RISC-V: KVM: Allow Zacas extension for Guest/VM

Extend the KVM ISA extension ONE_REG interface to allow KVM user space
to detect and enable Zacas extension for Guest/VM.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Allow Ztso extension for Guest/VM

Extend the KVM ISA extension ONE_REG interface to allow KVM user space
to detect and enable Ztso extension for Guest/VM.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

kvm: replace __KVM_HAVE_READONLY_MEM with Kconfig symbol

KVM uses __KVM_HAVE_* symbols in the architecture-dependent uapi/asm/kvm.h to mask
unused definitions in include/uapi/linux/kvm.h. __KVM_HAVE_READONLY_MEM however
was nothing but a misguided attempt to define KVM_CAP_READONLY_MEM only on
architectures where KVM_CHECK_EXTENSION(KVM_CAP_READONLY_MEM) could possibly
return nonzero. This however does not make sense, and it prevented userspace
from supporting this architecture-independent feature without recompilation.

Therefore, these days __KVM_HAVE_READONLY_MEM does not mask anything and
is only used in virt/kvm/kvm_main.c. Userspace does not need to test it
and there should be no need for it to exist. Remove it and replace it
with a Kconfig symbol within Linux source code.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

RISC-V: KVM: Allow Zfa extension for Guest/VM

We extend the KVM ISA extension ONE_REG interface to allow KVM
user space to detect and enable Zfa extension for Guest/VM.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Allow Zvfh[min] extensions for Guest/VM

We extend the KVM ISA extension ONE_REG interface to allow KVM
user space to detect and enable Zvfh[min] extensions for Guest/VM.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Allow Zihintntl extension for Guest/VM

We extend the KVM ISA extension ONE_REG interface to allow KVM
user space to detect and enable Zihintntl extension for Guest/VM.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Allow Zfh[min] extensions for Guest/VM

We extend the KVM ISA extension ONE_REG interface to allow KVM
user space to detect and enable Zfh[min] extensions for Guest/VM.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Allow vector crypto extensions for Guest/VM

We extend the KVM ISA extension ONE_REG interface to allow KVM
user space to detect and enable vector crypto extensions for
Guest/VM. This includes extensions Zvbb, Zvbc, Zvkb, Zvkg,
Zvkned, Zvknha, Zvknhb, Zvksed, Zvksh, and Zvkt.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Allow scalar crypto extensions for Guest/VM

We extend the KVM ISA extension ONE_REG interface to allow KVM
user space to detect and enable scalar crypto extensions for
Guest/VM. This includes extensions Zbkb, Zbkc, Zbkx, Zknd, Zkne,
Zknh, Zkr, Zksed, Zksh, and Zkt.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Allow Zbc extension for Guest/VM

We extend the KVM ISA extension ONE_REG interface to allow KVM
user space to detect and enable Zbc extension for Guest/VM.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Add support for SBI STA registers

KVM userspace needs to be able to save and restore the steal-time
shared memory address. Provide the address through the get/set-one-reg
interface with two ulong-sized SBI STA extension registers (lo and hi).
64-bit KVM userspace must not set the hi register to anything other
than zero and is allowed to completely neglect saving/restoring it.

Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Add support for SBI extension registers

Some SBI extensions have state that needs to be saved / restored
when migrating the VM. Provide a get/set-one-reg register type
for SBI extension registers. Each SBI extension that uses this type
will have its own subtype. There are currently no subtypes defined.
The next patch introduces the first one.

Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Add SBI STA extension skeleton

Add the files and functions needed to support the SBI STA
(steal-time accounting) extension. In the next patches we'll
complete the functions to fully enable SBI STA support.

Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Forward SBI DBCN extension to user-space

The frozen SBI v2.0 specification defines the SBI debug console
(DBCN) extension which replaces the legacy SBI v0.1 console
functions namely sbi_console_getchar() and sbi_console_putchar().

The SBI DBCN extension needs to be emulated in the KVM user-space
(i.e. QEMU-KVM or KVMTOOL) so we forward SBI DBCN calls from KVM
guest to the KVM user-space which can then redirect the console
input/output to wherever it wants (e.g. telnet, file, stdio, etc).

