sparc: Use generic pci_mmap_resource_range()

The main feature of the sparc-specific implementation of
pci_mmap_resource_range() is that it allows mapping the entire PCI I/O
space for a PCI host bridge using the /proc/bus/pci interface on a bridge
device.

The generic implementation cannot do this, but it also appears that this
got broken for sparc by commit 9eff02e2042f ("PCI: check mmap range of
/proc/bus/pci files too"), which enforces that each address is part of a
BAR for kernels after 2.6.28.

Remove it all, assuming that the corresponding user space code has already
been changed to access /dev/ioport instead a long time ago. Add
pci_iobar_pfn() to make it possible to map I/O resources. This is adapted
from the powerpc version.

Link: https://lore.kernel.org/lkml/1519887203.622.3.camel@infradead.org/t/
Link: https://lore.kernel.org/r/20220715153617.3393420-2-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

PCI: Remove pci_get_legacy_ide_irq() and asm-generic/pci.h

pci_get_legacy_ide_irq() is only used on platforms that support PNP, so
many architectures define it but never use it. Replace uses of it with
ATA_PRIMARY_IRQ() and ATA_SECONDARY_IRQ(), which provide the same
functionality.

Since pci_get_legacy_ide_irq() is no longer used, remove all the
architecture-specific definitions of it as well as asm-generic/pci.h, which
only provides pci_get_legacy_ide_irq()

[bhelgaas: commit log]
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20220722214944.831438-2-shorne@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Pierre Morel <pmorel@linux.ibm.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

PCI: Convert pci_resource_to_user() to a weak function

Convert pci_resource_to_user() to a weak function so the existing
architecture-specific implementations will automatically override the
generic one. This allows us to remove HAVE_ARCH_PCI_RESOURCE_TO_USER
definitions and avoid the conditional compilation for this single function.

Link: https://lore.kernel.org/r/20190729101401.28068-1-efremov@linux.com
Link: https://lore.kernel.org/r/20190729101401.28068-2-efremov@linux.com
Link: https://lore.kernel.org/r/20190729101401.28068-3-efremov@linux.com
Link: https://lore.kernel.org/r/20190729101401.28068-4-efremov@linux.com
Link: https://lore.kernel.org/r/20190729101401.28068-5-efremov@linux.com
Link: https://lore.kernel.org/r/20190729101401.28068-6-efremov@linux.com
Signed-off-by: Denis Efremov <efremov@linux.com>
[bhelgaas: squash into one commit]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Paul Burton <paul.burton@mips.com> # MIPS

sparc: merge 32-bit and 64-bit version of pci.h

There are enough common defintions that a single header seems nicer.

Also drop the pointless <linux/dma-mapping.h> include.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Move pci_dma_* helpers to common code

For a long time all architectures implement the pci_dma_* functions using
the generic DMA API, and they all use the same header to do so.

Move this header, pci-dma-compat.h, to include/linux and include it from
the generic pci.h instead of having each arch duplicate this include.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

pci-dma: add linux/pci-dma.h to linux/pci.h

All the architectures properly set NEED_DMA_MAP_STATE now so we can safely
add linux/pci-dma.h to linux/pci.h and remove the linux/pci-dma.h
inclusion in arch's asm/pci.h

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pci-dma: sparc: use include/linux/pci-dma.h

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sparc: Use asm-generic/pci-dma-compat

This converts SPARC to use asm-generic/pci-dma-compat instead
of the homegrown mechnism.

SPARC32 has two dma_map_ops structures for pci and sbus
(removing arch/sparc/kernel/dma.c, PCI and SBUS DMA accessor).
The global 'dma_ops' is set to sbus_dma_ops and get_dma_ops()
returns pci32_dma_ops for pci devices so we can use the
appropriate dma mapping operations.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: Robert Reif <reif@earthlink.net>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
LKML-Reference: <1249872797-1314-8-git-send-email-fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

sparc, sparc64: use arch/sparc/include

The majority of this patch was created by the following script:

***
ASM=arch/sparc/include/asm
mkdir -p $ASM
git mv include/asm-sparc64/ftrace.h $ASM
git rm include/asm-sparc64/*
git mv include/asm-sparc/* $ASM
sed -ie 's/asm-sparc64/asm/g' $ASM/*
sed -ie 's/asm-sparc/asm/g' $ASM/*
***

The rest was an update of the top-level Makefile to use sparc
for header files when sparc64 is being build.
And a small fixlet to pick up the correct unistd.h from
sparc64 code.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>