sparc64: enable HAVE_COPY_THREAD_TLS

This is part of a larger series that aims at getting rid of the
copy_thread()/copy_thread_tls() split that makes the process creation
codepaths in the kernel more convoluted and error-prone than they need
to be.
It also unblocks implementing clone3() on architectures not support
copy_thread_tls(). Any architecture that wants to implement clone3()
will need to select HAVE_COPY_THREAD_TLS and thus need to implement
copy_thread_tls(). So both goals are connected but independently
beneficial.

HAVE_COPY_THREAD_TLS means that a given architecture supports
CLONE_SETTLS and not setting it should usually mean that the
architectures doesn't implement it but that's not how things are. In
fact all architectures support CLONE_TLS it's just that they don't
follow the calling convention that HAVE_COPY_THREAD_TLS implies. That
means all architectures can be switched over to select
HAVE_COPY_THREAD_TLS. Once that is done we can remove that macro (yay,
less code), the unnecessary do_fork() export in kernel/fork.c, and also
rename copy_thread_tls() back to copy_thread(). At this point
copy_thread() becomes the main architecture specific part of process
creation but it will be the same layout and calling convention for all
architectures. (Once that is done we can probably cleanup each
copy_thread() function even more but that's for the future.)

Since sparc does support CLONE_SETTLS there's no reason to not select
HAVE_COPY_THREAD_TLS. This brings us one step closer to getting rid of
the copy_thread()/copy_thread_tls() split we still have and ultimately
the HAVE_COPY_THREAD_TLS define in general. A lot of architectures have
already converted and sparc is one of the few hat haven't yet. This also
unblocks implementing the clone3() syscall on sparc which I will follow
up later (if no one gets there before me). Once that is done we can get
of another ARCH_WANTS_* macro.

This patch just switches sparc64 over to HAVE_COPY_THREAD_TLS but not
sparc32 which will be done in the next patch. Once Any architecture that
supports HAVE_COPY_THREAD_TLS cannot call the do_fork() helper anymore.
This is fine and intended since it should be removed in favor of the
new, cleaner _do_fork() calling convention based on struct
kernel_clone_args. In fact, most architectures have already switched.
With this patch, sparc joins the other arches which can't use the
fork(), vfork(), clone(), clone3() syscalls directly and who follow the
new process creation calling convention that is based on struct
kernel_clone_args which we introduced a while back. This means less
custom assembly in the architectures entry path to set up the registers
before calling into the process creation helper and it is easier to to
support new features without having to adapt calling conventions. It
also unifies all process creation paths between fork(), vfork(),
clone(), and clone3(). (We can't fix the ABI nightmare that legacy
clone() is but we can prevent stuff like this happening in the future.)

Note that sparc can't easily call into the syscalls directly because of
its return value conventions when a new process is created which
needs to clobber the UREG_I1 register in copy_thread{_tls()} and it
needs to restore it if process creation fails. That's not a big deal
since the new process creation calling convention makes things simpler.

This removes sparc_do_fork() and replaces it with 3 clean helpers,
sparc_fork(), sparc_vfork(), and sparc_clone(). That means a little more
C code until the next patch unifies sparc 32bit and sparc64. It has the
advantage that we can remove quite a bit of assembler and it makes the
whole syscall.S process creation bits easier to read.
The follow-up patch will remove the custom sparc_do_fork() helper for
32bi sparc and move sparc_fork(), sparc_vfork(), and sparc_clone() into
a common process.c file. This allows us to remove quite a bit of
custom assembly form 32bit sparc's entry.S file too and allows to remove
even more code because now all helpers are shared between 32bit sparc
and sparc64 instead of having to maintain two separate sparc_do_fork()
implementations.

For some more context, please see:
commit 606e9ad20094f6d500166881d301f31a51bc8aa7
Merge: ac61145a725a 457677c70c76
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Sat Jan 11 15:33:48 2020 -0800

Merge tag 'clone3-tls-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

Pull thread fixes from Christian Brauner:
"This contains a series of patches to fix CLONE_SETTLS when used with
clone3().

The clone3() syscall passes the tls argument through struct clone_args
instead of a register. This means, all architectures that do not
implement copy_thread_tls() but still support CLONE_SETTLS via
copy_thread() expecting the tls to be located in a register argument
based on clone() are currently unfortunately broken. Their tls value
will be garbage.

The patch series fixes this on all architectures that currently define
__ARCH_WANT_SYS_CLONE3. It also adds a compile-time check to ensure
that any architecture that enables clone3() in the future is forced to
also implement copy_thread_tls().

My ultimate goal is to get rid of the copy_thread()/copy_thread_tls()
split and just have copy_thread_tls() at some point in the not too
distant future (Maybe even renaming copy_thread_tls() back to simply
copy_thread() once the old function is ripped from all arches). This
is dependent now on all arches supporting clone3().

While all relevant arches do that now there are still four missing:
ia64, m68k, sh and sparc. They have the system call reserved, but not
implemented. Once they all implement clone3() we can get rid of
ARCH_WANT_SYS_CLONE3 and HAVE_COPY_THREAD_TLS.

Note that in the meantime, m68k has already switched to the new calling
convention.

Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guo Ren <guoren@kernel.org>
Cc: linux-csky@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: sparclinux@vger.kernel.org
See: d95b56c77ef ("openrisc: Cleanup copy_thread_tls docs and comments")
See: 0b9f386c4be ("csky: Implement copy_thread_tls")
Link: https://lore.kernel.org/r/20200512171527.570109-2-christian.brauner@ubuntu.com

sparc: get rid of asm wrapper for nis_syscall()

just use current_pt_regs()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

sparc: get rid of memory_ordering(2) wrapper

use current_pt_regs() in it instead

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

sparc: get rid of sys_sparc_pipe() wrappers

just use current_pt_regs()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc: Fix system call tracing register handling.

