accel/ivpu: Remove d3hot_after_power_off WA

Always enter D3hot after entering D0i3 an all platforms.
This minimizes power usage.

Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-3-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Rename VPU to NPU in message strings

VPU was renamed to NPU but due to large overhead of renaming
all the sources only user visible messages are being updated.

Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240214081305.290108-9-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Use lazy allocation for doorbell IDs

Reserve/allocate and free doorbells for command queues when needed
using xarray. This allows to avoid reserving a doorbell for
a contexts that never issues a job.

Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240214081305.290108-6-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Fix dev open/close races with unbind

- Add context_list_lock to synchronize user context addition/removal
- Use drm_dev_enter() to prevent unbinding the device during ivpu_open()
and vpu address allocation

Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Wachowski, Karol <karol.wachowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240122120945.1150728-2-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Deprecate DRM_IVPU_PARAM_CONTEXT_PRIORITY param

DRM_IVPU_PARAM_CONTEXT_PRIORITY has been deprecated because it
has been replaced with DRM_IVPU_JOB_PRIORITY levels set with
submit IOCTL and was unused anyway.

Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240115134434.493839-10-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Add debug prints for MMU map/unmap operations

It is common need to be able to see IOVA/physical to VPU addresses
mappings. Especially when debugging different kind of memory related
issues. Lack of such logs forces user to modify and recompile KMD manually.

This commit adds those logs under MMU debug mask which can be turned on
dynamically with module param during KMD load.

Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240115134434.493839-4-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Use threaded IRQ to handle JOB done messages

Remove job_done thread and replace it with generic callback based
mechanism.

Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231113170252.758137-6-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Fix locking in ivpu_bo_remove_all_bos_from_context()

ivpu_bo_remove_all_bos_from_context() could race with ivpu_bo_free()
when prime buffer was closed after vpu device was closed.

Move the bo_list from context to vdev and use a dedicated lock to
sync it. This list is not modified when BO is added/removed from
a context.

Also rename ivpu_bo_free_vpu_addr() to ivpu_bo_unbind() because this
function does more then just free vpu_addr.

Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231031073156.1301669-3-stanislaw.gruszka@linux.intel.com

accel/ivpu: Rename VPU to NPU in product strings

VPU was rebranded as NPU (Neural Processing Unit) so user facing
strings have to be updated but the code remains as is and the module
is still called intel_vpu.ko.

Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231028155936.1183342-9-stanislaw.gruszka@linux.intel.com

accel/ivpu: Add support for delayed D0i3 entry message

Currently the VPU firmware prepares for D0i3 every time the VPU
is entering D0i2 Idle state. This is not optimal as we might not
enter D0i3 every time we enter D0i2 Idle and this preparation
is quite costly.

This optimization moves D0i3 preparation to a dedicated
message sent from the host driver only when the driver is about
to enter D0i3 - this reduces power consumption and latency for
certain workloads, for example audio workloads that submit
inference every 10 ms.

The VPU needs non zero time to enter IDLE state after responding to
D0i3 entry message. If the driver does not wait for the VPU to enter
IDLE state it could cause warm boot failures.

Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-12-stanislaw.gruszka@linux.intel.com

accel/ivpu: Change test_mode module param to bitmask

Change meaning of test_mode module parameter from integer value
to bitmask allowing setting different test features with corresponding
bits.

Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-7-stanislaw.gruszka@linux.intel.com

accel/ivpu: Add support for VPU_JOB_FLAGS_NULL_SUBMISSION_MASK

Add test_mode = 3 that add VPU_JOB_FLAGS_NULL_SUBMISSION_MASK
flag to the job send to the VPU device. Then the VPU will process
the job but won't execute commands (except the command to signal
the fence).

This can be used to estimate job processing overhead in the host
software and VPU firmware.

Unlike the null hardware mode, the null submission mode will
still work even if UMD uses VPU fences to track job completion.

Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-6-stanislaw.gruszka@linux.intel.com

accel/ivpu: Print information about used workarounds

Use ivpu_dbg(MISC) to print information about workarounds.

Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901094957.168898-6-stanislaw.gruszka@linux.intel.com

accel/ivpu: Initialize context with SSID = 1

Context with SSID = 1 is reserved and accesses on that context happen
only when context is uninitialized on the VPU side. Such access triggers
MMU fault (0xa) "Invalid CD Fetch", which doesn't contain any useful
information besides context ID.

This commit will change that state, now (0x10) "Translation fault" will
be triggered and accessed address will shown in the log.

Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901094957.168898-7-stanislaw.gruszka@linux.intel.com

accel/ivpu: Move set autosuspend delay to HW specific code

Configure autosuspend values per HW generation and per platform.

For non silicon platforms disable autosuspend for now, for silicon
reduce it to 10 ms.

Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901094957.168898-2-stanislaw.gruszka@linux.intel.com

accel/ivpu: Don't enter d0i3 during FLR

Avoid HW bug on some platforms where we enter D0i3 state
and CPU is in low power states (C8 or above).

Fixes: 852be13f3bd3 ("accel/ivpu: Add PM support")
Cc: stable@vger.kernel.org
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231003064213.1527327-1-stanislaw.gruszka@linux.intel.com

accel/ivpu: Add Arrow Lake pci id

Enable VPU on Arrow Lake CPUs.

Reviewed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230922132206.812817-1-stanislaw.gruszka@linux.intel.com

accel/ivpu: Add initial support for VPU 4

Add support VPU 4 - new generation of VPU IP with various
hardware design improvements. From driver point of view, it differs
in register set, initialization process and MMU memory ranges.

Co-developed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Co-developed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Co-developed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731161258.2987564-7-stanislaw.gruszka@linux.intel.com

accel/ivpu: Use generation based function and registers names

Given that VPU generation can be used by multiple platforms, driver should
use VPU IP generation names instead of a platform.

Change naming for functions and registries.

Use 37XX format, where:
3 - major VPU IP generation version
7 - minor VPU IP generation version
XX - postfix indicating this is an architecture and not marketing name

Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731161258.2987564-3-stanislaw.gruszka@linux.intel.com

accel/ivpu: Mark 64 kB contiguous areas as contiguous in PTEs

Whenever KMD maps region larger than 64kB that is both aligned and
contiguous, set contiguous bit (52) in MMU PTE descriptor for each page
in that region.

This allows to treat 16 contiguous pages as one and reduce
number of MMU page walks required which results in lower latency.

Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230518131605.650622-6-stanislaw.gruszka@linux.intel.com

accel/ivpu: Clear specific interrupt status bits on C0

MTL C0 stepping fixed issue related to butrress interrupt status clearing,
to clear an interrupt status it is required to write 1 to specific
status bit field. This allows to execute read, modify and write routine.

Writing 0 will not clear the interrupt and will cause interrupt storm.

Fixes: 35b137630f08 ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Cc: stable@vger.kernel.org # 6.3.x
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230703080725.2065635-2-stanislaw.gruszka@linux.intel.com

accel/ivpu: Disable buttress on device removal

Use pci_set_power_state() to disable buttress when device is removed.
This is workaround of hardware bug that hangs the system.

Additionally not disabling buttress prevents CPU enter deeper Pkg-C
states when the driver is unloaded or fail to probe.

Fixes: 35b137630f08 ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323125504.2586442-6-stanislaw.gruszka@linux.intel.com

accel/ivpu: Do not use SSID 1

The SSID=1 is used by the firmware as default value in
case SSID mapping is not initialized. This allows
detecting use of miss-configured memory contexts.
The future FW versions may not allow using SSID=1.

SSID=65 is valid value, number of contexts are limited
by number of available command queues, but SSID can be
any u16 value.

Fixes: 35b137630f08 ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Co-developed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323125504.2586442-4-stanislaw.gruszka@linux.intel.com

accel/ivpu: Do not access HW registers after unbind

We should not access hardware after we unbind from the bus.

Use drm_dev_enter() / drm_dev_exit() to mark code sections where
hardware is accessed (and not already protected by other locks)
and drm_dev_unplug() to mark device is gone.

