s390/fpu: get rid of MACHINE_HAS_VX

Get rid of MACHINE_HAS_VX and replace it with cpu_has_vx() which is a
short readable wrapper for "test_facility(129)".

Facility bit 129 is set if the vector facility is present. test_facility()
returns also true for all bits which are set in the architecture level set
of the cpu that the kernel is compiled for. This means that
test_facility(129) is a compile time constant which returns true for z13
and later, since the vector facility bit is part of the z13 kernel ALS.

In result the compiled code will have less runtime checks, and less code.

Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

s390/cmma: rework no-dat handling

Rework the way physical pages are set no-dat / dat:

The old way is:

- Rely on that all pages are initially marked "dat"
- Allocate page tables for the kernel mapping
- Enable dat
- Walk the whole kernel mapping and set PG_arch_1 bit in all struct pages
that belong to pages of kernel page tables
- Walk all struct pages and test and clear the PG_arch_1 bit. If the bit is
not set, set the page state to no-dat
- For all subsequent page table allocations, set the page state to dat
(remove the no-dat state) on allocation time

Change this rather complex logic to a simpler approach:

- Set the whole physical memory (all pages) to "no-dat"
- Explicitly set those page table pages to "dat" which are part of the
kernel image (e.g. swapper_pg_dir)
- For all subsequent page table allocations, set the page state to dat
(remove the no-dat state) on allocation time

In result the code is simpler, and this also allows to get rid of one
odd usage of the PG_arch_1 bit.

Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390/cmma: move parsing of cmma kernel parameter to early boot code

The "cmma=" kernel command line parameter needs to be parsed early for
upcoming changes. Therefore move the parsing code.

Note that EX_TABLE handling of cmma_test_essa() needs to be open-coded,
since the early boot code doesn't have infrastructure for handling expected
exceptions.

Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390: remove "noexec" option

Do the same like x86 with commit 76ea0025a214 ("x86/cpu: Remove "noexec"")
and remove the "noexec" kernel command line option.

Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390/mm: move pfault code to own C file

The pfault code has nothing to do with regular fault handling.

Therefore move it to an own C file. Also add an own pfault header
file. This way changes to setup.h don't cause a recompile of the
pfault code and vice versa.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390/mm: rework arch_get_mappable_range() callback

As per description in mm/memory_hotplug.c platforms should define
arch_get_mappable_range() that provides maximum possible addressable
physical memory range for which the linear mapping could be created.

The current implementation uses VMEM_MAX_PHYS macro as the maximum
mappable physical address and it is simply a cast to vmemmap. Since
the address is in physical address space the natural upper limit of
MAX_PHYSMEM_BITS is honoured:

vmemmap_start = min(vmemmap_start, 1UL << MAX_PHYSMEM_BITS);

Further, to make sure the identity mapping would not overlay with
vmemmap, the size of identity mapping could be stripped like this:

ident_map_size = min(ident_map_size, vmemmap_start);

Similarily, any other memory that could be added (e.g DCSS segment)
should not overlay with vmemmap as well and that is prevented by
using vmemmap (VMEM_MAX_PHYS macro) as the upper limit.

However, while the use of VMEM_MAX_PHYS brings the desired result
it actually poses two issues:

1. As described, vmemmap is handled as a physical address, although
it is actually a pointer to struct page in virtual address space.

2. As vmemmap is a virtual address it could have been located
anywhere in the virtual address space. However, the desired
necessity to honour MAX_PHYSMEM_BITS limit prevents that.

Rework arch_get_mappable_range() callback in a way it does not
use VMEM_MAX_PHYS macro and does not confuse the notion of virtual
vs physical address spacees as result. That paves the way for moving
vmemmap elsewhere and optimizing the virtual address space layout.

Introduce max_mappable preserved boot variable and let function
setup_kernel_memory_layout() set it up. As result, the rest of the
code is does not need to know the virtual memory layout specifics.

Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390/kaslr: provide kaslr_enabled() function

Just like other architectures provide a kaslr_enabled() function, instead
of directly accessing a global variable.

Also pass the renamed __kaslr_enabled variable from the decompressor to the
kernel, so that kalsr_enabled() is available there too. This will be used
by a subsequent patch which randomizes the module base load address.

Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390/boot: rework decompressor reserved tracking

Currently several approaches for finding unused memory in decompressor
are utilized. While "safe_addr" grows towards higher addresses, vmem
code allocates paging structures top down. The former requires careful
ordering. In addition to that ipl report handling code verifies potential
intersections with secure boot certificates on its own. Neither of two
approaches are memory holes aware and consistent with each other in low
memory conditions.

To solve that, existing approaches are generalized and combined
together, as well as online memory ranges are now taken into
consideration.

physmem_info has been extended to contain reserved memory ranges. New
set of functions allow to handle reserves and find unused memory.
All reserves and memory allocations are "typed". In case of out of
memory condition decompressor fails with detailed info on current
reserved ranges and usable online memory.

Linux version 6.2.0 ...
Kernel command line: ... mem=100M
Our of memory allocating 100000 bytes 100000 aligned in range 0:5800000
Reserved memory ranges:
0000000000000000 0000000003e33000 DECOMPRESSOR
0000000003f00000 00000000057648a3 INITRD
00000000063e0000 00000000063e8000 VMEM
00000000063eb000 00000000063f4000 VMEM
00000000063f7800 0000000006400000 VMEM
0000000005800000 0000000006300000 KASAN
Usable online memory ranges (info source: sclp read info [3]):
0000000000000000 0000000006400000
Usable online memory total: 6400000 Reserved: 61b10a3 Free: 24ef5d
Call Trace:
(sp:000000000002bd58 [<0000000000012a70>] physmem_alloc_top_down+0x60/0x14c)
sp:000000000002bdc8 [<0000000000013756>] _pa+0x56/0x6a
sp:000000000002bdf0 [<0000000000013bcc>] pgtable_populate+0x45c/0x65e
sp:000000000002be90 [<00000000000140aa>] setup_vmem+0x2da/0x424
sp:000000000002bec8 [<0000000000011c20>] startup_kernel+0x428/0x8b4
sp:000000000002bf60 [<00000000000100f4>] startup_normal+0xd4/0xd4

physmem_alloc_range allows to find free memory in specified range. It
should be used for one time allocations only like finding position for
amode31 and vmlinux.
physmem_alloc_top_down can be used just like physmem_alloc_range, but
it also allows multiple allocations per type and tries to merge sequential
allocations together. Which is useful for paging structures allocations.
If sequential allocations cannot be merged together they are "chained",
allowing easy per type reserved ranges enumeration and migration to
memblock later. Extra "struct reserved_range" allocated for chaining are
not tracked or reserved but rely on the fact that both
physmem_alloc_range and physmem_alloc_top_down search for free memory
only below current top down allocator position. All reserved ranges
should be transferred to memblock before memblock allocations are
enabled.