The SBI debug console is simply a early console available to KVM
guest for early prints and it does not intend to replace the proper
console devices such as 8250, VirtIO console, etc.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Allow Zicond extension for Guest/VM

We extend the KVM ISA extension ONE_REG interface to allow KVM
user space to detect and enable Zicond extension for Guest/VM.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISCV: KVM: Add sstateen0 to ONE_REG

Add support for sstateen0 CSR to the ONE_REG interface to allow its
access from user space.

Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISCV: KVM: Add senvcfg context save/restore

Add senvcfg context save/restore for guest VCPUs and also add it to the
ONE_REG interface to allow its access from user space.

Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Enable Smstateen accesses

Configure hstateen0 register so that the AIA state and envcfg are
accessible to the vcpus. This includes registers such as siselect,
sireg, siph, sieh and all the IMISC registers.

Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: provide UAPI for host SATP mode

KVM userspaces need to be aware of the host SATP to allow them to
advertise it back to the guest OS.

Since this information is used to build the guest FDT we can't wait for
the SATP reg to be readable. We just need to read the SATP mode, thus
we can use the existing 'satp_mode' global that represents the SATP reg
with MODE set and both ASID and PPN cleared. E.g. for a 32 bit host
running with sv32 satp_mode is 0x80000000, for a 64 bit host running
sv57 satp_mode is 0xa000000000000000, and so on.

Add a new userspace virtual config register 'satp_mode' to allow
userspace to read the current SATP mode the host is using with
GET_ONE_REG API before spinning the vcpu.

'satp_mode' can't be changed via KVM, so SET_ONE_REG is allowed as long
as userspace writes the existing 'satp_mode'.

Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Allow Zicntr, Zicsr, Zifencei, and Zihpm for Guest/VM

We extend the KVM ISA extension ONE_REG interface to allow KVM
user space to detect and enable Zicntr, Zicsr, Zifencei, and Zihpm
extensions for Guest/VM.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Allow Zba and Zbs extensions for Guest/VM

We extend the KVM ISA extension ONE_REG interface to allow KVM
user space to detect and enable Zba and Zbs extensions for Guest/VM.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Extend ONE_REG to enable/disable multiple ISA extensions

Currently, the ISA extension ONE_REG interface only allows enabling or
disabling one extension at a time. To improve this, we extend the ISA
extension ONE_REG interface (similar to SBI extension ONE_REG interface)
so that KVM user space can enable/disable multiple extensions in one
ioctl.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Allow Svnapot extension for Guest/VM

We extend the KVM ISA extension ONE_REG interface to allow KVM
user space to detect and enable Svnapot extension for Guest/VM.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Expose IMSIC registers as attributes of AIA irqchip

We expose IMSIC registers as KVM device attributes of the in-kernel
AIA irqchip device. This will allow KVM user-space to save/restore
IMISC state of each VCPU using KVM device ioctls().

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Expose APLIC registers as attributes of AIA irqchip

We expose APLIC registers as KVM device attributes of the in-kernel
AIA irqchip device. This will allow KVM user-space to save/restore
APLIC state using KVM device ioctls().

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Implement device interface for AIA irqchip

We implement KVM device interface for in-kernel AIA irqchip so that
user-space can use KVM device ioctls to create, configure, and destroy
in-kernel AIA irqchip.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Skeletal in-kernel AIA irqchip support

To incrementally implement in-kernel AIA irqchip support, we first
add minimal skeletal support which only compiles but does not provide
any functionality.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

riscv: KVM: Add vector lazy save/restore support

This patch adds vector context save/restore for guest VCPUs. To reduce the
impact on KVM performance, the implementation imitates the FP context
switch mechanism to lazily store and restore the vector context only when
the kernel enters/exits the in-kernel run loop and not during the KVM
world switch.

Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20230605110724.21391-20-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: kvm: Add V extension to KVM ISA

Add V extension to KVM isa extension list to enable supporting of V
extension on VCPUs.

Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20230605110724.21391-19-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

RISC-V: KVM: Virtualize per-HART AIA CSRs

The AIA specification introduce per-HART AIA CSRs which primarily
support:
* 64 local interrupts on both RV64 and RV32
* priority for each of the 64 local interrupts
* interrupt filtering for local interrupts

This patch virtualize above mentioned AIA CSRs and also extend
ONE_REG interface to allow user-space save/restore Guest/VM
view of these CSRs.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Add ONE_REG interface for AIA CSRs

We implement ONE_REG interface for AIA CSRs as a separate subtype
under the CSR ONE_REG interface.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Implement subtype for CSR ONE_REG interface

To make the CSR ONE_REG interface extensible, we implement subtype
for the CSR ONE_REG IDs. The existing CSR ONE_REG IDs are treated
as subtype = 0 (aka General CSRs).

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Allow Zbb extension for Guest/VM

We extend the KVM ISA extension ONE_REG interface to allow KVM
user space to detect and enable Zbb extension for Guest/VM.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Add ONE_REG interface to enable/disable SBI extensions

We add ONE_REG interface to enable/disable SBI extensions (just
like the ONE_REG interface for ISA extensions). This allows KVM
user-space to decide the set of SBI extension enabled for a Guest
and by default all SBI extensions are enabled.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Expose Zicboz to the guest

Guests may use the cbo.zero instruction when the CPU has the Zicboz
extension and the hypervisor sets henvcfg.CBZE.

Add Zicboz support for KVM guests which may be enabled and
disabled from KVM userspace using the ISA extension ONE_REG API.

Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20230224162631.405473-9-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

RISC-V: KVM: Provide UAPI for Zicboz block size

We're about to allow guests to use the Zicboz extension. KVM
userspace needs to know the cache block size in order to
properly advertise it to the guest. Provide a virtual config
register for userspace to get it with the GET_ONE_REG API, but
setting it cannot be supported, so disallow SET_ONE_REG.

Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20230224162631.405473-8-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

RISC-V: KVM: Add ONE_REG interface for mvendorid, marchid, and mimpid

We add ONE_REG interface for VCPU mvendorid, marchid, and mimpid
so that KVM user-space can change this details to support migration
across heterogeneous hosts.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Expose Zicbom to the guest

Guests may use the cbo.inval,clean,flush instructions when the
CPU has the Zicbom extension and the hypervisor sets henvcfg.CBIE
(for cbo.inval) and henvcfg.CBCFE (for cbo.clean,flush).

Add Zicbom support for KVM guests which may be enabled and
disabled from KVM userspace using the ISA extension ONE_REG API.

Also opportunistically switch the other isa extension checks in
kvm_riscv_vcpu_update_config() to riscv_isa_extension_available().

Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Provide UAPI for Zicbom block size

We're about to allow guests to use the Zicbom extension. KVM
userspace needs to know the cache block size in order to
properly advertise it to the guest. Provide a virtual config
register for userspace to get it with the GET_ONE_REG API, but
setting it cannot be supported, so disallow SET_ONE_REG.

Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Allow Guest use Zihintpause extension

We should advertise Zihintpause ISA extension to KVM user-space whenever
host supports it. This will allow KVM user-space (i.e. QEMU or KVMTOOL)
to pass on this information to Guest via ISA string.

Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Allow Guest use Svinval extension

We should advertise Svinval ISA extension to KVM user-space whenever
host supports it. This will allow KVM user-space (i.e. QEMU or KVMTOOL)
to pass on this information to Guest via ISA string.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Support sstc extension

Sstc extension allows the guest to program the vstimecmp CSR directly
instead of making an SBI call to the hypervisor to program the next
event. The timer interrupt is also directly injected to the guest by
the hardware in this case. To maintain backward compatibility, the
hypervisors also update the vstimecmp in an SBI set_time call if
the hardware supports it. Thus, the older kernels in guest also
take advantage of the sstc extension.

Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Acked-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/all/CAAhSdy2mb6wyqy0NAn9BcTWKMYEc0Z4zU3s3j7oNqBz6eDQ9sg@mail.gmail.com/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

RISC-V: KVM: Add support for Svpbmt inside Guest/VM

The Guest/VM can use Svpbmt in VS-stage page tables when allowed by the
Hypervisor using the henvcfg.PBMTE bit.

