KVM: s390: Refactor kvm_is_error_gpa() into kvm_is_gpa_in_memslot()

Rename kvm_is_error_gpa() to kvm_is_gpa_in_memslot() and invert the
polarity accordingly in order to (a) free up kvm_is_error_gpa() to match
with kvm_is_error_{hva,page}(), and (b) to make it more obvious that the
helper is doing a memslot lookup, i.e. not simply checking for INVALID_GPA.

No functional change intended.

Link: https://lore.kernel.org/r/20240215152916.1158-9-paul@xen.org
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: s390: fix cc for successful PQAP

The various errors that are possible when processing a PQAP
instruction (the absence of a driver hook, an error FROM that
hook), all correctly set the PSW condition code to 3. But if
that processing works successfully, CC0 needs to be set to
convey that everything was fine.

Fix the check so that the guest can examine the condition code
to determine whether GPR1 has meaningful data.

Fixes: e5282de93105 ("s390: ap: kvm: add PQAP interception for AQIC")
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20231201181657.1614645-1-farman@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20231201181657.1614645-1-farman@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>

s390: use control register bit defines

Use control register bit defines instead of plain numbers where
possible.

Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390/ctlreg: add local and system prefix to some functions

Add local and system prefix to some functions to clarify they change
control register contents on either the local CPU or the on all CPUs.

This results in the following API:

Two defines which load and save multiple control registers.
The defines correlate with the following C prototypes:

void __local_ctl_load(unsigned long *, unsigned int cr_low, unsigned int cr_high);
void __local_ctl_store(unsigned long *, unsigned int cr_low, unsigned int cr_high);

Two functions which locally set or clear one bit for a specified
control register:

void local_ctl_set_bit(unsigned int cr, unsigned int bit);
void local_ctl_clear_bit(unsigned int cr, unsigned int bit);

Two functions which set or clear one bit for a specified control
register on all CPUs:

void system_ctl_set_bit(unsigned int cr, unsigned int bit);
void system_ctl_clear_bit(unsigend int cr, unsigned int bit);

Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390: include linux/io.h instead of asm/io.h

Include linux/io.h instead of asm/io.h everywhere. linux/io.h includes
asm/io.h, so this shouldn't cause any problems. Instead this might help for
some randconfig build errors which were reported due to some undefined io
related functions.

Also move the changed include so it stays grouped together with other
includes from the same directory.

For ctcm_mpc.c also remove not needed comments (actually questions).

Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

KVM: s390: sida: sort out physical vs virtual pointers usage

All callers of the sida_origin() macro actually expected a virtual
address, so rename it to sida_addr() and hand out a virtual address.

At some places, the macro wasn't used, potentially creating problems
if the sida size ever becomes nonzero (not currently the case), so let's
start using it everywhere now while at it.

Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20221020143159.294605-5-nrb@linux.ibm.com
Message-Id: <20221020143159.294605-5-nrb@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>

KVM: s390: guest support for topology function

We report a topology change to the guest for any CPU hotplug.

The reporting to the guest is done using the Multiprocessor
Topology-Change-Report (MTCR) bit of the utility entry in the guest's
SCA which will be cleared during the interpretation of PTF.

On every vCPU creation we set the MCTR bit to let the guest know the
next time it uses the PTF with command 2 instruction that the
topology changed and that it should use the STSI(15.1.x) instruction
to get the topology details.

STSI(15.1.x) gives information on the CPU configuration topology.
Let's accept the interception of STSI with the function code 15 and
let the userland part of the hypervisor handle it when userland
supports the CPU Topology facility.

Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220714101824.101601-2-pmorel@linux.ibm.com
Message-Id: <20220714101824.101601-2-pmorel@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>

KVM: s390: Cleanup ipte lock access and SIIF facility checks

We can check if SIIF is enabled by testing the sclp_info struct
instead of testing the sie control block eca variable as that
facility is always enabled if available.

Also let's cleanup all the ipte related struct member accesses
which currently happen by referencing the KVM struct via the
VCPU struct.
Making the KVM struct the parameter to the ipte_* functions
removes one level of indirection which makes the code more readable.

Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Link: https://lore.kernel.org/all/20220711084148.25017-2-pmorel@linux.ibm.com/
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>

s390/ptrace: move short psw definitions to ptrace header file

The short psw definitions are contained in compat header files, however
short psws are not compat specific. Therefore move the definitions to
ptrace header file. This also gets rid of a compat header include in kvm
code.

Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

KVM: s390x: fix SCK locking

When handling the SCK instruction, the kvm lock is taken, even though
the vcpu lock is already being held. The normal locking order is kvm
lock first and then vcpu lock. This is can (and in some circumstances
does) lead to deadlocks.

The function kvm_s390_set_tod_clock is called both by the SCK handler
and by some IOCTLs to set the clock. The IOCTLs will not hold the vcpu
lock, so they can safely take the kvm lock. The SCK handler holds the
vcpu lock, but will also somehow need to acquire the kvm lock without
relinquishing the vcpu lock.

The solution is to factor out the code to set the clock, and provide
two wrappers. One is called like the original function and does the
locking, the other is called kvm_s390_try_set_tod_clock and uses
trylock to try to acquire the kvm lock. This new wrapper is then used
in the SCK handler. If locking fails, -EAGAIN is returned, which is
eventually propagated to userspace, thus also freeing the vcpu lock and
allowing for forward progress.

This is not the most efficient or elegant way to solve this issue, but
the SCK instruction is deprecated and its performance is not critical.

The goal of this patch is just to provide a simple but correct way to
fix the bug.

Fixes: 6a3f95a6b04c ("KVM: s390: Intercept SCK instruction")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Link: https://lore.kernel.org/r/20220301143340.111129-1-imbrenda@linux.ibm.com
Cc: stable@vger.kernel.org
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>

KVM: s390: handle_tprot: Honor storage keys

Use the access key operand to check for key protection when
translating guest addresses.
Since the translation code checks for accessing exceptions/error hvas,
we can remove the check here and simplify the control flow.
Keep checking if the memory is read-only even if such memslots are
currently not supported.

handle_tprot was the last user of guest_translate_address,
so remove it.

Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20220211182215.2730017-4-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>

KVM: s390: Fix handle_sske page fault handling

If handle_sske cannot set the storage key, because there is no
page table entry or no present large page entry, it calls
fixup_user_fault.
However, currently, if the call succeeds, handle_sske returns
-EAGAIN, without having set the storage key.
Instead, retry by continue'ing the loop without incrementing the
address.
The same issue in handle_pfmf was fixed by
a11bdb1a6b78 ("KVM: s390: Fix pfmf and conditional skey emulation").

Fixes: bd096f644319 ("KVM: s390: Add skey emulation fault handling")
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20211022152648.26536-1-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

s390/vfio-ap: r/w lock for PQAP interception handler function pointer

The function pointer to the interception handler for the PQAP instruction
can get changed during the interception process. Let's add a
semaphore to struct kvm_s390_crypto to control read/write access to the
function pointer contained therein.

The semaphore must be locked for write access by the vfio_ap device driver
when notified that the KVM pointer has been set or cleared. It must be
locked for read access by the interception framework when the PQAP
instruction is intercepted.

Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Link: https://lore.kernel.org/r/20210823212047.1476436-2-akrowiak@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

KVM: s390: Add memcg accounting to KVM allocations

Almost all kvm allocations in the s390x KVM code can be attributed to
the process that triggers the allocation (in other words, no global
allocation for other guests). This will help the memcg controller to
make the right decisions.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>

mm/gup: remove task_struct pointer for all gup code

After the cleanup of page fault accounting, gup does not need to pass
task_struct around any more. Remove that parameter in the whole gup
stack.

Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Link: http://lkml.kernel.org/r/20200707225021.200906-26-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: remove unneeded includes of <asm/pgalloc.h>

Patch series "mm: cleanup usage of <asm/pgalloc.h>"

Most architectures have very similar versions of pXd_alloc_one() and
pXd_free_one() for intermediate levels of page table. These patches add
generic versions of these functions in <asm-generic/pgalloc.h> and enable
use of the generic functions where appropriate.

In addition, functions declared and defined in <asm/pgalloc.h> headers are
used mostly by core mm and early mm initialization in arch and there is no
actual reason to have the <asm/pgalloc.h> included all over the place.
The first patch in this series removes unneeded includes of
<asm/pgalloc.h>

In the end it didn't work out as neatly as I hoped and moving
pXd_alloc_track() definitions to <asm-generic/pgalloc.h> would require
unnecessary changes to arches that have custom page table allocations, so
I've decided to move lib/ioremap.c to mm/ and make pgalloc-track.h local
to mm/.

This patch (of 8):

In most cases <asm/pgalloc.h> header is required only for allocations of
page table memory. Most of the .c files that include that header do not
use symbols declared in <asm/pgalloc.h> and do not require that header.

As for the other header files that used to include <asm/pgalloc.h>, it is
possible to move that include into the .c file that actually uses symbols
from <asm/pgalloc.h> and drop the include from the header file.

The process was somewhat automated using

sed -i -E '/[<"]asm\/pgalloc\.h/d' \
$(grep -L -w -f /tmp/xx \
$(git grep -E -l '[<"]asm/pgalloc\.h'))

where /tmp/xx contains all the symbols defined in
arch/*/include/asm/pgalloc.h.

[rppt@linux.ibm.com: fix powerpc warning]

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200627143453.31835-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200627143453.31835-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mmap locking API: convert mmap_sem comments

Convert comments that reference mmap_sem to reference mmap_lock instead.

[akpm@linux-foundation.org: fix up linux-next leftovers]
[akpm@linux-foundation.org: s/lockaphore/lock/, per Vlastimil]
[akpm@linux-foundation.org: more linux-next fixups, per Michel]

Signed-off-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Liam Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ying Han <yinghan@google.com>
Link: http://lkml.kernel.org/r/20200520052908.204642-13-walken@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mmap locking API: use coccinelle to convert mmap_sem rwsem call sites

This change converts the existing mmap_sem rwsem calls to use the new mmap
locking API instead.

The change is generated using coccinelle with the following rule:

// spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir .

@@
expression mm;
@@
(
-init_rwsem
+mmap_init_lock
|
-down_write
+mmap_write_lock
|
-down_write_killable
+mmap_write_lock_killable
|
-down_write_trylock
+mmap_write_trylock
|
-up_write
+mmap_write_unlock
|
-downgrade_write
+mmap_write_downgrade
|
-down_read
+mmap_read_lock
|
-down_read_killable
+mmap_read_lock_killable
|
-down_read_trylock
+mmap_read_trylock
|
-up_read
+mmap_read_unlock
)
-(&mm->mmap_sem)
+(mm)

Signed-off-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ying Han <yinghan@google.com>
Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: reorder includes after introduction of linux/pgtable.h

The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes. Fix this up with the aid of
the below script and manual adjustments here and there.

import sys
import re

if len(sys.argv) is not 3:
print "USAGE: %s <file> <header>" % (sys.argv[0])
sys.exit(1)

hdr_to_move="#include <linux/%s>" % sys.argv[2]
moved = False
in_hdrs = False

with open(sys.argv[1], "r") as f:
lines = f.readlines()
for _line in lines:
line = _line.rstrip('
')
if line == hdr_to_move:
continue
if line.startswith("#include <linux/"):
in_hdrs = True
elif not moved and in_hdrs:
moved = True
print hdr_to_move
print line

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: introduce include/linux/pgtable.h

The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.

Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

KVM: s390: Remove false WARN_ON_ONCE for the PQAP instruction

In LPAR we will only get an intercept for FC==3 for the PQAP
instruction. Running nested under z/VM can result in other intercepts as
well as ECA_APIE is an effective bit: If one hypervisor layer has
turned this bit off, the end result will be that we will get intercepts for
all function codes. Usually the first one will be a query like PQAP(QCI).
So the WARN_ON_ONCE is not right. Let us simply remove it.

Cc: Pierre Morel <pmorel@linux.ibm.com>
Cc: Tony Krowiak <akrowiak@linux.ibm.com>
Cc: stable@vger.kernel.org # v5.3+
Fixes: e5282de93105 ("s390: ap: kvm: add PQAP interception for AQIC")
Link: https://lore.kernel.org/kvm/20200505083515.2720-1-borntraeger@de.ibm.com
Reported-by: Qian Cai <cailca@icloud.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: protvirt: STSI handling

Save response to sidad and disable address checking for protected
guests.

Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
[borntraeger@de.ibm.com: patch merging, splitting, fixing]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

s390: ap: kvm: add PQAP interception for AQIC

We prepare the interception of the PQAP/AQIC instruction for
the case the AQIC facility is enabled in the guest.

First of all we do not want to change existing behavior when
intercepting AP instructions without the SIE allowing the guest
to use AP instructions.

In this patch we only handle the AQIC interception allowed by
facility 65 which will be enabled when the complete interception
infrastructure will be present.

We add a callback inside the KVM arch structure for s390 for
a VFIO driver to handle a specific response to the PQAP
instruction with the AQIC command and only this command.

But we want to be able to return a correct answer to the guest
even there is no VFIO AP driver in the kernel.
Therefor, we inject the correct exceptions from inside KVM for the
case the callback is not initialized, which happens when the vfio_ap
driver is not loaded.

We do consider the responsibility of the driver to always initialize
the PQAP callback if it defines queues by initializing the CRYCB for
a guest.
If the callback has been setup we call it.
If not we setup an answer considering that no queue is available
for the guest when no callback has been setup.

Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Acked-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

KVM: s390: Fix pfmf and conditional skey emulation

We should not return with a lock.
We also have to increase the address when we do page clearing.

Fixes: bd096f644319 ("KVM: s390: Add skey emulation fault handling")
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20180830081355.59234-1-frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: Beautify skey enable check

Let's introduce an explicit check if skeys have already been enabled
for the vcpu, so we don't have to check the mm context if we don't have
the storage key facility.

This lets us check for enablement without having to take the mm
semaphore and thus speedup skey emulation.

Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: Add skey emulation fault handling

When doing skey emulation for huge guests, we now need to fault in
pmds, as we don't have PGSTES anymore to store them when we do not
have valid table entries.

Signed-off-by: Janosch Frank <frankja@linux.ibm.com>

KVM: s390: Fix storage attributes migration with memory slots

This is a fix for several issues that were found in the original code
for storage attributes migration.

Now no bitmap is allocated to keep track of dirty storage attributes;
the extra bits of the per-memslot bitmap that are always present anyway
are now used for this purpose.