The startup code has been reordered to delay any memory allocations until
online memory ranges are detected and occupied memory ranges are marked as
reserved to be excluded from follow-up allocations.
Ipl report certificates are a special case, ipl report certificates list
is checked together with other memory reserves until certificates are
saved elsewhere.
KASAN required memory for shadow memory allocation and mapping is reserved
as 1 large chunk which is later passed to KASAN early initialization code.

Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390/boot: remove non-functioning image bootable check

check_image_bootable() has been introduced with commit 627c9b62058e
("s390/boot: block uncompressed vmlinux booting attempts") to make sure
that users don't try to boot uncompressed vmlinux ELF image in qemu. It
used to be possible quite some time ago. That commit prevented confusion
with uncompressed vmlinux image starting to boot and even printing
kernel messages until it crashed. Users might have tried to report the
problem without realizing they are doing something which was not intended.
Since commit f1d3c5323772 ("s390/boot: move sclp early buffer from fixed
address in asm to C") check_image_bootable() doesn't function properly
anymore, as well as booting uncompressed vmlinux image in qemu doesn't
really produce any output and crashes. Moving forward it doesn't make
sense to fix check_image_bootable() anymore, so simply remove it.

Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390/setup: always inline gen_lpswe()

gen_lpswe() contains a BUILD_BUG_ON() statement which depends on a function
parameter. If the compiler decides to generate a not inlined function this
will lead to a build error, even if all call sites pass a valid parameter.

To avoid this always inline gen_lpswe().

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390/mm: add support for RDP (Reset DAT-Protection)

RDP instruction allows to reset DAT-protection bit in a PTE, with less
CPU synchronization overhead than IPTE instruction. In particular, IPTE
can cause machine-wide synchronization overhead, and excessive IPTE usage
can negatively impact machine performance.

RDP can be used instead of IPTE, if the new PTE only differs in SW bits
and _PAGE_PROTECT HW bit, for PTE protection changes from RO to RW.
SW PTE bit changes are allowed, e.g. for dirty and young tracking, but none
of the other HW-defined part of the PTE must change. This is because the
architecture forbids such changes to an active and valid PTE, which
is why invalidation with IPTE is always used first, before writing a new
entry.

The RDP optimization helps mainly for fault-driven SW dirty-bit tracking.
Writable PTEs are initially always mapped with HW _PAGE_PROTECT bit set,
to allow SW dirty-bit accounting on first write protection fault, where
the DAT-protection would then be reset. The reset is now done with RDP
instead of IPTE, if RDP instruction is available.

RDP cannot always guarantee that the DAT-protection reset is propagated
to all CPUs immediately. This means that spurious TLB protection faults
on other CPUs can now occur. For this, common code provides a
flush_tlb_fix_spurious_fault() handler, which will now be used to do a
CPU-local TLB flush. However, this will clear the whole TLB of a CPU, and
not just the affected entry. For more fine-grained flushing, by simply
doing a (local) RDP again, flush_tlb_fix_spurious_fault() would need to
also provide the PTE pointer.

Note that spurious TLB protection faults cannot really be distinguished
from racing pagetable updates, where another thread already installed the
correct PTE. In such a case, the local TLB flush would be unnecessary
overhead, but overall reduction of CPU synchronization overhead by not
using IPTE is still expected to be beneficial.

Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390: move __amode31_base declaration to proper header file

Move __amode31_base declaration to proper header file to get rid of

arch/s390/boot/startup.c:24:15:
warning: symbol '__amode31_base' was not declared. Should it be static?

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390/mm: start kernel with DAT enabled

The setup of the kernel virtual address space is spread
throughout the sources, boot stages and config options
like this:

1. The available physical memory regions are queried
and stored as mem_detect information for later use
in the decompressor.

2. Based on the physical memory availability the virtual
memory layout is established in the decompressor;

3. If CONFIG_KASAN is disabled the kernel paging setup
code populates kernel pgtables and turns DAT mode on.
It uses the information stored at step [1].

4. If CONFIG_KASAN is enabled the kernel early boot
kasan setup populates kernel pgtables and turns DAT
mode on. It uses the information stored at step [1].

The kasan setup creates early_pg_dir directory and
directly overwrites swapper_pg_dir entries to make
shadow memory pages available.

Move the kernel virtual memory setup to the decompressor
and start the kernel with DAT turned on right from the
very first istruction. That completely eliminates the
boot phase when the kernel runs in DAT-off mode, simplies
the overall design and consolidates pgtables setup.

The identity mapping is created in the decompressor, while
kasan shadow mappings are still created by the early boot
kernel code.

Share with decompressor the existing kasan memory allocator.
It decreases the size of a newly requested memory block from
pgalloc_pos and ensures that kernel image is not overwritten.
pgalloc_low and pgalloc_pos pointers are made preserved boot
variables for that.

Use the bootdata infrastructure to setup swapper_pg_dir
and invalid_pg_dir directories used by the kernel later.
The interim early_pg_dir directory established by the
kasan initialization code gets eliminated as result.

As the kernel runs in DAT-on mode only the PSW_KERNEL_BITS
define gets PSW_MASK_DAT bit by default. Additionally, the
setup_lowcore_dat_off() and setup_lowcore_dat_on() routines
get merged, since there is no DAT-off mode stage anymore.

