kprobes: unify kprobes_exceptions_nofify() prototypes

Most architectures that support kprobes declare this function in their
own asm/kprobes.h header and provide an override, but some are missing
the prototype, which causes a warning for the __weak stub implementation:

kernel/kprobes.c:1865:12: error: no previous prototype for 'kprobe_exceptions_notify' [-Werror=missing-prototypes]
1865 | int __weak kprobe_exceptions_notify(struct notifier_block *self,

Move the prototype into linux/kprobes.h so it is visible to all
the definitions.

Link: https://lore.kernel.org/all/20231108125843.3806765-4-arnd@kernel.org/

Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

s390/ctlreg: add struct ctlreg

Add struct ctlreg to enforce strict type checking / usage for control
register functions.

Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390/rethook: add local rethook header file

Compiling the kernel with CONFIG_KPROBES disabled, but CONFIG_RETHOOK
enabled, results in this sparse warning:

arch/s390/kernel/rethook.c:26:15: warning: no previous prototype for 'arch_rethook_trampoline_callback' [-Wmissing-prototypes]
26 | unsigned long arch_rethook_trampoline_callback(struct pt_regs *regs)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Add a local rethook header file similar to riscv to address this.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: 1a280f48c0e4 ("s390/kprobes: replace kretprobe with rethook")
Link: https://lore.kernel.org/all/202302030102.69dZIuJk-lkp@intel.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390/kprobes: replace kretprobe with rethook

That's an adaptation of commit f3a112c0c40d ("x86,rethook,kprobes:
Replace kretprobe with rethook on x86") to s390.

Replaces the kretprobe code with rethook on s390. With this patch,
kretprobe on s390 uses the rethook instead of kretprobe specific
trampoline code.

Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390/kprobes: Avoid additional kprobe in kretprobe handling

So far, s390 registered a krobe on __kretprobe_trampoline which is
called everytime a kretprobe fires. This kprobe would then determine
the correct return address and adjust the psw accordingly, such that
the kretprobe would branch to the appropriate address after completion.

Some other archs handle kretprobes without such an additional kprobe.
This approach is adopted to s390 with this patch.
Furthermore, the __kretprobe_trampoline now uses an assembler function
to correctly gather the register and psw content to be passed to the
registered kretprobe handler as struct pt_regs. After completion, the
register content and the psw are set based on the contents of said
pt_regs struct.
Note that a change to the psw address in struct pt_regs will not have
an impact, as the probe will still return to the original return
address of the probed function.
The return address is now recovered by using the appropriate function
arch_kretprobe_fixup_return.

The no longer needed kprobe is removed.

Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Tobias Huschle <huschle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

kprobes: treewide: Make it harder to refer kretprobe_trampoline directly

Since now there is kretprobe_trampoline_addr() for referring the
address of kretprobe trampoline code, we don't need to access
kretprobe_trampoline directly.

Make it harder to refer by renaming it to __kretprobe_trampoline().

Link: https://lkml.kernel.org/r/163163045446.489837.14510577516938803097.stgit@devnote2

Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

s390: support KPROBES_ON_FTRACE

Instead of using our own kprobes-on-ftrace handling convert the
code to support KPROBES_ON_FTRACE.

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390/kprobes: Remove jprobe implementation

Remove arch dependent setjump/longjump functions
and unused fields in kprobe_ctlblk for jprobes
from arch/s390.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-arch@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Link: https://lore.kernel.org/lkml/152942453967.15209.8535227381029256754.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>

s390: include: Remove redundant license text

Now that the SPDX tag is in all arch/s390/include/ files, that
identifies the license in a specific and legally-defined manner. So the
extra GPL text wording can be removed as it is no longer needed at all.

This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.

No copyright headers or other non-license-description text was removed.

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Halil Pasic <pasic@linux.vnet.ibm.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390: add SPDX identifiers to the remaining files

It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.

Update the remaining arch/s390/ files with the correct SPDX license
identifier based on the license text in the file itself. The SPDX
identifier is a legally binding shorthand, which can be used instead of
the full boiler plate text.

This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/kprobes: remove KPROBE_SWAP_INST state

For an unknown reason the s390 kprobes instruction replacement
function modifies the kprobe_status of the current CPU to
KPROBE_SWAP_INST. This was supposed to catch traps that happened
during instruction patching. Such a fault is not supposed to happen,
and silently discarding such a fault is certainly also not what we
want. In fact s390 is the only architecture which has this odd piece
of code.

Just remove this and behave like all other architectures. This was
pointed out by Jens Remus.

Reported-by: Jens Remus <jremus@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/uprobes: fix compile for !KPROBES

Fix the following compile error(s) if CONFIG_KPROBES is disabled:

arch/s390/kernel/uprobes.c:79:14:
error: implicit declaration of function 'probe_get_fixup_type'
arch/s390/kernel/uprobes.c:87:14:
error: 'FIXUP_PSW_NORMAL' undeclared (first use in this function)

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

sched/headers: Prepare for new header dependencies before moving code to <linux/sched/task_stack.h>

We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/task_stack.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

kprobes: move kprobe declarations to asm-generic/kprobes.h

Often all is needed is these small helpers, instead of compiler.h or a
full kprobes.h. This is important for asm helpers, in fact even some
asm/kprobes.h make use of these helpers... instead just keep a generic
asm file with helpers useful for asm code with the least amount of
clutter as possible.