The code has also been refactored a little to improve readability.

Fixes: 190df4a212a ("KVM: s390: CMMA tracking, ESSA emulation, migration mode")
Fixes: 4036e3874a1 ("KVM: s390: ioctls to get and set guest storage attributes")
Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Message-Id: <1525106005-13931-3-git-send-email-imbrenda@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: Replace clear_user with kvm_clear_guest

kvm_clear_guest also does the dirty tracking for us, which we want to
have.

Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: Add storage key facility interpretation control

Up to now we always expected to have the storage key facility
available for our (non-VSIE) KVM guests. For huge page support, we
need to be able to disable it, so let's introduce that now.

We add the use_skf variable to manage KVM storage key facility
usage. Also we rename use_skey in the mm context struct to uses_skeys
to make it more clear that it is an indication that the vm actively
uses storage keys.

Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

compat: Move compat_timespec/ timeval to compat_time.h

All the current architecture specific defines for these
are the same. Refactor these common defines to a common
header file.

The new common linux/compat_time.h is also useful as it
will eventually be used to hold all the defines that
are needed for compat time types that support non y2038
safe types. New architectures need not have to define these
new types as they will only use new y2038 safe syscalls.
This file can be deleted after y2038 when we stop supporting
non y2038 safe syscalls.

The patch also requires an operation similar to:

git grep "asm/compat\.h" | cut -d ":" -f 1 | xargs -n 1 sed -i -e "s%asm/compat.h%linux/compat.h%g"

Cc: acme@kernel.org
Cc: benh@kernel.crashing.org
Cc: borntraeger@de.ibm.com
Cc: catalin.marinas@arm.com
Cc: cmetcalf@mellanox.com
Cc: cohuck@redhat.com
Cc: davem@davemloft.net
Cc: deller@gmx.de
Cc: devel@driverdev.osuosl.org
Cc: gerald.schaefer@de.ibm.com
Cc: gregkh@linuxfoundation.org
Cc: heiko.carstens@de.ibm.com
Cc: hoeppner@linux.vnet.ibm.com
Cc: hpa@zytor.com
Cc: jejb@parisc-linux.org
Cc: jwi@linux.vnet.ibm.com
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-s390@vger.kernel.org
Cc: mark.rutland@arm.com
Cc: mingo@redhat.com
Cc: mpe@ellerman.id.au
Cc: oberpar@linux.vnet.ibm.com
Cc: oprofile-list@lists.sf.net
Cc: paulus@samba.org
Cc: peterz@infradead.org
Cc: ralf@linux-mips.org
Cc: rostedt@goodmis.org
Cc: rric@kernel.org
Cc: schwidefsky@de.ibm.com
Cc: sebott@linux.vnet.ibm.com
Cc: sparclinux@vger.kernel.org
Cc: sth@linux.vnet.ibm.com
Cc: ubraun@linux.vnet.ibm.com
Cc: will.deacon@arm.com
Cc: x86@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: James Hogan <jhogan@kernel.org>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

KVM: s390: Refactor host cmma and pfmfi interpretation controls

use_cmma in kvm_arch means that the KVM hypervisor is allowed to use
cmma, whereas use_cmma in the mm context means cmm has been used before.
Let's rename the context one to uses_cmm, as the vm does use
collaborative memory management but the host uses the cmm assist
(interpretation facility).

Also let's introduce use_pfmfi, so we can remove the pfmfi disablement
when we activate cmma and rather not activate it in the first place.

Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Message-Id: <1518779775-256056-2-git-send-email-frankja@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: provide only a single function for setting the tod (fix SCK)

Right now, SET CLOCK called in the guest does not properly take care of
the epoch index, as the call goes via the old kvm_s390_set_tod_clock()
interface. So the epoch index is neither reset to 0, if required, nor
properly set to e.g. 0xff on negative values.

Fix this by providing a single kvm_s390_set_tod_clock() function. Move
Multiple-epoch facility handling into it.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180207114647.6220-3-david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: 8fa1696ea781 ("KVM: s390: Multiple Epoch Facility support")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: use switch vs jump table in priv.c

Instead of having huge jump tables for function selection,
let's use normal switch/case statements for the instruction
handlers in priv.c

This allows the compiler to make the right decision depending
on the situation (e.g. avoid jump-tables for thunks).

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: introduce and use kvm_s390_test_cpuflags()

Use it just like kvm_s390_set_cpuflags() and kvm_s390_clear_cpuflags().

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180123170531.13687-5-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: introduce and use kvm_s390_clear_cpuflags()

Use it just like kvm_s390_set_cpuflags().

Suggested-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180123170531.13687-4-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: add vcpu stat counters for many instruction

The overall instruction counter is larger than the sum of the
single counters. We should try to catch all instruction handlers
to make this match the summary counter.
Let us add sck,tb,sske,iske,rrbe,tb,tpi,tsch,lpsw,pswe....
and remove other unused ones.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>

KVM: s390: prevent buffer overrun on memory hotplug during migration

We must not go beyond the pre-allocated buffer. This can happen when
a new memory slot is added during migration.

Reported-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: stable@vger.kernel.org # 4.13+
Fixes: 190df4a212a7 (KVM: s390: CMMA tracking, ESSA emulation, migration mode)
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>

KVM: s390: Fix skey emulation permission check

All skey functions call skey_check_enable at their start, which checks
if we are in the PSTATE and injects a privileged operation exception
if we are.

Unfortunately they continue processing afterwards and perform the
operation anyhow as skey_check_enable does not deliver an error if the
exception injection was successful.

Let's move the PSTATE check into the skey functions and exit them on
such an occasion, also we now do not enable skey handling anymore in
such a case.

Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: a7e19ab ("KVM: s390: handle missing storage-key facility")
Cc: <stable@vger.kernel.org> # v4.8+
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: Remove redundant license text

Now that the SPDX tag is in all arch/s390/kvm/ files, that identifies
the license in a specific and legally-defined manner. So the extra GPL
text wording can be removed as it is no longer needed at all.

This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.

No copyright headers or other non-license-description text was removed.

Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <20171124140043.10062-9-gregkh@linuxfoundation.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: add SPDX identifiers to the remaining files

It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.

Update the arch/s390/kvm/ files with the correct SPDX license
identifier based on the license text in the file itself. The SPDX
identifier is a legally binding shorthand, which can be used instead of
the full boiler plate text.

This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.

Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <20171124140043.10062-3-gregkh@linuxfoundation.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: expose no-DAT to guest and migration support

The STFLE bit 147 indicates whether the ESSA no-DAT operation code is
valid, the bit is not normally provided to the host; the host is
instead provided with an SCLP bit that indicates whether guests can
support the feature.

This patch:
* enables the STFLE bit in the guest if the corresponding SCLP bit is
present in the host.
* adds support for migrating the no-DAT bit in the PGSTEs
* fixes the software interpretation of the ESSA instruction that is
used when migrating, both for the new operation code and for the old
"set stable", as per specifications.

Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: use new mm defines instead of magic values

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

KVM: s390: CMMA tracking, ESSA emulation, migration mode

* Add a migration state bitmap to keep track of which pages have dirty
CMMA information.
* Disable CMMA by default, so we can track if it's used or not. Enable
it on first use like we do for storage keys (unless we are doing a
migration).
* Creates a VM attribute to enter and leave migration mode.
* In migration mode, CMMA is disabled in the SIE block, so ESSA is
always interpreted and emulated in software.
* Free the migration state on VM destroy.

Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

s390: rename struct psw_bits members

Rename a couple of the struct psw_bits members so it is more obvious
for what they are good. Initially I thought using the single character
names from the PoP would be sufficient and obvious, but admittedly
that is not true.

The current implementation is not easy to use, if one has to look into
the source file to figure out which member represents the 'per' bit
(which is the 'r' member).

Therefore rename the members to sane names that are identical to the
uapi psw mask defines:

r -> per
i -> io
e -> ext
t -> dat
m -> mcheck
w -> wait
p -> pstate

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390: rename psw_bits enums

The address space enums that must be used when modifying the address
space part of a psw with the psw_bits() macro can easily be confused
with the psw defines that are used to mask and compare directly the
mask part of a psw.
We have e.g. PSW_AS_PRIMARY vs PSW_ASC_PRIMARY.

To avoid confusion rename the PSW_AS_* enums to PSW_BITS_AS_*.

In addition also rename the PSW_AMODE_* enums, so they also follow the
same naming scheme: PSW_BITS_AMODE_*.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

KVM: s390: Support keyless subset guest mode

If the KSS facility is available on the machine, we also make it
available for our KVM guests.

The KSS facility bypasses storage key management as long as the guest
does not issue a related instruction. When that happens, the control is
returned to the host, which has to turn off KSS for a guest vcpu
before retrying the instruction.

Signed-off-by: Corey S. McQuay <csmcquay@linux.vnet.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: gs support for kvm guests

This patch adds guarded storage support for KVM guest. We need to
setup the necessary control blocks, the kvm_run structure for the
new registers, the necessary wrappers for VSIE, as well as the
machine check save areas.
GS is enabled lazily and the register saving and reloading is done in
KVM code. As this feature adds new content for migration, we provide
a new capability for enablement (KVM_CAP_S390_GS).

Signed-off-by: Fan Zhang <zhangfan@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: use defines for execution controls

Let's replace the bitmasks by defines. Reconstructed from code, comments
and commit messages.

Tried to keep the defines short and map them to feature names. In case
they don't completely map to features, keep them in the stye of ICTL
defines.

This effectively drops all "U" from the existing numbers. I think this
should be fine (as similarly done for e.g. ICTL defines).

I am not 100% sure about the ECA_MVPGI and ECA_PROTEXCI bits as they are
always used in pairs.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170313104828.13362-1-david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[some renames, add one missing place]

KVM: s390: Handle sthyi also for instruction intercept

Right now we handle the STHYI only via the operation exception intercept
(illegal instruction). If hardware ever decides to provide an
instruction intercept for STHYI, we should handle that as well.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: log runtime instrumentation enablement

We handle runtime instrumentation enablement either lazy or via
sync_regs on migration. Make sure to add a debug log entry for that
per CPU on the first occurrence.

Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

sched/headers: Prepare to remove the <linux/mm_types.h> dependency from <linux/sched.h>

Update code that relied on sched.h including various MM types for them.

This will allow us to remove the <linux/mm_types.h> include from <linux/sched.h>.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

KVM: s390: Get rid of ar_t

sparse with __CHECK_ENDIAN__ shows that ar_t was never properly
used across KVM on s390. We can now:
- fix all places
- do not make ar_t special
Since ar_t is just used as a register number (no endianness issues
for u8), and all other register numbers are also just plain int
variables, let's just use u8, which matches the __u8 in the userspace
ABI for the memop ioctl.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>

s390: remove couple of unneeded semicolons

Remove a couple of unneeded semicolons. This is just to reduce the
noise that the coccinelle static code checker generates.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

KVM: s390: lazy enable RI

Only enable runtime instrumentation if the guest issues an RI related
instruction or if userspace changes the riccb to a valid state.
This makes entry/exit a tiny bit faster.

Initial patch by Christian Borntraeger
Signed-off-by: Fan Zhang <zhangfan@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: let ptff intercepts result in cc=3

We don't emulate ptff subfunctions, therefore react on any attempt of
execution by setting cc=3 (Requested function not available).

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: vsie: initial support for nested virtualization

This patch adds basic support for nested virtualization on s390x, called
VSIE (virtual SIE) and allows it to be used by the guest if the necessary
facilities are supported by the hardware and enabled for the guest.

In order to make this work, we have to shadow the sie control block
provided by guest 2. In order to gain some performance, we have to
reuse the same shadow blocks as good as possible. For now, we allow
as many shadow blocks as we have VCPUs (that way, every VCPU can run the
VSIE concurrently).

We have to watch out for the prefix getting unmapped out of our shadow
gmap and properly get the VCPU out of VSIE in that case, to fault the
prefix pages back in. We use the PROG_REQUEST bit for that purpose.

This patch is based on an initial prototype by Tobias Elpelt.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: handle missing storage-key facility

Without the storage-key facility, SIE won't interpret SSKE, ISKE and
RRBE for us. So let's add proper interception handlers that will be called
if lazy sske cannot be enabled.

Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: trace and count all skey intercepts

Let's trace and count all skey handling operations, even if lazy skey
handling was already activated. Also, don't enable lazy skey handling if
anything went wrong while enabling skey handling for the SIE.

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: pfmf: handle address overflows

In theory, end could always end up being < start, if overflowing to 0.
Although very unlikely for now, let's just fix it.

Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: pfmf: support conditional-sske facility

We already indicate that facility but don't implement it in our pfmf
interception handler. Let's add a new storage key handling function for
conditionally setting the guest storage key.

As we will reuse this function later on, let's directly implement returning
the old key via parameter and indicating if any change happened via rc.

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: pfmf: take care of amode when setting reg2

Depending on the addressing mode, we must not overwrite bit 0-31 of the
register. In addition, 24 bit and 31 bit have to set certain bits to 0,
which is guaranteed by converting the end address to an effective
address.

Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: pfmf: MR and MC are ignored without CSSKE

These two bits are simply ignored when the conditional-SSKE facility is
not installed.

Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: pfmf: fix end address calculation

The current calculation is wrong if absolute != real address. Let's just
calculate the start address for 4k frames upfront. Otherwise, the
calculated end address will be wrong, resulting in wrong memory
location/storage keys getting touched.

To keep low-address protection working (using the effective address),
we have to move the check.

Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

s390/mm: set and get guest storage key mmap locking

Move the mmap semaphore locking out of set_guest_storage_key
and get_guest_storage_key. This makes the two functions more
like the other ptep_xxx operations and allows to avoid repeated
semaphore operations if multiple keys are read or written.

Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: cleanup cpuid handling

We only have one cpuid for all VCPUs, so let's directly use the one in the
cpu model. Also always store it directly as u64, no need for struct cpuid.

Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: support NQ only if the facility is enabled for the guest

While we can not fully fence of the Nonquiescing Key-Setting facility,
we should as try our best to hide it.

Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: cmma: don't check entry content

We should never inject an exception after we manually rewound the PSW
(to retry the ESSA instruction in this case). This will mess up the PSW.
So this never worked and therefore never really triggered.