The memory mappings are created with RW+X protection that
allows the early boot code setting up all necessary data
and services for the kernel being booted. Just before the
paging is enabled the memory protection is changed to
RO+X for text, RO+NX for read-only data and RW+NX for
kernel data and the identity mapping.

Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390: make command line configurable

Allow to configure the command line to an arbitrary length, with a
default of 4096 bytes. Also remove COMMAND_LINE_SIZE from
include/uapi/asm/setup.h as this is dynamic now and doesn't tell
anything about the command line size limitations of a new kernel
that might be loaded.

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390: support command lines longer than 896 bytes

Currently s390 supports a fixed maximum command line length of 896
bytes. This isn't enough as some installers are trying to pass all
configuration data via kernel command line, and even with zfcp alone
it is easy to generate really long command lines. Therefore extend
the command line to 4 kbytes.

In the parm area where the command line is stored there is no indication
of the maximum allowed length, so a new field which contains the maximum
length is added.

The parm area has always been initialized to zero, so with old kernels
this field would read zero. This is important because tools like zipl
could read this field. If it contains a number larger than zero zipl
knows the maximum length that can be stored in the parm area, otherwise
it must assume that it is booting a legacy kernel and only 896 bytes are
available.

The removing of trailing whitespace in head.S is also removed because
code to do this is already present in setup_boot_command_line().

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390/kexec_file: move kernel image size check

In preparation of adding support for command lines with variable
sizes on s390, the check whether the new kernel image is at least HEAD_END
bytes long isn't correct. Move the check to kexec_file_add_components()
so we can get the size of the parm area and check the size there.

The '.org HEAD_END' directive can now also be removed from head.S. This
was used in the past to reserve space for the early sccb buffer, but with
commit 9a5131b87cac1 ("s390/boot: move sclp early buffer from fixed address
in asm to C") this is no longer required.

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390: make PCI mio support a machine flag

Kernel support for the newer PCI mio instructions can be toggled off
with the pci=nomio command line option which needs to integrate with
common code PCI option parsing. However this option then toggles static
branches which can't be toggled yet in an early_param() call.

Thus commit 9964f396f1d0 ("s390: fix setting of mio addressing control")
moved toggling the static branches to the PCI init routine.

With this setup however we can't check for mio support outside the PCI
code during early boot, i.e. before switching the static branches, which
we need to be able to export this as an ELF HWCAP.

Improve on this by turning mio availability into a machine flag that
gets initially set based on CONFIG_PCI and the facility bit and gets
toggled off if pci=nomio is found during PCI option parsing allowing
simple access to this machine flag after early init.

Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390/boot: move EP_OFFSET and EP_STRING to head.S

Both macros are used only in decompressor's head.S, unnecessary to put
them in a global header used in many places like setup.h is.

Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390/setup: generate asm offsets from struct parmarea

To reduce duplication, replace error-prone and hard-coded parameter area
offsets with auto-generated ones.

Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390/setup: drop _OFFSET macros

The macros
* IPL_DEVICE_OFFSET
* INITRD_START_OFFSET
* INITRD_SIZE_OFFSET
* OLDMEM_BASE_OFFSET
* OLDMEM_SIZE_OFFSET
* KERNEL_VERSION_OFFSET
* COMMAND_LINE_OFFSET
are no longer necessary and used only to define another set of macros
with the same names but w/o the suffix _OFFSET. Therefore, drop this
unnecessary indirection.

Drop the macro KERNEL_VERSION_OFFSET w/o renaming it to KERNEL_VERSION
because it is used nowhere.

Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390/setup: remove unused symbolic constants for C code from setup.h

These symbolic constants are used only by assembler code now:
* COMMAND_LINE
* IPL_DEVICE

C code of the decompressed kernel should use boot data passed
by the decompressor instead.

Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390/dump: introduce boot data 'oldmem_data'

The new boot data struct shall replace global variables OLDMEM_BASE and
OLDMEM_SIZE. It is initialized in the decompressor and passed
to the decompressed kernel. In comparison to the old solution, this one
doesn't access data at fixed physical addresses which will become important
when the decompressor becomes relocatable.

Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390/boot: introduce boot data 'initrd_data'

The new boot data struct shall replace global variables INITRD_START and
INITRD_SIZE. It is initialized in the decompressor and passed
to the decompressed kernel. In comparison to the old solution, this one
doesn't access data at fixed physical addresses which will become important
when the decompressor becomes relocatable.

Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390/boot: move sclp early buffer from fixed address in asm to C

To make the decompressor relocatable, the early SCLP buffer with a fixed
address must be replaced with a relocatable C buffer of the according size
and alignment as required by SCLP.

Introduce a new function sclp_early_set_buffer() into the SCLP driver
which enables the decompressor to change the SCLP early buffer at any time.
This will be useful when the decompressor becomes fully relocatable and
might need to change the SCLP early buffer to one with an address < 2G
as required by SCLP because it was loaded at an address >= 2G.

Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390/sclp: use only one sclp early buffer to send commands

A buffer that can be used for communication with SCLP is required
to lie below 2GB memory address. Therefore, both sclp_info_sccb
and sclp_early_sccb must fulfill this requirement if passed directly
to the sclp_early_cmd() function. Instead, use only sclp_early_sccb
for communication with SCLP. This allows the buffer sclp_info_sccb
to be placed anywhere in the memory address space and, therefore,
simplifies the process of making the decompressor relocatable later on,
one thing less to relocate. And make sure that the length of the new unified
early SCLP buffer is no less than the length of the removed sclp_info_sccb
buffer which might be larger than the length of the sclp_early_sccb buffer.

Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390/boot: replace magic string check with a bootdata flag

The magic string "S390EP" at offset 0x10008 indicated to the decompressed
kernel that it was booted by the decompressor. Introduce a new bootdata
flag instead which conveys the same information in an explicit and
a cleaner way. But keep the magic string because it is a kernel ABI.

Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390: setup kernel memory layout early

Currently there are two separate places where kernel memory layout has
to be known and adjusted:
1. early kasan setup.
2. paging setup later.

