#
81d7cac4 |
|
24-Jul-2023 |
Rob Herring <robh@kernel.org> |
powerpc: Explicitly include correct DT includes The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> [mpe: Fixup maple/setup.c which needs platform_device] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230724210247.778034-1-robh@kernel.org
|
#
a99cc668 |
|
07-Feb-2023 |
Arnd Bergmann <arnd@arndb.de> |
gpiolib: split of_mm_gpio_chip out of linux/of_gpio.h This is a rarely used feature that has nothing to do with the client-side of_gpio.h. Split it out with a separate header file and Kconfig option so it can be removed on its own timeline aside from removing the of_gpio consumer interfaces. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
#
136a9a0f |
|
18-May-2020 |
Christophe Leroy <christophe.leroy@csgroup.eu> |
powerpc/8xx: Don't set IMMR map anymore at boot Only early debug requires IMMR to be mapped early. No need to set it up and pin it in assembly. Map it through page tables at udbg init when necessary. If CONFIG_PIN_TLB_IMMR is selected, pin it once we don't need the 32 Mb pinned RAM anymore. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/13c1e8539fdf363d3146f4884e5c3c76c6c308b5.1589866984.git.christophe.leroy@csgroup.eu
|
#
25763b3c |
|
28-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 206 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of version 2 of the gnu general public license as published by the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 107 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528171438.615055994@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
6bd6d867 |
|
06-Aug-2018 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/cpm1: fix compilation error with CONFIG_PPC_EARLY_DEBUG_CPM commit e8cb7a55eb8dc ("powerpc: remove superflous inclusions of asm/fixmap.h") removed inclusion of asm/fixmap.h from files not including objects from that file. However, asm/mmu-8xx.h includes call to __fix_to_virt(). The proper way would be to include asm/fixmap.h in asm/mmu-8xx.h but it creates an inclusion loop. So we have to leave asm/fixmap.h in sysdep/cpm_common.c for CONFIG_PPC_EARLY_DEBUG_CPM CC arch/powerpc/sysdev/cpm_common.o In file included from ./arch/powerpc/include/asm/mmu.h:340:0, from ./arch/powerpc/include/asm/reg_8xx.h:8, from ./arch/powerpc/include/asm/reg.h:29, from ./arch/powerpc/include/asm/processor.h:13, from ./arch/powerpc/include/asm/thread_info.h:28, from ./include/linux/thread_info.h:38, from ./arch/powerpc/include/asm/ptrace.h:159, from ./arch/powerpc/include/asm/hw_irq.h:12, from ./arch/powerpc/include/asm/irqflags.h:12, from ./include/linux/irqflags.h:16, from ./include/asm-generic/cmpxchg-local.h:6, from ./arch/powerpc/include/asm/cmpxchg.h:537, from ./arch/powerpc/include/asm/atomic.h:11, from ./include/linux/atomic.h:5, from ./include/linux/mutex.h:18, from ./include/linux/kernfs.h:13, from ./include/linux/sysfs.h:16, from ./include/linux/kobject.h:20, from ./include/linux/device.h:16, from ./include/linux/node.h:18, from ./include/linux/cpu.h:17, from ./include/linux/of_device.h:5, from arch/powerpc/sysdev/cpm_common.c:21: arch/powerpc/sysdev/cpm_common.c: In function ‘udbg_init_cpm’: ./arch/powerpc/include/asm/mmu-8xx.h:218:25: error: implicit declaration of function ‘__fix_to_virt’ [-Werror=implicit-function-declaration] #define VIRT_IMMR_BASE (__fix_to_virt(FIX_IMMR_BASE)) ^ arch/powerpc/sysdev/cpm_common.c:75:7: note: in expansion of macro ‘VIRT_IMMR_BASE’ VIRT_IMMR_BASE); ^ ./arch/powerpc/include/asm/mmu-8xx.h:218:39: error: ‘FIX_IMMR_BASE’ undeclared (first use in this function) #define