accel/habanalabs: keep explicit size of reserved memory for FW

The reserved memory for FW is currently saved in an ASIC property in
units of MB, just like the value that comes from FW.
Except the fact that it is not clear from the property's name, it means
also that a calculation to actual size is required everywhere that it is
used.
Modify the property to hold the size in bytes.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: handle reserved memory request when working with full FW

Currently the reserved memory request from FW is handled when running
with preboot only, but this request is relevant also when running with
full FW.
Modify to always handle this reservation request.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: fix error print

The unmasking is for event and it can be other event than RAZWI.

Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: modify print for skip loading linux FW to debug log

Skip loading a linux FW image into the device with the current supported
ASICs is done for test purposes only.
Moreover, for future supported ASICs it is possible that there won't be
a need to load such an image.
The print in such a case is therefore not needed in most cases, so
replace the used dev_info() with dev_dbg().

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs/gaudi2: add signed dev info uAPI

User will provide a nonce via the INFO ioctl, and will retrieve
the signed device info generated using given nonce.

Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: update device boot error check

Use a predefined mask which set the device critical boot errors.
Driver will fail and stop its loading, only upon detecting at least
one of those errors defined in this mask.

Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: update boot status print

FW shutdown preparation status was added to spec.

Signed-off-by: Ariel Suller <asuller@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: extend preboot timeout when preboot might take longer

There are cases such when FW runs MBIST, that preboot is expected to take
longer than the usual. In such cases the firmware reports status
SECURITY_READY/IN_PREBOOT and we extend the timeout waiting for it.
This is currently implemented for Gaudi2 only.

Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: move cpucp interface to linux/habanalabs

The CPUCP interface is moved to a shared folder outside of accel as
a pre-requisite to upstream the NIC drivers that will also include
this file.

Signed-off-by: David Meriin <dmeriin@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: handle f/w reserved dram space request

It is possible for FW to request reserved space in dram.
If the device supports this option, it will retrieve the size from the
f/w and will reserve it.

Currently we add the common code infrastructure to support it.

Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: dump temperature threshold boot error

Add dump of an error reported from f/w during boot time.
This error indicates a failure with setting temperature threshold.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: fix standalone preboot descriptor request

The preboot used to statically allocate memory for the comms descriptor
on the device memory when driver requested the descriptor information.
Now preboot moved to dynamic memory allocation where it wants to check
the size the driver expects vs. what the f/w expects.
Note there are no backward compatibility issues as older f/w versions
simply ignore this value.

Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: update state when loading boot fit

Any FW component we load must be followed by a corresponding state
update. However, it seems that so far we skipped doing so for the
bootfit case, so fix that.

Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: poll for device status update following WFE cmd

Currently, we rely on COMMS protocol's ack to verify that WFE command
has been acknowledged by the FW. However, this does not guarantee that
the device status has been updated.
Although unlikely, this could trigger a race since the driver expects
the device to be halted at that stage, but it might not be.
Therefore, we increase WFE's robustness by polling on the status
register that will be updated once the device is actually halted.

Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: do soft-reset using cpucp packet

This is done depending on the FW version. The cpucp method is
preferable and saves scratchpads resource.

Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: extract and save the FW's SW major/minor/sub-minor

It is not always possible to know the FW's SW version from the inner FW
version. Therefore we should extract the general SW version in addition
to the FW version and use it in functions like
'hl_is_fw_ver_below_1_9' etc.

Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: rename fw_{major/minor}_version to fw_inner_{major/minor}_ver

We later want to add fields for Firmware SW version. The current
extracted FW version is the inner FW versioning so the new name
is better and also better differentiate from the FW's SW version.

Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: add helper to extract the FW major/minor

the helper is extract_u32_until_given_char and can later be used to
also get the major/minor of the sw version.

Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: don't wait for STS_OK after sending COMMS WFE

Sending COMMS_GOTO_WFE instructs the FW's CPU to halt (WFE state).
Once sent, FW's CPU isn't expected to continue communicating with LKD.
Therefore, the stage of waiting for COMMS_STS_OK should be skipped or
else waiting for COMMS_STS_OK will simply timeout, which will trigger
unexpected behavior.

Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: improvements to FW ver extraction

1. Rename the func to hl_get_preboot_major_minor because we also set
the extracted values in hdev fields.

2. Free the allocated string in the calling function which makes more
sense

Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: change COMMS warning messages to error level

COMMS protocol is used for LKD <--> FW communication, and any
communication failure between the two might turn out to be
destructive, hence, it should be well emphasized.

Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

accel/habanalabs: fix a missing-braces compilation warning

Replace initialization of "struct cpucp_packet" from "{0} to "{}" to
avoid a "missing braces around initializer" compilation warning.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: enhance info printed on FW load errors

This commit enhances the following error messages to also provide the
type of error occurred, this in order to ease debugging of errors
detected during firmware-load.

Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: add set engines masks ASIC function

This function shall be used whenever components enable/binning masks
should be updated.

Usage is in one of the below cases:
- update user (or default) component masks
- update when getting the masks from FW (either CPUCP or COMMS)

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: move driver to accel subsystem

Now that we have a subsystem for compute accelerators, move the
habanalabs driver to it.

This patch only moves the files and fixes the Makefiles. Future
patches will change the existing code to register to the accel
subsystem and expose the accel device char files instead of the
habanalabs device char files.

Update the MAINTAINERS file to reflect this change.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>