Those 2 places had to be kept in sync and adjusted to reflect peculiar
technical details of one another. With additional factors which influence
kernel memory layout like ultravisor secure storage limit, complexity
of keeping two things in sync grew up even more.

Besides that if we look forward towards creating identity mapping and
enabling DAT before jumping into uncompressed kernel - that would also
require full knowledge of and control over kernel memory layout.

So, de-duplicate and move kernel memory layout setup logic into
the decompressor.

Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390/ipl: make parameter area accessible via struct parmarea

Since commit 9a965ea95135 ("s390/kexec_file: Simplify parmarea
access") we have struct parmarea which describes the layout of the
kernel parameter area.

Make the kernel parameter area available as global variable parmarea
of type struct parmarea, which allows to easily access its members.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390: unify identity mapping limits handling

Currently we have to consider too many different values which
in the end only affect identity mapping size. These are:
1. max_physmem_end - end of physical memory online or standby.
Always <= end of the last online memory block (get_mem_detect_end()).
2. CONFIG_MAX_PHYSMEM_BITS - the maximum size of physical memory the
kernel is able to support.
3. "mem=" kernel command line option which limits physical memory usage.
4. OLDMEM_BASE which is a kdump memory limit when the kernel is executed as
crash kernel.
5. "hsa" size which is a memory limit when the kernel is executed during
zfcp/nvme dump.

Through out kernel startup and run we juggle all those values at once
but that does not bring any amusement, only confusion and complexity.

Unify all those values to a single one we should really care, that is
our identity mapping size.

Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390/sclp: provide extended sccb support

As the number of cpus increases, the sccb response can exceed 4k for
read cpu and read scp info sclp commands. Hence, all cpu info entries
cant be embedded within a sccb response

Solution:
To overcome this limitation, extended sccb facility is provided by sclp.

1. Check if the extended sccb facility is installed.
2. If extended sccb is installed, perform the read scp and read cpu
command considering a max sccb length of three page size. This max
length is based on factors like max cpus, sccb header.
3. If extended sccb is not installed, perform the read scp and read cpu
sclp command considering a max sccb length of one page size.

Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390: remove orphaned extern variables declarations

arch/s390/kernel/entry.h: suspend_zero_pages - only declaration left
after commit 394216275c7d ("s390: remove broken hibernate / power
management support")

arch/s390/include/asm/setup.h: vmhalt_cmd - only declaration left after
commit 99ca4e582d4a ("[S390] kernel: Shutdown Actions Interface")

arch/s390/include/asm/setup.h: vmpoff_cmd - only declaration left after
commit 99ca4e582d4a ("[S390] kernel: Shutdown Actions Interface")

Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390: remove unused _swsusp_reset_dma

Since commit 394216275c7d ("s390: remove broken hibernate / power
management support") _swsusp_reset_dma is unused and could be safely
removed.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390/pci: Implement ioremap_wc/prot() with MIO

With our current support for the new MIO PCI instructions, write
combining/write back MMIO memory can be obtained via the pci_iomap_wc()
and pci_iomap_wc_range() functions.
This is achieved by using the write back address for a specific bar
as provided in clp_store_query_pci_fn()

These functions are however not widely used and instead drivers often
rely on ioremap_wc() and ioremap_prot(), which on other platforms enable
write combining using a PTE flag set through the pgrprot value.

While we do not have a write combining flag in the low order flag bits
of the PTE like x86_64 does, with MIO support, there is a write back bit
in the physical address (bit 1 on z15) and thus also the PTE.
Which bit is used to toggle write back and whether it is available at
all, is however not fixed in the architecture. Instead we get this
information from the CLP Store Logical Processor Characteristics for PCI
command. When the write back bit is not provided we fall back to the
existing behavior.

Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390: prevent leaking kernel address in BEAR

When userspace executes a syscall or gets interrupted,
BEAR contains a kernel address when returning to userspace.
This make it pretty easy to figure out where the kernel is
mapped even with KASLR enabled. To fix this, add lpswe to
lowcore and always execute it there, so userspace sees only
the lowcore address of lpswe. For this we have to extend
both critical_cleanup and the SWITCH_ASYNC macro to also check
for lpswe addresses in lowcore.

Fixes: b2d24b97b2a9 ("s390/kernel: add support for kernel address space layout randomization (KASLR)")
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390/boot: add dfltcc= kernel command line parameter

Add the new kernel command line parameter 'dfltcc=' to configure s390
zlib hardware support.

Format: { on | off | def_only | inf_only | always }
on: s390 zlib hardware support for compression on
level 1 and decompression (default)
off: No s390 zlib hardware support
def_only: s390 zlib hardware support for deflate
only (compression on level 1)
inf_only: s390 zlib hardware support for inflate
only (decompression)
always: Same as 'on' but ignores the selected compression
level always using hardware support (used for debugging)

Link: http://lkml.kernel.org/r/20200103223334.20669-5-zaslonko@linux.ibm.com
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Eduard Shishkin <edward6@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

s390: remove last diag 0x44 caller

diag 0x44 is a voluntary undirected yield of a virtual CPU. This has
caused a lot of performance issues in the past.

There is only one caller left, and that one is only executed if diag
0x9c (directed yield) is not present. Given that all hypervisors
implement diag 0x9c anyway, remove the last diag 0x44 to avoid that
more callers will be added.

Worst case that could happen now, if diag 0x9c is not present, is that
a virtual CPU would loop a bit instead of giving its time slice up.

diag 0x44 statistics in debugfs are kept and will always be zero, so
that user space can tell that there are no calls.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390: move vmalloc option parsing to startup code

Few other crucial memory setup options are already handled in
the startup code. Those values are needed by kaslr and kasan
implementations. "vmalloc" is the last piece required for future
improvements such as early decision on kernel page levels depth required
for actual memory setup, as well as vmalloc memory area access monitoring
in kasan.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390/boot: add missing declarations and includes

Add __swsusp_reset_dma declaration to avoid the following sparse warnings:
arch/s390/kernel/setup.c:107:15: warning: symbol '__swsusp_reset_dma' was not declared. Should it be static?
arch/s390/boot/startup.c:52:15: warning: symbol '__swsusp_reset_dma' was not declared. Should it be static?

