PCI: Introduce pci_dev_for_each_resource()

Instead of open-coding it everywhere introduce a tiny helper that can be
used to iterate over each resource of a PCI device, and convert the most
obvious users into it.

While at it drop doubled empty line before pdev_sort_resources().

No functional changes intended.

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230330162434.35055-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>

powerpc/rtas: arch-wide function token lookup conversions

With the tokens for all implemented RTAS functions now available via
rtas_function_token(), which is optimal and safe for arbitrary
contexts, there is no need to use rtas_token() or cache its result.

Most conversions are trivial, but a few are worth describing in more
detail:

* Error injection token comparisons for lockdown purposes are
consolidated into a simple predicate: token_is_restricted_errinjct().

* A couple of special cases in block_rtas_call() do not use
rtas_token() but perform string comparisons against names in the
function table. These are converted to compare against token values
instead, which is logically equivalent but less expensive.

* The lookup for the ibm,os-term token can be deferred until needed,
instead of caching it at boot to avoid device tree traversal during
panic.

* Since rtas_function_token() accesses a read-only data structure
without taking any locks, xmon's lookup of set-indicator can be
performed as needed instead of cached at startup.

Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-20-26929c8cce78@linux.ibm.com

powerpc: Remove asm/prom.h from all files that don't need it

Several files include asm/prom.h for no reason.

Clean it up.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Drop change to prom_parse.c as reported by lkp@intel.com]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7c9b8fda63dcf63e1b28f43e7ebdb95182cbc286.1646767214.git.christophe.leroy@csgroup.eu

powerpc/powernv: remove the nvlink support

This code was only used by the vfio-nvlink2 code, which itself had no
proper use. Drop this huge chunk of code build into every powernv
or generic build.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210326061311.1497642-3-hch@lst.de

powerpc/pcidn: Make IOV setup routines static

These are only used locally. It fixes these W=1 compile errors :

../arch/powerpc/platforms/pseries/pci.c:58:5: error: no previous prototype for ‘pseries_send_map_pe’ [-Werror=missing-prototypes]
58 | int pseries_send_map_pe(struct pci_dev *pdev,
| ^~~~~~~~~~~~~~~~~~~
../arch/powerpc/platforms/pseries/pci.c:91:6: error: no previous prototype for ‘pseries_set_pe_num’ [-Werror=missing-prototypes]
91 | void pseries_set_pe_num(struct pci_dev *pdev, u16 vf_index, __be16 pe_num)
| ^~~~~~~~~~~~~~~~~~
../arch/powerpc/platforms/pseries/pci.c:105:5: error: no previous prototype for ‘pseries_associate_pes’ [-Werror=missing-prototypes]
105 | int pseries_associate_pes(struct pci_dev *pdev, u16 num_vfs)
| ^~~~~~~~~~~~~~~~~~~~~
../arch/powerpc/platforms/pseries/pci.c:149:5: error: no previous prototype for ‘pseries_pci_sriov_enable’ [-Werror=missing-prototypes]
149 | int pseries_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
| ^~~~~~~~~~~~~~~~~~~~~~~~
../arch/powerpc/platforms/pseries/pci.c:192:5: error: no previous prototype for ‘pseries_pcibios_sriov_enable’ [-Werror=missing-prototypes]
192 | int pseries_pcibios_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
../arch/powerpc/platforms/pseries/pci.c:199:5: error: no previous prototype for ‘pseries_pcibios_sriov_disable’ [-Werror=missing-prototypes]
199 | int pseries_pcibios_sriov_disable(struct pci_dev *pdev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-23-clg@kaod.org

powerpc/pseries: Define PCI bus speed for Gen4 and Gen5

Update bus speed definition for PCI Gen4 and 5.

Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201130152949.26467-1-fbarrat@linux.ibm.com

powerpc/pcidn: Make VF pci_dn management CONFIG_PCI_IOV specific

The powerpc PCI code requires that a pci_dn structure exists for all
devices in the system. This is fine for real devices since at boot a pci_dn
is created for each PCI device in the DT and it's fine for hotplugged devices
since the hotplug slot driver will manage the pci_dn's devices in hotplug
slots. For SR-IOV, we need the platform / pcibios to manage the pci_dn for
virtual functions since firmware is unaware of VFs, and they aren't
"hot plugged" in the traditional sense.