We add Svpbmt support for the KVM Guest/VM which can be enabled/disabled
by the KVM user-space (QEMU/KVMTOOL) using the ISA extension ONE_REG
interface.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Introduce ISA extension register

Currently, there is no provision for vmm (qemu-kvm or kvmtool) to
query about multiple-letter ISA extensions. The config register
is only used for base single letter ISA extensions.

A new ISA extension register is added that will allow the vmm
to query about any ISA extension one at a time. It is enabled for
both single letter or multi-letter ISA extensions. The ISA extension
register is useful to if the vmm requires to retrieve/set single
extension while the config register should be used if all the base
ISA extension required to retrieve or set.

For any multi-letter ISA extensions, the new register interface
must be used.

Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

RISC-V: KVM: Implement ONE REG interface for FP registers

Add a KVM_GET_ONE_REG/KVM_SET_ONE_REG ioctl interface for floating
point registers such as F0-F31 and FCSR. This support is added for
both 'F' and 'D' extensions.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>

RISC-V: KVM: Add timer functionality

The RISC-V hypervisor specification doesn't have any virtual timer
feature.

Due to this, the guest VCPU timer will be programmed via SBI calls.
The host will use a separate hrtimer event for each guest VCPU to
provide timer functionality. We inject a virtual timer interrupt to
the guest VCPU whenever the guest VCPU hrtimer event expires.

This patch adds guest VCPU timer implementation along with ONE_REG
interface to access VCPU timer state from user space.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>

RISC-V: KVM: Implement KVM_GET_ONE_REG/KVM_SET_ONE_REG ioctls

For KVM RISC-V, we use KVM_GET_ONE_REG/KVM_SET_ONE_REG ioctls to access
VCPU config and registers from user-space.

We have three types of VCPU registers:
1. CONFIG - these are VCPU config and capabilities
2. CORE - these are VCPU general purpose registers
3. CSR - these are VCPU control and status registers

The CONFIG register available to user-space is ISA. The ISA register is
a read and write register where user-space can only write the desired
VCPU ISA capabilities before running the VCPU.

The CORE registers available to user-space are PC, RA, SP, GP, TP, A0-A7,
T0-T6, S0-S11 and MODE. Most of these are RISC-V general registers except
PC and MODE. The PC register represents program counter whereas the MODE
register represent VCPU privilege mode (i.e. S/U-mode).

The CSRs available to user-space are SSTATUS, SIE, STVEC, SSCRATCH, SEPC,
SCAUSE, STVAL, SIP, and SATP. All of these are read/write registers.

In future, more VCPU register types will be added (such as FP) for the
KVM_GET_ONE_REG/KVM_SET_ONE_REG ioctls.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>

RISC-V: KVM: Implement VCPU interrupts and requests handling

This patch implements VCPU interrupts and requests which are both
asynchronous events.

The VCPU interrupts can be set/unset using KVM_INTERRUPT ioctl from
user-space. In future, the in-kernel IRQCHIP emulation will use
kvm_riscv_vcpu_set_interrupt() and kvm_riscv_vcpu_unset_interrupt()
functions to set/unset VCPU interrupts.

Important VCPU requests implemented by this patch are:
KVM_REQ_SLEEP - set whenever VCPU itself goes to sleep state
KVM_REQ_VCPU_RESET - set whenever VCPU reset is requested

The WFI trap-n-emulate (added later) will use KVM_REQ_SLEEP request
and kvm_riscv_vcpu_has_interrupt() function.

The KVM_REQ_VCPU_RESET request will be used by SBI emulation (added
later) to power-up a VCPU in power-off state. The user-space can use
the GET_MPSTATE/SET_MPSTATE ioctls to get/set power state of a VCPU.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>

RISC-V: Add initial skeletal KVM support

This patch adds initial skeletal KVM RISC-V support which has:
1. A simple implementation of arch specific VM functions
except kvm_vm_ioctl_get_dirty_log() which will implemeted
in-future as part of stage2 page loging.
2. Stubs of required arch specific VCPU functions except
kvm_arch_vcpu_ioctl_run() which is semi-complete and
extended by subsequent patches.
3. Stubs for required arch specific stage2 MMU functions.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>