VIRT_IMMR_BASE (__fix_to_virt(FIX_IMMR_BASE)) ^ arch/powerpc/sysdev/cpm_common.c:75:7: note: in expansion of macro ‘VIRT_IMMR_BASE’ VIRT_IMMR_BASE); ^ ./arch/powerpc/include/asm/mmu-8xx.h:218:39: note: each undeclared identifier is reported only once for each function it appears in #define VIRT_IMMR_BASE (__fix_to_virt(FIX_IMMR_BASE)) ^ arch/powerpc/sysdev/cpm_common.c:75:7: note: in expansion of macro ‘VIRT_IMMR_BASE’ VIRT_IMMR_BASE); ^ cc1: all warnings being treated as errors make[1]: *** [arch/powerpc/sysdev/cpm_common.o] Error 1 Fixes: e8cb7a55eb8dc ("powerpc: remove superflous inclusions of asm/fixmap.h") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
2a39926c |
|
06-Aug-2018 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/cpm1: fix compilation error with CONFIG_PPC_EARLY_DEBUG_CPM commit e8cb7a55eb8dc ("powerpc: remove superflous inclusions of asm/fixmap.h") removed inclusion of asm/fixmap.h from files not including objects from that file. However, asm/mmu-8xx.h includes call to __fix_to_virt(). The proper way would be to include asm/fixmap.h in asm/mmu-8xx.h but it creates an inclusion loop. So we have to leave asm/fixmap.h in sysdep/cpm_common.c for CONFIG_PPC_EARLY_DEBUG_CPM CC arch/powerpc/sysdev/cpm_common.o In file included from ./arch/powerpc/include/asm/mmu.h:340:0, from ./arch/powerpc/include/asm/reg_8xx.h:8, from ./arch/powerpc/include/asm/reg.h:29, from ./arch/powerpc/include/asm/processor.h:13, from ./arch/powerpc/include/asm/thread_info.h:28, from ./include/linux/thread_info.h:38, from ./arch/powerpc/include/asm/ptrace.h:159, from ./arch/powerpc/include/asm/hw_irq.h:12, from ./arch/powerpc/include/asm/irqflags.h:12, from ./include/linux/irqflags.h:16, from ./include/asm-generic/cmpxchg-local.h:6, from ./arch/powerpc/include/asm/cmpxchg.h:537, from ./arch/powerpc/include/asm/atomic.h:11, from ./include/linux/atomic.h:5, from ./include/linux/mutex.h:18, from ./include/linux/kernfs.h:13, from ./include/linux/sysfs.h:16, from ./include/linux/kobject.h:20, from ./include/linux/device.h:16, from ./include/linux/node.h:18, from ./include/linux/cpu.h:17, from ./include/linux/of_device.h:5, from arch/powerpc/sysdev/cpm_common.c:21: arch/powerpc/sysdev/cpm_common.c: In function ‘udbg_init_cpm’: ./arch/powerpc/include/asm/mmu-8xx.h:218:25: error: implicit declaration of function ‘__fix_to_virt’ [-Werror=implicit-function-declaration] #define VIRT_IMMR_BASE (__fix_to_virt(FIX_IMMR_BASE)) ^ arch/powerpc/sysdev/cpm_common.c:75:7: note: in expansion of macro ‘VIRT_IMMR_BASE’ VIRT_IMMR_BASE); ^ ./arch/powerpc/include/asm/mmu-8xx.h:218:39: error: ‘FIX_IMMR_BASE’ undeclared (first use in this function) #define VIRT_IMMR_BASE (__fix_to_virt(FIX_IMMR_BASE)) ^ arch/powerpc/sysdev/cpm_common.c:75:7: note: in expansion of macro ‘VIRT_IMMR_BASE’ VIRT_IMMR_BASE); ^ ./arch/powerpc/include/asm/mmu-8xx.h:218:39: note: each undeclared identifier is reported only once for each function it appears in #define VIRT_IMMR_BASE (__fix_to_virt(FIX_IMMR_BASE)) ^ arch/powerpc/sysdev/cpm_common.c:75:7: note: in expansion of macro ‘VIRT_IMMR_BASE’ VIRT_IMMR_BASE); ^ cc1: all warnings being treated as errors make[1]: *** [arch/powerpc/sysdev/cpm_common.o] Error 1 Fixes: e8cb7a55eb8dc ("powerpc: remove superflous inclusions of asm/fixmap.h") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <oss@buserror.net>
|
#
e8cb7a55 |
|
05-Jul-2018 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc: remove superflous inclusions of asm/fixmap.h Files not using fixmap consts or functions don't need asm/fixmap.h Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
