#
5394f1e9 |
|
26-Feb-2024 |
Arnd Bergmann <arnd@arndb.de> |
arch: define CONFIG_PAGE_SIZE_*KB on all architectures Most architectures only support a single hardcoded page size. In order to ensure that each one of these sets the corresponding Kconfig symbols, change over the PAGE_SHIFT definition to the common one and allow only the hardware page size to be selected. Acked-by: Guo Ren <guoren@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> Acked-by: Stafford Horne <shorne@gmail.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
#
e5080a96 |
|
29-Jan-2023 |
Mike Rapoport (IBM) <rppt@kernel.org> |
mm, arch: add generic implementation of pfn_valid() for FLATMEM Every architecture that supports FLATMEM memory model defines its own version of pfn_valid() that essentially compares a pfn to max_mapnr. Use mips/powerpc version implemented as static inline as a generic implementation of pfn_valid() and drop its per-architecture definitions. [rppt@kernel.org: fix the generic pfn_valid()] Link: https://lkml.kernel.org/r/Y9lg7R1Yd931C+y5@kernel.org Link: https://lkml.kernel.org/r/20230129124235.209895-5-rppt@kernel.org Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Guo Ren <guoren@kernel.org> [csky] Acked-by: Huacai Chen <chenhuacai@loongson.cn> [LoongArch] Acked-by: Stafford Horne <shorne@gmail.com> [OpenRISC] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Reviewed-by: David Hildenbrand <david@redhat.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Cc: Brian Cain <bcain@quicinc.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Helge Deller <deller@gmx.de> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vineet Gupta <vgupta@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
#
3f407976 |
|
14-Apr-2020 |
Will Deacon <will@kernel.org> |
sparc32: mm: Change pgtable_t type to pte_t * instead of struct page * Change the 'pgtable_t' type for sparc32 so that it represents the uncached virtual address of the PTE table, rather than the underlying 'struct page'. This allows us to free page table allocations smaller than a page. Cc: "David S. Miller" <davem@davemloft.net> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8e958839 |
|
14-Apr-2020 |
Will Deacon <will@kernel.org> |
sparc32: mm: Restructure sparc32 MMU page-table layout The "SRMMU" supports 4k pages using a fixed three-level walk with a 256-entry PGD and 64-entry PMD/PTE levels. In order to fill a page with a 'pgtable_t', the SRMMU code allocates four native PTE tables into a single PTE allocation and similarly for the PMD level, leading to an array of 16 physical pointers in a 'pmd_t' This breaks the generic code which assumes READ_ONCE(*pmd) will be word sized. In a manner similar to ef22d8abd876 ("m68k: mm: Restructure Motorola MMU page-table layout"), this patch implements the native page-table setup directly. This significantly increases the page-table memory overhead, but will be addresses in a subsequent patch. Cc: "David S. Miller" <davem@davemloft.net> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c62da0c3 |
|
10-Apr-2020 |
Anshuman Khandual <anshuman.khandual@arm.com> |
mm/vma: define a default value for VM_DATA_DEFAULT_FLAGS There are many platforms with exact same value for VM_DATA_DEFAULT_FLAGS This creates a default value for VM_DATA_DEFAULT_FLAGS in line with the existing VM_STACK_DEFAULT_FLAGS. While here, also define some more macros with standard VMA access flag combinations that are used frequently across many platforms. Apart from simplification, this reduces code duplication as well. Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Salter <msalter@redhat.com> Cc: Guo Ren <guoren@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Brian Cain <bcain@codeaurora.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paulburton@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rich Felker <dalias@libc.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeff Dike <jdike@addtoit.com> Cc: Chris Zankel <chris@zankel.net> Link: http://lkml.kernel.org/r/1583391014-8170-2-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
b2441318 |
|
01-Nov-2017 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
9157259d |
|
03-Aug-2017 |
Zi Yan <zi.yan@cs.rutgers.edu> |