Looking at the details, we don't even have to perform any validity checks.
1. Bits 52-63 of an entry are stored as 0 by the hardware.
2. We are dealing with absolute addresses but only check for the prefix
starting at address 0. This isn't correct and doesn't make much sense,
cpus could still zap the prefix of other cpus. But as prefix pages
cannot be swapped out without a notifier being called for the affected
VCPU, a zap can never remove a protected prefix.

Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

s390/mm: split arch/s390/mm/pgtable.c

The pgtable.c file is quite big, before it grows any larger split it
into pgtable.c, pgalloc.c and gmap.c. In addition move the gmap related
header definitions into the new gmap.h header and all of the pgste
helpers from pgtable.h to pgtable.c.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

KVM: s390: allocate only one DMA page per VM

We can fit the 2k for the STFLE interpretation and the crypto
control block into one DMA page. As we now only have to allocate
one DMA page, we can clean up the code a bit.

As a nice side effect, this also fixes a problem with crycbd alignment in
case special allocation debug options are enabled, debugged by Sascha
Silbe.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: gaccess: introduce access modes

We will need special handling when fetching instructions, so let's
introduce new guest access modes GACC_FETCH and GACC_STORE instead
of a write flag. An additional patch will then introduce GACC_IFETCH.

Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: PSW forwarding / rewinding / ilc rework

We have some confusion about ilc vs. ilen in our current code. So let's
correctly use the term ilen when dealing with (ilc << 1).

Program irq injection didn't take care of the correct ilc in case of
irqs triggered by EXECUTE functions, let's provide one function
kvm_s390_get_ilen() to take care of all that.

Also, manually specifying in intercept handlers the size of the
instruction (and sometimes overwriting that value for EXECUTE internally)
doesn't make too much sense. So also provide the functions:
- kvm_s390_retry_instr to retry the currently intercepted instruction
- kvm_s390_rewind_psw to rewind the PSW without internal overwrites
- kvm_s390_forward_psw to forward the PSW

Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

s390: rename struct _lowcore to struct lowcore

Finally get rid of the leading underscore. I tried this already two or
three years ago, however Michael Holzheu objected since this would
break the crash utility (again).

However Michael integrated support for the new name into the crash
utility back then, so it doesn't break if the name will be changed
now. So finally get rid of the ever confusing leading underscore.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

KVM: s390: fix pfmf intercept handler

The pfmf intercept handler should check if the EDAT 1 facility
is installed in the guest, not if it is installed in the host.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: factor out and fix setting of guest TOD clock

Let's move that whole logic into one function. We now always use unsigned
values when calculating the epoch (to avoid over/underflow defined).
Also, we always have to get all VCPUs out of SIE before doing the update
to avoid running differing VCPUs with different TODs.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: switch to get_tod_clock() and fix STP sync races

Nobody except early.c makes use of store_tod_clock() to handle the
cc. So if we would get a cc != 0, we would be in more trouble.

Let's replace all users with get_tod_clock(). Returning a cc
on an ioctl sounded strange either way.

We can now also easily move the get_tod_clock() call into the
preempt_disable() section. This is in fact necessary to make the
STP sync work as expected. Otherwise the host TOD could change
and we would end up with a wrong epoch calculation.

Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: host STP toleration for VMs

If the host has STP enabled, the TOD of the host will be changed during
synchronization phases. These are performed during a stop_machine() call.

As the guest TOD is based on the host TOD, we have to make sure that:
- no VCPU is in the SIE (implicitly guaranteed via stop_machine())
- manual guest TOD calculations are not affected

"Epoch" is the guest TOD clock delta to the host TOD clock. We have to
adjust that value during the STP synchronization and make sure that code
that accesses the epoch won't get interrupted in between (via disabling
preemption).

Signed-off-by: Fan Zhang <zhangfan@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: adapt debug entries for instruction handling

Use the default log level 3 for state changing and/or seldom events,
use 4 for others. Also change some numbers from %x to %d and vice versa
to match documentation. If hex, let's prepend the numbers with 0x.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>

KVM: s390: VCPU_EVENT cleanup for prefix changes

SPX (SET PREFIX) and SIGP (Set prefix) can change the prefix
register of a CPU. As sigp set prefix may be handled in user
space (KVM_CAP_S390_USER_SIGP), we would not log the changes
triggered via SIGP in that case. Let's have just one VCPU_EVENT
at the central location that tracks prefix changes.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>

KVM: s390: clean up cmma_enable check

As we already only enable CMMA when userspace requests it, we can
safely move the additional checks to the request handler and avoid
doing them multiple times. This also tells userspace if CMMA is
available.

Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: Enable guest EDAT2 support

1. Enable EDAT2 in the list of KVM facilities

2. Handle 2G frames in pfmf instruction
If we support EDAT2, we may enable handling of 2G frames if not in 24
bit mode.

3. Enable EDAT2 in sie_block
If the EDAT2 facility is available we enable GED2 mode control in the
sie_block.

Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Guenther Hutzl <hutzl@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: deliver floating interrupts in order of priority

This patch makes interrupt handling compliant to the z/Architecture
Principles of Operation with regard to interrupt priorities.

Add a bitmap for pending floating interrupts. Each bit relates to a
interrupt type and its list. A turned on bit indicates that a list
contains items (interrupts) which need to be delivered. When delivering
interrupts on a cpu we can merge the existing bitmap for cpu-local
interrupts and floating interrupts and have a single mechanism for
delivery.
Currently we have one list for all kinds of floating interrupts and a
corresponding spin lock. This patch adds a separate list per
interrupt type. An exception to this are service signal and machine check
interrupts, as there can be only one pending interrupt at a time.

Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>

KVM: s390: introduce post handlers for STSI

The Store System Information (STSI) instruction currently collects all
information it relays to the caller in the kernel. Some information,
however, is only available in user space. An example of this is the
guest name: The kernel always sets "KVMGuest", but user space knows the
actual guest name.

This patch introduces a new exit, KVM_EXIT_S390_STSI, guarded by a
capability that can be enabled by user space if it wants to be able to
insert such data. User space will be provided with the target buffer
and the requested STSI function code.

Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: Guest's memory access functions get access registers

In access register mode, the write_guest() read_guest() and other
functions will invoke the access register translation, which
requires an ar, designated by one of the instruction fields.

Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: Fix low-address protection for real addresses

The kvm_s390_check_low_addr_protection() function is used only with real
addresses. According to the POP (the "Low-Address Protection"
paragraph in chapter 3), if the effective address is real or absolute,
the low-address protection procedure should raise a PROTECTION exception
only when the low-address protection is enabled in the control register
0 and the address is low.
This patch removes ASCE checks from the function and renames it to
better reflect its behavior.

Cc: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: reinjection of irqs can fail in the tpi handler

The reinjection of an I/O interrupt can fail if the list is at the limit
and between the dequeue and the reinjection, another I/O interrupt is
injected (e.g. if user space floods kvm with I/O interrupts).

This patch avoids this memory leak and returns -EFAULT in this special
case. This error is not recoverable, so let's fail hard. This can later
be avoided by not dequeuing the interrupt but working directly on the
locked list.

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # 3.16+
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: fix handling of write errors in the tpi handler

If the I/O interrupt could not be written to the guest provided
area (e.g. access exception), a program exception was injected into the
guest but "inti" wasn't freed, therefore resulting in a memory leak.

In addition, the I/O interrupt wasn't reinjected. Therefore the dequeued
interrupt is lost.