Add verify_facilities declaration to avoid the following sparse warning:
arch/s390/boot/als.c:105:6: warning: symbol 'verify_facilities' was not declared. Should it be static?

Include "boot.h" into arch/s390/boot/kaslr.c to expose get_random_base
function declaration and avoid the following sparse warning:
arch/s390/boot/kaslr.c:90:15: warning: symbol 'get_random_base' was not declared. Should it be static?

Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390: enable detection of kernel version from bzImage

Extend "parmarea" to include an offset of the version string, which is
stored as 8-byte big endian value.

To retrieve version string from bzImage reliably, one should check the
presence of "S390EP" ascii string at 0x10008 (available since v3.2),
then read the version string offset from 0x10428 (which has been 0
since v3.2 up to now). The string is null terminated.

Could be retrieved with the following "file" command magic (requires
file v5.34):
8 string \x02\x00\x00\x18\x60\x00\x00\x50\x02\x00\x00\x68\x60\x00\x00\x50\x40\x40\x40\x40\x40\x40\x40\x40 Linux S390
>0x10008 string S390EP
>>0x10428 bequad >0
>>>(0x10428.Q) string >\0 \b, version %s

Reported-by: Petr Tesarik <ptesarik@suse.com>
Suggested-by: Petr Tesarik <ptesarik@suse.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

arch: replace _BITUL() in kernel-space headers with BIT()

Now that BIT() can be used from assembly code, we can safely replace
_BITUL() with equivalent BIT().

UAPI headers are still required to use _BITUL(), but there is no more
reason to use it in kernel headers. BIT() is shorter.

Link: http://lkml.kernel.org/r/20190609153941.17249-2-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

s390/kernel: add support for kernel address space layout randomization (KASLR)

This patch adds support for relocating the kernel to a random address.
The random kernel offset is obtained from cpacf, using either TRNG, PRNO,
or KMC_PRNG, depending on supported MSA level.

KERNELOFFSET is added to vmcoreinfo, for crash --kaslr support.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/sclp: do not use static sccbs

The sccbs for init/read/sdias/early have to be located below 2 GB, and
they are currently defined as a static buffer.

With a relocatable kernel that could reside at any place in memory, this
will no longer guarantee the location below 2 GB, so use a dynamic
GFP_DMA allocation instead.

The sclp_early_sccb buffer needs special handling, as it can be used
very early, and by both the decompressor and also the decompressed
kernel. Therefore, a fixed 4 KB buffer is introduced at 0x11000, the
former PARMAREA_END. The new PARMAREA_END is now 0x12000, and it is
renamed to HEAD_END, as it is rather the end of head.S and not the end
of the parmarea.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/kexec_file: Simplify parmarea access

Access the parmarea in head.S via a struct instead of individual offsets.

While at it make the fields in the parmarea .quads.

Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/kasan: use noexec and large pages

To lower memory footprint and speed up kasan initialisation detect
EDAT availability and use large pages if possible. As we know how
much memory is needed for initialisation, another simplistic large
page allocator is introduced to avoid memory fragmentation.

Since facilities list is retrieved anyhow, detect noexec support and
adjust pages attributes. Handle noexec kernel option to avoid inconsistent
kasan shadow memory pages flags.

Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/mem_detect: move tprot loop to early boot phase

Move memory detection to early boot phase. To store online memory
regions "struct mem_detect_info" has been introduced together with
for_each_mem_detect_block iterator. mem_detect_info is later converted
to memblock.

Also introduces sclp_early_get_meminfo function to get maximum physical
memory and maximum increment number.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/boot: block uncompressed vmlinux booting attempts

Since the plain vmlinux ELF file no longer carries all necessary parts
for starting up (like the entry point and decompressor), add a check
which would block boot process and encourage users to use bzImage or
arch/s390/boot/compressed/vmlinux instead.

The check relies on s390 linux entry point ABI definition, which is only
present in bzImage and arch/s390/boot/compressed/vmlinux.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/setup: do not reserve the decompressor code

Introduce PARMAREA_END, and use it for memblock reserve of low
memory, which is used for lowcore, kdump data mover code and page
buffer, early stack and parmarea. There is no need to reserve an
area between PARMAREA_END and the decompressor _ehead.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/kexec_file: Prepare setup.h for kexec_file_load

kexec_file_load needs to prepare the new kernels before they are loaded.
For that it has to know the offsets in head.S, e.g. to register the new
command line. Unfortunately there are no macros right now defining those
offsets. Define them now.

Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/lpp: use assembler alternatives for the LPP instruction

With the new macros for CPU alternatives the MACHINE_FLAG_LPP check
around the LPP instruction can be optimized. After this is done the
flag can be removed.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/cpum_sf: correctly set the PID and TID in perf samples

The hardware sampler creates samples that are processed at a later
point in time. The PID and TID values of the perf samples that are
created for hardware samples are initialized with values from the
current task. Hence, the PID and TID values are not correct and
perf samples are associated with wrong processes.

The PID and TID values are obtained from the Host Program Parameter
(HPP) field in the basic-sampling data entries. These PIDs are
valid in the init PID namespace. Ensure that the PIDs in the perf
samples are resolved considering the PID namespace in which the
perf event was created.

To correct the PID and TID values in the created perf samples,
a special overflow handler is installed. It replaces the default
overflow handler and does not become effective if any other
overflow handler is used. With the special overflow handler most
of the perf samples are associated with the right processes.
For processes, that are no longer exist, the association might
still be wrong.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390: remove named saved segment support

Remove the support to create a z/VM named saved segment (NSS). This
feature is not supported since quite a while in favour of jump labels,
function tracing and (now) CPU alternatives. All of these features
require to write to the kernel text section which is not possible if
the kernel is contained within an NSS.

Given that memory savings are minimal if kernel images are shared and
in addition updates of shared images are painful, the NSS feature can
be removed.

Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/vmcp: make use of contiguous memory allocator

If memory is fragmented it is unlikely that large order memory
allocations succeed. This has been an issue with the vmcp device
driver since a long time, since it requires large physical contiguous
memory ares for large responses.