A system call trace trigger on entry allows the tracing
process to inspect and potentially change the traced
process's registers.

Account for that by reloading the %g1 (syscall number)
and %i0-%i5 (syscall argument) values. We need to be
careful to revalidate the range of %g1, and reload the
system call table entry it corresponds to into %l7.

Reported-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tested-by: Mike Frysinger <vapier@gentoo.org>

sparc: hook up execveat system call

Signed-off-by: David Drysdale <drysdale@google.com>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sparc64: don't treat 64-bit syscall return codes as 32-bit

When checking a system call return code for an error,
linux_sparc_syscall was sign-extending the lower 32-bit value and
comparing it to -ERESTART_RESTARTBLOCK. lseek can return valid return
codes whose lower 32-bits alone would indicate a failure (such as 4G-1).
Use the whole 64-bit value to check for errors. Only the 32-bit path
should sign extend the lower 32-bit value.

Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Acked-by: Bob Picco <bob.picco@oracle.com>
Acked-by: Allen Pais <allen.pais@oracle.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

sparc64: Implement HAVE_CONTEXT_TRACKING

Mark the places when the system are in user or are in kernel.
This is used to make full dynticks system (tickless) --
CONFIG_NO_HZ_FULL dependence.

Signed-off-by: Kirill Tkhai <tkhai@yandex.ru>
CC: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

sparc64: Fix not SRA'ed %o5 in 32-bit traced syscall

(From v1 to v2: changed comment)

On the way linux_sparc_syscall32->linux_syscall_trace32->goto 2f,
register %o5 doesn't clear its second 32-bit.

Fix that.

Signed-off-by: Kirill Tkhai <tkhai@yandex.ru>
CC: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

sparc64: cleanup: Rename ret_from_syscall to ret_from_fork

Rename to make the function name better conform to its goal.

Signed-off-by: Kirill Tkhai <tkhai@yandex.ru>
CC: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

sparc: switch to generic sigaltstack

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

sparc64: exit_group should kill register windows just like plain exit.

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

sparc64: convert to generic execve

We still have wrappers, but nowhere near as scary as they used to be.
I'm not sure how necessary that flushw is now, TBH...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

sparc64: switch to generic kernel_execve()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

sparc64: switch to generic kernel_thread()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

sparc64: clear syscall_noerror on the entry to syscall, not on the exit

Move that sucker to just before TI_FPDEPTH and replace stb with sth in
etrap_save(). Take current_ds to its old place, so that we don't push
wsaved into TI_... flags. That allows to lose clearing syscall_noerror
on return from syscall.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

sparc64: fix ptrace interaction with force_successful_syscall_return()

we want syscall_trace_leave() called on exit from any syscall;
skipping its call in case we'd done force_successful_syscall_return()
is broken...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Revert strace hiccups fix.

This reverts commit 40138249c3b7a0762155216b963ec7fd4d09b5b4 and
ffa9009c9828db3f74178e459cfbca6e77ff5dd9.

There are problems with how the flag bytes were rearranged, in
particular we really can't move values down into the lowest
16 bits since those are used for individual state bits.

Signed-off-by: David S. Miller <davem@davemloft.net>

sparc64: Fix strace hiccups when force_successful_syscall() triggers.

When force_successful_syscall() triggers, the syscall return status
reported the ptrace applications gets garbled.

Fix this by reordering the events and tests in the ret_sys_call path.

Signed-off-by: David S. Miller <davem@davemloft.net>

sparc64: Rearrange thread info to cheaply clear syscall noerror state.

After fixing a couple of brainos, it even seems to work. What's done here
is move of ->syscall_noerror right before FPDEPTH byte in ->flags and
using sth to [%g6 + TI_SYS_NOERROR] instead of stb to [%g6 + TI_FPDEPTH] in
both branches of etrap_save. AFAICS, that ought to be solid. Again,
deciding what to do with now unused delay slot of branch on ->syscall_noerror
and dealing with the order of tests in ret_from_sys is a separate question,
but at least that way we don't have to clean ->syscall_noerror in there at
all. AFAICS, it ought to be a clear win - sth is not going to cost more than
stb on etrap_64.S side of things, and we are losing write on syscalls.S one.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

sparc64: Kill off old sys_perfctr system call and state.

People should be using the perf events interfaces, and
the way these system call facilities used the %pcr conflicts
with the usage of the NMI watchdog and perf events.

Signed-off-by: David S. Miller <davem@davemloft.net>

sparc64: Add syscall tracepoint support.

Signed-off-by: David S. Miller <davem@davemloft.net>

sparc64: Annotate sparc64 specific syscalls with SYSCALL_DEFINEx()

Signed-off-by: David S. Miller <davem@davemloft.net>

[CVE-2009-0029] Remove __attribute__((weak)) from sys_pipe/sys_pipe2

Remove __attribute__((weak)) from common code sys_pipe implemantation.
IA64, ALPHA, SUPERH (32bit) and SPARC (32bit) have own implemantations
with the same name. Just rename them.
For sys_pipe2 there is no architecture specific implementation.

Cc: Richard Henderson <rth@twiddle.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

sparc,sparc64: unify kernel/

o Move all files from sparc64/kernel/ to sparc/kernel
- rename as appropriate
o Update sparc/Makefile to the changes
o Update sparc/kernel/Makefile to include the sparc64 files

NOTE: This commit changes link order on sparc64!

Link order had to change for either of sparc32 and sparc64.
And assuming sparc64 see more testing than sparc32 change link
order on sparc64 where issues will be caught faster.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>