Fixes: 35b137630f08 ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323125504.2586442-2-stanislaw.gruszka@linux.intel.com

accel/ivpu: Add PM support

- Implement cold and warm firmware boot flows
- Add hang recovery support
- Add runtime power management support

Co-developed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117092723.60441-8-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Add command buffer submission logic

Each of the user contexts has two command queues, one for compute engine
and one for the copy engine. Command queues are allocated and registered
in the device when the first job (command buffer) is submitted from
the user space to the VPU device. The userspace provides a list of
GEM buffer object handles to submit to the VPU, the driver resolves
buffer handles, pins physical memory if needed, increments ref count
for each buffer and stores pointers to buffer objects in
the ivpu_job objects that track jobs submitted to the device.
The VPU signals job completion with an asynchronous message that
contains the job id passed to firmware when the job was submitted.

Currently, the driver supports simple scheduling logic
where jobs submitted from user space are immediately pushed
to the VPU device command queues. In the future, it will be
extended to use hardware base scheduling and/or drm_sched.

Co-developed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117092723.60441-7-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Implement firmware parsing and booting

Read, parse and boot VPU firmware image.

Co-developed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Co-developed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117092723.60441-6-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Add IPC driver and JSM messages

The IPC driver is used to send and receive messages to/from firmware
running on the VPU.

The only supported IPC message format is Job Submission Model (JSM)
defined in vpu_jsm_api.h header.

Co-developed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Co-developed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117092723.60441-5-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Add GEM buffer object management

Adds four types of GEM-based BOs for the VPU:
- shmem
- internal
- prime

All types are implemented as struct ivpu_bo, based on
struct drm_gem_object. VPU address is allocated when buffer is created
except for imported prime buffers that allocate it in BO_INFO IOCTL due
to missing file_priv arg in gem_prime_import callback.
Internal buffers are pinned on creation, the rest of buffers types
can be pinned on demand (in SUBMIT IOCTL).
Buffer VPU address, allocated pages and mappings are released when the
buffer is destroyed.
Eviction mechanism is planned for future versions.

Add two new IOCTLs: BO_CREATE, BO_INFO

Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117092723.60441-4-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Add Intel VPU MMU support

VPU Memory Management Unit is based on ARM MMU-600.
It allows the creation of multiple virtual address spaces for
the device and map noncontinuous host memory (there is no dedicated
memory on the VPU).

Address space is implemented as a struct ivpu_mmu_context, it has an ID,
drm_mm allocator for VPU addresses and struct ivpu_mmu_pgtable that
holds actual 3-level, 4KB page table.
Context with ID 0 (global context) is created upon driver initialization
and it's mainly used for mapping memory required to execute
the firmware.
Contexts with non-zero IDs are user contexts allocated each time
the devices is open()-ed and they map command buffers and other
workload-related memory.
Workloads executing in a given contexts have access only
to the memory mapped in this context.

This patch is has two main files:
- ivpu_mmu_context.c handles MMU page tables and memory mapping
- ivpu_mmu.c implements a driver that programs the MMU device

Co-developed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Co-developed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117092723.60441-3-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Introduce a new DRM driver for Intel VPU

VPU stands for Versatile Processing Unit and it's a CPU-integrated
inference accelerator for Computer Vision and Deep Learning
applications.

The VPU device consist of following components:
- Buttress - provides CPU to VPU integration, interrupt, frequency and
power management.
- Memory Management Unit (based on ARM MMU-600) - translates VPU to
host DMA addresses, isolates user workloads.
- RISC based microcontroller - executes firmware that provides job
execution API for the kernel-mode driver
- Neural Compute Subsystem (NCS) - does the actual work, provides
Compute and Copy engines.
- Network on Chip (NoC) - network fabric connecting all the components

This driver supports VPU IP v2.7 integrated into Intel Meteor Lake
client CPUs (14th generation).

Module sources are at drivers/accel/ivpu and module name is
"intel_vpu.ko".

This patch includes only very besic functionality:
- module, PCI device and IRQ initialization
- register definitions and low level register manipulation functions
- SET/GET_PARAM ioctls
- power up without firmware

Co-developed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117092723.60441-2-jacek.lawrynowicz@linux.intel.com