To hopefully resolve this issue make use of the contiguous memory
allocator (cma). This patch adds a vmcp specific vmcp cma area with a
default size of 4MB. The size can be changed either via the
VMCP_CMA_SIZE config option at compile time or with the "vmcp_cma"
kernel parameter (e.g. "vmcp_cma=16m").

For any vmcp response buffers larger than 16k memory from the cma area
will be allocated. If such an allocation fails, there is a fallback to
the buddy allocator.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/time: add support for the TOD clock epoch extension

The TOD epoch extension adds 8 epoch bits to the TOD clock to provide
a continuous clock after 2042/09/17. The store-clock-extended (STCKE)
instruction will store the epoch index in the first byte of the
16 bytes stored by the instruction. The read_boot_clock64 and the
read_presistent_clock64 functions need to take the additional bits
into account to give the correct result after 2042/09/17.

The clock-comparator register will stay 64 bit wide. The comparison
of the clock-comparator with the TOD clock is limited to bytes
1 to 8 of the extended TOD format. To deal with the overflow problem
due to an epoch change the clock-comparator sign control in CR0 can
be used to switch the comparison of the 64-bit TOD clock with the
clock-comparator to a signed comparison.

The decision between the signed vs. unsigned clock-comparator
comparisons is done at boot time. Only if the TOD clock is in the
second half of a 142 year epoch the signed comparison is used.
This solves the epoch overflow issue as long as the machine is
booted at least once in an epoch.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/mm: add no-dat TLB flush optimization

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/mm: tag normal pages vs pages used in page tables

The ESSA instruction has a new option that allows to tag pages that
are not used as a page table. Without the tag the hypervisor has to
assume that any guest page could be used in a page table inside the
guest. This forces the hypervisor to flush all guest TLB entries
whenever a host page table entry is invalidated. With the tag
the host can skip the TLB flush if the page is tagged as normal page.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/spinlock: remove compare and delay instruction

The CAD instruction never worked quite as expected for the spinlock
code. It has been disabled by default with git commit 61b0b01686d48220,
if the "cad" kernel parameter is specified it is enabled for both user
space and the spinlock code. Leave the option to enable the instruction
for user space but remove it from the spinlock code.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390: add a system call for guarded storage

This adds a new system call to enable the use of guarded storage for
user space processes. The system call takes two arguments, a command
and pointer to a guarded storage control block:

s390_guarded_storage(int command, struct gs_cb *gs_cb);

The second argument is relevant only for the GS_SET_BC_CB command.

The commands in detail:

0 - GS_ENABLE
Enable the guarded storage facility for the current task. The
initial content of the guarded storage control block will be
all zeros. After the enablement the user space code can use
load-guarded-storage-controls instruction (LGSC) to load an
arbitrary control block. While a task is enabled the kernel
will save and restore the current content of the guarded
storage registers on context switch.
1 - GS_DISABLE
Disables the use of the guarded storage facility for the current
task. The kernel will cease to save and restore the content of
the guarded storage registers, the task specific content of
these registers is lost.
2 - GS_SET_BC_CB
Set a broadcast guarded storage control block. This is called
per thread and stores a specific guarded storage control block
in the task struct of the current task. This control block will
be used for the broadcast event GS_BROADCAST.
3 - GS_CLEAR_BC_CB
Clears the broadcast guarded storage control block. The guarded-
storage control block is removed from the task struct that was
established by GS_SET_BC_CB.
4 - GS_BROADCAST
Sends a broadcast to all thread siblings of the current task.
Every sibling that has established a broadcast guarded storage
control block will load this control block and will be enabled
for guarded storage. The broadcast guarded storage control block
is used up, a second broadcast without a refresh of the stored
control block with GS_SET_BC_CB will not have any effect.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390: get rid of MACHINE_HAS_PFMF and MACHINE_HAS_HPAGE

Both MACHINE_HAS_PFMF and MACHINE_HAS_HPAGE are just an alias for
MACHINE_HAS_EDAT1. So simply use MACHINE_HAS_EDAT1 instead.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390: add no-execute support

Bit 0x100 of a page table, segment table of region table entry
can be used to disallow code execution for the virtual addresses
associated with the entry.

There is one tricky bit, the system call to return from a signal
is part of the signal frame written to the user stack. With a
non-executable stack this would stop working. To avoid breaking
things the protection fault handler checks the opcode that caused
the fault for 0x0a77 (sys_sigreturn) and 0x0aad (sys_rt_sigreturn)
and injects a system call. This is preferable to the alternative
solution with a stub function in the vdso because it works for
vdso=off and statically linked binaries as well.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/console: Make preferred console handling more consistent

Use the same code structure when determining preferred consoles for
Linux running as KVM guest as with Linux running in LPAR and z/VM
guest:

- Extend the console_mode variable to cover vt220 and hvc consoles
- Determine sensible console defaults in conmode_default()
- Remove KVM-special handling in set_preferred_console()

Ensure that the sclp line mode console is also registered when the
vt220 console was selected to not change existing behavior that
someone might be relying on.

As an externally visible change, KVM guest users can now select
the 3270 or 3215 console devices using the conmode= kernel parameter,
provided that support for the corresponding driver was compiled into
the kernel.

Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jing Liu <liujbjl@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/fault: merge report_user_fault implementations

We have two close to identical report_user_fault functions.
Add a parameter to one and get rid of the other one in order
to reduce code duplication.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/setup: cleanup machine flags

Over time some machine flags got unused (e.g. MACHINE_FLAG_MVPG)
or are available on all 64bit systems (MACHINE_FLAG_CSP,
MACHINE_FLAG_IEEE) - let's remove them.
Reorder the other ones to match the order of the MACHINE_HAS_*
macros and renumber all bits to avoid holes.
Also fix the comment about where the flags are detected.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/cpumf: rework program parameter setting to detect guest samples

The program parameter can be used to mark hardware samples with
some token. Previously, it was used to mark guest samples only.

Improve the program parameter doubleword by combining two parts,
the leftmost LPP part and the rightmost PID part. Set the PID
part for processes by using the task PID.
To distinguish host and guest samples for the kernel (PID part
is zero), the guest must always set the program paramater to a
non-zero value. Use the leftmost bit in the LPP part of the
program parameter to be able to detect guest kernel samples.