Management of the pci_dn is handled by the, poorly named, functions:
add_pci_dev_data() and remove_pci_dev_data(). The entire body of these
functions is #ifdef`ed around CONFIG_PCI_IOV and they cannot be used
in any other context, so make them only available when CONFIG_PCI_IOV
is selected, and rename them to reflect their actual usage rather than
having them masquerade as generic code.

Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190821062655.19735-2-oohall@gmail.com

powerpc/eeh: Refactor around eeh_probe_devices()

Now that EEH support for all devices (on PowerNV and pSeries) is
provided by the pcibios bus add device hooks, eeh_probe_devices() and
eeh_addr_cache_build() are redundant and can be removed.

Move the EEH enabled message into it's own function so that it can be
called from multiple places.

Note that previously on pSeries, useless EEH sysfs files were created
for some devices that did not have EEH support and this change
prevents them from being created.

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/33b0a6339d5ac88693de092d6fba984f2a5add66.1565930772.git.sbobroff@linux.ibm.com

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1334 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/pseries: Fix build break due to pnv_npu2_init()

Commit 3be2df00e299 ("powerpc/pseries/npu: Enable platform support")
added a call to pnv_npu2_init() in pseries code. This causes a build
break if we build with CONFIG_PPC_PSERIES && !CONFIG_PPC_POWERNV:

powerpc64le-pc-linux-gnu-ld: arch/powerpc/platforms/pseries/pci.o: in function `pSeries_final_fixup':
pci.c:(.init.text+0x1b0): undefined reference to `pnv_npu2_init'

This commit therefore wraps that line in an ifdef, so that pseries
builds without powernv.

Fixes: 3be2df00e299 ("powerpc/pseries/npu: Enable platform support")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[mpe: Frob change log a bit to blame a different commit]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/pseries/npu: Enable platform support

We already changed NPU API for GPUs to not to call OPAL and the remaining
bit is initializing NPU structures.

This searches for POWER9 NVLinks attached to any device on a PHB and
initializes an NPU structure if any found.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/eeh: Cleanup EEH_POSTPONED_PROBE

Currently a flag, EEH_POSTPONED_PROBE, is used to prevent an incorrect
message "EEH: No capable adapters found" from being displayed during
the boot of powernv systems.

It is necessary because, on powernv, the call to eeh_probe_devices()
made from eeh_init() is too early and EEH can't yet be enabled. A
second call is made later from eeh_pnv_post_init(), which succeeds.

(On pseries, the first call succeeds because PCI devices are set up
early enough and no second call is made.)

This can be simplified by moving the early call to eeh_probe_devices()
from eeh_init() (where it's seen by both platforms) to
pSeries_final_fixup(), so that each platform only calls
eeh_probe_devices() once, at a point where it can succeed.
This is slightly later in the boot sequence, but but still early
enough and it is now in the same place in the sequence for both
platforms (the pcibios_fixup hook).

The display of the message can be cleaned up as well, by moving it
into eeh_probe_devices().

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/pseries/pci: Associate PEs to VFs in configure SR-IOV

After initial validation of SR-IOV resources, firmware will associate
PEs to the dynamic VFs created within this call. This patch adds the
association of PEs to the PF array of PE numbers indexed by VF.

Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Signed-off-by: Juan J. Alvarez <jjalvare@linux.vnet.ibm.com>
Acked-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

PCI/IOV: Add pci_vf_drivers_autoprobe() interface

Add a pci_vf_drivers_autoprobe() interface. Setting autoprobe to false
on the PF prevents drivers from binding to VFs when they are enabled.

Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Signed-off-by: Juan J. Alvarez <jjalvare@linux.vnet.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/pseries: Add pseries SR-IOV Machine dependent calls

Add calls for pseries platform to configure/deconfigure SR-IOV.

Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Signed-off-by: Juan J. Alvarez <jjalvare@us.ibm.com>
Acked-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/pseries: use pci_host_bridge.release_fn() to kfree(phb)

This patch leverages 'struct pci_host_bridge' from the PCI subsystem
in order to free the pci_controller only after the last reference to
its devices is dropped (avoiding an oops in pcibios_release_device()
if the last reference is dropped after pcibios_free_controller()).

The patch relies on pci_host_bridge.release_fn() (and .release_data),
which is called automatically by the PCI subsystem when the root bus
is released (i.e., the last reference is dropped). Those fields are
set via pci_set_host_bridge_release() (e.g. in the platform-specific
implementation of pcibios_root_bridge_prepare()).

It introduces the 'pcibios_free_controller_deferred()' .release_fn()
and it expects .release_data to hold a pointer to the pci_controller.

The function implictly calls 'pcibios_free_controller()', so an user
must *NOT* explicitly call it if using the new _deferred() callback.

The functionality is enabled for pseries (although it isn't platform
specific, and may be used by cxl).

Details on not-so-elegant design choices:

- Use 'pci_host_bridge.release_data' field as pointer to associated
'struct pci_controller' so *not* to 'pci_bus_to_host(bridge->bus)'
in pcibios_free_controller_deferred().

That's because pci_remove_root_bus() sets 'host_bridge->bus = NULL'
(so, if the last reference is released after pci_remove_root_bus()
runs, which eventually reaches pcibios_free_controller_deferred(),
that would hit a null pointer dereference).

The cxl/vphb.c code calls pci_remove_root_bus(), and the cxl folks
are interested in this fix.

Test-case #1 (hold references)

# ls -ld /sys/block/sd* | grep -m1 0021:01:00.0
<...> /sys/block/sdaa -> ../devices/pci0021:01/0021:01:00.0/<...>

# ls -ld /sys/block/sd* | grep -m1 0021:01:00.1
<...> /sys/block/sdab -> ../devices/pci0021:01/0021:01:00.1/<...>

# cat >/dev/sdaa & pid1=$!
# cat >/dev/sdab & pid2=$!

# drmgr -w 5 -d 1 -c phb -s 'PHB 33' -r
Validating PHB DLPAR capability...yes.
[ 594.306719] pci_hp_remove_devices: PCI: Removing devices on bus 0021:01
[ 594.306738] pci_hp_remove_devices: Removing 0021:01:00.0...
...
[ 598.236381] pci_hp_remove_devices: Removing 0021:01:00.1...
...
[ 611.972077] pci_bus 0021:01: busn_res: [bus 01-ff] is released
[ 611.972140] rpadlpar_io: slot PHB 33 removed

# kill -9 $pid1
# kill -9 $pid2
[ 632.918088] pcibios_free_controller_deferred: domain 33, dynamic 1

Test-case #2 (don't hold references)

# drmgr -w 5 -d 1 -c phb -s 'PHB 33' -r
Validating PHB DLPAR capability...yes.
[ 916.357363] pci_hp_remove_devices: PCI: Removing devices on bus 0021:01
[ 916.357386] pci_hp_remove_devices: Removing 0021:01:00.0...
...
[ 920.566527] pci_hp_remove_devices: Removing 0021:01:00.1...
...
[ 933.955873] pci_bus 0021:01: busn_res: [bus 01-ff] is released
[ 933.955977] pcibios_free_controller_deferred: domain 33, dynamic 1
[ 933.955999] rpadlpar_io: slot PHB 33 removed

Suggested-By: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Tested-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> # cxl
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/pseries: Quieten ibm,pcie-link-speed-stats warning

The ibm,pcie-link-speed-stats isn't mandatory, so we shouldn't print
a high priority error message when missing. One example where we see
this is QEMU.

Reduce it to pr_debug.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc: Ensure global functions include their prototype

Fix a number of places where global functions were not including
their prototype. This ensures the prototype and the function match.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/pseries: Add Gen3 definitions for PCIE link speed

Rev3 of the PCI Express Base Specification defines a Supported Link
Speeds Vector where the bit definitions within this field are:

Bit 0 - 2.5 GT/s
Bit 1 - 5.0 GT/s
Bit 2 - 8.0 GT/s

This vector definition is used by the platform firmware to export the
maximum and current link speeds of the PCI bus via the
"ibm,pcie-link-speed-stats" device-tree property.