mm: add pmd_t initializer __pmd() to work around a GCC bug. THP migration is added but only supports x86_64 at the moment. For all other architectures, swp_entry_to_pmd() only returns a zero pmd_t. Due to a GCC zero initializer bug #53119, the standard (pmd_t){0} initializer is not accepted by all GCC versions. __pmd() is a feasible workaround. In addition, sparc32's pmd_t is an array instead of a single value, so we need (pmd_t){ {0}, } instead of (pmd_t){0}. Thus, a different __pmd() definition is needed in sparc32. Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
6e6e4187 |
|
22-Apr-2016 |
Sam Ravnborg <sam@ravnborg.org> |
sparc32: fix build with STRICT_MM_TYPECHECKS Based on recent thread on linux-arch (some weeks ago) I decided to check how much work was required to build sparc32 with STRICT_MM_TYPECHECKS enabled. The resulting binary (checked srmmu.o) was to my suprise smaller with STRICT_MM_TYPECHECKS defined, than without. As I have no working gear to test sparc32 bits at for the moment, I did not enable STRICT_MM_TYPECHECKS - but was tempeted to do so. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c966a337 |
|
26-Jul-2012 |
Sam Ravnborg <sam@ravnborg.org> |
sparc32: drop sparc_unmapped_base The base is always the same so no need to use a variable for this. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
50544bce |
|
14-May-2012 |
Sam Ravnborg <sam@ravnborg.org> |
sparc32: remove runtime btfix support - remove all uses of btfixup header - remove the btfixup header - remove the btfixup code Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
fb6f66f4 |
|
13-May-2012 |
Sam Ravnborg <sam@ravnborg.org> |
sparc32: drop btfixup in page_32.h Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
6066fc3d |
|
12-May-2012 |
Sam Ravnborg <sam@ravnborg.org> |
sparc32: drop unused type/extern Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a4b4f437 |
|
29-Dec-2011 |
Sam Ravnborg <sam@ravnborg.org> |
sparc32: fix PAGE_SIZE definition Use _AC() in definition of PAGE_SIZE so the same definition can be used in C and assembler. Also use PAGE_SIZE in definition of THREAD_SIZE. This commit kill the following comment: "I have my suspicions... -DaveM" I did not find any clue what this referred to anyway. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8654164f |
|
14-Jan-2010 |
David S. Miller <davem@davemloft.net> |
sparc32: Fix page_to_phys(). It doesn't account for phys_base like it should, fix by using page_to_pfn(). While we're here, make virt_to_page() use pfn_to_page() as well, so we consistently use the asm/memory-model.h abstractions instead of open-coding memory model assumptions. Tested-by: Kristoffer Glembo <kristoffer@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5b17e1cd |
|
13-May-2009 |
Arnd Bergmann <arnd@arndb.de> |
asm-generic: rename page.h and uaccess.h The current asm-generic/page.h only contains the get_order function, and asm-generic/uaccess.h only implements unaligned accesses. This renames the file to getorder.h and uaccess-unaligned.h to make room for new page.h and uaccess.h file that will be usable by all simple (e.g. nommu) architectures. Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
#
5110bd21 |
|
31-Aug-2008 |
Adrian Bunk <bunk@kernel.org> |
sparc: remove CONFIG_SUN4 While doing some easy cleanups on the sparc code I noticed that the CONFIG_SUN4 code seems to be worse than the rest - there were some "I don't know how it should work, but the current code definitely cannot work." places. And while I have seen people running Linux on machines like a SPARCstation 5 a few years ago I don't recall having seen sun4 machines, even less ones running Linux. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a439fe51 |
|
27-Jul-2008 |
Sam Ravnborg <sam@ravnborg.org> |
sparc, sparc64: use arch/sparc/include The majority of this patch was created by the following script: *** ASM=arch/sparc/include/asm mkdir -p $ASM git mv include/asm-sparc64/ftrace.h $ASM git rm include/asm-sparc64/* git mv include/asm-sparc/* $ASM sed -ie 's/asm-sparc64/asm/g' $ASM/* sed -ie 's/asm-sparc/asm/g' $ASM/* *** The rest was an update of the top-level Makefile to use sparc for header files when sparc64 is being build. And a small fixlet to pick up the correct unistd.h from sparc64 code. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|