[brueckner@linux.vnet.ibm.com]: Split __LC_CURRENT and introduced
__LC_LPP. Corrected __LC_CURRENT users and adjusted assembler parts.
And updated the commit message accordingly.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/entry: add assembler macro to conveniently tests under mask

Various functions in entry.S perform test-under-mask instructions
to test for particular bits in memory. Because test-under-mask uses
a mask value of one byte, the mask value and the offset into the
memory must be calculated manually. This easily introduces errors
and is hard to review and read.

Introduce the TSTMSK assembler macro to specify a mask constant and
let the macro calculate the offset and the byte mask to generate a
test-under-mask instruction. The benefit is that existing symbolic
constants can now be used for tests. Also the macro checks for
zero mask values and mask values that consist of multiple bytes.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390: remove 31 bit support

Remove the 31 bit support in order to reduce maintenance cost and
effectively remove dead code. Since a couple of years there is no
distribution left that comes with a 31 bit kernel.

The 31 bit kernel also has been broken since more than a year before
anybody noticed. In addition I added a removal warning to the kernel
shown at ipl for 5 minutes: a960062e5826 ("s390: add 31 bit warning
message") which let everybody know about the plan to remove 31 bit
code. We didn't get any response.

Given that the last 31 bit only machine was introduced in 1999 let's
remove the code.
Anybody with 31 bit user space code can still use the compat mode.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/spinlock: add compare-and-delay to lock wait loops

Add the compare-and-delay instruction to the spin-lock and rw-lock
retry loops. A CPU executing the compare-and-delay instruction stops
until the lock value has changed. This is done to make the locking
code for contended locks to behave better in regard to the multi-
hreading facility. A thread of a core executing a compare-and-delay
will allow the other threads of a core to get a larger share of the
core resources.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390: add support for vector extension

The vector extension introduces 32 128-bit vector registers and a set of
instruction to operate on the vector registers.

The kernel can control the use of vector registers for the problem state
program with a bit in control register 0. Once enabled for a process the
kernel needs to retain the content of the vector registers on context
switch. The signal frame is extended to include the vector registers.
Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added
to the regset interface for the debugger and core dumps.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390: remove unused MACHINE_FLAG_RRBM

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/mm: Convert bootmem to memblock

The original bootmem allocator is getting replaced by memblock. To
cover the needs of the s390 kdump implementation the physical memory
list is used.
With this patch the bootmem allocator and its bitmaps are completely
removed from s390.

Signed-off-by: Philipp Hachtmann <phacht@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/mm,tlb: optimize TLB flushing for zEC12

The zEC12 machines introduced the local-clearing control for the IDTE
and IPTE instruction. If the control is set only the TLB of the local
CPU is cleared of entries, either all entries of a single address space
for IDTE, or the entry for a single page-table entry for IPTE.
Without the local-clearing control the TLB flush is broadcasted to all
CPUs in the configuration, which is expensive.

The reset of the bit mask of the CPUs that need flushing after a
non-local IDTE is tricky. As TLB entries for an address space remain
in the TLB even if the address space is detached a new bit field is
required to keep track of attached CPUs vs. CPUs in the need of a
flush. After a non-local flush with IDTE the bit-field of attached CPUs
is copied to the bit-field of CPUs in need of a flush. The ordering
of operations on cpu_attach_mask, attach_count and mm_cpumask(mm) is
such that an underindication in mm_cpumask(mm) is prevented but an
overindication in mm_cpumask(mm) is possible.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/setup: get rid of MACHINE_HAS_MVCOS machine flag

MACHINE_HAS_MVCOS is used exactly once when the machine is brought up.
There is no need to cache the flag in the machine_flags.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/sclp: Determine HSA size dynamically for zfcpdump

Currently we have hardcoded the HSA size to 32 MiB. With this patch the
HSA size is determined dynamically via SCLP in early.c.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/uaccess: always run the kernel in home space

Simplify the uaccess code by removing the user_mode=home option.
The kernel will now always run in the home space mode.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/mem_detect: remove artificial kdump memory types

Simplify the memory detection code a bit by removing the CHUNK_OLDMEM
and CHUNK_CRASHK memory types.
They are not needed. Everything that is needed is a mechanism to
insert holes into the detected memory.

Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/mem_detect: limit memory detection loop to "mem=" parameter

The current memory detection loop will detect all present memory of
a machine. This is true even if the user specified the "mem=" parameter
on the kernel command line.
This can be a problem since the memory detection may cause a fully
populated host page table for the guest, even for those parts of the
memory that the guest will never use afterwards.

So fix this and only detect memory up to a user supplied "mem=" limit
if specified.

Reported-by: Michael Johanssen <johanssn@de.ibm.com>
Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390: get rid of odd global real_memory_size

The variable real_memory_size has odd semantics and has been used in
a broken way by e.g. the old kvm code.
Therefore get rid of it before anybody else makes use of it.

Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/cleanup: rename SPP to LPP

The set-program-parameter (SPP) instruction has been renamed to
load-program-parameter (LPP) (see SA23-2260). Reflect this change
and rename all macro/instruction references.

Also remove the duplicate SPP/LPP entry in the kernel disassembler
instruction list.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/mm: implement software dirty bits

The s390 architecture is unique in respect to dirty page detection,
it uses the change bit in the per-page storage key to track page
modifications. All other architectures track dirty bits by means
of page table entries. This property of s390 has caused numerous
problems in the past, e.g. see git commit ef5d437f71afdf4a
"mm: fix XFS oops due to dirty pages without buffers on s390".

To avoid future issues in regard to per-page dirty bits convert
s390 to a fault based software dirty bit detection mechanism. All
user page table entries which are marked as clean will be hardware
read-only, even if the pte is supposed to be writable. A write by
the user process will trigger a protection fault which will cause
the user pte to be marked as dirty and the hardware read-only bit
is removed.

