Region defined under the ACPI Time and Alarm
Device (ACPI000E), which is used by the ACPI pre-defined control methods
like _GRT (Get the Real time) and _SRT (Set the Real time).

When accessing these control methods via the acpi_tad sysfs interface,
missing SystemCMOS address space handler causes errors like below
[ 478.255453] ACPI Error: No handler for Region [RTCM] (00000000a8d2dd39) [SystemCMOS] (20230331/evregion-130)
[ 478.255458] ACPI Error: Region SystemCMOS (ID=5) has no handler (20230331/exfldio-261)
[ 478.255461] Initialized Local Variables for Method [_GRT]:
[ 478.255461] Local1: 00000000f182542c <Obj> Integer 0000000000000000
[ 478.255464] No Arguments are initialized for method [_GRT]
[ 478.255465] ACPI Error: Aborting method \_SB.AWAC._GRT due to previous error (AE_NOT_EXIST) (20230331/psparse-529)

Export two APIs for SystemCMOS address space handler from acpi_cmos_rtc
scan handler and install the handler for the ACPI Time and Alarm Device
from the ACPI TAD driver.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217714
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[ rjw: Subject and changelog edits, whitespace adjustment ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPI: cmos_rtc: Using pr_fmt() and remove PREFIX

Introduce pr_fmt() and remove printk PREFIX to unify the
log message printing.

Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPI: cmos_rtc: Remove leftover ACPI_MODULE_NAME()

ACPI_MODULE_NAME() is only needed for ACPICA debug functionality
such as ACPI_DEBUG_PRINT() which is not used in acpi_cmos_rtc.c,
remove it.

Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

char/genrtc: x86: remove remnants of asm/rtc.h

Commit 3195ef59cb42 ("x86: Do full rtc synchronization with ntp") had
the side-effect of unconditionally enabling the RTC_LIB symbol on x86,
which in turn disables the selection of the CONFIG_RTC and
CONFIG_GEN_RTC drivers that contain a two older implementations of
the CONFIG_RTC_DRV_CMOS driver.

This removes x86 from the list for genrtc, and changes all references
to the asm/rtc.h header to instead point to the interfaces
from linux/mc146818rtc.h.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

ACPI / RTC: Fix CMOS RTC opregion handler accesses to wrong addresses

The value64 parameter is an u64 point that used to transfer the value
for write to CMOS, or used to return the value that's read from CMOS.

The value64 is an u64 point, so don't need get address again. It causes
acpi_cmos_rtc_space_handler always return 0 to reader and didn't write
expected value to CMOS.

Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Cc: 3.11+ <stable@vger.kernel.org> # 3.11+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPI / PNP: use device ID list for PNPACPI device enumeration

ACPI can be used to enumerate PNP devices, but the code does not
handle this in the right way currently. Namely, if an ACPI device
object
1. Has a _CRS method,
2. Has an identification of
"three capital characters followed by four hex digits",
3. Is not in the excluded IDs list,
it will be enumerated to PNP bus (that is, a PNP device object will
be create for it). This means that, actually, the PNP bus type is
used as the default bus type for enumerating _HID devices in ACPI.

However, more and more _HID devices need to be enumerated to the
platform bus instead (that is, platform device objects need to be
created for them). As a result, the device ID list in acpi_platform.c
is used to enforce creating platform device objects rather than PNP
device objects for matching devices. That list has been continuously
growing recently, unfortunately, and it is pretty much guaranteed to
grow even more in the future.

To address that problem it is better to enumerate _HID devices
as platform devices by default. To this end, change the way of
enumerating PNP devices by adding a PNP ACPI scan handler that
will use a device ID list to create PNP devices for the ACPI
device objects whose device IDs are present in that list.

The initial device ID list in the PNP ACPI scan handler contains
all of the pnp_device_id strings from all the existing PNP drivers,
so this change should be transparent to the PNP core and all of the
PNP drivers. Still, in the future it should be possible to reduce
its size by converting PNP drivers that need not be PNP for any
technical reasons into platform drivers.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[rjw: Rewrote the changelog, modified the PNP ACPI scan handler code]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>

ACPI: Remove duplicate definitions of PREFIX

We already have a macro for PREFIX of "ACPI: " in
drivers/acpi/internal.h, so remove the duplicate ones
in ACPI drivers when internal.h is included.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPI: Add CMOS RTC Operation Region handler support

On HP Folio 13-2000, the BIOS defines a CMOS RTC Operation Region and
the EC's _REG methord accesses that region. Thus an appropriate
address space handler must be registered for that region before the
EC driver is loaded.

Introduce a mechanism for adding CMOS RTC address space handlers.
Register an ACPI scan handler for CMOS RTC devices such that, when
a device of that kind is detected during an ACPI namespace scan, a
common CMOS RTC operation region address space handler will be
installed for it.

References: https://bugzilla.kernel.org/show_bug.cgi?id=54621
Reported-and-tested-by: Stefan Nagy <public@stefan-nagy.at>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Cc: 3.9+ <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>