This patch fixes the problem while cleaning up the function and making the
cc and rc logic easier to handle.

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # 3.16+
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: Zero out current VMDB of STSI before including level3 data.

s390 documentation requires words 0 and 10-15 to be reserved and stored as
zeros. As we fill out all other fields, we can memset the full structure.

Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: include guest facilities in kvm facility test

Most facility related decisions in KVM have to take into account:

- the facilities offered by the underlying run container (LPAR/VM)
- the facilities supported by the KVM code itself
- the facilities requested by a guest VM

This patch adds the KVM driver requested facilities to the test routine.

It additionally renames struct s390_model_fac to kvm_s390_fac and its field
names to be more meaningful.

The semantics of the facilities stored in the KVM architecture structure
is changed. The address arch.model.fac->list now points to the guest
facility list and arch.model.fac->mask points to the KVM facility mask.

This patch fixes the behaviour of KVM for some facilities for guests
that ignore the guest visible facility bits, e.g. guests could use
transactional memory intructions on hosts supporting them even if the
chosen cpu model would not offer them.

The userspace interface is not affected by this change.

Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: use facilities and cpu_id per KVM

The patch introduces facilities and cpu_ids per virtual machine.
Different virtual machines may want to expose different facilities and
cpu ids to the guest, so let's make them per-vm instead of global.

Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: Fix rewinding of the PSW pointing to an EXECUTE instruction

A couple of our interception handlers rewind the PSW to the beginning
of the instruction to run the intercepted instruction again during the
next SIE entry. This normally works fine, but there is also the
possibility that the instruction did not get run directly but via an
EXECUTE instruction.
In this case, the PSW does not point to the instruction that caused the
interception, but to the EXECUTE instruction! So we've got to rewind the
PSW to the beginning of the EXECUTE instruction instead.
This is now accomplished with a new helper function kvm_s390_rewind_psw().

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: Small fixes for the PFMF handler

This patch includes two small fixes for the PFMF handler: First, the
start address for PFMF has to be masked according to the current
addressing mode, which is now done with kvm_s390_logical_to_effective().
Second, the protection exceptions have a lower priority than the
specification exceptions, so the check for low-address protection
has to be moved after the last spot where we inject a specification
exception.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: fix handling of lctl[g]/stctl[g]

According to the architecture all instructions are suppressing if memory
access is prohibited due to DAT protection, unless stated otherwise for
an instruction.
The lctl[g]/stctl[g] implementations handled this incorrectly since
control register handling was done piecemeal, which means they had
terminating instead of suppressing semantics.
This patch fixes this.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: flush CPU on load control

some control register changes will flush some aspects of the CPU, e.g.
POP explicitely mentions that for CR9-CR11 "TLBs may be cleared".
Instead of trying to be clever and only flush on specific CRs, let
play safe and flush on all lctl(g) as future machines might define
new bits in CRs. Load control intercept should not happen that often.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org

s390/mm: disable KSM for storage key enabled pages

When storage keys are enabled unmerge already merged pages and prevent
new pages from being merged.

Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

KVM: s390/mm: cleanup gmap function arguments, variable names

Make the order of arguments for the gmap calls more consistent,
if the gmap pointer is passed it is always the first argument.
In addition distinguish between guest address and user address
by naming the variables gaddr for a guest address and vmaddr for
a user address.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: no special machine check delivery

The load PSW handler does not have to inject pending machine checks.
This can wait until the CPU runs the generic interrupt injection code.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>

KVM: s390: Enable DAT support for TPROT handler

The TPROT instruction can be used to check the accessability of storage
for any kind of logical addresses. So far, our handler only supported
real addresses. This patch now also enables support for addresses that
have to be translated via DAT first. And while we're at it, change the
code to use the common KVM function gfn_to_hva_prot() to check for the
validity and writability of the memory page.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>

KVM: s390: split SIE state guest prefix field

This patch splits the SIE state guest prefix at offset 4
into a prefix bit field. Additionally it provides the
access functions:

- kvm_s390_get_prefix()
- kvm_s390_set_prefix()

to access the prefix per vcpu.

Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: Improve is_valid_psw()

As a program status word is also invalid (and thus generates an
specification exception) if the instruction address is not even,
we should test this in is_valid_psw(), too. This patch also exports
the function so that it becomes available for other parts of the
S390 KVM code as well.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: Add low-address protection to TEST BLOCK

TEST BLOCK is also subject to the low-address protection, so we need
to check the destination address in our handler.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: Fixes for PFMF

Add a check for low-address protection to the PFMF handler and
convert real-addresses to absolute if necessary, as it is defined
in the Principles of Operations specification.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: emulate stctl and stctg

Introduce the methods to emulate the stctl and stctg instruction. Added tracing
code.

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: convert handle_stsi()

Convert handle_stsi() to new guest access functions.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: convert handle lctl[g]()

Convert handle lctl[g]() to new guest access functions.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: convert handle_stidp()

Convert handle_stidp() to new guest access functions.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: convert handle_lpsw[e]()

Convert handle_lpsw[e]() to new guest access functions.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: reinject io interrupt on tpi failure

The tpi instruction should be suppressed on addressing and protection
exceptions, so we need to re-inject the dequeued io interrupt in that
case.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: convert handle_tpi()

Convert handle_tpi() to new guest access functions.

The code now sets up a structure which is copied with a single call to
guest space instead of issuing several separate guest access calls.
This is necessary since the to be copied data may cross a page boundary.
If a protection exception happens while accessing any of the pages, the
instruction is suppressed and may not have modified any memory contents.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: convert handle_test_block()

Convert handle_test_block() to new guest access functions.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: convert handle_store_cpu_address()

Convert handle_store_cpu_address() to new guest access functions.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: convert handle_store_prefix()

Convert handle_store_prefix() to new guest access functions.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: convert handle_set_clock()

Convert handle_set_clock() to new guest access functions.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: convert __sigp_set_prefix()/handle_set_prefix()

Convert __sigp_set_prefix() and handle_set_prefix() to new guest
access functions.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: convert handle_stfl()

Convert handle_stfl() to new guest access functions.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: make use of ipte lock

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: make cmma usage conditionally

When userspace reset the guest without notifying kvm, the CMMA state
of the pages might be unused, resulting in guest data corruption.
To avoid this, CMMA must be enabled only if userspace understands
the implications.

CMMA must be enabled before vCPU creation. It can't be switched off
once enabled. All subsequently created vCPUs will be enabled for
CMMA according to the CMMA state of the VM.

Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[remove now unnecessary calls to page_table_reset_pgste]

KVM: s390: Don't enable skeys by default

The first invocation of storage key operations on a given cpu will be intercepted.

On these intercepts we will enable storage keys for the guest and remove the
previously added intercepts.

Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

KVM: s390: Simplify online vcpus counting for stsi

We don't need to loop over all cpus to get the number of
vcpus. Let's use the available counter online_vcpus instead.

Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

s390/kvm: support collaborative memory management

This patch enables Collaborative Memory Management (CMM) for kvm
on s390. CMM allows the guest to inform the host about page usage
(see arch/s390/mm/cmm.c). The host uses this information to avoid
swapping in unused pages in the page fault handler. Further, a CPU
provided list of unused invalid pages is processed to reclaim swap
space of not yet accessed unused pages.