With this change the dirty bit in the storage key is irrelevant
for Linux as a host, but the storage key is still required for
KVM guests. The effect is that page_test_and_clear_dirty and the
related code can be removed. The referenced bit in the storage
key is still used by the page_test_and_clear_young primitive to
provide page age information.

For page cache pages of mappings with mapping_cap_account_dirty
there will not be any change in behavior as the dirty bit tracking
already uses read-only ptes to control the amount of dirty pages.
Only for swap cache pages and pages of mappings without
mapping_cap_account_dirty there can be additional protection faults.
To avoid an excessive number of additional faults the mk_pte
primitive checks for PageDirty if the pgprot value allows for writes
and pre-dirties the pte. That avoids all additional faults for
tmpfs and shmem pages until these pages are added to the swap cache.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/mm: use pfmf instruction to initialize storage keys

Make use of the pfmf instruction, if available, to initialize storage keys
of whole 1MB or 2GB frames instead of initializing every single page with
the sske instruction.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/facilities: cleanup PFMF and HPAGE machine facility detection

MACHINE_HAS_PFMF and MACHINE_HAS_HPAGE actually have the same semantics:
the cpu has the EDAT1 facility installed in zArch mode. So remove one
of the feature flags in machine_flags and rename the other one to EDAT1.

The two old macros simply get mapped to MACHINE_HAS_EDAT1.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

UAPI: (Scripted) Disintegrate arch/s390/include/asm

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>

thp, s390: architecture backend for thp on s390

This implements the architecture backend for transparent hugepages
on s390.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

s390/mm: rename addressing_mode to s390_user_mode

Renaming the globally visible variable "user_mode" to "addressing_mode" in
order to fix a name clash was not a good idea. (Commit 37fe1d73 "s390/mm:
rename user_mode variable to addressing_mode")
Looking at the code after a couple of weeks one thinks: addressing mode of
what?
So rename the variable again. This time to s390_user_mode. Which hopefully
makes more sense.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390: add support for transactional memory

Allow user-space processes to use transactional execution (TX).
If the TX facility is available user space programs can use
transactions for fine-grained serialization based on the data
objects that are referenced during a transaction. This is
useful for lockless data structures and speculative compiler
optimizations.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/mm: rename user_mode variable to addressing_mode

Fix name clash with user_mode() define which is also used in common code.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/comments: unify copyright messages and remove file names

Remove the file name from the comment at top of many files. In most
cases the file name was wrong anyway, so it's rather pointless.

Also unify the IBM copyright statement. We did have a lot of sightly
different statements and wanted to change them one after another
whenever a file gets touched. However that never happened. Instead
people start to take the old/"wrong" statements to use as a template
for new files.
So unify all of them in one go.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

s390/headers: replace __s390x__ with CONFIG_64BIT where possible

Replace __s390x__ with CONFIG_64BIT in all places that are not exported
to userspace or guarded with #ifdef __KERNEL__.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/time: always use stckf instead of stck if available

The store clock fast instruction saves a couple of instructions compared
to the store clock instruction. Always use stckf instead of stck if it
is available.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Disintegrate asm/system.h for S390

Disintegrate asm/system.h for S390.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-s390@vger.kernel.org

[S390] avoid STCKF if running in ESA mode

In ESA mode STCKF is not defined even if the facility bit is enabled.
To prevent an illegal operation we must also check if we run a 64 bit kernel.
To make the check perform well add the STCKF bit to the machine flags.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] kdump backend code

This patch provides the architecture specific part of the s390 kdump
support.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] topology: clean up facility detection

Move cpu topology facility detection to early setup code where it
should be.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] virtualization aware cpu measurement

Use the SPP instruction to set a tag on entry to / exit of the virtual
machine context. This allows the cpu measurement facility to distinguish
the samples from the host and the different guests.

Signed-off-by: Carsten Otte <cotte@de.ibm.com>

[S390] Cleanup struct _lowcore usage and defines.

Use asm offsets to make sure the offset defines to struct _lowcore and
its layout don't get out of sync.
Also add a BUILD_BUG_ON() which checks that the size of the structure
is sane.
And while being at it change those sites which use odd casts to access
the current lowcore. These should use S390_lowcore instead.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] add MACHINE_IS_LPAR flag

Introduce the MACHINE_IS_LPAR flag for code that should only be
executed if Linux is running in an LPAR.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] Improve address space mode selection.

Introduce user_mode to replace the two variables switch_amode and
s390_noexec. There are three valid combinations of the old values:
1) switch_amode == 0 && s390_noexec == 0
2) switch_amode == 1 && s390_noexec == 0
3) switch_amode == 1 && s390_noexec == 1
They get replaced by
1) user_mode == HOME_SPACE_MODE
2) user_mode == PRIMARY_SPACE_MODE
3) user_mode == SECONDARY_SPACE_MODE
The new kernel parameter user_mode=[primary,secondary,home] lets
you choose the address space mode the user space processes should
use. In addition the CONFIG_S390_SWITCH_AMODE config option
is removed.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] kernel: Append scpdata to kernel boot command line

Append scpdata to the kernel boot command line. If scpdata starts
with the equal sign (=), the kernel boot command line is replaced.
(For consistency with zIPL and IPL PARM parameters.)

To use scpdata for the kernel boot command line, scpdata must consist
of ascii characters only. If scpdata contains other characters,
scpdata is not appended to the kernel boot command line.
In addition, re-IPL is extended for setting scpdata for the next
Linux reboot.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] s390: move machine flags to lowcore

Currently the storage of the machine flags is a globally exported unsigned
long long variable. By moving the storage location into the lowcore struct we
allow assembler code to check machine_flags directly even without needing a
register. Addtionally the lowcore and therefore the machine flags too will be
in cache most of the time.

Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] fix "mem=" handling in case of standby memory

Standby memory detected with the sclp interface gets always registered
with add_memory calls without considering the limitationt that the
"mem=" kernel paramater implies.
So fix this and only register standby memory that is below the specified
limit.
This fixes zfcpdump since it uses "mem=32M". In case there is appr.
2GB standby memory present all of usable memory would be used for the
struct pages needed for standby memory.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] move include/asm-s390 to arch/s390/include/asm

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>