sh: add the sh_ prefix to early platform symbols

Old early platform device support is now sh-specific. Before moving on
to implementing new early platform framework based on real platform
devices, prefix all early platform symbols with 'sh_'.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Rich Felker <dalias@libc.org>
Link: https://lore.kernel.org/r/20191003092913.10731-3-brgl@bgdev.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: move the early platform device support to arch/sh

SuperH is the only user of the current implementation of early platform
device support. We want to introduce a more robust approach to early
probing. As the first step - move all the current early platform code
to arch/sh.

In order not to export internal drivers/base functions to arch code for
this temporary solution - copy the two needed routines for driver
matching from drivers/base/platform.c to arch/sh/drivers/platform_early.c.

Also: call early_platform_cleanup() from subsys_initcall() so that it's
called after all early devices are probed.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Rich Felker <dalias@libc.org>
Link: https://lore.kernel.org/r/20191003092913.10731-2-brgl@bgdev.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sh: sh4a: convert to SPDX identifiers

Update license to use SPDX-License-Identifier instead of verbose license
text.

Link: http://lkml.kernel.org/r/878t14csxy.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sh: Don't set the sh-sci pdata UPF_BOOT_AUTOCONF flags

The flag is set by the driver internally, don't set it in platform data.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sh: Don't set sh-sci pdata scscr TE and RE bits

The bits are set by the driver internally, don't set them in platform
data.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sh: Switch to new style TMU device

The TMU (Timer Unit) driver implements a new style of platform data that
handles the timer as a single device with multiple channel. Switch from
the old-style platform data to the new-style platform data.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

sh: Don't set plat_sci_port scbrr_algo_id field

The field will be removed from the sh-sci driver. Don't set it and let
the driver handle baud rate calculation internally.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

sh: Declare SCIF register base and IRQ as resources

Passing the register base address and IRQ through platform data is
deprecated. Use resources instead.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

sh: sh7770 evt2irq migration.

Migrate SH7770 to evt2irq() backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: sh4a: Change the specification method of IRQ to SCIx_IRQ_MUXED

Some SCIF devices specify the same IRQ. We can use SCIx_IRQ_MUXED for this.
And change use to evt2irq(), without specifying the value of IRQ directly.
This is correction to the SH4A series.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: Kill off timer clock strings for legacy CPG parts.

Now with the lookup aliases in place there is no longer any need to
provide the clock string, kill it off for all legacy CPG CPUs.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: Kill off all timer name clobbering.

Now that dev_name() can be used early, we no longer require a static
string. Kill off all of the superfluous timer names.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: Mass ctrl_in/outX to __raw_read/writeX conversion.

The old ctrl in/out routines are non-portable and unsuitable for
cross-platform use. While drivers/sh has already been sanitized, there
is still quite a lot of code that is not. This converts the arch/sh/ bits
over, which permits us to flag the routines as deprecated whilst still
building with -Werror for the architecture code, and to ensure that
future users are not added.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: sh4a scif pdata (sh7757/sh7763/sh7770/sh7780/sh7785/sh7786/x3)

This patch breaks out the sh4a scif serial port platform
data from a shared platform device to one platform
device per port. Also, add serial ports to the list of
early platform devices.

All sh4a except SuperH Mobile processors are modified by
this patch.

While at it, sh7757 gets early platform device support.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: convert processor device setup functions to arch_initcall()

Convert the processor platform device setup
functions from __initcall() and sometimes
device_initcall() to arch_initcall().

This makes sure that the platform devices are
registered a bit earlier so the devices are
available when drivers register using initcall
levels earlier than device_initcall().

A good example is platform devices needed by
i2c-sh_mobile.c which registers a bit earlier
using subsys_initcall().

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: convert processor device setup functions to arch_initcall()

Convert the processor platform device setup
functions from __initcall() and sometimes
device_initcall() to arch_initcall().

This makes sure that the platform devices are
registered a bit earlier so the devices are
available when drivers register using initcall
levels earlier than device_initcall().

A good example is platform devices needed by
i2c-sh_mobile.c which registers a bit earlier
using subsys_initcall().

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

serial: sh-sci: Move SCBRR calculation algo in to platform data.

This permits each port to select its own SCBRR calculation algorithm,
rather than having it all ifdef'ed in the header. There are presently
only 5 different variations that all parts fall under.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

serial: sh-sci: Move SCSCR_INIT in to platform data.

This moves all of the SCSCR_INIT definitions in to the platform data,
for future consolidation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: intc tables for sh7770

This patch adds INTC tables for sh7770, thanks
goes to Paul for the first prototype version.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: clkfwk: module_clk -> peripheral_clk rename.

For consistenct naming, and to allow us to fix up some confusion in the
SH-Mobile clock framework, amongst other places.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: TMU platform data for sh7770

This patch adds TMU platform data for sh7770. Both clockevent
and clocksource support is enabled.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: Hook up the rest of the SH7770 serial ports.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

serial: Move asm-sh/sci.h to linux/serial_sci.h.

This header is needed on other architectures as well (namely h8300),
which currently fails to build without this in place. Rather than
duplicating the port definition completely there, just move this to a
common location instead.

This should get h8300 working again for 2.6.25, in addition to the
changes already pushed by Sato-san in -rc2.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: INTC stubs for SH7343 and SH7770 builds.

Get the SH7343 and SH7770 stuff linking again. Both of these still
require proper INTC support.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: SH-MobileR SH7722 CPU support.

This adds CPU support for the SH7722.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>