c095ff93 |
|
12-Dec-2017 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/sysdev: change CPM GPIO to platform_device Since commit 9427ecbed46cc ("gpio: Rework of_gpiochip_set_names() to use device property accessors"), gpio chips have to have a parent, otherwise devprop_gpiochip_set_names() prematurely exists with message "GPIO chip parent is NULL" and doesn't proceed 'gpio-line-names' DT property. This patch wraps the CPM GPIO into a platform driver to allow assignment of the parent device. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <oss@buserror.net>
|
#
4d486e00 |
|
16-Aug-2016 |
Christophe Leroy <christophe.leroy@c-s.fr> |
soc/fsl/qe: fix Oops on CPM1 (and likely CPM2) Commit 0e6e01ff694ee ("CPM/QE: use genalloc to manage CPM/QE muram") has changed the way muram is managed. genalloc uses kmalloc(), hence requires the SLAB to be up and running. On powerpc 8xx, cpm_reset() is called early during startup. cpm_reset() then calls cpm_muram_init() before SLAB is available, hence the following Oops. cpm_reset() cannot be called during initcalls because the CPM is needed for console. This patch removes the call to cpm_muram_init() from cpm_reset(). cpm_muram_init() will be called from a new function called cpm_init() which is declared as subsys_initcall, unless cpm_muram_alloc() is called earlier for the serial console in which case cpm_muram_init() will be called from there. The reason for calling it from two places is that some drivers (e.g. i2c-cpm) need some of the initialisations done by cpm_muram_init() but don't call cpm_muram_alloc(). The console driver calls cpm_muram_alloc() but some platforms might not use the CPM serial ports for console. [ 0.000000] Unable to handle kernel paging request for data at address 0x00000008 [ 0.000000] Faulting instruction address: 0xc01acce0 [ 0.000000] Oops: Kernel access of bad area, sig: 11 [#1] [ 0.000000] PREEMPT CMPC885 [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.14-g0886ed8 #5 [ 0.000000] task: c05183e0 ti: c0536000 task.ti: c0536000 [ 0.000000] NIP: c01acce0 LR: c0011068 CTR: 00000000 [ 0.000000] REGS: c0537e50 TRAP: 0300 Not tainted (4.4.14-s3k-dev-g0886ed8-svn) [ 0.000000] MSR: 00001032 <ME,IR,DR,RI> CR: 28044428 XER: 00000000 [ 0.000000] DAR: 00000008 DSISR: c0000000 GPR00: c0011068 c0537f00 c05183e0 00000000 00009000 ffffffff 00000bc0 ffffffff GPR08: ff003000 ff00b000 ff003bbf 00000000 22044422 100d43a8 00000000 07ff94e8 GPR16: 00000000 07bb5d70 00000000 07ff81f4 07ff81f4 07ff81f4 00000000 00000000 GPR24: 07ffb3a0 07fe7628 c0550000 c7ffa190 c0540000 ff003bbf 00000000 00000001 [ 0.000000] NIP [c01acce0] gen_pool_add_virt+0x14/0xdc [ 0.000000] LR [c0011068] cpm_muram_init+0xd4/0x18c [ 0.000000] Call Trace: [ 0.000000] [c0537f00] [00000200] 0x200 (unreliable) [ 0.000000] [c0537f20] [c0011068] cpm_muram_init+0xd4/0x18c [ 0.000000] [c0537f70] [c0494684] cpm_reset+0xb4/0xc8 [ 0.000000] [c0537f90] [c0494c64] cmpc885_setup_arch+0x10/0x30 [ 0.000000] [c0537fa0] [c0493cd4] setup_arch+0x130/0x168 [ 0.000000] [c0537fb0] [c04906bc] start_kernel+0x88/0x380 [ 0.000000] [c0537ff0] [c0002224] start_here+0x38/0x98 [ 0.000000] Instruction dump: [ 0.000000] 91430010 91430014 80010014 83e1000c 7c0803a6 38210010 4e800020 7c0802a6 [ 0.000000] 9421ffe0 bf61000c 90010024 7c7e1b78 <80630008> 7c9c2378 7cc31c30 3863001f [ 0.000000] ---[ end trace dc8fa200cb88537f ]--- fixes: 0e6e01ff694ee ("CPM/QE: use genalloc to manage CPM/QE muram") Cc: stable@vger.linux.org Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> [scottwood: Removed some string changes unrelated to bugfix] Signed-off-by: Scott Wood <oss@buserror.net>