Likewise we need now to also address what to do about this file for both
when architectures have CONFIG_HAVE_KPROBES, and when they do not. Then
for when architectures have CONFIG_HAVE_KPROBES but have disabled
CONFIG_KPROBES.

Right now most asm/kprobes.h do not have guards against CONFIG_KPROBES,
this means most architecture code cannot include asm/kprobes.h safely.
Correct this and add guards for architectures missing them.
Additionally provide architectures that not have kprobes support with
the default asm-generic solution. This lets us force asm/kprobes.h on
the header include/linux/kprobes.h always, but most importantly we can
now safely include just asm/kprobes.h on architecture code without
bringing the full kitchen sink of header files.

Two architectures already provided a guard against CONFIG_KPROBES on its
kprobes.h: sh, arch. The rest of the architectures needed gaurds added.
We avoid including any not-needed headers on asm/kprobes.h unless
kprobes have been enabled.

In a subsequent atomic change we can try now to remove compiler.h from
include/linux/kprobes.h.

During this sweep I've also identified a few architectures defining a
common macro needed for both kprobes and ftrace, that of the definition
of the breakput instruction up. Some refer to this as
BREAKPOINT_INSTRUCTION. This must be kept outside of the #ifdef
CONFIG_KPROBES guard.

[mcgrof@kernel.org: fix arm64 build]
Link: http://lkml.kernel.org/r/CAB=NE6X1WMByuARS4mZ1g9+W=LuVBnMDnh_5zyN0CLADaVh=Jw@mail.gmail.com
[sfr@canb.auug.org.au: fixup for kprobes declarations moving]
Link: http://lkml.kernel.org/r/20170214165933.13ebd4f4@canb.auug.org.au
Link: http://lkml.kernel.org/r/20170203233139.32682-1-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

s390: stack address vs thread_info

Avoid using the address of a process' thread_info structure as the
kernel stack address. This will break as soon as the thread_info
structure will be removed from the stack, and in addition it makes the
code a bit more understandable.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/ftrace,kprobes: allow to patch first instruction

If the function tracer is enabled, allow to set kprobes on the first
instruction of a function (which is the function trace caller):

If no kprobe is set handling of enabling and disabling function tracing
of a function simply patches the first instruction. Either it is a nop
(right now it's an unconditional branch, which skips the mcount block),
or it's a branch to the ftrace_caller() function.

If a kprobe is being placed on a function tracer calling instruction
we encode if we actually have a nop or branch in the remaining bytes
after the breakpoint instruction (illegal opcode).
This is possible, since the size of the instruction used for the nop
and branch is six bytes, while the size of the breakpoint is only
two bytes.
Therefore the first two bytes contain the illegal opcode and the last
four bytes contain either "0" for nop or "1" for branch. The kprobes
code will then execute/simulate the correct instruction.

Instruction patching for kprobes and function tracer is always done
with stop_machine(). Therefore we don't have any races where an
instruction is patched concurrently on a different cpu.
Besides that also the program check handler which executes the function
trace caller instruction won't be executed concurrently to any
stop_machine() execution.

This allows to keep full fault based kprobes handling which generates
correct pt_regs contents automatically.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/uprobes: common library for kprobes and uprobes

This patch moves common functions from kprobes.c to probes.c.
Thus its possible for uprobes to use them without enabling kprobes.

Signed-off-by: Jan Willeke <willeke@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/kprobes: add support for pc-relative long displacement instructions

With the general-instruction extension facility (z10) a couple of
instructions with a pc-relative long displacement were introduced. The
kprobes support for these instructions however was never implemented.

In result, if anybody ever put a probe on any of these instructions the
result would have been random behaviour after the instruction got executed
within the insn slot.

So lets add the missing handling for these instructions. Since all of the
new instructions have 32 bit signed displacement the easiest solution is
to allocate an insn slot that is within the same 2GB area like the
original instruction and patch the displacement field.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

s390/comments: unify copyright messages and remove file names

Remove the file name from the comment at top of many files. In most
cases the file name was wrong anyway, so it's rather pointless.

Also unify the IBM copyright statement. We did have a lot of sightly
different statements and wanted to change them one after another
whenever a file gets touched. However that never happened. Instead
people start to take the old/"wrong" statements to use as a template
for new files.
So unify all of them in one go.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

[S390] kprobes: jprobe save and restore

Register %r14 and %r15 are already stored in jprobe_saved_regs, no need
to store them a second time in jprobe_saved_r14 / jprobe_saved_r15.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] kprobes: insn slots

The s390 architecture can execute code on kmalloc/vmalloc memory.
No need for the __ARCH_WANT_KPROBES_INSN_SLOT detour.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] kprobes: instruction fixup

Determine instruction fixup details in resume_execution, no need to do
it beforehand. Remove fixup, ilen and reg from arch_specific_insn.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] kprobes: instruction swap

Move the definition of the helper structure ins_replace_args to the
only place where it is used and drop the old member as it is not needed.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] kprobes: single step cleanup

The saved interrupt mask and the saved control registers are only
relevant while single stepping is set up. A secondary kprobe while
kprobe single stepping is active may not occur. That makes is safe
to remove the save and restore of kprobe_saved_imask / kprobe_save_ctl
from save_previous_kprobe and restore_previous_kprobe.
Move all single step related code to two functions, enable_singlestep
and disable_singlestep.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] move include/asm-s390 to arch/s390/include/asm

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>