This patch updates pseries_root_bridge_prepare() to detect Gen3
speed buses (defined by 0x04).

Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/pseries: Fix regression on PCI link speed

Commit 5091f0c (powerpc/pseries: Fix PCIE link speed endian issue)
introduced a regression on the PCI link speed detection using the
device-tree property. The ibm,pcie-link-speed-stats property is composed
of two 32-bit integers, the first one being the maxinum link speed and
the second the current link speed. The changes introduced by the
aforementioned commit are considering just the first integer.

Fix this issue by changing how the property is accessed, using the
helper functions to properly access the array of values. The explicit
byte swapping is not needed anymore here, since it's done by the helper
functions.

Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/pseries: Fix PCIE link speed endian issue

We need to byteswap ibm,pcie-link-speed-stats.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/pseries: Perform proper max_bus_speed detection

On pseries machines the detection for max_bus_speed should be done
through an OpenFirmware property. This patch adds a function to perform
this detection and a hook to perform dynamic adding of the function only
for pseries. This is done by overwriting the weak
pcibios_root_bridge_prepare function which is called by
pci_create_root_bus().

From: Lucas Kannebley Tavares <lucaskt@linux.vnet.ibm.com>
Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/pseries/pci: Use NULL instead of 0 for pointers

The third argument for of_get_property() is a pointer, hence pass
NULL instead of 0.

Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/eeh: Cleanup on EEH PCI address cache

The patch does cleanup on EEH PCI address cache based on the fact
EEH core is the only user of the component.

* Cleanup on function names so that they all have prefix
"eeh" and looks more short.
* Function printk() has been replaced with pr_debug() or
pr_warning() accordingly.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

[POWERPC] Rename get_property to of_get_property: arch/powerpc

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Fix link errors when EEH is disabled

Fix link errors with CONFIG_EEH=n:

arch/powerpc/platforms/built-in.o: In function `.pcibios_fixup_new_pci_devices':
(.text+0x41c8): undefined reference to `.eeh_add_device_tree_late'
arch/powerpc/platforms/built-in.o: In function `.init_phb_dynamic':
(.text+0x4280): undefined reference to `.eeh_add_device_tree_early'
arch/powerpc/platforms/built-in.o: In function `.pcibios_remove_pci_devices':
(.text+0x42fc): undefined reference to `.eeh_remove_bus_device'
arch/powerpc/platforms/built-in.o: In function `.pcibios_add_pci_devices':
(.text+0x43c0): undefined reference to `.eeh_add_device_tree_early'
arch/powerpc/platforms/built-in.o: In function `.pSeries_final_fixup':
(.init.text+0xb4): undefined reference to `.pci_addr_cache_build'
make[1]: *** [.tmp_vmlinux1] Error 1

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Mark winbond IDE PCI resources with start 0 as unassigned

libata calls pci_request_regions to claim PCI BAR 0 - 5
pci_request_regions fails if one of the regions cant be claimed.
bar 5 has start == 0, __request_resource will fail.

Tested on a p630 in SMP mode with pata_sl82c105

00:03.1 IDE interface: Symphony Labs SL82c105 (rev 05) (prog-if 8f [Master SecP SecO PriP PriO])
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 86
Region 0: I/O ports at 3fd3000f000 [size=8]
Region 1: I/O ports at 3fd3000f010 [size=4]
Region 2: I/O ports at 3fd3000f020 [size=8]
Region 3: I/O ports at 3fd3000f030 [size=4]
Region 4: I/O ports at 3fd3000f040 [size=16]
Region 5: I/O ports at 3fd30000000 [size=16]
00: ad 10 05 01 41 01 80 02 05 8f 01 01 08 48 80 00
10: 01 f0 00 00 11 f0 00 00 21 f0 00 00 31 f0 00 00
20: 41 f0 00 00 01 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 56 01 02 28
40: b3 08 ff 00 09 09 00 00 09 09 00 00 09 09 00 00
50: 09 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