|
#
41017a75 |
|
11-Aug-2016 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc: sysdev: cpm: fix gpio save_regs functions of_mm_gpiochip_add_data() calls mm_gc->save_regs() before setting the data. Therefore ->save_regs() cannot use gpiochip_get_data() [ 0.275940] Unable to handle kernel paging request for data at address 0x00000130 [ 0.283120] Faulting instruction address: 0xc01b44cc [ 0.288175] Oops: Kernel access of bad area, sig: 11 [#1] [ 0.293343] PREEMPT CMPC885 [ 0.296141] CPU: 0 PID: 1 Comm: swapper Not tainted 4.7.0-g65124df-dirty #68 [ 0.304131] task: c6074000 ti: c6080000 task.ti: c6080000 [ 0.309459] NIP: c01b44cc LR: c0011720 CTR: c0011708 [ 0.314372] REGS: c6081d90 TRAP: 0300 Not tainted (4.7.0-g65124df-dirty) [ 0.322267] MSR: 00009032 <EE,ME,IR,DR,RI> CR: 24000028 XER: 20000000 [ 0.328813] DAR: 00000130 DSISR: c0000000 GPR00: c01b6d0c c6081e40 c6074000 c6017000 c9028000 c601d028 c6081dd8 00000000 GPR08: c601d028 00000000 ffffffff 00000001 24000044 00000000 c0002790 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 c05643b0 00000083 GPR24: c04a1a6c c0560000 c04a8308 c04c6480 c0012498 c6017000 c7ffcc78 c6017000 [ 0.360806] NIP [c01b44cc] gpiochip_get_data+0x4/0xc [ 0.365684] LR [c0011720] cpm1_gpio16_save_regs+0x18/0x44 [ 0.370972] Call Trace: [ 0.373451] [c6081e50] [c01b6d0c] of_mm_gpiochip_add_data+0x70/0xdc [ 0.379624] [c6081e70] [c00124c0] cpm_init_par_io+0x28/0x118 [ 0.385238] [c6081e80] [c04a8ac0] do_one_initcall+0xb0/0x17c [ 0.390819] [c6081ef0] [c04a8cbc] kernel_init_freeable+0x130/0x1dc [ 0.396924] [c6081f30] [c00027a4] kernel_init+0x14/0x110 [ 0.402177] [c6081f40] [c000b424] ret_from_kernel_thread+0x5c/0x64 [ 0.408233] Instruction dump: [ 0.411168] 4182fafc 3f80c040 48234c6d 3bc0fff0 3b9c5ed0 4bfffaf4 81290020 712a0004 [ 0.418825] 4182fb34 48234c51 4bfffb2c 81230004 <80690130> 4e800020 7c0802a6 9421ffe0 [ 0.426763] ---[ end trace fe4113ee21d72ffa ]--- fixes: e65078f1f3490 ("powerpc: sysdev: cpm1: use gpiochip data pointer") fixes: a14a2d484b386 ("powerpc: cpm_common: use gpiochip data pointer") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
#
f86ef74e |
|
17-May-2016 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/8xx: Fix vaddr for IMMR early remap Memory: 124428K/131072K available (3748K kernel code, 188K rwdata, 648K rodata, 508K init, 290K bss, 6644K reserved) Kernel virtual memory layout: * 0xfffdf000..0xfffff000 : fixmap * 0xfde00000..0xfe000000 : consistent mem * 0xfddf6000..0xfde00000 : early ioremap * 0xc9000000..0xfddf6000 : vmalloc & ioremap SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Today, IMMR is mapped 1:1 at startup Mapping IMMR 1:1 is just wrong because it may overlap with another area. On most mpc8xx boards it is OK as IMMR is set to 0xff000000 but for instance on EP88xC board, IMMR is at 0xfa200000 which overlaps with VM ioremap area This patch fixes the virtual address for remapping IMMR with the fixmap regardless of the value of IMMR. The size of IMMR area is 256kbytes (CPM at offset 0, security engine at offset 128k) so a 512k page is enough Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <oss@buserror.net>
|
#
a14a2d48 |
|
08-Dec-2015 |
Linus Walleij <linus.walleij@linaro.org> |
powerpc: cpm_common: use gpiochip data pointer This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Anatolij Gustschin <agust@denx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
#
7aa1aa6e |
|
29-Nov-2015 |
Zhao Qiang <qiang.zhao@freescale.com> |
QE: Move QE from arch/powerpc to drivers/soc ls1 has qe and ls1 has arm cpu. move qe from arch/powerpc to drivers/soc/fsl to adapt to powerpc and arm Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