[ Martin Schwidefsky: patch reordering and cleanup ]

Signed-off-by: Konstantin Weitz <konstantin.weitz@gmail.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390: Fix misspellings using 'codespell' tool

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

KVM: s390: Do not set CC3 for EQBS and SQBS

The EQBS and SQBS instructions do not set CC3 for invalid channels, but
should throw an operation exception instead when not available. Thus they
should not be handled by the handle_io_inst() wrapper but drop to userspace
instead (which will then inject the operation exception).

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>

KVM: s390: Fix access to CR6 in TPI handler

The TPI handler currently uses vcpu->run->s.regs.crs[6] to get the current
value of CR6. I think this is wrong, because vcpu->run->s.regs.crs is
only updated when kvm_arch_vcpu_ioctl_run() drops back to userspace.
So let's change the TPI handler to use vcpu->arch.sie_block->gcr[6] instead.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>

KVM: s390: Intercept SCK instruction

Interception of the SET CLOCK instruction is mandatory, so this patch
provides a simple handler for this instruction (by setting up the
"epoch" field in the sie_block).

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: s390: Implement TEST BLOCK

This patch provides a simple version for the mandatory TEST BLOCK
instruction interception, so that guests that use this instruction
do not crash anymore.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: s390: Add helper function for setting condition code

Introduced a helper function for setting the CC in the
guest PSW to improve the readability of the code.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: s390: Fix sparse warnings in priv.c

sparse complained about the missing UL postfix for long constants.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: s390: declare virtual HW facilities

The patch renames the array holding the HW facility bitmaps.
This allows to interprete the variable as set of virtual
machine specific "virtual" facilities. The basic idea is
to make virtual facilities externally managable in future.
An availability test for virtual facilites has been added
as well.

Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: s390: fix pfmf non-quiescing control handling

Fix the test within handle_pfmf() if the host has the NQ key-setting
facility installed.
Right now the code would incorrectly generate a program check in the
guest if the NQ control bit for a pfmf request was set and if the host
has the NQ key-setting facility installed.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: s390: Fixed priority of execution in STSI

Added some missing validity checks for the operands and fixed the
priority of exceptions for some function codes according to the
"Principles of Operation" document.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: s390: Reworked LCTL and LCTLG instructions

LCTL and LCTLG are also privileged instructions, thus there is no need for
treating them separately from the other instructions in priv.c. So this
patch moves these two instructions to priv.c, adds a check for supervisor
state and simplifies the "handle_eb" instruction decoding by merging the
two eb_handlers jump tables from intercept.c and priv.c into one table only.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: s390: Check for access exceptions during TPI

When a guest calls the TPI instruction, the second operand address could
point to an invalid location. In this case the problem should be signaled
to the guest by throwing an access exception.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: s390: Privileged operation checks moved to instruction handlers

We need more fine-grained control about the point in time when we check
for privileged instructions, since the exceptions that can happen during
an instruction have a well-defined priority. For example, for the PFMF
instruction, the check for PGM_PRIVILEGED_OP must happen after the check
for PGM_OPERATION since the latter has a higher precedence - thus the
check for privileged operation must not be done in kvm_s390_handle_b9()
already.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: s390: Privileged operation check for TPROT

TPROT is a privileged instruction and thus should generate a privileged
operation exception when the problem state bit is not cleared in the PSW.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: s390: Renamed PGM_PRIVILEGED_OPERATION

Renamed the PGM_PRIVILEGED_OPERATION define to PGM_PRIVILEGED_OP since this
define was way longer than the other PGM_* defines and caused the code often
to exceed the 80 columns limit when not split to multiple lines.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: s390: Fix epsw instruction decoding

The handle_epsw() function calculated the first register in the wrong way,
so that it always used r0 by mistake. Now the code uses the common helper
function for decoding the registers of rre functions instead to avoid such
mistakes.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: s390: guest large pages

This patch enables kvm to give large pages to the guest. The heavy
lifting is done by the hardware, the host only has to take care
of the PFMF instruction, which is also part of EDAT-1.

We also support the non-quiescing key setting facility if the host
supports it, to behave similar to the interpretation of sske.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

s390/kvm: fix psw rewinding in handle_skey

The PSW can wrap if the guest has been running in the 24 bit or 31 bit
addressing mode. Use __rewind_psw to find the correct address.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>

KVM: s390: fix compile with !CONFIG_COMPAT

arch/s390/kvm/priv.c should include both
linux/compat.h and asm/compat.h.
Fixes this one:

In file included from arch/s390/kvm/priv.c:23:0:
arch/s390/include/asm/compat.h: In function ‘arch_compat_alloc_user_space’:
arch/s390/include/asm/compat.h:258:2: error: implicit declaration of function ‘is_compat_task’

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>

KVM: s390: fix stsi exception handling

In case of an exception the guest psw condition code should be left alone.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-By: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>

KVM: s390: fix and enforce return code handling for irq injections

kvm_s390_inject_program_int() and friends may fail if no memory is available.
This must be reported to the calling functions, so that this gets passed
down to user space which should fix the situation.
Alternatively we end up with guest state corruption.

So fix this and enforce return value checking by adding a __must_check
annotation to all of these function prototypes.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>

KVM: s390: make if statements in lpsw/lpswe handlers readable

Being unable to parse the 5- and 8-line if statements I had to split them
to be able to make any sense of them and verify that they match the
architecture.
So change the code since I guess that other people will also have a hard
time parsing such long conditional statements with line breaks.

Introduce a common is_valid_psw() function which does all the checks needed.
In case of lpsw (64 bit psw -> 128 bit psw conversion) it will do some not
needed additional checks, since a couple of bits can't be set anyway, but
that doesn't hurt.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>

KVM: s390: fix return code handling in lpsw/lpswe handlers

kvm_s390_inject_program_int() may return with a non-zero return value, in
case of an error (out of memory). Report that to the calling functions
instead of ignoring the error case.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>

KVM: s390: fix psw conversion in lpsw handler

When converting a 64 bit psw to a 128 bit psw the addressing mode bit of
the "addr" part of the 64 bit psw must be moved to the basic addressing
mode bit of the "mask" part of the 128 bit psw.
In addition the addressing mode bit must be cleared when moved to the "addr"
part of the 128 bit psw.
Otherwise an invalid psw would be generated if the orginal psw was in the
31 bit addressing mode.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>

KVM: s390: fix 24 bit psw handling in lpsw/lpswe handler

When checking for validity the lpsw/lpswe handler check that only
the lower 20 bits instead of 24 bits have a non-zero value.
There handling valid psws as invalid ones.
Fix the 24 bit psw mask.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>

s390/kvm,gaccess: add address space annotations

Add missing address space annotations to all put_guest()/get_guest() callers.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

s390/kvm: cleanup/fix handle_tpi()

- add missing specification exception check
- remove one level of indentation
- use defines instead of magic numbers

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

s390/kvm,gaccess: shorten put/get_guest code

The put_guest_u*/get_guest_u* are nothing but wrappers for the regular
put_user/get_user uaccess functions. The only difference is that before
accessing user space the guest address must be translated to a user space
address.
Change the order of arguments for the guest access functions so they
match their uaccess parts. Also remove the u* suffix, so we simply
have put_guest/get_guest which will automatically use the right size
dependent on pointer type of the destination/source that now must be
correct.
In result the same behaviour as put_user/get_user except that accesses
must be aligned.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

s390/kvm: remove explicit -EFAULT return code checking on guest access

Let's change to the paradigm that every return code from guest memory
access functions that is not zero translates to -EFAULT and do not
explictly compare.
Explictly comparing the return value with -EFAULT has already shown to
be a bit fragile. In addition this is closer to the handling of
copy_to/from_user functions, which imho is in general a good idea.