name "ide"
linux,phandle 00d5cdc0 (14011840)
assigned-addresses 81001910 00000000 0000f000 00000000 00000008 81001914
00000000 0000f010 00000000 00000004 81001918 00000000
0000f020 00000000 00000008 8100191c 00000000 0000f030
00000000 00000004 81001920 00000000 0000f040 00000000
00000010 81001924 00000000 00000000 00000000 00000010
interrupts 00000003
built-in
#size-cells 00000000
#address-cells 00000001
device_type "ide"
reg 00001900 00000000 00000000 00000000 00000000
41001910 00000000 00000000 00000000 00000008
41001914 00000000 00000000 00000000 00000004
41001918 00000000 00000000 00000000 00000008
4100191c 00000000 00000000 00000000 00000004
41001920 00000000 00000000 00000000 00000010
41001924 00000000 00000000 00000000 00000010
compatible "pci10ad,105"
"pciclass,01018f"
ibm,fw-slot-number 00000000
fast-back-to-back
devsel-speed 00000001
max-latency 00000028 (40)
min-grant 00000002
class-code 0001018f (65935)
revision-id 00000005
device-id 00000105 (261)
vendor-id 000010ad (4269)
ibm,loc-code "U0.1-P1/Q6"

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Update fixup_winbond_82c105 comment

Note all POWER3/POWER4 systems where fixup_winbond_82c105 will run.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Make pci_read_irq_line the default

This patch reworks the way IRQs are fixed up on PCI for arch powerpc.

It makes pci_read_irq_line() called by default in the PCI code for
devices that are probed, and add an optional per-device fixup in
ppc_md for platforms that really need to correct what they obtain
from pci_read_irq_line().

It also removes ppc_md.irq_bus_setup which was only used by pSeries
and should not be needed anymore.

I've also removed the pSeries s7a workaround as it can't work with
the current interrupt code anyway. I'm trying to get one of these
machines working so I can test a proper fix for that problem.

I also haven't updated the old-style fixup code from 85xx_cds.c
because it's actually buggy :) It assigns pci_dev->irq hard coded
numbers which is no good with the new IRQ mapping code. It should
at least use irq_create_mapping(NULL, hard_coded_number); and possibly
also set_irq_type() to set them as level low.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] pseries: Constify & voidify get_property()

Now that get_property() returns a void *, there's no need to cast its
return value. Also, treat the return value as const, so we can
constify get_property later.

pseries platform changes.

Built for pseries_defconfig

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: Kill _machine and hard-coded platform numbers

This removes statically assigned platform numbers and reworks the
powerpc platform probe code to use a better mechanism. With this,
board support files can simply declare a new machine type with a
macro, and implement a probe() function that uses the flattened
device-tree to detect if they apply for a given machine.

We now have a machine_is() macro that replaces the comparisons of
_machine with the various PLATFORM_* constants. This commit also
changes various drivers to use the new macro instead of looking at
_machine.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: trivial: modify comments to refer to new location of files

This patch removes all self references and fixes references to files
in the now defunct arch/ppc64 tree. I think this accomplises
everything wanted, though there might be a few references I missed.

Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] ppc64: fix PCI IO mapping

phbs_remap_io(), which maps the PCI IO space into the kernel virtual space,
is called too early on powermac, and thus doesn't work.

This fixes it by removing the call from all platforms and putting it back
into the ppc64 common code where it belongs, after the actual probing of
the bus.

That means that before that call, only the ISA IO space (if any) is mapped,
any PIO access (from quirks for example) will fail. This happens not to be
a problem for now, but we'll have to rework that code if it becomes one in
the future.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: merge code values for identifying platforms

This patch merges platform codes. systemcfg->platform is no longer used,
systemcfg use in general is deprecated as much as possible (and renamed
_systemcfg before it gets completely moved elsewhere in a future patch),
_machine is now used on ppc64 along as ppc32. Platform codes aren't gone
yet but we are getting a step closer. A bunch of asm code in head[_64].S
is also turned into C code.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

powerpc: move pSeries files to arch/powerpc/platforms/pseries

Signed-off-by: Paul Mackerras <paulus@samba.org>