|
#
1291e49e |
|
29-Nov-2015 |
Zhao Qiang <qiang.zhao@freescale.com> |
QE/CPM: move muram management functions to qe_common QE and CPM have the same muram, they use the same management functions. Now QE support both ARM and PowerPC, it is necessary to move QE to "driver/soc", so move the muram management functions from cpm_common to qe_common for preparing to move QE code to "driver/soc" Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
|
#
0e6e01ff |
|
29-Nov-2015 |
Zhao Qiang <qiang.zhao@freescale.com> |
CPM/QE: use genalloc to manage CPM/QE muram Use genalloc to manage CPM/QE muram instead of rheap. Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
|
#
9d28cc81 |
|
21-Aug-2015 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc: handle error case in cpm_muram_alloc() rh_alloc() returns (unsigned long)-ERRxx on error, which may result in overwriting memory outside the MURAM AREA. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
|
#
934628c7 |
|
18-May-2015 |
LEROY Christophe <christophe.leroy@c-s.fr> |
powerpc: use memset_io() to clear CPM Muram CPM muram is not cached, so use memset_io() instead of memset() Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
|
#
26a2056e |
|
26-Sep-2013 |
Rob Herring <rob.herring@calxeda.com> |
powerpc: add explicit OF includes When removing prom.h include by of.h, several OF headers will no longer be implicitly included. Add explicit includes of of_*.h as needed. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@linaro.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Anatolij Gustschin <agust@denx.de> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Olof Johansson <olof@lixom.net> Cc: linuxppc-dev@lists.ozlabs.org
|
#
ae3a197e |
|
28-Mar-2012 |
David Howells <dhowells@redhat.com> |
Disintegrate asm/system.h for PowerPC Disintegrate asm/system.h for PowerPC. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> cc: linuxppc-dev@lists.ozlabs.org
|
#
66b15db6 |
|
27-May-2011 |
Paul Gortmaker <paul.gortmaker@windriver.com> |
powerpc: add export.h to files making use of EXPORT_SYMBOL With module.h being implicitly everywhere via device.h, the absence of explicitly including something for EXPORT_SYMBOL went unnoticed. Since we are heading to fix things up and clean module.h from the device.h file, we need to explicitly include these files now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
#
1661e5bd |
|
26-Mar-2010 |
Hongjun Chen <Hong-jun.Chen@freescale.com> |
powerpc/cpm: Clear muram before it is in use. We need to ensure that MURAM is in a known and cleared out state before using it as the bootloader could have utilized it from its own purposes and left it in an unknown state. If we don't clear it out we've seen issues with UCC ethernet: * Multi ethernet interfaces can't work simultanously. * Multi up/down Ethernet interfaces will halt these ports. * UCC1 RGMII can't work when kernel boots from some hosts. Signed-off-by: Kai.Jiang <Kai.Jiang@freescale.com> Signed-off-by: Hongjun Chen <Hong-jun.Chen@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
#
28f65c11 |
|
09-Jun-2011 |
Joe Perches <joe@perches.com> |
treewide: Convert uses of struct resource to resource_size(ptr) Several fixes as well where the +1 was missing. Done via coccinelle scripts like: @@ struct resource *ptr; @@ - ptr->end - ptr->start + 1 + resource_size(ptr) and some grep and typing. Mostly uncompiled, no cross-compilers. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
#
391c970c |
|
08-Jun-2010 |