Also shorten the return code handling in interrupt.c a bit.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

s390/kvm,tprot: use new gmap_translate() function

When out-of-memory the tprot code incorrectly injected a program check
for the guest which reported an addressing exception even if the guest
address was valid.
Let's use the new gmap_translate() which translates a guest address to
a user space address whithout the chance of running into an out-of-memory
situation.
Also make it more explicit that for -EFAULT we won't find a vma.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: s390: Add support for channel I/O instructions.

Add a new capability, KVM_CAP_S390_CSS_SUPPORT, which will pass
intercepts for channel I/O instructions to userspace. Only I/O
instructions interacting with I/O interrupts need to be handled
in-kernel:

- TEST PENDING INTERRUPTION (tpi) dequeues and stores pending
interrupts entirely in-kernel.
- TEST SUBCHANNEL (tsch) dequeues pending interrupts in-kernel
and exits via KVM_EXIT_S390_TSCH to userspace for subchannel-
related processing.

Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: s390: In-kernel handling of I/O instructions.

Explicitely catch all channel I/O related instructions intercepts
in the kernel and set condition code 3 for them.

This paves the way for properly handling these instructions later
on.

Note: This is not architecture compliant (the previous code wasn't
either) since setting cc 3 is not the correct thing to do for some
of these instructions. For Linux guests, however, it still has the
intended effect of stopping css probing.

Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: s390: Add support for machine checks.

Add support for injecting machine checks (only repressible
conditions for now).

This is a bit more involved than I/O interrupts, for these reasons:

- Machine checks come in both floating and cpu varieties.
- We don't have a bit for machine checks enabling, but have to use
a roundabout approach with trapping PSW changing instructions and
watching for opened machine checks.

Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: s390: Decoding helper functions.

Introduce helper functions for decoding the various base/displacement
instruction formats.

Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: s390: Constify intercept handler tables.

These tables are never modified.

Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

s390/sysinfo,stsi: change return code handling

Change return code handling of the stsi() function:

In case function code 0 was specified the return value is the
current configuration level (already shifted). That way all
the code that actually copied the stsi_0() function can go
away.

Otherwise the return value is 0 (success) or negative to
indicate an error (currently only -EOPNOTSUPP).

Also stsi() is no longer an inline function. The function is
not performance critical, but every caller would generate an
exception table entry for this function.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

KVM: s390: Add architectural trace events

Add trace events for several s390 architecture specifics:

- SIE entry/exit
- common intercepts
- common instructions (sigp/diagnose)

Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

s390/comments: unify copyright messages and remove file names

Remove the file name from the comment at top of many files. In most
cases the file name was wrong anyway, so it's rather pointless.

Also unify the IBM copyright statement. We did have a lot of sightly
different statements and wanted to change them one after another
whenever a file gets touched. However that never happened. Instead
people start to take the old/"wrong" statements to use as a template
for new files.
So unify all of them in one go.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

KVM: s390: Handle sckpf instruction

Handle the mandatory intercept SET CLOCK PROGRAMMABLE FIELD
instruction.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: s390: provide general purpose guest registers via kvm_run

This patch adds the general purpose registers to the kvm_run structure.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: s390: rework code that sets the prefix

There are several places in the kvm module, which set the prefix register.
Since we need to flush the cpu, lets combine this operation into a helper
function. This helper will also explicitely mask out the unused bits.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: s390: Fix tprot locking

There is a potential host deadlock in the tprot intercept handling.
We must not hold the mmap semaphore while resolving the guest
address. If userspace is remapping, then the memory detection in
the guest is broken anyway so we can safely separate the
address translation from walking the vmas.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

[S390] kvm: handle tprot intercepts

When running a kvm guest we can get intercepts for tprot, if the host
page table is read-only or not populated. This patch implements the
most common case (linux memory detection).
This also allows host copy on write for guest memory on newer systems.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Fix common misspellings

Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>

[S390] cleanup facility list handling

Store the facility list once at system startup with stfl/stfle and
reuse the result for all facility tests.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.

2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).

* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

[S390] Replace ENOTSUPP usage with EOPNOTSUPP

ENOTSUPP is not supposed to leak to userspace so lets just use
EOPNOTSUPP everywhere.
Doesn't fix a bug, but makes future reviews easier.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

KVM: s390: Allow stfle instruction in the guest

2.6.31-rc introduced an architecture level set checker based on facility
bits. e.g. if the kernel is compiled to run only on z9, several facility
bits are checked very early and the kernel refuses to boot if a z9 specific
facility is missing.
Until now kvm on s390 did not implement the store facility extended (STFLE)
instruction. A 2.6.31-rc kernel that was compiled for z9 or higher did not
boot in kvm. This patch implements stfle.

This patch should go in before 2.6.31.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: s390: optimize float int lock: spin_lock_bh --> spin_lock

The floating interrupt lock is only taken in process context. We can
replace all spin_lock_bh with standard spin_lock calls.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Ehrhardt <ehrhardt@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: s390: Fix problem state check for b2 intercepts

The kernel handles some priviledged instruction exits. While I was
unable to trigger such an exit from guest userspace, the code should
check for supervisor state before emulating a priviledged instruction.

I also renamed kvm_s390_handle_priv to kvm_s390_handle_b2. After all
there are non priviledged b2 instructions like stck (store clock).

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

[S390] Use unsigned long long for u64 on 64bit.

As requested by Andrew. Same as what sparc did.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

KVM: s390: Make facility bits future-proof

Heiko Carstens pointed out, that its safer to activate working facilities
instead of disabling problematic facilities. The new code uses the host
facility bits and masks it with known good ones.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

KVM: s390: Fix kvm on IBM System z10

The z10 system supports large pages, kvm-s390 doesnt.
Make sure that we dont advertise large pages to avoid the guest crashing as
soon as the guest kernel activates DAT.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

KVM: s390: rename private structures

While doing some tests with our lcrash implementation I have seen a
naming conflict with prefix_info in kvm_host.h vs. addrconf.h

To avoid future conflicts lets rename private definitions in
asm/kvm_host.h by adding the kvm_s390 prefix.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

[S390] Move stfl to system.h and delete duplicated version.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

KVM: s390: rename stfl to kvm_stfl

Temporarily rename this function to avoid merge conflicts and/or
dependencies. This function will be removed as soon as git-s390
and kvm.git are finally upstream.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

KVM: s390: intercepts for privileged instructions

This patch introduces in-kernel handling of some intercepts for privileged
instructions:

handle_set_prefix() sets the prefix register of the local cpu
handle_store_prefix() stores the content of the prefix register to memory
handle_store_cpu_address() stores the cpu number of the current cpu to memory
handle_skey() just decrements the instruction address and retries
handle_stsch() delivers condition code 3 "operation not supported"
handle_chsc() same here
handle_stfl() stores the facility list which contains the
capabilities of the cpu
handle_stidp() stores cpu type/model/revision and such
handle_stsi() stores information about the system topology

Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>