x86/CPU/AMD: Track SNP host status with cc_platform_*()

The host SNP worthiness can determined later, after alternatives have
been patched, in snp_rmptable_init() depending on cmdline options like
iommu=pt which is incompatible with SNP, for example.

Which means that one cannot use X86_FEATURE_SEV_SNP and will need to
have a special flag for that control.

Use that newly added CC_ATTR_HOST_SEV_SNP in the appropriate places.

Move kdump_sev_callback() to its rightful place, while at it.

Fixes: 216d106c7ff7 ("x86/sev: Add SEV-SNP host initialization support")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Srikanth Aithal <sraithal@amd.com>
Link: https://lore.kernel.org/r/20240327154317.29909-6-bp@alien8.de

crypto: ccp: Add panic notifier for SEV/SNP firmware shutdown on kdump

Add a kdump safe version of sev_firmware_shutdown() and register it as a
crash_kexec_post_notifier so it will be invoked during panic/crash to do
SEV/SNP shutdown. This is required for transitioning all IOMMU pages to
reclaim/hypervisor state, otherwise re-init of IOMMU pages during
crashdump kernel boot fails and panics the crashdump kernel.

This panic notifier runs in atomic context, hence it ensures not to
acquire any locks/mutexes and polls for PSP command completion instead
of depending on PSP command completion interrupt.

[ mdr: Remove use of "we" in comments. ]

Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-21-michael.roth@amd.com

x86/sev: Introduce an SNP leaked pages list

Pages are unsafe to be released back to the page-allocator if they
have been transitioned to firmware/guest state and can't be reclaimed
or transitioned back to hypervisor/shared state. In this case, add them
to an internal leaked pages list to ensure that they are not freed or
touched/accessed to cause fatal page faults.

[ mdr: Relocate to arch/x86/virt/svm/sev.c ]

Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/20240126041126.1927228-16-michael.roth@amd.com

x86/sev: Adjust the directmap to avoid inadvertent RMP faults

If the kernel uses a 2MB or larger directmap mapping to write to an
address, and that mapping contains any 4KB pages that are set to private
in the RMP table, an RMP #PF will trigger and cause a host crash.

SNP-aware code that owns the private PFNs will never attempt such
a write, but other kernel tasks writing to other PFNs in the range may
trigger these checks inadvertently due to writing to those other PFNs
via a large directmap mapping that happens to also map a private PFN.

Prevent this by splitting any 2MB+ mappings that might end up containing
a mix of private/shared PFNs as a result of a subsequent RMPUPDATE for
the PFN/rmp_level passed in.

Another way to handle this would be to limit the directmap to 4K
mappings in the case of hosts that support SNP, but there is potential
risk for performance regressions of certain host workloads.

Handling it as-needed results in the directmap being slowly split over
time, which lessens the risk of a performance regression since the more
the directmap gets split as a result of running SNP guests, the more
likely the host is being used primarily to run SNP guests, where
a mostly-split directmap is actually beneficial since there is less
chance of TLB flushing and cpa_lock contention being needed to perform
these splits.

Cases where a host knows in advance it wants to primarily run SNP guests
and wishes to pre-split the directmap can be handled by adding
a tuneable in the future, but preliminary testing has shown this to not
provide a signficant benefit in the common case of guests that are
backed primarily by 2MB THPs, so it does not seem to be warranted
currently and can be added later if a need arises in the future.

Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/20240126041126.1927228-12-michael.roth@amd.com

x86/sev: Add helper functions for RMPUPDATE and PSMASH instruction

The RMPUPDATE instruction updates the access restrictions for a page via
its corresponding entry in the RMP Table. The hypervisor will use the
instruction to enforce various access restrictions on pages used for
confidential guests and other specialized functionality. See APM3 for
details on the instruction operations.

The PSMASH instruction expands a 2MB RMP entry in the RMP table into a
corresponding set of contiguous 4KB RMP entries while retaining the
state of the validated bit from the original 2MB RMP entry. The
hypervisor will use this instruction in cases where it needs to re-map a
page as 4K rather than 2MB in a guest's nested page table.

Add helpers to make use of these instructions.

[ mdr: add RMPUPDATE retry logic for transient FAIL_OVERLAP errors. ]

Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Link: https://lore.kernel.org/r/20240126041126.1927228-11-michael.roth@amd.com

x86/fault: Add helper for dumping RMP entries

This information will be useful for debugging things like page faults
due to RMP access violations and RMPUPDATE failures.

[ mdr: move helper to standalone patch, rework dump logic as suggested
by Boris. ]

Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-8-michael.roth@amd.com

x86/sev: Add RMP entry lookup helpers

Add a helper that can be used to access information contained in the RMP
entry corresponding to a particular PFN. This will be needed to make
decisions on how to handle setting up mappings in the NPT in response to
guest page-faults and handling things like cleaning up pages and setting
them back to the default hypervisor-owned state when they are no longer
being used for private data.

[ mdr: separate 'assigned' indicator from return code, and simplify
function signatures for various helpers. ]

Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-7-michael.roth@amd.com

x86/sev: Add SEV-SNP host initialization support

The memory integrity guarantees of SEV-SNP are enforced through a new
structure called the Reverse Map Table (RMP). The RMP is a single data
structure shared across the system that contains one entry for every 4K
page of DRAM that may be used by SEV-SNP VMs. The APM Volume 2 section
on Secure Nested Paging (SEV-SNP) details a number of steps needed to
detect/enable SEV-SNP and RMP table support on the host:

- Detect SEV-SNP support based on CPUID bit
- Initialize the RMP table memory reported by the RMP base/end MSR
registers and configure IOMMU to be compatible with RMP access
restrictions
- Set the MtrrFixDramModEn bit in SYSCFG MSR
- Set the SecureNestedPagingEn and VMPLEn bits in the SYSCFG MSR
- Configure IOMMU

RMP table entry format is non-architectural and it can vary by
processor. It is defined by the PPR document for each respective CPU
family. Restrict SNP support to CPU models/families which are compatible
with the current RMP table entry format to guard against any undefined
behavior when running on other system types. Future models/support will
handle this through an architectural mechanism to allow for broader
compatibility.

SNP host code depends on CONFIG_KVM_AMD_SEV config flag which may be
enabled even when CONFIG_AMD_MEM_ENCRYPT isn't set, so update the
SNP-specific IOMMU helpers used here to rely on CONFIG_KVM_AMD_SEV
instead of CONFIG_AMD_MEM_ENCRYPT.

Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Co-developed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Co-developed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Link: https://lore.kernel.org/r/20240126041126.1927228-5-michael.roth@amd.com