Anton Vorontsov <avorontsov@ru.mvista.com> |
of/gpio: add default of_xlate function if device has a node pointer Implement generic OF gpio hooks and thus make device-enabled GPIO chips (i.e. the ones that have gpio_chip->dev specified) automatically attach to the OpenFirmware subsystem. Which means that now we can handle I2C and SPI GPIO chips almost* transparently. * "Almost" because some chips still require platform data, and for these chips OF-glue is still needed, though with this change the glue will be much smaller. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Bill Gatliff <bgat@billgatliff.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jean Delvare <khali@linux-fr.org> Cc: Andrew Morton <akpm@linux-foundation.org> CC: linux-kernel@vger.kernel.org CC: devicetree-discuss@lists.ozlabs.org
|
#
a19e3da5 |
|
08-Jun-2010 |
Anton Vorontsov <avorontsov@ru.mvista.com> |
of/gpio: Kill of_gpio_chip and add members directly to gpio_chip The OF gpio infrastructure is great for describing GPIO connections within the device tree. However, using a GPIO binding still requires changes to the gpio controller just to add an of_gpio structure. In most cases, the gpio controller doesn't actually need any special support and the simple OF gpio mapping function is more than sufficient. Additional, the current scheme of using of_gpio_chip requires a convoluted scheme to maintain 1:1 mappings between of_gpio_chip and gpio_chip instances. If the struct of_gpio_chip data members were moved into struct gpio_chip, then it would simplify the processing of OF gpio bindings, and it would make it trivial to use device tree OF connections on existing gpiolib controller drivers. This patch eliminates the of_gpio_chip structure and moves the relevant fields into struct gpio_chip (conditional on CONFIG_OF_GPIO). This move simplifies the existing code and prepares for adding automatic device tree support to existing drivers. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Bill Gatliff <bgat@billgatliff.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jean Delvare <khali@linux-fr.org>
|
#
5a0e3ad6 |
|
24-Mar-2010 |
Tejun Heo <tj@kernel.org> |
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
|
#
0c7b87b0 |
|
15-Sep-2009 |
Anton Vorontsov <avorontsov@ru.mvista.com> |
powerpc/qe: Make qe_reset() code path safe for repeated invocation For MPC8569 CPUs we'll need to reset QE after each suspend, so make qe_reset() code path suitable for repeated invocation, that is: - Don't initialize rheap structures if already initialized; - Don't allocate muram for SDMA if already allocated, just reinitialize registers with previously allocated muram offset; - Remove __init attributes from qe_reset() and cpm_muram_init(); Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
#
8d1cf34e |
|
19-Mar-2009 |
Benjamin Herrenschmidt <benh@kernel.crashing.org> |
powerpc/mm: Tweak PTE bit combination definitions This patch tweaks the way some PTE bit combinations are defined, in such a way that the 32 and 64-bit variant become almost identical and that will make it easier to bring in a new common pte-* file for the new variant of the Book3-E support. The combination of bits defining access to kernel pages are now clearly separated from the combination used by userspace and the core VM. The resulting generated code should remain identical unless I made a mistake. Note: While at it, I removed a non-sensical statement related to CONFIG_KGDB in ppc_mmu_32.c which could cause kernel mappings to be user accessible when that option is enabled. Probably something that bitrot. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
#
639d6445 |
|
19-Aug-2008 |
Laurent Pinchart <laurentp@cse-semaphore.com> |
cpm2: Fix race condition in CPM2 GPIO library. The CPM2 GPIO library code uses the non thread-safe clrbits32/setbits32 macros. This patch protects them with a spinlock. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
#
e193325e |
|
28-Jul-2008 |
Laurent Pinchart <laurentp@cse-semaphore.com> |
cpm2: Implement GPIO LIB API on CPM2 Freescale SoC. This patch implement GPIO LIB support for the CPM2 GPIOs. The code can also be used for CPM1 GPIO port E, as both cores are compatible at the register level. Based on earlier work by Laurent Pinchart. Signed-off-by: Jochen Friedrich <jochen@scram.de> Cc: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
#
5e82eb33 |
|
27-Jun-2008 |
Nye Liu <nyet@mrv.com> |
powerpc/CPM: Minor cosmetic changes to udbg_putc udbg_putc is a *function pointer* that is initialized during udbg_init_cpm. It might not be initialized properly when called from udbg_putc_cpm(), so (recursively) call udbg_putc_cpm() directly. Signed-off-by: Nye Liu <nyet@mrv.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
#
5093bb96 |
|
23-May-2008 |
Anton Vorontsov <avorontsov@ru.mvista.com> |
powerpc/QE: switch to the cpm_muram implementation This is very trivial patch. We're transitioning to the cpm_muram_* calls. That's it. Less trivial changes: - BD_SC_* defines were defined in the cpm.h and qe.h, so to avoid redefines we remove BD_SC from the qe.h and use cpm.h along with cpm_muram_* prototypes; - qe_muram_dump was unused and thus removed; - added some code to the cpm_common.c to support legacy QE bindings (data-only node name). - For convenience, define qe_* calls to cpm_*. So drivers need not to be changed. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
#
3dd82a1e |
|
10-Apr-2008 |
Scott Wood <scottwood@freescale.com> |
[POWERPC] CPM: Always use new binding. The kconfig entry can go away once arch/ppc and references to the config in drivers are removed. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
#
4c011b1fb |
|
12-Oct-2007 |
Scott Wood <scottwood@freescale.com> |
[POWERPC] cpm: Fix a couple minor issues in cpm_common.c. A debugging printk is removed, and a comment is fixed to match the code. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
#
15f8c604 |
|
28-Sep-2007 |
Scott Wood <scottwood@freescale.com> |
[POWERPC] cpm: Describe multi-user ram in its own device node. The way the current CPM binding describes available multi-user (a.k.a. dual-ported) RAM doesn't work well when there are multiple free regions, and it doesn't work at all if the region doesn't begin at the start of the muram area (as the hardware needs to be programmed with offsets into this area). The latter situation can happen with SMC UARTs on CPM2, as its parameter RAM is relocatable, u-boot puts it at zero, and the kernel doesn't support moving it. It is now described with a muram node, similar to QE. The current CPM binding is sufficiently recent (i.e. never appeared in an official release) that compatibility with existing device trees is not an issue. The code supporting the new binding is shared between cpm1 and cpm2, rather than remain separated. QE should be able to use this code as well, once minor fixes are made to its device trees. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
#
c374e00e |
|
16-Jul-2007 |
Scott Wood <scottwood@freescale.com> |
[POWERPC] Add early debug console for CPM serial ports. This code assumes that the ports have been previously set up, with buffers in DPRAM. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|